Merge pull request #1035 from qitechgmbh/changelog-2.13

added ChangeLog

.github/workflows/electron.yml

@@ -3,50 +3,73 @@ name: Electron
 on:
   push:
     branches:
-      - "**"
+      - master
   pull_request:
     branches:
-      - "*"
+      - master
+
+defaults:
+  run:
+    working-directory: electron
 
 jobs:
-  build-electron:
+  build:
     runs-on: ubuntu-latest
-    defaults:
-      run:
-        working-directory: electron
 
     steps:
-      - name: Setup Node.js
+      - &checkout
+        name: Checkout
+        uses: actions/checkout@v4
+
+      - &setup-node
+        name: Setup Node.js
         uses: actions/setup-node@v4
         with:
-          node-version: "18" # or '20' for latest LTS
+          node-version: 20
+          cache: "npm"
+          cache-dependency-path: |
+            electron/package-lock.json
 
-      - uses: actions/checkout@v4
+      - &install
+        name: Install dependencies
+        run: npm ci
 
-      - name: Cache NPM dependencies
-        uses: actions/cache@v3
-        with:
-          path: |
-            ~/.npm
-            node_modules/
-          key: ${{ runner.os }}-npm-${{ hashFiles('**/package-lock.json') }}
-          restore-keys: |
-            ${{ runner.os }}-npm-
-
-      - name: Install
-        run: npm i
-
-      - name: Build
+      - name: Compile
         run: tsc
 
-      - name: Format
-        run: npm run format
+      - name: Build
+        run: npm run build
 
-      - name: Lint
-        run: npm run lint
+  test:
+    runs-on: ubuntu-latest
+    needs: build
+
+    steps:
+      - *checkout
+      - *setup-node
+      - *install
 
       - name: Test
         run: npm run test
 
-      - name: Package
-        run: npm run package
+  format:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *setup-node
+      - *install
+
+      - name: Format
+        run: npm run format
+
+  lint:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *setup-node
+      - *install
+
+      - name: Lint
+        run: npm run lint

.github/workflows/nix.yml

@@ -0,0 +1,96 @@
+name: Nix CI
+
+on:
+  push:
+    branches:
+      - master
+  pull_request:
+    branches:
+      - master
+
+env:
+  NIX_PATH: nixpkgs=channel:nixos-25.05
+
+jobs:
+  electron:
+    runs-on: ubuntu-latest
+
+    steps:
+      - &checkout
+        name: Check out repository
+        uses: actions/checkout@v4
+
+      - &nix-install
+        uses: nixbuild/nix-quick-install-action@v34
+        with:
+          nix_conf: |
+            keep-env-derivations = true
+            keep-outputs = true
+
+      - uses: nix-community/cache-nix-action@v6
+        with:
+          primary-key: nix-electron-${{ runner.os }}-${{ hashFiles('**/*.nix', '**/flake.lock', './electron/package-lock.json') }}
+          restore-prefixes-first-match: nix-${{ runner.os }}-
+          purge: true
+          purge-prefixes: nix-electron-${{ runner.os }}-
+
+      - name: Build Electron in Nix
+        run: nix build ".#packages.x86_64-linux.electron"
+
+  rust:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - uses: nix-community/cache-nix-action@v6
+        with:
+          primary-key: nix-server-${{ runner.os }}-${{ hashFiles('**/*.nix', '**/flake.lock', './Cargo.lock') }}
+          restore-prefixes-first-match: nix-${{ runner.os }}-
+          purge: true
+          purge-prefixes: nix-server-${{ runner.os }}-
+
+      - name: Build Server in Nix
+        run: nix build ".#packages.x86_64-linux.server"
+
+  build:
+    runs-on: ubuntu-latest
+    needs: [electron, rust]
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - name: Use both Electron and Server Nix Store
+        uses: nix-community/cache-nix-action@v6
+        with:
+          primary-key: nix-${{ runner.os }}-${{ hashFiles('**/*.nix', '**/flake.lock', './Cargo.lock', './electron/package-lock.json') }}
+
+          # if no hit on the primary key, merge individual caches
+          restore-prefixes-all-matches: |
+            nix-electron-${{ runner.os }}-
+            nix-server-${{ runner.os }}-
+
+      - name: Build Flake and System Configuration
+        run: nix build ".#nixosConfigurations.nixos.config.system.build.toplevel" --impure
+
+  format:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - name: Format
+        run: nix run 'nixpkgs#nixfmt-classic' $(find . nixos -name '*.nix')
+
+  check:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - name: Build Flake and Configuration.nix
+        run: nix flake check "." --impure

.github/workflows/rust.yml

@@ -3,9 +3,10 @@ name: Rust
 on:
   push:
     branches:
-      - "**"
+      - master
   pull_request:
-    branches: "*"
+    branches:
+      - master
 
 env:
   CARGO_TERM_COLOR: always
@@ -16,14 +17,24 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - name: Install libudev development package
+      - &udev-install
+        name: Install libudev development package
         run: sudo apt-get update && sudo apt-get install -y libudev-dev
-      - uses: actions/checkout@v4
-      - name: Set Rust version
-        run: rustup override set ${{ env.RUST_VERSION }}
-      - name: Install Formatter
-        run: rustup component add rustfmt
-      - name: Cache Rust dependencies
+
+      - &checkout
+        uses: actions/checkout@v4
+
+      - &setup-rust
+        name: Install Rust toolchain
+        uses: actions-rs/toolchain@v1
+        with:
+          toolchain: ${{ env.RUST_VERSION }}
+          profile: minimal
+          override: true
+          components: rustfmt
+
+      - &cargo-cache
+        name: Cache Rust dependencies
         uses: actions/cache@v3
         with:
           path: |
@@ -41,8 +52,36 @@ jobs:
           RUSTFLAGS: "-D warnings"
         run: cargo build --verbose
 
+  format:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *setup-rust
+
       - name: Format
         run: cargo fmt --check --verbose
 
+  test:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *udev-install
+      - *checkout
+      - *setup-rust
+      - *cargo-cache
+
       - name: Run tests
         run: cargo test --verbose
+
+  mock:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *udev-install
+      - *checkout
+      - *setup-rust
+      - *cargo-cache
+
+      - name: Mock Machine
+        run: cargo build --features "development-build,mock-machine"

.gitignore

@@ -4,4 +4,7 @@ dist/
 Cargo.lock
 dhat-heap.json
 build.sh
-
+shell.nix
+node_modules/
+runtime_metrics.csv
+compile_metrics.csv

CHANGELOG.md

@@ -1,3 +1,40 @@
+# `2.13.0`
+_07.01.2026_
+
+## General
+- [#925](https://github.com/qitechgmbh/control/pull/925) Switch to Setup when selected machine is disconnected
+- [#937](https://github.com/qitechgmbh/control/pull/937) Added minimal Support for WAGO 
+- [#945](https://github.com/qitechgmbh/control/pull/945) Improvements for On-Screen Keyboard usage in Ethercat Setup Page
+- []
+
+## Extruder V3
+- [#930](https://github.com/qitechgmbh/control/pull/930) Added Extruder V3
+
+## Laser
+- [#924](https://github.com/qitechgmbh/control/pull/924) Roundness is now displayed as a percentage
+- [#885](https://github.com/qitechgmbh/control/pull/885) Added Min and Max Diameter
+- [#849](https://github.com/qitechgmbh/control/pull/849) Added a Warning if Filament is out of Spec
+
+## Aquapath
+- [#976](https://github.com/qitechgmbh/control/pull/976) Improved Stability
+
+
+# `2.12.0`
+_17.11.2025_
+
+## General
+- [#847](https://github.com/qitechgmbh/control/pull/847) Improved discovery and initialization 
+- [#859](https://github.com/qitechgmbh/control/pull/859) Improved update speed
+- [#897](https://github.com/qitechgmbh/control/pull/897), [#899](https://github.com/qitechgmbh/control/pull/899), [#852](https://github.com/qitechgmbh/control/pull/852)  Improved system stability
+- [#817](https://github.com/qitechgmbh/control/pull/817) Added an update bar
+
+## Laser
+- [#857](https://github.com/qitechgmbh/control/pull/857) Fixed potential issues with 2 Axis Laser
+
+## Extruder V2
+- [#881](https://github.com/qitechgmbh/control/pull/881) Extended Temperature PID Configuration
+
+
 # `2.11.0`
 _21.10.2025_
 

Cargo.toml

@@ -4,8 +4,11 @@ members = [
     "ethercat-hal",
     "ethercat-hal-derive",
     "control-core",
-    "ethercat-eeprom-dump",
+    "machines",
+    #"ethercat-eeprom-dump",
     "control-core-derive",
+    "units",
+    "utils",
 ]
 exclude = []
 resolver = "2"

README.md

@@ -2,7 +2,12 @@
 
 # QiTech Control
 
-QiTech Control is an industrial control panel software for the next generation of QiTech recycling machines built on top of Beckhoff Automation hardware.
+QiTech Control is an open-source framework designed to bring modern software paradigms to certified industrial hardware.
+
+It frees developers from proprietary, license-heavy PLC ecosystems and rigid "point-and-click" workflows that are no longer adequate for today's complex automation challenges.
+
+QiTech Control combines the modularity and reliability of standard EtherCAT terminals (e.g., WAGO, Beckhoff) with the power of a modern Rust & React stack.
+
 
 [![](https://img.youtube.com/vi/KI3YeBwfV-s/maxresdefault.jpg)](https://www.youtube.com/watch?v=KI3YeBwfV-s)
 *Click here to watch a video demo of our software.*
@@ -35,7 +40,7 @@ Other
 
 ## Backend
 
-To interface with Beckhoff and other EtherCAT devices we need an EtherCAT master stoftware. Possibilities are [PySOEM](https://github.com/bnjmnp/pysoem) (Python), [SOEM](https://github.com/OpenEtherCATsociety/SOEM) (C) and [Ethercrab](https://github.com/ethercrab-rs/ethercrab) (Rust). For realtime operation only C and Rust are suitable. We chose Rust because of safety and confidence in the written code.
+To interface with Beckhoff and other EtherCAT devices we need an EtherCAT master software. Possibilities are [PySOEM](https://github.com/bnjmnp/pysoem) (Python), [SOEM](https://github.com/OpenEtherCATsociety/SOEM) (C) and [Ethercrab](https://github.com/ethercrab-rs/ethercrab) (Rust). For realtime operation only C and Rust are suitable. We chose Rust because of safety and confidence in the written code.
 
 [SocketIO](https://socket.io/) was chosen for performant event driven communication from the backend to the server. But we still use REST with [axum](https://docs.rs/axum/latest/axum/) for the communication thet benefits from the request/response model.
 
@@ -74,6 +79,15 @@ We could combine the code of the frontend and backend using [Doxius](https://dio
 | Laser        | V1      | ???          | Diameter Measuring Laser    | -                                                      | 1 (Qitech Industries GmbH) | 6          | Yes         |                                 |
 | Mock         | -       | ???          | Mock Machine for Testing    | -                                                      | 1 (Qitech Industries GmbH) | 7          | Yes         | -                               |
 
+# Minimal Hardware Examples
+
+For complete step-by-step tutorials on setting up your first hardware, including wiring diagrams and software configuration, see the [Getting Started Guide](./docs/developer-docs/getting-started.md#minimal-hardware-examples).
+
+Available examples:
+- **LED Control with EL2004** - Digital output control (simplest setup)
+- **Analog Input with EL3021** - Reading analog current measurements
+
+
 # More Docs
 
 - [x] [Architecture & Data Flow](./docs/architecture-overview.md)

compile_metrics.sh

@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+BUILD_DIR="${BUILD_DIR:-target}"
+CSV_FILE="${CSV_FILE:-compile_metrics.csv}"
+DEFAULT_PKG="server"
+
+if [ "$#" -eq 0 ]; then
+  set -- cargo build
+fi
+
+if [ "${1:-}" = "cargo" ] && [ "${2:-}" = "build" ]; then
+  cargo clean
+  BUILD_CMD=(cargo rustc -p "$DEFAULT_PKG")
+  shift 2
+  BUILD_CMD+=("$@")
+  BUILD_CMD+=(-- --emit=llvm-ir -C debuginfo=0)
+else
+  BUILD_CMD=("$@")
+fi
+
+compile_start_ns=$(date +%s%N)
+"${BUILD_CMD[@]}"
+compile_end_ns=$(date +%s%N)
+compile_ms=$(( (compile_end_ns - compile_start_ns) / 1000000 ))
+
+if [ -d "$BUILD_DIR" ]; then
+  llvm_ir_lines=$(
+    find "$BUILD_DIR" -type f -name '*.ll' -print0 \
+      | xargs -0 cat \
+      | wc -l
+  )
+else
+  llvm_ir_lines=0
+fi
+
+bin_path=""
+
+if [ -n "${BINARY_PATH:-}" ] && [ -f "$BINARY_PATH" ]; then
+  bin_path="$BINARY_PATH"
+elif [ -f "./target/release/server" ]; then
+  bin_path="./target/release/server"
+elif [ -f "./target/debug/server" ]; then
+  bin_path="./target/debug/server"
+elif [ -f "./server/target/release/server" ]; then
+  bin_path="./server/target/release/server"
+elif [ -f "./server/target/debug/server" ]; then
+  bin_path="./server/target/debug/server"
+fi
+
+if [ -n "$bin_path" ]; then
+  binary_size_bytes=$(stat -c '%s' "$bin_path")
+else
+  binary_size_bytes=0
+fi
+
+finished_timestamp_ms=$(($(date +%s%N) / 1000000))
+finished_datetime=$(date -Iseconds)
+
+if [ ! -f "$CSV_FILE" ]; then
+  echo "datetime,finished_timestamp_ms,compile_ms,llvm_ir_lines,binary_size_bytes" > "$CSV_FILE"
+fi
+
+echo "${finished_datetime},${finished_timestamp_ms},${compile_ms},${llvm_ir_lines},${binary_size_bytes}" \
+  >> "$CSV_FILE"
+
+echo "Metrics recorded in $CSV_FILE"

control-core/Cargo.toml

@@ -12,18 +12,16 @@ anyhow = "1.0.100"
 axum = "0.8.6"
 
 ethercat_hal = { path = "../ethercat-hal" }
+units = { path = "../units" }
 ethercrab = "0.6"
 interfaces = "0.0.9"
 serde = "1.0.219"
-serde_json = "1.0.143"
 serialport = "4.7.3"
 smol = "2.0.2"
 socketioxide = "0.17.2"
-uom = { version = "0.36.0", default-features = false, features = ["f64"] }
 bitvec = { version = "1.0.1", features = ["alloc"] }
 crc = "3.3.0"
-serial = "0.4.0"
-tracing = "0.1.41"
+tracing = "0.1.44"
 erased-serde = "0.4.8"
 core_affinity = "0.8.3"
 control_core_derive = { version = "0.1.0", path = "../control-core-derive" }

control-core/src/controllers/first_degree_motion/angular_acceleration_speed_controller.rs

@@ -1,6 +1,6 @@
 use std::time::Instant;
 
-use uom::si::{
+use units::{
     angular_acceleration::radian_per_second_squared,
     angular_velocity::radian_per_second,
     f64::{AngularAcceleration, AngularVelocity},

control-core/src/controllers/first_degree_motion/linear_acceleration_speed_controller.rs

@@ -1,6 +1,6 @@
 use std::time::Instant;
 
-use uom::si::{
+use units::{
     acceleration::meter_per_second_squared,
     f64::{Acceleration, Velocity},
     velocity::meter_per_second,

control-core/src/controllers/second_degree_motion/angular_acceleration_position_controller.rs

@@ -1,6 +1,6 @@
 use std::time::Instant;
 
-use uom::si::{
+use units::{
     angle::radian,
     angular_acceleration::radian_per_second_squared,
     angular_velocity::radian_per_second,
@@ -199,8 +199,8 @@ impl AngularAccelerationPositionController {
     /// # Example
     /// ```ignore
     /// use control_core::controllers::second_degree_motion::angular_acceleration_position_controller::AngularAccelerationPositionController;
-    /// use uom::si::f64::Angle;
-    /// use uom::si::angle::degree;
+    /// use units::f64::Angle;
+    /// use units::angle::degree;
     ///
     /// let mut controller = AngularAccelerationPositionController::new_simple(
     ///     Some(Angle::new::<degree>(180.0)),

control-core/src/controllers/second_degree_motion/angular_jerk_speed_controller.rs

@@ -1,6 +1,6 @@
 use std::time::Instant;
 
-use uom::si::{
+use units::{
     angular_acceleration::radian_per_second_squared,
     angular_jerk::radian_per_second_cubed,
     angular_velocity::radian_per_second,
@@ -23,7 +23,7 @@ use super::jerk_speed_controller::JerkSpeedController;
 ///
 /// # Example
 /// ```ignore
-/// use uom::si::{
+/// use units::{
 ///     angular_velocity::revolution_per_minute,
 ///     angular_acceleration::revolution_per_minute_per_second,
 ///     angular_jerk::revolution_per_minute_per_second_squared,
@@ -65,7 +65,7 @@ impl AngularJerkSpeedController {
     ///
     /// # Example
     /// ```ignore
-    /// use uom::si::{
+    /// use units::{
     ///     angular_velocity::revolution_per_minute,
     ///     angular_acceleration::revolution_per_minute_per_second,
     ///     angular_jerk::revolution_per_minute_per_second_squared,
@@ -127,7 +127,7 @@ impl AngularJerkSpeedController {
     ///
     /// # Example
     /// ```ignore
-    /// use uom::si::{
+    /// use units::{
     ///     angular_velocity::revolution_per_minute,
     ///     angular_acceleration::revolution_per_minute_per_second,
     ///     angular_jerk::revolution_per_minute_per_second_squared,
@@ -185,7 +185,7 @@ impl AngularJerkSpeedController {
     /// # Example
     /// ```ignore
     /// use std::time::Instant;
-    /// use uom::si::{angular_velocity::revolution_per_minute, f64::AngularVelocity};
+    /// use units::{angular_velocity::revolution_per_minute, f64::AngularVelocity};
     ///
     /// let mut controller = AngularJerkSpeedController::new_simple(/* ... */);
     /// let target = AngularVelocity::new::<revolution_per_minute>(1500.0);

control-core/src/controllers/second_degree_motion/linear_acceleration_position_controller.rs

@@ -1,6 +1,6 @@
 use std::time::Instant;
 
-use uom::si::{
+use units::{
     acceleration::meter_per_second_squared,
     f64::{Acceleration, Length, Velocity},
     length::meter,
@@ -22,8 +22,8 @@ use super::acceleration_position_controller::{
 ///
 /// # Example
 /// ```ignore
-/// use uom::si::{length::meter, velocity::meter_per_second, acceleration::meter_per_second_squared};
-/// use uom::si::f64::{Length, Velocity, Acceleration};
+/// use units::{length::meter, velocity::meter_per_second, acceleration::meter_per_second_squared};
+/// use units::f64::{Length, Velocity, Acceleration};
 ///
 /// let position_limit = Length::new::<meter>(10.0);
 /// let max_speed = Velocity::new::<meter_per_second>(2.0);
@@ -101,8 +101,8 @@ impl LinearAccelerationPositionController {
     ///
     /// # Example
     /// ```ignore
-    /// use uom::si::{length::meter, velocity::meter_per_second, acceleration::meter_per_second_squared};
-    /// use uom::si::f64::{Length, Velocity, Acceleration};
+    /// use units::{length::meter, velocity::meter_per_second, acceleration::meter_per_second_squared};
+    /// use units::f64::{Length, Velocity, Acceleration};
     ///
     /// let position_limit = Length::new::<meter>(5.0);  // Creates [-5.0, +5.0] meter range
     /// let max_speed = Velocity::new::<meter_per_second>(1.0);  // Creates [-1.0, +1.0] m/s range
@@ -150,7 +150,7 @@ impl LinearAccelerationPositionController {
     /// # Example
     /// ```ignore
     /// use std::time::Instant;
-    /// use uom::si::{length::meter, f64::Length};
+    /// use units::{length::meter, f64::Length};
     ///
     /// let mut controller = LinearAccelerationPositionController::new_simple(
     ///     Some(Length::new::<meter>(10.0)),
@@ -375,7 +375,7 @@ impl LinearAccelerationPositionController {
     ///
     /// # Example
     /// ```ignore
-    /// use uom::si::{length::meter, velocity::meter_per_second, f64::{Length, Velocity}};
+    /// use units::{length::meter, velocity::meter_per_second, f64::{Length, Velocity}};
     ///
     /// let new_position = Length::new::<meter>(0.0);
     ///

control-core/src/controllers/second_degree_motion/linear_jerk_speed_controller.rs

@@ -1,6 +1,6 @@
 use std::time::Instant;
 
-use uom::si::{
+use units::{
     acceleration::meter_per_second_squared,
     f64::{Acceleration, Jerk, Velocity},
     jerk::meter_per_second_cubed,
@@ -23,7 +23,7 @@ use super::jerk_speed_controller::JerkSpeedController;
 ///
 /// # Example
 /// ```ignore
-/// use uom::si::{
+/// use units::{
 ///     velocity::meter_per_second,
 ///     acceleration::meter_per_second_squared,
 ///     jerk::meter_per_second_cubed,
@@ -65,7 +65,7 @@ impl LinearJerkSpeedController {
     ///
     /// # Example
     /// ```ignore
-    /// use uom::si::{
+    /// use units::{
     ///     velocity::meter_per_second,
     ///     acceleration::meter_per_second_squared,
     ///     jerk::meter_per_second_cubed,
@@ -127,7 +127,7 @@ impl LinearJerkSpeedController {
     ///
     /// # Example
     /// ```ignore
-    /// use uom::si::{
+    /// use units::{
     ///     velocity::meter_per_second,
     ///     acceleration::meter_per_second_squared,
     ///     jerk::meter_per_second_cubed,

control-core/src/converters/angle_converter.rs

@@ -1,4 +1,4 @@
-use uom::si::{angle::radian, f64::Angle};
+use units::{angle::radian, f64::Angle};
 
 #[derive(Debug, Clone, Copy, PartialEq, Eq)]
 pub struct AngleConverter {

control-core/src/converters/angular_step_converter.rs

@@ -1,4 +1,4 @@
-use uom::si::{
+use units::{
     angle::revolution,
     angular_acceleration::radian_per_second_squared,
     angular_velocity::revolution_per_second,
@@ -90,7 +90,7 @@ mod tests {
     use super::*;
     use approx::assert_relative_eq;
     use std::f64::EPSILON;
-    use uom::si::{
+    use units::{
         angle::degree, angular_acceleration::degree_per_second_squared,
         angular_velocity::degree_per_second,
     };

control-core/src/converters/circular_converter.rs

@@ -14,14 +14,14 @@
 //!
 //! ```rust
 //! use control_core::converters::circular_converter::CircularConverter;
-//! use uom::si::{f64::{Length, Velocity}, length::meter, velocity::meter_per_second};
+//! use units::{f64::{Length, Velocity}, length::meter, velocity::meter_per_second};
 //!
 //! let converter = CircularConverter::from_radius(Length::new::<meter>(0.1));
 //! let velocity = Velocity::new::<meter_per_second>(1.0);
 //! let angular_velocity = converter.linear_to_angular_velocity(velocity);
 //! ```
 
-use uom::si::{
+use units::{
     acceleration::meter_per_second_squared,
     angle::radian,
     angular_acceleration::radian_per_second_squared,
@@ -199,7 +199,7 @@ impl CircularConverter {
 #[cfg(test)]
 mod tests {
     use super::*;
-    use uom::si::length::centimeter;
+    use units::length::centimeter;
 
     #[test]
     fn test_constructors() {

control-core/src/converters/linear_step_converter.rs

@@ -1,4 +1,4 @@
-use uom::si::{
+use units::{
     angle::revolution,
     angular_velocity::revolution_per_second,
     f64::{Acceleration, Angle, AngularAcceleration, AngularVelocity, Length, Velocity},
@@ -251,7 +251,7 @@ mod tests {
     use super::*;
     use approx::assert_relative_eq;
     use std::f64::EPSILON;
-    use uom::si::{
+    use units::{
         acceleration::meter_per_second_squared, angular_acceleration::radian_per_second_squared,
         length::meter, velocity::meter_per_second,
     };

control-core/src/ethercat/interface_discovery.rs

@@ -1,10 +1,9 @@
-use std::{process::Command, sync::Arc, time::Duration};
-
 use ethercrab::{
     MainDevice, MainDeviceConfig, PduStorage, Timeouts,
     std::{ethercat_now, tx_rx_task},
 };
 use interfaces::Interface;
+use std::{process::Command, sync::Arc, time::Duration};
 
 // Constants for EtherCAT configuration
 const IFACE_DISCOVERY_MAX_SUBDEVICES: usize = 16; // Must be power of 2 > 1
@@ -92,9 +91,6 @@ pub async fn discover_ethercat_interface() -> Result<String, anyhow::Error> {
     let mut interface: Option<&str> = None;
 
     for i in 0..interfaces.len() {
-        // Avoid NetworkManager hangups
-        set_interface_managed(&interfaces[i].name, false);
-
         match test_interface(&interfaces[i].name) {
             Ok(_) => {
                 // if interface found with ethercat Exit early, we expect only one interface with ethercat
@@ -107,7 +103,7 @@ pub async fn discover_ethercat_interface() -> Result<String, anyhow::Error> {
 
     for i in 0..interfaces.len() {
         if interface.is_some() && interface.unwrap() == &interfaces[i].name {
-            continue;
+            set_interface_managed(&interfaces[i].name, false);
         } else {
             set_interface_managed(&interfaces[i].name, true);
         }

control-core/src/ethercat/mod.rs

@@ -1,2 +1 @@
-pub mod eeprom_identification;
 pub mod interface_discovery;

control-core/src/lib.rs

@@ -4,17 +4,11 @@ pub mod downcast;
 pub mod ethercat;
 pub mod helpers;
 pub mod irq_handling;
-pub mod machines;
 pub mod modbus;
 pub mod realtime;
-pub mod rest;
 pub mod serial;
 pub mod socketio;
 pub mod transmission;
-pub mod uom_extensions;
 
 #[cfg(feature = "video-streaming")]
 pub mod video_streaming;
-
-#[macro_use]
-extern crate uom;

control-core/src/machines/api.rs

@@ -1,27 +0,0 @@
-use serde_json::Value;
-use smol::lock::Mutex;
-use std::sync::Arc;
-
-use crate::socketio::namespace::Namespace;
-
-pub trait MachineApi {
-    fn api_mutate(&mut self, value: Value) -> Result<(), anyhow::Error>;
-    fn api_event_namespace(&mut self) -> Arc<Mutex<Namespace>>;
-
-    /// Returns a list of available video stream identifiers for this machine
-    #[cfg(feature = "video-streaming")]
-    fn api_video_streams(&self) -> Vec<String> {
-        Vec::new()
-    }
-
-    /// Get a video stream receiver for the specified stream ID
-    /// Returns None if the stream doesn't exist
-    #[cfg(feature = "video-streaming")]
-    fn api_get_video_stream(
-        &mut self,
-        stream_id: &str,
-    ) -> Option<tokio::sync::broadcast::Receiver<Vec<u8>>> {
-        let _ = stream_id;
-        None
-    }
-}

control-core/src/machines/connection.rs

@@ -1,208 +0,0 @@
-use crate::downcast::Downcast;
-use crate::machines::identification::MachineIdentificationUnique;
-use crate::machines::manager::MachineManager;
-use crate::socketio::{event::GenericEvent, namespace::Namespace};
-use serde::Serialize;
-use smol::block_on;
-use smol::lock::RwLock;
-use std::sync::Arc;
-use std::sync::Weak;
-
-use super::Machine;
-use anyhow::anyhow;
-use smol::{channel::Sender, lock::Mutex};
-use socketioxide::extract::SocketRef;
-
-#[derive(Debug)]
-pub enum MachineConnection<M: Machine + ?Sized>
-where
-    Self: Sized,
-{
-    Error(anyhow::Error),
-    Disconnected,
-    Connected(Arc<Mutex<M>>),
-}
-
-#[derive(Debug)]
-pub struct MachineSlot<M: Machine + ?Sized>
-where
-    Self: Sized,
-{
-    pub machine_connection: MachineConnection<M>,
-    pub namespace: Arc<Mutex<Namespace>>,
-}
-
-pub type MachineConnectionGeneric = MachineConnection<dyn Machine>;
-
-pub type MachineSlotGeneric = MachineSlot<dyn Machine>;
-
-impl<M: Machine> Clone for MachineConnection<M> {
-    fn clone(&self) -> Self {
-        match self {
-            Self::Connected(m) => Self::Connected(m.clone()),
-            Self::Error(e) => Self::Error(anyhow!(e.to_string())),
-            Self::Disconnected => Self::Disconnected,
-        }
-    }
-}
-
-impl<M: Machine + ?Sized> MachineConnection<M> {
-    pub fn to_error(&self) -> Option<anyhow::Error> {
-        match self {
-            MachineConnection::Error(err) => Some(anyhow!(err.to_string())),
-            Self::Disconnected => Some(anyhow!("Machine is disconnected")),
-            _ => None,
-        }
-    }
-
-    pub fn to_machine(&self) -> Option<Arc<Mutex<M>>> {
-        match self {
-            Self::Connected(machine) => Some(machine.clone()),
-            _ => None,
-        }
-    }
-}
-
-impl<M: Machine + ?Sized> MachineSlot<M> {
-    pub fn new(socket_queue_tx: Sender<(SocketRef, Arc<GenericEvent>)>) -> Self {
-        let namespace = Namespace::new(socket_queue_tx);
-        Self {
-            machine_connection: MachineConnection::Disconnected,
-            namespace: Arc::new(Mutex::new(namespace)),
-        }
-    }
-
-    pub const fn is_connected(&self) -> bool {
-        matches!(self.machine_connection, MachineConnection::Connected(_))
-    }
-}
-
-pub trait CrossConnectableMachine<
-    F: CrossConnectableMachine<F, T>,
-    T: CrossConnectableMachine<T, F>,
->: Machine
-{
-    fn get_cross_connection(&mut self) -> &mut MachineCrossConnection<F, T>;
-}
-
-#[derive(Debug)]
-pub struct MachineCrossConnection<
-    F: CrossConnectableMachine<F, T>,
-    T: CrossConnectableMachine<T, F>,
-> {
-    machine_manager: Weak<RwLock<MachineManager>>,
-    machine_identification_unique: MachineIdentificationUnique,
-    connected_machine: Weak<Mutex<MachineSlot<T>>>,
-    _make_compiler_happy: std::marker::PhantomData<F>, // This marks tells the typechecker, that we
-                                                       // need F in our type arguemnts. We are ok with
-                                                       // it being used only in a fake field. Without
-                                                       // F being fixed, we would not be anble to implement
-                                                       // reverse connecting and disconnecting properly,
-                                                       // as the type on the other side would decay
-                                                       // to an unknown type. See also https://github.com/qitechgmbh/control/pull/625#discussion_r2379566315
-}
-
-#[derive(Serialize, Debug, Clone, Default)]
-pub struct MachineCrossConnectionState {
-    /// Connected Machine
-    pub machine_identification_unique: Option<MachineIdentificationUnique>,
-    pub is_available: bool,
-}
-
-impl<F: CrossConnectableMachine<F, T>, T: CrossConnectableMachine<T, F>>
-    MachineCrossConnection<F, T>
-{
-    pub fn new(
-        manager: Weak<RwLock<MachineManager>>,
-        machine_identification_unique: &MachineIdentificationUnique,
-    ) -> Self {
-        Self {
-            machine_manager: manager,
-            connected_machine: Weak::new(),
-            machine_identification_unique: machine_identification_unique.clone(),
-            _make_compiler_happy: std::marker::PhantomData,
-        }
-    }
-
-    pub fn set_connected_machine(
-        &mut self,
-        machine_identification_unique: &MachineIdentificationUnique,
-    ) {
-        if let Some(machine_manager) = self.machine_manager.upgrade() {
-            let machine_manager = block_on(machine_manager.read());
-
-            let slot: Arc<Mutex<MachineSlotGeneric>> =
-                match machine_manager.get(&machine_identification_unique) {
-                    Some(c) => c,
-                    None => return,
-                };
-
-            let slot: Arc<Mutex<MachineSlot<T>>> = match Downcast::downcast(&slot) {
-                Ok(s) => s,
-                Err(_) => return,
-            };
-
-            self.connected_machine = Arc::downgrade(&slot);
-        } else {
-            panic!("The machine manager has died, cannot do anything at this point");
-        }
-    }
-
-    pub fn reverse_connect(&self) {
-        if let Some(slot) = self.connected_machine.upgrade() {
-            let slot = &mut slot.lock_blocking();
-
-            if let MachineConnection::Connected(machine) = &slot.machine_connection {
-                let mut machine = machine.lock_blocking();
-                let cross_connection = machine.get_cross_connection();
-
-                if !cross_connection.is_connected() {
-                    cross_connection.set_connected_machine(&self.machine_identification_unique);
-                }
-            };
-        }
-    }
-
-    pub fn disconnect(&mut self) {
-        self.connected_machine = Weak::new();
-    }
-
-    pub fn reverse_disconnect(&mut self) {
-        if let Some(slot) = self.connected_machine.upgrade() {
-            let slot = slot.lock_blocking();
-
-            if let MachineConnection::Connected(machine) = &slot.machine_connection {
-                let mut machine = machine.lock_blocking();
-                let cross_connection = machine.get_cross_connection();
-                cross_connection.disconnect();
-            };
-        }
-    }
-
-    pub fn is_connected(&self) -> bool {
-        let arc = self.connected_machine.upgrade();
-        arc.is_some()
-    }
-
-    pub fn to_state(&self) -> MachineCrossConnectionState {
-        if let Some(slot) = self.connected_machine.upgrade() {
-            let connection = &slot.lock_blocking().machine_connection;
-
-            if let MachineConnection::Connected(machine) = connection {
-                let machine = machine.lock_blocking();
-
-                return MachineCrossConnectionState {
-                    machine_identification_unique: Some(
-                        machine.get_machine_identification_unique(),
-                    ),
-                    is_available: true,
-                };
-            }
-        }
-
-        MachineCrossConnectionState {
-            machine_identification_unique: None,
-            is_available: false,
-        }
-    }
-}

control-core/src/machines/identification.rs

@@ -1,113 +0,0 @@
-use std::fmt::Display;
-
-use serde::Deserialize;
-use serde::Serialize;
-
-/// Identifies a spacifi machine
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq, Hash)]
-pub struct MachineIdentificationUnique {
-    pub machine_identification: MachineIdentification,
-    pub serial: u16,
-}
-
-impl MachineIdentificationUnique {
-    /// Check if values are non-zero
-    pub const fn is_valid(&self) -> bool {
-        self.machine_identification.is_valid() && self.serial != 0
-    }
-}
-
-impl Display for MachineIdentificationUnique {
-    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
-        write!(
-            f,
-            "{}/{}/{}",
-            self.machine_identification.vendor, self.machine_identification.machine, self.serial
-        )
-    }
-}
-
-/// Identifies a machine
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq, Hash)]
-pub struct MachineIdentification {
-    pub vendor: u16,
-    pub machine: u16,
-}
-
-impl MachineIdentification {
-    /// Check if values are non-zero
-    pub const fn is_valid(&self) -> bool {
-        self.vendor != 0 && self.machine != 0
-    }
-}
-
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
-pub struct DeviceMachineIdentification {
-    pub machine_identification_unique: MachineIdentificationUnique,
-    pub role: u16,
-}
-
-impl DeviceMachineIdentification {
-    /// Check if values are non-zero
-    pub const fn is_valid(&self) -> bool {
-        self.machine_identification_unique.is_valid()
-            && self
-                .machine_identification_unique
-                .machine_identification
-                .machine
-                != 0
-    }
-}
-
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
-pub struct DeviceIdentification {
-    pub device_machine_identification: Option<DeviceMachineIdentification>,
-    pub device_hardware_identification: DeviceHardwareIdentification,
-}
-
-impl From<DeviceIdentificationIdentified> for DeviceIdentification {
-    fn from(value: DeviceIdentificationIdentified) -> Self {
-        Self {
-            device_machine_identification: Some(value.device_machine_identification),
-            device_hardware_identification: value.device_hardware_identification,
-        }
-    }
-}
-
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
-pub struct DeviceIdentificationIdentified {
-    pub device_machine_identification: DeviceMachineIdentification,
-    pub device_hardware_identification: DeviceHardwareIdentification,
-}
-
-impl TryFrom<DeviceIdentification> for DeviceIdentificationIdentified {
-    type Error = anyhow::Error;
-
-    fn try_from(value: DeviceIdentification) -> Result<Self, Self::Error> {
-        let device_machine_identification =
-            value.device_machine_identification.ok_or(anyhow::anyhow!(
-                "[{}::DeviceIdentificationIdentified::try_from] No device machine identification",
-                module_path!()
-            ))?;
-
-        Ok(Self {
-            device_machine_identification,
-            device_hardware_identification: value.device_hardware_identification,
-        })
-    }
-}
-
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
-pub enum DeviceHardwareIdentification {
-    Ethercat(DeviceHardwareIdentificationEthercat),
-    Serial(DeviceHardwareIdentificationSerial),
-}
-
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
-pub struct DeviceHardwareIdentificationEthercat {
-    pub subdevice_index: usize,
-}
-#[derive(Debug, Clone, Serialize, Deserialize, PartialEq, Eq)]
-pub struct DeviceHardwareIdentificationSerial {
-    pub path: String,
-}

control-core/src/machines/manager.rs

@@ -1,297 +0,0 @@
-use super::{
-    Machine,
-    identification::{DeviceIdentification, DeviceIdentificationIdentified},
-    new::MachineNewHardwareSerial,
-    registry::MachineRegistry,
-};
-use smol::{
-    channel::Sender,
-    lock::{Mutex, RwLock},
-};
-use socketioxide::extract::SocketRef;
-
-use crate::{
-    machines::{
-        connection::{
-            MachineConnection, MachineConnectionGeneric, MachineSlot, MachineSlotGeneric,
-        },
-        identification::MachineIdentificationUnique,
-        new::{MachineNewHardware, MachineNewHardwareEthercat, MachineNewParams},
-    },
-    serial::SerialDevice,
-    socketio::event::GenericEvent,
-};
-use std::{
-    collections::HashMap,
-    sync::{Arc, Weak},
-};
-
-#[derive(Debug)]
-pub struct MachineManager {
-    pub ethercat_machines: HashMap<MachineIdentificationUnique, Arc<Mutex<MachineSlotGeneric>>>,
-    pub serial_machines: HashMap<MachineIdentificationUnique, Arc<Mutex<MachineSlotGeneric>>>,
-}
-
-impl Default for MachineManager {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
-impl MachineManager {
-    pub fn new() -> Self {
-        Self {
-            ethercat_machines: HashMap::new(),
-            serial_machines: HashMap::new(),
-        }
-    }
-
-    pub fn set_ethercat_devices<const MAX_SUBDEVICES: usize, const MAX_PDI: usize>(
-        &mut self,
-        device_identifications: &Vec<DeviceIdentification>,
-        machine_registry: &MachineRegistry,
-        hardware: &MachineNewHardwareEthercat,
-        socket_queue_tx: Sender<(SocketRef, Arc<GenericEvent>)>,
-        machine_manager: Weak<RwLock<Self>>,
-    ) {
-        // group devices by machine device identification
-        let device_grouping_result = group_devices_by_identification(device_identifications);
-
-        tracing::info!(
-            "Device Groups {}",
-            device_grouping_result.device_groups.len()
-        );
-
-        let machine_new_hardware = MachineNewHardware::Ethercat(hardware);
-
-        // iterate over all identified device groups but ignore unaffected machines
-        for device_group in device_grouping_result.device_groups.iter() {
-            // get the machine identification
-            let machine_identification_unique: MachineIdentificationUnique =
-                match device_group.first() {
-                    Some(device_identification) => device_identification
-                        .device_machine_identification
-                        .machine_identification_unique
-                        .clone(),
-                    None => continue, // Skip this group if empty
-                };
-
-            let slot =
-                self.get_or_create_slot(socket_queue_tx.clone(), machine_identification_unique);
-            let mut slot = slot.lock_blocking();
-
-            // create the machine
-            let new_machine = machine_registry.new_machine(&MachineNewParams {
-                device_group,
-                hardware: &machine_new_hardware,
-                socket_queue_tx: socket_queue_tx.clone(),
-                machine_manager: machine_manager.clone(),
-                namespace: slot.namespace.clone(),
-            });
-
-            slot.machine_connection = match new_machine {
-                Err(err) => MachineConnectionGeneric::Error(err),
-                Ok(machine) => MachineConnectionGeneric::Connected(machine),
-            };
-        }
-    }
-
-    fn get_or_create_slot(
-        &mut self,
-        socket_queue_tx: Sender<(SocketRef, Arc<GenericEvent>)>,
-        machine_identification: MachineIdentificationUnique,
-    ) -> Arc<Mutex<MachineSlotGeneric>> {
-        if let Some(slot) = self.get(&machine_identification) {
-            return slot;
-        }
-
-        let slot = Arc::new(Mutex::new(MachineSlot::new(socket_queue_tx)));
-        self.ethercat_machines
-            .insert(machine_identification, slot.clone());
-
-        return slot;
-    }
-
-    pub fn get(
-        &self,
-        machine_identification: &MachineIdentificationUnique,
-    ) -> Option<Arc<Mutex<MachineSlotGeneric>>> {
-        self.ethercat_machines
-            .get(machine_identification)
-            .or_else(|| self.serial_machines.get(machine_identification))
-            .map(|x| x.clone())
-    }
-
-    pub fn add_serial_device(
-        &mut self,
-        device_identification: &DeviceIdentification,
-        device: Arc<RwLock<dyn SerialDevice>>,
-        machine_registry: &MachineRegistry,
-        socket_queue_tx: Sender<(SocketRef, Arc<GenericEvent>)>,
-        machine_manager: Weak<RwLock<Self>>,
-    ) {
-        let hardware = MachineNewHardwareSerial { device };
-
-        let device_identification_identified: DeviceIdentificationIdentified =
-            device_identification
-                .clone()
-                .try_into()
-                .expect("Serial devices always have machine identification");
-
-        let machine_identification: MachineIdentificationUnique = device_identification_identified
-            .device_machine_identification
-            .machine_identification_unique
-            .clone();
-
-        let slot = self.get_or_create_slot(socket_queue_tx.clone(), machine_identification);
-        let mut slot = slot.lock_blocking();
-
-        let new_machine = machine_registry.new_machine(&MachineNewParams {
-            device_group: &vec![device_identification_identified.clone()],
-            hardware: &MachineNewHardware::Serial(&hardware),
-            socket_queue_tx,
-            machine_manager: machine_manager.clone(),
-            namespace: slot.namespace.clone(),
-        });
-
-        slot.machine_connection = match new_machine {
-            Err(err) => MachineConnectionGeneric::Error(err),
-            Ok(machine) => MachineConnectionGeneric::Connected(machine),
-        };
-
-        tracing::info!("Adding serial machine {:?}", slot);
-    }
-
-    pub fn remove_serial_device(&mut self, device_identification: &DeviceIdentification) {
-        let device_identification_identified: DeviceIdentificationIdentified =
-            device_identification
-                .clone()
-                .try_into()
-                .expect("Serial devices always have machine identification");
-
-        tracing::info!(
-            "Removing serial machine {:?}",
-            device_identification_identified
-        );
-
-        let machine_identification_unique = &device_identification_identified
-            .device_machine_identification
-            .machine_identification_unique;
-
-        if let Some(slot) = self.serial_machines.get(machine_identification_unique) {
-            let mut slot = slot.lock_blocking();
-            slot.machine_connection = MachineConnection::Disconnected;
-        }
-    }
-
-    pub fn get_ethercat_weak(
-        &self,
-        machine_identification: &MachineIdentificationUnique,
-    ) -> Option<Weak<Mutex<dyn Machine>>> {
-        self.get_weak(&self.ethercat_machines, machine_identification)
-    }
-
-    pub fn get_serial_weak(
-        &self,
-        machine_identification: &MachineIdentificationUnique,
-    ) -> Option<Weak<Mutex<dyn Machine>>> {
-        self.get_weak(&self.serial_machines, machine_identification)
-    }
-
-    fn get_weak(
-        &self,
-        machines: &HashMap<MachineIdentificationUnique, Arc<Mutex<MachineSlotGeneric>>>,
-        machine_identification: &MachineIdentificationUnique,
-    ) -> Option<Weak<Mutex<dyn Machine>>> {
-        let slot = machines.get(machine_identification).clone();
-
-        return slot.and_then(|slot| {
-            let connection = &slot.lock_blocking().machine_connection;
-            match connection {
-                MachineConnectionGeneric::Error(_) => None,
-                MachineConnectionGeneric::Disconnected => None,
-                MachineConnectionGeneric::Connected(machine) => Some(Arc::downgrade(&machine)),
-            }
-        });
-    }
-}
-
-/// Groups devices by machine identification
-///
-/// Returns a DeviceGroupingResult containing:
-/// - device_groups: a vector of devices grouped by machine identification
-/// - unidentified_devices: a vector of devices that could not be identified
-pub fn group_devices_by_identification(
-    device_identifications: &Vec<DeviceIdentification>,
-) -> DeviceGroupingResult {
-    let mut device_groups: Vec<Vec<DeviceIdentificationIdentified>> = Vec::new();
-    let mut unidentified_devices: Vec<DeviceIdentification> = Vec::new();
-
-    for device_identification in device_identifications {
-        // if vendor or serial or machine is 0, it is not a valid machine device
-        if let Some(device_machine_identification) =
-            device_identification.device_machine_identification.as_ref()
-        {
-            if !device_machine_identification.is_valid() {
-                unidentified_devices.push(device_identification.clone());
-
-                continue;
-            }
-        } else {
-            unidentified_devices.push(device_identification.clone());
-            continue;
-        }
-
-        // scan over all deice groups
-        // get the first DeviceMachineIdentification
-        // compare and append to the group
-        let mut found = false;
-        for check_group in device_groups.iter_mut() {
-            // get first device in group
-            let first_device = check_group.first().expect("group to not be empty");
-            let first_device_machine_identification = &first_device
-                .device_machine_identification
-                .machine_identification_unique;
-
-            // chek if it has machine identification
-            if let Some(device_machine_identification) =
-                device_identification.device_machine_identification.as_ref()
-            {
-                // compare with the current device
-                if first_device_machine_identification
-                    == &device_machine_identification.machine_identification_unique
-                {
-                    let device_identification_identified = device_identification
-                        .clone()
-                        .try_into()
-                        .expect("should have Some(DeviceMachineIdentification)");
-                    check_group.push(device_identification_identified);
-                    found = true;
-                    break;
-                }
-            }
-        }
-
-        if !found {
-            let device_identification_identified = device_identification
-                .clone()
-                .try_into()
-                .expect("should have Some(DeviceMachineIdentification)");
-            device_groups.push(vec![device_identification_identified]);
-        }
-    }
-
-    DeviceGroupingResult {
-        device_groups,
-        unidentified_devices,
-    }
-}
-
-/// Structure to hold the result of grouping devices by identification
-#[derive(Debug)]
-pub struct DeviceGroupingResult {
-    /// Devices grouped by machine identification
-    pub device_groups: Vec<Vec<DeviceIdentificationIdentified>>,
-    /// Devices that could not be identified
-    pub unidentified_devices: Vec<DeviceIdentification>,
-}

control-core/src/machines/manager_iter.rs

@@ -1,84 +0,0 @@
-use std::collections::HashMap;
-use std::sync::Arc;
-
-use smol::lock::Mutex;
-
-use crate::machines::connection::MachineSlotGeneric;
-
-use super::{identification::MachineIdentificationUnique, manager::MachineManager};
-
-pub enum MachineManagerIter<'a> {
-    EthercatMachines {
-        iter: std::collections::hash_map::Iter<
-            'a,
-            MachineIdentificationUnique,
-            Arc<Mutex<MachineSlotGeneric>>,
-        >,
-    },
-    SerialMachines {
-        iter: std::collections::hash_map::Iter<
-            'a,
-            MachineIdentificationUnique,
-            Arc<Mutex<MachineSlotGeneric>>,
-        >,
-    },
-    Done,
-}
-
-pub struct MachineManagerIterator<'a> {
-    iter: MachineManagerIter<'a>,
-    serial_machines: &'a HashMap<MachineIdentificationUnique, Arc<Mutex<MachineSlotGeneric>>>,
-}
-
-impl<'a> Iterator for MachineManagerIterator<'a> {
-    type Item = (
-        &'a MachineIdentificationUnique,
-        &'a Arc<Mutex<MachineSlotGeneric>>,
-    );
-
-    fn next(&mut self) -> Option<Self::Item> {
-        loop {
-            match &mut self.iter {
-                MachineManagerIter::EthercatMachines { iter } => {
-                    // Try to get the next item from ethercat_machines
-                    if let Some(item) = iter.next() {
-                        return Some(item);
-                    } else {
-                        // If ethercat_machines is exhausted, move to serial_machines
-                        self.iter = MachineManagerIter::SerialMachines {
-                            iter: self.serial_machines.iter(),
-                        };
-                        // Continue to the next iteration of the loop
-                        continue;
-                    }
-                }
-                MachineManagerIter::SerialMachines { iter } => {
-                    // Return the next item from serial_machines or None if exhausted
-                    if let Some(item) = iter.next() {
-                        return Some(item);
-                    } else {
-                        // If serial_machines is also exhausted, we're done
-                        self.iter = MachineManagerIter::Done;
-                        return None;
-                    }
-                }
-                MachineManagerIter::Done => {
-                    // We've exhausted both collections
-                    return None;
-                }
-            }
-        }
-    }
-}
-
-impl MachineManager {
-    // Returns an iterator over all machines (both ethercat and serial)
-    pub fn iter(&self) -> MachineManagerIterator<'_> {
-        MachineManagerIterator {
-            iter: MachineManagerIter::EthercatMachines {
-                iter: self.ethercat_machines.iter(),
-            },
-            serial_machines: &self.serial_machines,
-        }
-    }
-}

control-core/src/machines/mod.rs

@@ -1,23 +0,0 @@
-use new::MachineNewTrait;
-use std::any::Any;
-use std::fmt::Debug;
-
-use crate::machines::{
-    api::MachineApi, identification::MachineIdentificationUnique, new::MachineAct,
-};
-pub mod api;
-pub mod connection;
-pub mod identification;
-pub mod manager;
-pub mod manager_iter;
-pub mod new;
-pub mod registry;
-
-pub trait Machine: MachineAct + MachineNewTrait + MachineApi + Any + Debug + Send + Sync {
-    fn get_machine_identification_unique(&self) -> MachineIdentificationUnique;
-}
-
-pub trait AnyGetters: Any {
-    fn as_any(&self) -> &dyn Any;
-    fn as_any_mut(&mut self) -> &mut dyn Any;
-}

control-core/src/machines/new.rs

@@ -1,279 +0,0 @@
-use crate::{
-    machines::{identification::MachineIdentificationUnique, manager::MachineManager},
-    serial::SerialDevice,
-    socketio::namespace::Namespace,
-};
-
-use super::identification::DeviceIdentificationIdentified;
-use anyhow::Error;
-use ethercat_hal::{
-    devices::EthercatDevice, helpers::ethercrab_types::EthercrabSubDevicePreoperational,
-};
-use ethercrab::{SubDevice, SubDeviceRef};
-use smol::{
-    channel::Sender,
-    lock::{Mutex, RwLock},
-};
-use socketioxide::extract::SocketRef;
-use std::{
-    sync::{Arc, Weak},
-    time::Instant,
-};
-
-use crate::socketio::event::GenericEvent;
-
-pub trait MachineNewTrait {
-    fn new(params: &MachineNewParams<'_, '_, '_, '_, '_, '_, '_>) -> Result<Self, Error>
-    where
-        Self: Sized;
-}
-
-pub trait MachineAct {
-    fn act(&mut self, now: Instant);
-}
-
-pub struct MachineNewParams<
-    'maindevice,
-    'subdevices,
-    'device_identifications_identified,
-    'ethercat_devices,
-    'machine_new_hardware_etehrcat,
-    'machine_new_hardware_serial,
-    'machine_new_hardware,
-> where
-    'maindevice: 'machine_new_hardware,
-    'subdevices: 'machine_new_hardware,
-    'ethercat_devices: 'machine_new_hardware,
-    'machine_new_hardware_etehrcat: 'machine_new_hardware,
-{
-    pub device_group: &'device_identifications_identified Vec<DeviceIdentificationIdentified>,
-    pub hardware: &'machine_new_hardware MachineNewHardware<
-        'maindevice,
-        'subdevices,
-        'ethercat_devices,
-        'machine_new_hardware_etehrcat,
-        'machine_new_hardware_serial,
-    >,
-    pub socket_queue_tx: Sender<(SocketRef, Arc<GenericEvent>)>,
-    pub machine_manager: Weak<RwLock<MachineManager>>,
-
-    pub namespace: Arc<Mutex<Namespace>>,
-}
-
-impl MachineNewParams<'_, '_, '_, '_, '_, '_, '_> {
-    pub fn get_machine_identification_unique(&self) -> MachineIdentificationUnique {
-        self.device_group
-            .first()
-            .expect("device group must have at least one device")
-            .device_machine_identification
-            .machine_identification_unique
-            .clone()
-    }
-}
-
-pub enum MachineNewHardware<
-    'maindevice,
-    'subdevices,
-    'ethercat_devices,
-    'machine_new_hardware_etehrcat,
-    'machine_new_hardware_serial,
-> where
-    'maindevice: 'machine_new_hardware_etehrcat,
-    'subdevices: 'machine_new_hardware_etehrcat,
-    'ethercat_devices: 'machine_new_hardware_etehrcat,
-{
-    Ethercat(
-        &'machine_new_hardware_etehrcat MachineNewHardwareEthercat<
-            'maindevice,
-            'subdevices,
-            'ethercat_devices,
-        >,
-    ),
-    Serial(&'machine_new_hardware_serial MachineNewHardwareSerial),
-}
-
-pub struct MachineNewHardwareEthercat<'maindevice, 'subdevices, 'ethercat_devices> {
-    pub subdevices:
-        &'subdevices Vec<&'subdevices SubDeviceRef<'maindevice, &'subdevices SubDevice>>,
-    pub ethercat_devices: &'ethercat_devices Vec<Arc<RwLock<dyn EthercatDevice>>>,
-}
-
-pub struct MachineNewHardwareSerial {
-    pub device: Arc<RwLock<dyn SerialDevice>>,
-}
-
-// validates that all devices in the group have the same machine identification
-pub fn validate_same_machine_identification_unique(
-    identified_device_group: &Vec<DeviceIdentificationIdentified>,
-) -> Result<(), Error> {
-    let machine_identification_unique = &identified_device_group
-        .first()
-        .ok_or_else(|| {
-            anyhow::anyhow!(
-                "[{}::validate_same_machine_identification] No devices in group",
-                module_path!()
-            )
-        })?
-        .device_machine_identification
-        .machine_identification_unique;
-    for device in identified_device_group.iter() {
-        if device
-            .device_machine_identification
-            .machine_identification_unique
-            != *machine_identification_unique
-        {
-            return Err(anyhow::anyhow!(
-                "[{}::validate_same_machine_identification] Different machine identifications",
-                module_path!()
-            ));
-        }
-    }
-    Ok(())
-}
-
-/// validates that every role is unique
-pub fn validate_no_role_dublicates(
-    identified_device_group: &Vec<DeviceIdentificationIdentified>,
-) -> Result<(), Error> {
-    let mut roles = vec![];
-    for device in identified_device_group.iter() {
-        if roles.contains(&device.device_machine_identification.role) {
-            return Err(anyhow::anyhow!(
-                "[{}::validate_no_role_dublicates] Role dublicate",
-                module_path!(),
-            ));
-        }
-        roles.push(device.device_machine_identification.role);
-    }
-    Ok(())
-}
-
-// Inside control_core::machines::new module:
-pub fn get_device_identification_by_role(
-    identified_device_group: &Vec<DeviceIdentificationIdentified>,
-    role: u16,
-) -> Result<&DeviceIdentificationIdentified, Error> {
-    for device in identified_device_group.iter() {
-        if device.device_machine_identification.role == role {
-            return Ok(device);
-        }
-    }
-    Err(anyhow::anyhow!(
-        "[{}::get_device_identification_by_role] Role {} not found",
-        module_path!(),
-        role
-    ))
-}
-
-pub fn get_device_by_index<'maindevice>(
-    devices: &Vec<Arc<RwLock<dyn EthercatDevice>>>,
-    subdevice_index: usize,
-) -> Result<Arc<RwLock<dyn EthercatDevice>>, Error> {
-    Ok(devices
-        .get(subdevice_index)
-        .ok_or(anyhow::anyhow!(
-            "[{}::get_device_by_index] Index {} out of bounds for devices",
-            module_path!(),
-            subdevice_index
-        ))?
-        .clone())
-}
-
-pub fn get_subdevice_by_index<'subdevices, 'maindevice>(
-    subdevices: &'subdevices Vec<&EthercrabSubDevicePreoperational<'maindevice>>,
-    subdevice_index: usize,
-) -> Result<&'subdevices EthercrabSubDevicePreoperational<'maindevice>, Error> {
-    Ok(subdevices.get(subdevice_index).ok_or(anyhow::anyhow!(
-        "Index {} out of bounds for subdevices",
-        subdevice_index
-    ))?)
-}
-
-pub fn get_ethercat_device_by_index<'maindevice>(
-    ethercat_devices: &Vec<Arc<RwLock<dyn EthercatDevice>>>,
-    subdevice_index: usize,
-) -> Result<Arc<RwLock<dyn EthercatDevice>>, Error> {
-    Ok(ethercat_devices
-        .get(subdevice_index)
-        .ok_or(anyhow::anyhow!(
-            "[{}::get_ethercat_device_by_index] Index {} out of bounds for ethercat devices",
-            module_path!(),
-            subdevice_index
-        ))?
-        .clone())
-}
-
-#[cfg(test)]
-mod tests {
-    use crate::machines::identification::{
-        DeviceHardwareIdentification, DeviceHardwareIdentificationEthercat,
-        DeviceMachineIdentification, MachineIdentification, MachineIdentificationUnique,
-    };
-
-    pub use super::*;
-
-    #[test]
-    fn test_get_device_identification_by_role() {
-        let device_identifications = vec![
-            // role 0
-            DeviceIdentificationIdentified {
-                device_machine_identification: DeviceMachineIdentification {
-                    machine_identification_unique: MachineIdentificationUnique {
-                        machine_identification: MachineIdentification {
-                            vendor: 1,
-                            machine: 1,
-                        },
-                        serial: 1,
-                    },
-                    role: 0,
-                },
-                device_hardware_identification: DeviceHardwareIdentification::Ethercat(
-                    DeviceHardwareIdentificationEthercat { subdevice_index: 0 },
-                ),
-            },
-            // role 1
-            DeviceIdentificationIdentified {
-                device_machine_identification: DeviceMachineIdentification {
-                    machine_identification_unique: MachineIdentificationUnique {
-                        machine_identification: MachineIdentification {
-                            vendor: 2,
-                            machine: 2,
-                        },
-                        serial: 2,
-                    },
-                    role: 2,
-                },
-                device_hardware_identification: DeviceHardwareIdentification::Ethercat(
-                    DeviceHardwareIdentificationEthercat { subdevice_index: 1 },
-                ),
-            },
-            // role 2
-            DeviceIdentificationIdentified {
-                device_machine_identification: DeviceMachineIdentification {
-                    machine_identification_unique: MachineIdentificationUnique {
-                        machine_identification: MachineIdentification {
-                            vendor: 3,
-                            machine: 3,
-                        },
-                        serial: 3,
-                    },
-                    role: 1,
-                },
-                device_hardware_identification: DeviceHardwareIdentification::Ethercat(
-                    DeviceHardwareIdentificationEthercat { subdevice_index: 2 },
-                ),
-            },
-        ];
-
-        // search for role 0
-        let result = get_device_identification_by_role(&device_identifications, 0);
-        assert_eq!(result.unwrap().device_machine_identification.role, 0,);
-
-        // search for role 1
-        let result = get_device_identification_by_role(&device_identifications, 1);
-        assert_eq!(result.unwrap().device_machine_identification.role, 1,);
-        // search for role 2
-        let result = get_device_identification_by_role(&device_identifications, 2);
-        assert_eq!(result.unwrap().device_machine_identification.role, 2,);
-    }
-}

control-core/src/machines/registry.rs

@@ -1,74 +0,0 @@
-use super::{Machine, identification::MachineIdentification, new::MachineNewParams};
-use anyhow::Error;
-use smol::lock::Mutex;
-use std::{any::TypeId, collections::HashMap, sync::Arc};
-
-pub type MachineNewClosure =
-    Box<dyn Fn(&MachineNewParams) -> Result<Arc<Mutex<dyn Machine>>, Error> + Send + Sync>;
-
-pub struct MachineRegistry {
-    type_map: HashMap<TypeId, (MachineIdentification, MachineNewClosure)>,
-}
-
-impl Default for MachineRegistry {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
-impl MachineRegistry {
-    pub fn new() -> Self {
-        Self {
-            type_map: HashMap::new(),
-        }
-    }
-
-    pub fn register<T: Machine + 'static>(
-        &mut self,
-        machine_identficiation: MachineIdentification,
-    ) {
-        self.type_map.insert(
-            TypeId::of::<T>(),
-            (
-                machine_identficiation.clone(),
-                // create a machine construction closure
-                Box::new(|machine_new_params| {
-                    Ok(Arc::new(Mutex::new(T::new(machine_new_params)?)))
-                }),
-            ),
-        );
-    }
-
-    pub fn new_machine(
-        &self,
-        machine_new_params: &MachineNewParams,
-    ) -> Result<Arc<Mutex<dyn Machine>>, anyhow::Error> {
-        // get machiine identification
-        let device_identification =
-            &machine_new_params
-                .device_group
-                .first()
-                .ok_or(anyhow::anyhow!(
-                    "[{}::MachineConstructor::new_machine] No device in group",
-                    module_path!()
-                ))?;
-
-        // find machine new function by comparing MachineIdentification
-        let (_, machine_new_closure) = self
-            .type_map
-            .values()
-            .find(|(mi, _)| {
-                mi == &device_identification
-                    .device_machine_identification
-                    .machine_identification_unique
-                    .machine_identification
-            })
-            .ok_or(anyhow::anyhow!(
-                "[{}::MachineConstructor::new_machine] Machine not found",
-                module_path!()
-            ))?;
-
-        // call machine new function by reference
-        (machine_new_closure)(machine_new_params)
-    }
-}

control-core/src/rest/mod.rs

@@ -1 +0,0 @@
-pub mod mutation;

control-core/src/serial/mod.rs

@@ -1,11 +1,10 @@
-use std::{any::Any, sync::Arc};
+/*use std::{any::Any, sync::Arc};
 
 use smol::lock::RwLock;
 use std::fmt::Debug;
 
 use crate::machines::identification::DeviceIdentification;
 
-pub mod registry;
 pub mod serial_detection;
 
 pub trait SerialDevice: Any + Send + Sync + SerialDeviceNew + Debug {}
@@ -31,3 +30,4 @@ pub struct SerialDeviceIdentification {
     pub vendor_id: u16,
     pub product_id: u16,
 }
+*/

control-core/src/socketio/mod.rs

@@ -1,3 +1,2 @@
 pub mod event;
 pub mod namespace;
-pub mod namespace_id;

control-core/src/socketio/namespace.rs

@@ -4,7 +4,7 @@ use socketioxide::extract::SocketRef;
 use std::{collections::HashMap, sync::Arc, time::Duration};
 use tracing::instrument;
 
-#[derive(Debug)]
+#[derive(Debug, Clone)]
 pub struct Namespace {
     pub sockets: Vec<SocketRef>,
     pub events: HashMap<String, Vec<Arc<GenericEvent>>>,
@@ -167,7 +167,7 @@ impl Namespace {
 
 impl Drop for Namespace {
     fn drop(&mut self) {
-        self.disconnect_all();
+        //self.disconnect_all();
     }
 }
 

control-core/src/transmission/mod.rs

@@ -1,4 +1,4 @@
-use uom::si::{
+use units::{
     angle::radian,
     angular_velocity::radian_per_second,
     f64::{Angle, AngularVelocity, Length, Velocity},

control-core/src/uom_extensions/acceleration.rs

@@ -1,7 +0,0 @@
-unit! {
-    system: uom::si;
-    quantity: uom::si::acceleration;
-
-    @meter_per_minute_per_second: 0.016_666_666_666_666_67; "m/min/s", "meters per minute per second",
-        "meters per minute per second";
-}

control-core/src/uom_extensions/angular_acceleration.rs

@@ -1,7 +0,0 @@
-unit! {
-    system: uom::si;
-    quantity: uom::si::angular_acceleration;
-
-    @revolution_per_minute_per_second: 0.104_719_755_119_659_77; "rev/min/s", "revolutions per minute per second",
-        "revolutions per minute per second";
-}

control-core/src/uom_extensions/angular_jerk.rs

@@ -1,7 +0,0 @@
-unit! {
-    system: uom::si;
-    quantity: uom::si::angular_jerk;
-
-    @revolution_per_minute_per_second_squared: 0.104_719_755_119_659_77; "rev/min/s²", "revolution per minute per second squared",
-        "revolution per minute per second squared";
-}

control-core/src/uom_extensions/jerk.rs

@@ -1,7 +0,0 @@
-unit! {
-    system: uom::si;
-    quantity: uom::si::jerk;
-
-    @meter_per_minute_per_second_squared: 0.016_666_666_666_666_666_67; "m/min/s²", "meters per minute per second squared",
-        "meters per minute per second squared";
-}

control-core/src/uom_extensions/mod.rs

@@ -1,5 +0,0 @@
-pub mod acceleration;
-pub mod angular_acceleration;
-pub mod angular_jerk;
-pub mod jerk;
-pub mod velocity;

control-core/src/uom_extensions/velocity.rs

@@ -1,7 +0,0 @@
-unit! {
-    system: uom::si;
-    quantity: uom::si::velocity;
-
-    @meter_per_minute: 0.016_666_666_666_666_67; "m/min", "meters per minute",
-        "meters per minute";
-}

docs/developer-docs/Xtrem_protocol.md

@@ -0,0 +1,139 @@
+# XTREM Communication Protocol
+
+**Version:** 3.007
+**Device:** XTREM / XTREM-S Weighing Module
+**Standard:** OIML R76:2006 / EN45501:2015 compliant
+
+---
+
+## Overview
+
+The **XTREM communication protocol** allows a terminal or host controller to exchange data and commands with the XTREM weighing module.
+The device transmits and receives ASCII-coded frames over a serial interface (RS232, RS485, Wi-Fi, or Ethernet, depending on configuration).
+
+Since we are using the Ethernet interface we need to provide some kind of DHCP to assign an IP - Address to each XTREM Device.
+They then may be addressed via a **broadcast** IP (e.g.: 192.168.4.255/24).
+A **Unicast** communication is applied through the device ID inside the XTREM Frame.
+
+---
+
+## Frame Structure
+
+Each message—both query and response—has the same format:
+
+```
+STX ID_O ID_D F D_ADDRESS D_L DATA LRC ETX
+```
+
+| Field         | Description                                       | Length (bytes) |
+| :------------ | :------------------------------------------------ | :------------: |
+| **STX**       | Start of message (ASCII `02h`)                    |        1       |
+| **ID_O**      | Sender address (2 ASCII hex chars)                |        2       |
+| **ID_D**      | Destination address (2 ASCII hex chars)           |        2       |
+| **F**         | Function code (`R`, `W`, `E`, etc.)               |        1       |
+| **D_ADDRESS** | Data address (register, 4 ASCII hex chars)        |        4       |
+| **D_L**       | Data length (2 ASCII hex chars)                   |        2       |
+| **DATA**      | Optional data field                               |    Variable    |
+| **LRC**       | Longitudinal Redundancy Check (2 ASCII hex chars) |        2       |
+| **ETX**       | End of message (ASCII `03h`)                      |        1       |
+
+In the default configuration the Frame also requires a CRLF at the end.
+
+**Example:**
+
+```
+STX ‘1’ ‘7’ ‘0’ ‘1’ ‘R’ ‘0’ ‘1’ ‘0’ ‘1’ ‘0’ ‘0’ LRC ETX CR LF
+```
+
+---
+
+## Function Codes
+
+| Function | ASCII | Hex | Description     |
+| :------- | :---- | :---| :-------------- |
+| **R**    | R     | 52h | Read request    |
+| **r**    | r     | 72h | Read response   |
+| **W**    | W     | 57h | Write request   |
+| **w**    | w     | 77h | Write response  |
+| **E**    | E     | 45h | Execute command |
+| **e**    | e     | 65h | Execute response|
+
+### Write response codes
+
+* `'0'` – OK
+* `'1'` – Write denied (sealed)
+* `'2'` – Read-only register
+* `'3'` – Invalid value / out of range
+
+### Execute response codes
+
+* `'0'` – Executed successfully
+* `'1'` – Blocked by seal switch
+
+---
+
+## LRC Calculation
+
+The **Longitudinal Redundancy Check** is a one-byte XOR of all message bytes, excluding:
+
+* `STX`
+* `ETX`
+* The LRC itself
+
+Example C function:
+
+```c
+unsigned char LRC(unsigned char* s) {
+    unsigned char lrc = 0;
+    while (*s) {
+        lrc ^= *(s++);
+    }
+    return lrc;
+}
+```
+
+Example Rust function:
+```rust
+pub fn compute_lrc(data: &[u8]) -> u8 {
+    data.iter().fold(0u8, |acc, &b| acc ^ b)
+}
+
+```
+
+---
+
+## Key Data Registers
+
+| Address (hex) | Description                | Type | Notes                                 |
+| :------------ | :------------------------- | :--: | :------------------------------------ |
+| **0000h**     | Serial number              |   R  | Factory-set                           |
+| **0001h**     | Device ID                  |  RW  | Network address                       |
+| **0007h**     | Hardware version           |   R  | Read-only                             |
+| **0008h**     | Software version           |   R  | Read-only                             |
+| **0009h**     | Sealing switch status      |   R  | `0=UNLOCK`, `1=LOCK`                  |
+| **0010h**     | Baud rate                  |  RW  | `0–4` → 9600–115200 baud              |
+| **0013h**     | Stream mode output rate    |  RW  | Time in ms                            |
+| **0100h**     | Device state               |   R  | Status bits (power, Wi-Fi, ADC, etc.) |
+| **0101h**     | Weight value               |   R  | Gross weight                          |
+| **0102h**     | Tare value                 |  RE  | Read/Execute                          |
+| **0103h**     | Net weight                 |   R  | Gross − Tare                          |
+| **0110h**     | ADC counts (instant)       |   R  | Raw ADC data                          |
+| **0111h**     | ADC counts (filtered)      |   R  | Post-filter data                      |
+| **1010h**     | Stop stream mode           |   E  | Execute                               |
+| **1011h**     | Start stream mode (weight) |   E  | Continuous output                     |
+| **9999h**     | Device reset               |   E  | Software reset                        |
+| **EEEEh**     | Factory reset              |   E  | Restores defaults                     |
+
+---
+
+## Post-Factory Reset Configuration
+
+After performing a factory reset, several registers must be configured to ensure proper operation of the device.
+
+Note: The unit may remain set to 'g' after a factory reset, but the values received may be in 'kg' depending on the device configuration.
+
+The following registers should be reviewed and set as required:
+1. **Address: 0022 | Max (Max1) (scale maximum capacity)**
+    The default value for this register may vary between devices (e.g., 60000 or 6000). Set this value to 6000 to ensure correct operation.
+2. **Address: 0023 | e (e1) (scale interval)**
+3. **Address: 0026 | Decimal position**

docs/developer-docs/getting-started.md

@@ -82,3 +82,12 @@ git push
 # Recommended Editor Setup
 
 We recommend you to use an Editor with rust-analyzer support like VSCode to speed up development and detect errors before compiling.
+
+# Minimal Hardware Examples
+
+To get started with actual hardware, check out these step-by-step tutorials:
+
+- **[LED Control with EL2004](./minimal-example-el2004.md)** - Digital output control, the simplest possible hardware setup
+- **[Analog Input with EL3021](./minimal-example-el3021.md)** - Reading analog current measurements
+
+These examples provide complete hardware wiring diagrams and software setup instructions.

docs/developer-docs/minimal-example-el2004.md

@@ -0,0 +1,224 @@
+# Minimal Example — LED Control on the EL2004  
+A complete hardware + software walkthrough
+
+---
+
+## Table of Contents
+1. [Introduction](#1-introduction)  
+2. [Requirements](#2-requirements)  
+3. [Hardware Setup](#3-hardware-setup)  
+4. [Software Setup](#4-software-setup)  
+5. [Demo](#5-demo)  
+6. [References](#6-references)  
+7. [Acknowledgements](#7-acknowledgements)
+
+---
+
+## 1. Introduction
+
+The EL2004 LED Toggle Example is a minimal demonstration showing how to control digital outputs on a **Beckhoff EL2004 EtherCAT terminal** using the QiTech machine framework.  
+It represents the simplest possible hardware interaction in the system:  
+**toggling LED outputs using the QiTech Control Dashboard.**
+
+---
+
+## 2. Requirements
+
+### Hardware
+- Beckhoff **EL2004 EtherCAT Terminal** (4-channel digital output)  
+- Beckhoff **EK1100 EtherCAT Coupler**  
+- **24 V DC power supply** (AC/DC adapter + DC hollow plug)  
+- Jumper / bridge wires (0.5–1.5 mm² recommended)  
+- A **Linux PC** (Ubuntu/Debian recommended)  
+- Standard Ethernet cable  
+- Flat screwdriver  
+
+### Software  
+*(Installation steps in Section 4)*  
+- Rust toolchain  
+- Node.js + npm  
+- Git  
+- QiTech Control repository  
+- EtherCAT HAL (included inside repo)
+
+---
+
+## 3. Hardware Setup
+
+### 3.1 Schematic
+
+![](../assets/schematic.png)
+
+---
+
+### 3.2 EK1100 Wiring
+
+This wiring configuration powers the EL2004 and prepares it for LED control.  
+It is not the only possible wiring but is the **simplest functional setup**.
+
+#### ⚠️ Safety Warning  
+Always disconnect power before wiring.  
+Working on live EtherCAT terminals can cause serious damage or electrical shock.
+
+---
+
+#### 3.2.1 Safe Wiring Procedure (Beckhoff Recommended)
+
+1. Insert a screwdriver **straight** into the square release hole.  
+2. Insert the stripped wire into the round opening.  
+3. Remove the screwdriver — the spring clamp locks the wire.
+
+![](../assets/wiring.png)
+
+---
+
+#### 3.2.2 Wiring Steps (Used in This Example)
+
+We supply power using a **DC hollow-plug adapter**, like this one:  
+https://www.amazon.de/dp/B093FTFZ8Q
+
+Perform the following wiring on the EK1100:
+
+1. Red wire **(+24 V)** → Terminal **2**  
+2. Black wire **(0 V)** → Terminal **3**  
+3. Jumper wire from **Terminal 1 → Terminal 6**  
+4. Jumper wire from **Terminal 5 → Terminal 7**  
+
+After wiring, your module should look like **Figure 1**.
+
+---
+
+#### **Figure 1 — EK1100 Minimal Wiring**
+<img src="../assets/ek1100.jpeg" width="400">
+
+
+---
+
+### 3.3 EL2004 Integration
+
+Slide the EL2004 onto the **right side of the EK1100** until it locks.  
+The EtherCAT E-Bus and power contacts connect automatically — **no wiring required**.
+
+#### **Figure 2 — EL2004 Terminal**
+<img src="../assets/el2004.jpeg" width="400">
+
+---
+
+### 3.4 Final Assembled Setup
+
+#### **Figure 3 — EK1100 + EL2004 Connected**
+<img src="../assets/complete.jpeg" width="400">
+
+---
+
+### 3.5 Power & Ethernet
+
+#### Power  
+Connect the 24 V adapter to the hollow plug used earlier.
+**Example AC/DC Adapter (Figure 4):**
+
+<img src="../assets/adapter.jpeg" width="400">
+
+
+#### Ethernet  
+Use a standard LAN cable to connect your PC → EK1100.
+The final powered up and connected setup should look like this:
+
+<img src="../assets/power.jpeg" width="400">
+
+---
+
+## 4. Software Setup
+
+### 4.1 Installing on Ubuntu/Debian
+
+Paste this into your terminal:
+
+```bash
+# Press Enter when prompted
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+
+sudo apt update
+sudo apt install -y npm nodejs git
+
+git clone git@github.com:qitechgmbh/control.git
+cd control/electron
+npm install
+```
+### 4.2 Running the Backend
+```bash
+./cargo_run_linux.sh
+```
+This script:
+
+- Builds the backend
+
+- Grants required system capabilities (raw sockets)
+
+- Starts EtherCAT communication
+
+Ensure the EK1100 is connected.
+
+### 4.3 Running the Frontend
+```bash
+cd electron
+npm run start
+```
+This launches the QiTech Control dashboard.
+
+## 5. Demo
+
+### 5.1 Assigning Devices in the Dashboard
+
+Once the backend + frontend are running, you should see:
+
+- EK1100 Coupler
+
+- EL2004 Digital Output Terminal
+![](../assets/discovery.png)
+
+Steps:
+
+- Click Assign on the EK1100
+
+- Select TestMachine V1
+ 
+![](../assets/setmachine.png)
+
+
+- Enter a serial number (use the same for EK1100 + EL2004)
+
+![](../assets/serserial.png)
+
+- Click Write
+
+- Repeat for the EL2004
+
+### 5.2 Testing LED Control
+Navigate to:
+
+Machines → TestMachine
+![](../assets/machinedetected.png)
+You will see this interface:
+
+![](../assets/machinecontrol.png)
+
+**You can now toggle the four digital outputs of the EL2004.**
+
+## 6. References
+
+This guide incorporates information from official Beckhoff documentation.
+All diagrams, product names, and figures belong to Beckhoff Automation GmbH & Co. KG and are used here solely for educational purposes.
+
+Referenced Manuals
+
+[Beckhoff EK1100 Documentation](https://download.beckhoff.com/download/Document/io/ethercat-terminals/ek110x_ek15xx_en.pdf)
+
+[Beckhoff EL2004 Documentation](https://download.beckhoff.com/download/Document/io/ethercat-terminals/el20xx_el2124_de.pdf)
+
+## 7. Acknowledgements
+
+This tutorial is inspired by the clarity and educational quality of Beckhoff manuals.
+All wiring illustrations and hardware descriptions in this guide are provided for demonstration purposes only and do not replace official Beckhoff installation guidelines.
+
+Special thanks to the QiTech engineering team for providing the backend architecture, EtherCAT HAL abstraction, and the TestMachine framework that makes this example possible.

docs/developer-docs/minimal-example-el3021.md

@@ -0,0 +1,178 @@
+# Minimal Example — Analog Input EL3021
+
+## Table of Contents
+1. [Introduction](#1-introduction)
+2. [Requirements](#2-requirements)
+3. [Hardware Setup](#3-hardware-setup)
+4. [Software Setup](#4-software-setup)
+5. [Demo](#5-demo)
+6. [References](#6-references)
+
+## 1. Introduction
+The EL3021 Analog Input example demonstrates how to measure analog current on a **Beckhoff EL3021 EtherCAT terminal** using the QiTech machine framework.
+
+## 2. Requirements
+
+### Hardware
+- Beckhoff **EL3021 EtherCAT Terminal** (1-channel analog input)  
+- Beckhoff **EK1100 EtherCAT Coupler**
+- **24 V DC power supply** (AC/DC adapter + DC hollow plug)
+- **Adjustable DC power supply** (or any other means of producing 4-20mA DC @ <10V )
+- Jumper / bridge wires (0.5–1.5 mm² recommended)  
+- A **Linux PC** (Ubuntu/Debian recommended)  
+- Standard Ethernet cable  
+- Flat screwdriver  
+
+## 3. Hardware Setup
+
+### 3.1 Schematic
+![](../assets/EL3021_schematic.png)
+The 24V supply powers the EL2004, while the adjustable power supply generates the analog input signal for the EL3021.
+
+#### ⚠️ Safety Warning  
+Always disconnect power before wiring.  
+Working on live EtherCAT terminals can cause serious damage or electrical shock.
+
+### 3.2.1 Safe Wiring Procedure (Beckhoff Recommended)
+
+1. Insert a screwdriver **straight** into the square release hole.  
+2. Insert the stripped wire into the round opening.  
+3. Remove the screwdriver — the spring clamp locks the wire.
+
+![](../assets/wiring.png)
+
+---
+
+### 3.2.2 Wiring Steps (Used in This Example)
+
+We supply power using a **DC hollow-plug adapter**, like this one:  
+https://www.amazon.de/dp/B093FTFZ8Q
+
+Perform the following wiring on the EK1100:
+
+1. Red wire **(+24 V)** → Terminal **2**  
+2. Black wire **(0 V)** → Terminal **3**  
+3. Jumper wire from **Terminal 1 → Terminal 6**  
+4. Jumper wire from **Terminal 5 → Terminal 7**  
+
+After wiring, your module should look like **Figure 1**.
+
+---
+
+#### **Figure 1 — EK1100 Minimal Wiring**
+<img src="../assets/ek1100.jpeg" width="400">
+
+
+---
+
+### 3.3 EL3021 Integration
+
+Slide the EL3021 onto the **right side of the EK1100** until it locks.  
+The EtherCAT E-Bus and power contacts connect automatically.
+Then you need to wire the adjustable power supply to the EL3021.
+
+#### **Figure 2 — EL3021 Terminal**
+<img src="../assets/EL3021.jpg" width="400">
+
+1. Wire ⊕ to **Terminal 1**
+2. Wire ⊖ to **Terminal 2**
+---
+
+### 3.4 Final Assembled Setup
+
+#### **Figure 3 — EK1100 + EL3021 Connected**
+<img src="../assets/EK1100+EL3021.jpg" width="400">
+
+---
+
+## 3.5 Power & Ethernet
+
+### 3.5.1 Power  
+Connect the 24 V adapter to the hollow plug used earlier.
+
+#### Example AC/DC Adapter (Figure 4):
+
+<img src="../assets/adapter.jpeg" width="400">
+
+
+### 3.5.2 Ethernet  
+Use a standard LAN cable to connect your PC → EK1100.
+The final powered up and connected setup should look like this:
+
+<img src="../assets/EL3021_power+eth.jpg" width="400">
+
+---
+
+## 4. Software Setup
+
+### 4.1 Installing on Ubuntu/Debian
+
+Paste this into your terminal:
+
+```bash
+# Press Enter when prompted
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+
+sudo apt update
+sudo apt install -y npm nodejs git
+
+git clone git@github.com:qitechgmbh/control.git
+cd control/electron
+npm install
+```
+### 4.2 Running the Backend
+```bash
+./cargo_run_linux.sh
+```
+This script:
+
+- Builds the backend
+
+- Grants required system capabilities (raw sockets)
+
+- Starts EtherCAT communication
+
+Ensure the EK1100 is connected.
+
+### 4.3 Running the Frontend
+```bash
+cd electron
+npm run start
+```
+This launches the QiTech Control dashboard.
+
+## 5. Demo
+
+### 5.1 Assigning Devices in the Dashboard
+Once both backend and frontend are running, the Setup -> EtherCat page should look something like this:
+![](../assets/EL3021_overview.png)
+Listing the EK1100 and the EL3021.
+
+To assign the two devices to a machine, click "Assign" on both devices. This should open the following pop-up modal:
+
+**EK1100**
+![](../assets/EL3021_assign.png)
+1. Select "AnalogTest V1" under "Machine"
+2. Choose a serial number to uniquely identify the machine (1 in this example)
+3. Under "Device Role" select "0 - Bus Coupler"
+
+**EL3021**
+![](../assets/EL3021_assign2.png)
+1. Select "AnalogTest V1" under "Machine"
+2. Use the same serial number you chose for the EK1100
+3. Under "Device Role" select "1 - EL3021"
+---
+The machine is now configured.
+A new Tab "AnalogTest" should appear in the right sidebar. Clicking that tab should show the machine control interface:
+![](../assets/EL3021_control.png)
+Results should show the current measured by the analog input - the current set on the adjustable power supply.
+
+
+## 6. References
+This guide incorporates information from official Beckhoff documentation.
+All diagrams, product names, and figures belong to Beckhoff Automation GmbH & Co. KG and are used here solely for educational purposes.
+
+Referenced Manuals
+
+[Beckhoff EK1100 Documentation](https://download.beckhoff.com/download/Document/io/ethercat-terminals/ek110x_ek15xx_en.pdf)
+[Beckhoff EL3021 Documentation](https://download.beckhoff.com/download/Document/io/ethercat-terminals/el30xx_de.pdf)

docs/nixos/README.md

@@ -10,7 +10,7 @@ This is why we chose nixos
 # How we do updates
 1. The user selects a version (commit/branch/tag) of the software they want to install
 2. The repo is cloned to the local machine
-3. the `installInfo.nix` is created and commited locally. It contains infos like the commit hash, branch, tag, timestamp etc. These are later available as environment variables `QITECH_OS...`
+3. Information like the commit hash, branch, tag, timestamp etc. is passed to the nix build process as environment variables `QITECH_OS...`
 4. The `nixos-switch` command is run. After rebuilding & compiling the software the system reboots.
    - The nixos-switch command does the following:
    1. The system is built with the new configuration
@@ -21,4 +21,4 @@ This is why we chose nixos
 
 # More Docs
 - [Implementation Details](./details.md)
-- [Fresh Installation Quick Start guide](./quick-start.md)
+- [Fresh Installation Quick Start guide](./quick-start.md)

electron/.gitignore

@@ -73,7 +73,7 @@ typings/
 # vuepress build output
 .vuepress/dist
 
-# Serverless directories
+# Serverless directoriesProcessMetrics
 .serverless/
 
 # FuseBox cache
@@ -88,6 +88,7 @@ typings/
 # Vite
 .vite/
 dist/
+dist-electron/
 
 # Electron-Forge
 out/

electron/forge.config.ts

@@ -1,59 +0,0 @@
-import type { ForgeConfig } from "@electron-forge/shared-types";
-import { MakerSquirrel } from "@electron-forge/maker-squirrel";
-import { MakerZIP } from "@electron-forge/maker-zip";
-import { MakerDeb } from "@electron-forge/maker-deb";
-import { MakerRpm } from "@electron-forge/maker-rpm";
-import { VitePlugin } from "@electron-forge/plugin-vite";
-import { FusesPlugin } from "@electron-forge/plugin-fuses";
-import { FuseV1Options, FuseVersion } from "@electron/fuses";
-
-const config: ForgeConfig = {
-  packagerConfig: {
-    executableName: "electron-shadcn",
-    asar: true,
-    icon: "src/assets/icon",
-  },
-  rebuildConfig: {},
-  makers: [
-    new MakerSquirrel({}),
-    new MakerZIP({}, ["darwin"]),
-    new MakerRpm({}),
-    new MakerDeb({}),
-  ],
-  plugins: [
-    new VitePlugin({
-      // `build` can specify multiple entry builds, which can be Main process, Preload scripts, Worker process, etc.
-      // If you are familiar with Vite configuration, it will look really familiar.
-      build: [
-        {
-          // `entry` is just an alias for `build.lib.entry` in the corresponding file of `config`.
-          entry: "src/main.ts",
-          config: "vite.main.config.ts",
-        },
-        {
-          entry: "src/preload.ts",
-          config: "vite.preload.config.ts",
-        },
-      ],
-      renderer: [
-        {
-          name: "main_window",
-          config: "vite.renderer.config.ts",
-        },
-      ],
-    }),
-    // Fuses are used to enable/disable various Electron functionality
-    // at package time, before code signing the application
-    new FusesPlugin({
-      version: FuseVersion.V1,
-      [FuseV1Options.RunAsNode]: false,
-      [FuseV1Options.EnableCookieEncryption]: true,
-      [FuseV1Options.EnableNodeOptionsEnvironmentVariable]: false,
-      [FuseV1Options.EnableNodeCliInspectArguments]: false,
-      [FuseV1Options.EnableEmbeddedAsarIntegrityValidation]: true,
-      [FuseV1Options.OnlyLoadAppFromAsar]: true,
-    }),
-  ],
-};
-
-export default config;

electron/forge.env.d.ts

@@ -1,35 +0,0 @@
-export {}; // Make this a module
-
-declare global {
-  // This allows TypeScript to pick up the magic constants that's auto-generated by Forge's Vite
-  // plugin that tells the Electron app where to look for the Vite-bundled app code (depending on
-  // whether you're running in development or production).
-  const MAIN_WINDOW_VITE_DEV_SERVER_URL: string;
-  const MAIN_WINDOW_VITE_NAME: string;
-
-  namespace NodeJS {
-    interface Process {
-      // Used for hot reload after preload scripts.
-      viteDevServers: Record<string, import("vite").ViteDevServer>;
-    }
-  }
-
-  type VitePluginConfig = ConstructorParameters<
-    typeof import("@electron-forge/plugin-vite").VitePlugin
-  >[0];
-
-  interface VitePluginRuntimeKeys {
-    VITE_DEV_SERVER_URL: `${string}_VITE_DEV_SERVER_URL`;
-    VITE_NAME: `${string}_VITE_NAME`;
-  }
-}
-
-declare module "vite" {
-  interface ConfigEnv<
-    K extends keyof VitePluginConfig = keyof VitePluginConfig,
-  > {
-    root: string;
-    forgeConfig: VitePluginConfig;
-    forgeConfigSelf: VitePluginConfig[K][number];
-  }
-}

electron/package.json

@@ -6,10 +6,8 @@
   "main": ".vite/build/main.js",
   "private": true,
   "scripts": {
-    "start": "electron-forge start",
-    "package": "electron-forge package",
-    "make": "electron-forge make",
-    "publish": "electron-forge publish",
+    "start": "vite",
+    "build": "vite build",
     "lint": "eslint .",
     "lint:write": "eslint . --fix",
     "format": "prettier --check .",
@@ -22,15 +20,6 @@
   },
   "author": "",
   "devDependencies": {
-    "@electron-forge/cli": "^7.6.1",
-    "@electron-forge/maker-deb": "^7.8.0",
-    "@electron-forge/maker-rpm": "^7.8.3",
-    "@electron-forge/maker-squirrel": "^7.6.1",
-    "@electron-forge/maker-zip": "^7.6.1",
-    "@electron-forge/plugin-auto-unpack-natives": "^7.6.1",
-    "@electron-forge/plugin-fuses": "^7.10.2",
-    "@electron-forge/plugin-vite": "^7.6.1",
-    "@electron-forge/shared-types": "^7.4.0",
     "@electron/fuses": "^1.8.0",
     "@eslint/compat": "^1.2.6",
     "@eslint/js": "^9.18.0",
@@ -55,13 +44,15 @@
     "globals": "^16.2.0",
     "jsdom": "^26.0.0",
     "postcss": "^8.5.2",
-    "prettier": "^3.6.2",
+    "prettier": "^3.7.3",
     "prettier-plugin-tailwindcss": "^0.6.14",
     "tailwindcss": "^4.1.4",
     "ts-node": "^10.9.2",
     "typescript": "^5.7.3",
     "typescript-eslint": "^8.24.1",
     "vite": "^6.4.1",
+    "vite-plugin-electron": "^0.29.0",
+    "vite-plugin-electron-renderer": "^0.14.6",
     "vitest": "^3.0.6"
   },
   "dependencies": {

electron/src/App.tsx

@@ -9,6 +9,7 @@ import { RouterProvider } from "@tanstack/react-router";
 import { Toaster } from "./components/ui/sonner";
 import { enableMapSet } from "immer";
 import { useGlobalLogStreaming } from "./hooks/useGlobalLogStreaming";
+import { GlobalLaserToastManager } from "./setup/GlobalLaserToastManager";
 
 export default function App() {
   const { i18n } = useTranslation();
@@ -21,7 +22,12 @@ export default function App() {
     updateAppLanguage(i18n);
   }, [i18n]);
 
-  return <RouterProvider router={router} />;
+  return (
+    <>
+      <GlobalLaserToastManager />
+      <RouterProvider router={router} />
+    </>
+  );
 }
 
 // enable immer MapSet plugin

electron/src/assets/markdown/extruder/manual.md

@@ -720,3 +720,7 @@ The following persons must not work on the machine:
 ![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 8](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_8-008.png)
 
 ![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 9](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_9-009.png)
+
+## Mechanical Diagrams
+
+![QiTech Pro Extruder Nozzle 2025](images/manuals/extruder/Nozzle.png)

electron/src/client/mainNamespace.ts

@@ -145,8 +145,17 @@ export function mainMessageHandler(
   };
 }
 
+// Create the store instance once and export it
+export const mainNamespaceStore: StoreApi<MainNamespaceStore> =
+  createMainNamespaceStore();
+
+// Message handler stays the same
+export const mainMessageHandlerInstance: EventHandler =
+  mainMessageHandler(mainNamespaceStore);
+
+// Hook that uses the exported store
 const mainRoomImplementation = createNamespaceHookImplementation({
-  createStore: createMainNamespaceStore,
+  createStore: () => mainNamespaceStore, // use the exported store
   createEventHandler: mainMessageHandler,
 });
 

electron/src/client/socketioStore.ts

@@ -8,6 +8,7 @@ import { z } from "zod";
 import { toastError, toastZodError } from "@/components/Toast";
 import { MachineIdentificationUnique } from "@/machines/types";
 import { FPS_30 } from "@/lib/constants";
+import { mainNamespaceStore } from "./mainNamespace";
 
 /**
  * Simple buffer-based store updater to limit React re-renders to ~30 FPS
@@ -305,27 +306,13 @@ const useSocketioStore = create<SocketioStore>()((set, get) => ({
     // add handlers
     socket.on("connect", () => {
       console.log(`Connected to ${namespace_path}`);
-
-      // reset the store
       resetStore(set);
     });
     socket.on("disconnect", (reason) => {
       socket.disconnect();
-      console.warn(`Disconnected from ${namespace_path}, reason: ${reason}`);
-
-      // reset the store
       resetStore(set);
-
-      // Attempt to reconnect after a short delay for any disconnect reason
-      console.log(
-        `Disconnected from ${namespace_path}, attempting reconnect in 1s...`,
-      );
-      setTimeout(() => {
-        if (get().hasNamespace(namespaceId) && !socket.connected) {
-          console.log(`Reconnecting to ${namespace_path}...`);
-          socket.connect();
-        }
-      }, 1000);
+      // Its hacky but i do not care, electron + react is annoying ...
+      window.location.reload();
     });
 
     socket.on("event", (event: unknown) => {
@@ -334,11 +321,9 @@ const useSocketioStore = create<SocketioStore>()((set, get) => ({
       if (!event_parsed.success) {
         toastZodError(event_parsed.error, "Invalid event");
         return;
-      }
-      // handle the event
+      } // handle the event
       get().namespaces[namespace_path].handler(event_parsed.data);
     });
-
     // store the namespace initally
     set(
       produce((state: SocketioStore) => {
@@ -356,8 +341,25 @@ const useSocketioStore = create<SocketioStore>()((set, get) => ({
       }),
     );
 
-    // finally connect
-    socket.connect();
+    if (namespace_path !== "/main") {
+      const intervalId = setInterval(() => {
+        const mainState = mainNamespaceStore.getState();
+        const machineExists =
+          namespaceId.type === "machine" &&
+          mainState.machines?.data?.machines.some(
+            (m) =>
+              m.machine_identification_unique.serial ===
+              namespaceId.machine_identification_unique.serial,
+          );
+        //console.log(machineExists);
+        if (machineExists && !socket.connected) {
+          socket.connect();
+          clearInterval(intervalId); // stop polling
+        }
+      }, 500);
+    } else {
+      socket.connect();
+    }
   },
   incrementNamespace: (namespaceId: NamespaceId) => {
     const namespace_path = serializeNamespaceId(namespaceId);
@@ -382,11 +384,11 @@ const useSocketioStore = create<SocketioStore>()((set, get) => ({
   },
 
   decrementNamespace: (namespaceId: NamespaceId) => {
-    const namespace_path = serializeNamespaceId(namespaceId);
+    /*const namespace_path = serializeNamespaceId(namespaceId);
 
     // check if the namespace exists
     const namespace = get().namespaces[namespace_path];
-    /*if (namespace) {
+    if (namespace) {
       set(
         produce((state: SocketioStore) => {
           // decrement the count

electron/src/client/softReload.ts

@@ -0,0 +1,17 @@
+import { mainNamespaceStore, mainMessageHandler } from "./mainNamespace";
+
+// Soft reset function
+export function softReloadMainNamespaceStore() {
+  // 1️⃣ Reset the store to initial state
+  mainNamespaceStore.setState({
+    ethercatDevices: null,
+    machines: null,
+    ethercatInterfaceDiscovery: null,
+  });
+
+  // 2️⃣ Re-attach the message handler if needed
+  // This ensures future socket events still update the store
+  mainMessageHandler(mainNamespaceStore);
+
+  console.log("MainNamespaceStore soft reloaded");
+}

electron/src/components/SidebarLayout.tsx

@@ -1,10 +1,16 @@
 import { OutsideCorner } from "@/components/OutsideCorner";
 import { useMachines } from "@/client/useMachines";
 import { useOnSubpath } from "@/lib/useOnSubpath";
-import { Link, Outlet } from "@tanstack/react-router";
-import { Fragment } from "react";
+import {
+  Link,
+  Outlet,
+  useRouter,
+  useRouterState,
+} from "@tanstack/react-router";
+import { Fragment, useEffect } from "react";
 import React from "react";
 import { Icon, IconName } from "./Icon";
+import { useMainNamespace } from "@/client/mainNamespace";
 
 type SidebarItemContent = {
   link: string;
@@ -57,7 +63,51 @@ export function useSidebarlessWidth() {
 
 export function SidebarLayout() {
   const machines = useMachines();
+  const router = useRouter();
+  const routerState = useRouterState();
+  const { machines: machinesEvent } = useMainNamespace();
   const [contentWidth, setContentWidth] = React.useState<number>(0);
+
+  // Machine connection guard: redirect to setup if selected machine disconnects
+  useEffect(() => {
+    // Wait for machines data to be loaded
+    if (!machinesEvent?.data) return;
+
+    // Extract serial from current path (e.g., /machines/laser1/12345/control)
+    const pathMatch = routerState.location.pathname.match(
+      /\/machines\/[^/]+\/(\d+)/,
+    );
+    if (!pathMatch) return; // Not on a machine page
+
+    // Safety check: ensure pathMatch has at least 2 elements (full match + capture group)
+    if (pathMatch.length < 2) {
+      console.warn("[ConnectionGuard] Invalid pathMatch structure:", pathMatch);
+      return;
+    }
+
+    // Parse serial number with error handling
+    const serialString = pathMatch[1];
+    const serialNumber = parseInt(serialString, 10);
+
+    // Check if parseInt succeeded (NaN means parsing failed)
+    if (isNaN(serialNumber)) {
+      console.warn(
+        `[ConnectionGuard] Failed to parse serial number from "${serialString}"`,
+        { pathname: routerState.location.pathname },
+      );
+      return;
+    }
+
+    // Check if machine still exists in the raw machines data
+    const machineExists = machinesEvent.data.machines.some(
+      (m) => m.machine_identification_unique.serial === serialNumber,
+    );
+
+    if (!machineExists) {
+      router.navigate({ to: "/_sidebar/setup/machines" });
+    }
+  }, [machines, machinesEvent, routerState.location.pathname, router]);
+
   const items: SidebarItemContent[] = [
     ...machines.map((machine) => ({
       link: `/_sidebar/machines/${machine.slug}/${machine.machine_identification_unique.serial}/control`,

electron/src/components/graph/types.ts

@@ -63,7 +63,11 @@ export type DataSeries = SeriesData | SeriesData[];
 export type BigGraphProps = {
   newData: DataSeries;
   unit?: Unit;
-  renderValue?: (value: number) => string;
+  renderValue?: (
+    value: number,
+    seriesIndex?: number,
+    seriesTitle?: string,
+  ) => string;
   config: GraphConfig;
   graphId: string;
   syncGraph?: PropGraphSync;

electron/src/control/MinMaxValue.tsx

@@ -0,0 +1,173 @@
+import { Icon, IconName } from "@/components/Icon";
+import React, { useState, useMemo } from "react";
+import {
+  getUnitIcon,
+  renderValueToReactNode,
+  renderUnitSymbol,
+  Unit,
+} from "./units";
+import { Label } from "./Label";
+import { TimeSeries, TimeSeriesValue } from "@/lib/timeseries";
+
+type TimeframeOption = {
+  label: string;
+  value: number; // in milliseconds
+};
+
+export const TIMEFRAME_OPTIONS: TimeframeOption[] = [
+  { label: "1 min", value: 1 * 60 * 1000 },
+  { label: "5 min", value: 5 * 60 * 1000 },
+  { label: "10 min", value: 10 * 60 * 1000 },
+  { label: "30 min", value: 30 * 60 * 1000 },
+  { label: "1 hour", value: 60 * 60 * 1000 },
+];
+
+type Props = {
+  label: string;
+  unit?: Unit;
+  timeseries: TimeSeries;
+  icon?: IconName;
+  renderValue?: (value: number) => string;
+  defaultTimeframe?: number; // in milliseconds, defaults to 5 minutes
+  /** Optional externally-controlled timeframe (ms). When provided, component becomes controlled. */
+  timeframe?: number;
+  /** Optional callback when timeframe is changed via this component's selector */
+  onTimeframeChange?: (t: number) => void;
+  /** When true, hide the built-in timeframe selector (useful when sharing a selector outside) */
+  hideSelector?: boolean;
+};
+
+export function MinMaxValue({
+  unit,
+  timeseries,
+  icon,
+  label,
+  renderValue,
+  defaultTimeframe = 5 * 60 * 1000, // 5 minutes default
+  timeframe,
+  onTimeframeChange,
+  hideSelector = false,
+}: Props) {
+  const [internalTimeframe, setInternalTimeframe] = useState(defaultTimeframe);
+  const selectedTimeframe = timeframe ?? internalTimeframe;
+
+  // Calculate min/max from the timeseries using the selected timeframe
+  const { min, max, hasData } = useMemo(() => {
+    // Use short series for timeframes <= 5 seconds, otherwise use long series
+    // Short series typically has ~5 second retention with high resolution
+    // Long series typically has ~1 hour retention with lower resolution
+    const series =
+      selectedTimeframe <= 5000 ? timeseries.short : timeseries.long;
+
+    // Manually calculate min/max to exclude zero values (which might be invalid readings)
+    const cutoffTime = series.lastTimestamp - selectedTimeframe;
+    let min = Number.POSITIVE_INFINITY;
+    let max = Number.NEGATIVE_INFINITY;
+    let hasValidData = false;
+    let dataCount = 0;
+
+    const { values: raw, index, size, validCount } = series;
+
+    const startIdx = validCount < size ? 0 : index;
+
+    for (let i = 0; i < validCount; i++) {
+      const idx = (startIdx + i) % size;
+      const val = raw[idx];
+
+      if (
+        val &&
+        val.timestamp > 0 &&
+        val.timestamp >= cutoffTime &&
+        val.value > 0
+      ) {
+        hasValidData = true;
+        dataCount++;
+        if (val.value < min) min = val.value;
+        if (val.value > max) max = val.value;
+      }
+    }
+
+    if (!hasValidData) {
+      return { min: 0, max: 0, hasData: false };
+    }
+
+    return { min, max, hasData: true };
+  }, [
+    timeseries.short,
+    timeseries.long,
+    timeseries.current,
+    selectedTimeframe,
+  ]);
+
+  return (
+    <div className="flex w-full flex-col gap-3">
+      <Label label={label}>
+        <div className="flex flex-row items-center gap-6">
+          {/* Min Value */}
+          <div className="flex flex-row items-center gap-2">
+            <Icon
+              name={icon ?? (unit ? getUnitIcon(unit) : undefined)}
+              className="size-5 text-blue-500"
+            />
+            <div className="flex flex-col">
+              <span className="text-xs text-gray-500">Min</span>
+              <div className="flex flex-row items-center gap-1">
+                <span className="font-mono text-xl font-bold">
+                  {hasData
+                    ? renderValueToReactNode(min, unit, renderValue)
+                    : "-"}
+                </span>
+                {hasData && (
+                  <span className="text-sm">{renderUnitSymbol(unit)}</span>
+                )}
+              </div>
+            </div>
+          </div>
+
+          {/* Max Value */}
+          <div className="flex flex-row items-center gap-2">
+            <Icon
+              name={icon ?? (unit ? getUnitIcon(unit) : undefined)}
+              className="size-5 text-red-500"
+            />
+            <div className="flex flex-col">
+              <span className="text-xs text-gray-500">Max</span>
+              <div className="flex flex-row items-center gap-1">
+                <span className="font-mono text-xl font-bold">
+                  {hasData
+                    ? renderValueToReactNode(max, unit, renderValue)
+                    : "-"}
+                </span>
+                {hasData && (
+                  <span className="text-sm">{renderUnitSymbol(unit)}</span>
+                )}
+              </div>
+            </div>
+          </div>
+        </div>
+      </Label>
+
+      {/* Timeframe Selector (hidden when sharing selector externally) */}
+      {!hideSelector && (
+        <div className="flex flex-row flex-wrap gap-2">
+          {TIMEFRAME_OPTIONS.map((option) => (
+            <button
+              key={option.value}
+              onClick={() => {
+                if (onTimeframeChange) onTimeframeChange(option.value);
+                else setInternalTimeframe(option.value);
+              }}
+              className={`rounded-md px-3 py-1 text-sm transition-colors ${
+                selectedTimeframe === option.value
+                  ? "bg-blue-500 text-white"
+                  : "bg-gray-200 text-gray-700 hover:bg-gray-300"
+              }`}
+            >
+              {option.label}
+            </button>
+          ))}
+        </div>
+      )}
+    </div>
+  );
+}

electron/src/control/units.tsx

@@ -25,6 +25,8 @@ export function getUnitIcon(unit: Unit): IconName {
       return "lu:Gauge";
     case "mHz":
       return "lu:AudioWaveform";
+    case "Hz":
+      return "lu:AudioWaveform";
     case "W":
       return "lu:Zap";
     case "V":
@@ -35,6 +37,18 @@ export function getUnitIcon(unit: Unit): IconName {
       return "lu:BatteryFull";
     case "l/min":
       return "lu:Waves";
+    case "%":
+      return "lu:ChartNoAxesColumn";
+    case "µs":
+      return "lu:RefreshCcw";
+    case "s":
+      return "lu:Clock";
+    case "MiB":
+      return "lu:MemoryStick";
+    case "Mbit/s":
+      return "lu:Network";
+    case "/s":
+      return "lu:Gauge";
     default:
       return "lu:ChartNoAxesColumn";
   }
@@ -62,6 +76,8 @@ export function renderUnitSymbol(unit: Unit | undefined): string {
       return "m/min";
     case "mHz":
       return "mHz";
+    case "Hz":
+      return "Hz";
     case "W":
       return "W";
     case "V":
@@ -72,6 +88,18 @@ export function renderUnitSymbol(unit: Unit | undefined): string {
       return "kWh";
     case "l/min":
       return "l/min";
+    case "%":
+      return "%";
+    case "µs":
+      return "µs";
+    case "s":
+      return "s";
+    case "MiB":
+      return "MiB";
+    case "Mbit/s":
+      return "Mbit/s";
+    case "/s":
+      return "/s";
     default:
       return "";
   }
@@ -121,6 +149,8 @@ export function renderUnitSymbolLong(unit: Unit): string {
       return "meters/minute";
     case "mHz":
       return "millihertz";
+    case "Hz":
+      return "hertz";
     case "W":
       return "watts";
     case "V":
@@ -131,6 +161,18 @@ export function renderUnitSymbolLong(unit: Unit): string {
       return "kilowatt-hours";
     case "l/min":
       return "liters/minute";
+    case "%":
+      return "percent";
+    case "µs":
+      return "microseconds";
+    case "s":
+      return "seconds";
+    case "MiB":
+      return "mebibytes";
+    case "Mbit/s":
+      return "megabits/second";
+    case "/s":
+      return "per second";
     default:
       return "";
   }
@@ -147,11 +189,18 @@ export const units = [
   "bar",
   "m/min",
   "mHz",
+  "Hz",
   "W",
   "V",
   "A",
   "kWh",
   "l/min",
+  "%",
+  "µs",
+  "s",
+  "MiB",
+  "Mbit/s",
+  "/s",
 ] as const;
 
 export type Unit = (typeof units)[number];

electron/src/lib/timeseries.ts

@@ -38,6 +38,28 @@ export interface TimeSeriesWithInsert {
   insert: (series: TimeSeries, valueObj: TimeSeriesValue) => TimeSeries;
 }
 
+/**
+ * Configuration object for creating a time series
+ */
+export interface TimeSeriesConfig {
+  sampleIntervalShort: number;
+  sampleIntervalLong: number;
+  retentionDurationShort: number;
+  retentionDurationLong: number;
+}
+
+/**
+ * Default configuration values
+ * Short: 20ms sample, 5s retention
+ * Long: 1s sample, 1h retention
+ */
+export const DEFAULT_TIMESERIES_CONFIG: TimeSeriesConfig = {
+  sampleIntervalShort: 20, // 20ms
+  sampleIntervalLong: 1000, // 1s
+  retentionDurationShort: 5000, // 5s
+  retentionDurationLong: 60 * 60 * 1000, // 1h
+};
+
 /**
  * Extract data with time window filtering in chronological order
  */
@@ -177,13 +199,18 @@ export function seriesToUPlotData(
 
 /**
  * Factory function to create a new time series with circular buffers
+ * @param config Optional configuration object. If omitted or partial, defaults from DEFAULT_TIMESERIES_CONFIG are used.
  */
 export const createTimeSeries = (
-  sampleIntervalShort: number,
-  sampleIntervalLong: number,
-  retentionDurationShort: number,
-  retentionDurationLong: number,
+  config: Partial<TimeSeriesConfig> = {},
 ): TimeSeriesWithInsert => {
+  const {
+    sampleIntervalShort,
+    sampleIntervalLong,
+    retentionDurationShort,
+    retentionDurationLong,
+  } = { ...DEFAULT_TIMESERIES_CONFIG, ...config };
+
   const shortSize = Math.ceil(retentionDurationShort / sampleIntervalShort);
   const longSize = Math.ceil(retentionDurationLong / sampleIntervalLong);
 

electron/src/machines/analoginputtestmachine/AnalogInputTestMachineControlPage.tsx

@@ -0,0 +1,59 @@
+import { MiniGraph } from "@/components/graph/MiniGraph";
+import { Page } from "@/components/Page";
+import { ControlCard } from "@/control/ControlCard";
+import { ControlGrid } from "@/control/ControlGrid";
+
+import React from "react";
+import { useAnalogInputTestMachine } from "./useAnalogInputTestMachine";
+
+export function AnalogInputTestMachineControl(): React.JSX.Element {
+  const { seriesData, state, updateMeasurementRate } =
+    useAnalogInputTestMachine();
+
+  if (!seriesData) return <div>Initializing Sensor...</div>;
+
+  return (
+    <Page>
+      <ControlGrid columns={2}>
+        <ControlCard title="Measurement Control">
+          <div
+            style={{
+              display: "flex",
+              flexDirection: "row",
+              justifyContent: "space-between",
+            }}
+          >
+            <div>Measurement Rate (Hz)</div>
+            <input
+              type="number"
+              style={{
+                border: "2px solid transparent",
+                borderRadius: "4px",
+                padding: "3px",
+              }}
+              className={"bg-neutral-100 shadow"}
+              value={state.measurementRateHz}
+              onChange={(v) => {
+                const val = Number(v.currentTarget.value);
+                updateMeasurementRate(val);
+              }}
+              min={1}
+            ></input>
+          </div>
+        </ControlCard>
+        <ControlCard title="Results">
+          <div className="flex flex-row">
+            <MiniGraph
+              newData={seriesData}
+              width={500}
+              renderValue={(v) => v.toFixed(2)}
+            ></MiniGraph>
+            <div className="flex flex-col justify-center">
+              {seriesData.current?.value.toFixed(2)}mA
+            </div>
+          </div>
+        </ControlCard>
+      </ControlGrid>
+    </Page>
+  );
+}

electron/src/machines/analoginputtestmachine/AnalogInputTestMachinePage.tsx

@@ -0,0 +1,21 @@
+import { Topbar } from "@/components/Topbar";
+import { analogInputTestMachineSerialRoute } from "@/routes/routes";
+import React from "react";
+
+export function AnalogInputTestMachine(): React.JSX.Element {
+  const { serial } = analogInputTestMachineSerialRoute.useParams();
+
+  return (
+    <Topbar
+      pathname={`/_sidebar/machines/analoginputtestmachine/${serial}`}
+      items={[
+        {
+          link: "control",
+          activeLink: "control",
+          title: "Control",
+          icon: "lu:CirclePlay",
+        },
+      ]}
+    />
+  );
+}

electron/src/machines/analoginputtestmachine/useAnalogInputTestMachine.ts

@@ -0,0 +1,107 @@
+import { useMachineMutate } from "@/client/useClient";
+import {
+  createTimeSeries,
+  TimeSeries,
+  TimeSeriesValue,
+  TimeSeriesWithInsert,
+} from "@/lib/timeseries";
+import { useEffect, useMemo, useState } from "react";
+import z from "zod";
+import {
+  StateEvent,
+  useAnalogInputTestMachineNamespace,
+} from "./useAnalogInputTestMachineNamespace";
+import { toastError } from "@/components/Toast";
+import { MachineIdentificationUnique } from "../types";
+import { analogInputTestMachineSerialRoute } from "@/routes/routes";
+import { analogInputTestMachine } from "../properties";
+import { useStateOptimistic } from "@/lib/useStateOptimistic";
+import { produce } from "immer";
+
+export function useAnalogInputTestMachine() {
+  const { serial: serialString } =
+    analogInputTestMachineSerialRoute.useParams();
+  const machineIdentification: MachineIdentificationUnique = useMemo(() => {
+    const serial = parseInt(serialString);
+    if (isNaN(serial)) {
+      toastError(
+        "Invalid Serial Number",
+        `"${serialString}" is not a valid serial number.`,
+      );
+      return {
+        machine_identification: { vendor: 0, machine: 0 },
+        serial: 0,
+      };
+    }
+    return {
+      machine_identification: analogInputTestMachine.machine_identification,
+      serial,
+    };
+  }, [serialString]);
+
+  const state = useAnalogInputTestMachineNamespace({
+    type: "machine",
+    machine_identification_unique: machineIdentification,
+  });
+
+  const mutateMachine = useMachineMutate(
+    z.object({
+      measurement_rate_hz: z.number(),
+    }),
+  );
+
+  const stateOptimistic = useStateOptimistic<StateEvent>();
+
+  const updateStateOptimistically = (
+    producer: (current: StateEvent) => void,
+    serverRequest?: () => void,
+  ) => {
+    const currentState = stateOptimistic.value;
+    if (currentState)
+      stateOptimistic.setOptimistic(produce(currentState, producer));
+    serverRequest?.();
+  };
+
+  const updateMeasurementRate = (val: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.measurementRateHz = val;
+      },
+      () => {
+        mutateMachine.request({
+          machine_identification_unique: machineIdentification,
+          data: { measurement_rate_hz: val },
+        });
+      },
+    );
+  };
+
+  const timeSeries: TimeSeriesWithInsert = createTimeSeries({
+    sampleIntervalShort: 20,
+    sampleIntervalLong: 1000,
+    retentionDurationShort: 5000,
+    retentionDurationLong: 60 * 60 * 1000,
+  });
+
+  const [seriesData, setSeriesData] = useState<TimeSeries | null>(
+    timeSeries.initialTimeSeries,
+  );
+
+  useEffect(() => {
+    const measurement = state.currentMeasurement;
+
+    if (measurement && seriesData) {
+      const dataPoint: TimeSeriesValue = {
+        value: measurement[0] * 1000,
+        timestamp: Number(measurement[1]),
+      };
+      setSeriesData(timeSeries.insert(seriesData, dataPoint));
+    }
+  }, [state]);
+
+  return {
+    seriesData,
+    state,
+    updateMeasurementRate,
+  };
+}

electron/src/machines/analoginputtestmachine/useAnalogInputTestMachineNamespace.ts

@@ -0,0 +1,67 @@
+import {
+  createNamespaceHookImplementation,
+  EventHandler,
+  eventSchema,
+} from "@/client/socketioStore";
+import z from "zod";
+import { create, StoreApi } from "zustand";
+
+// ========== Event Schema ==========
+
+export const stateEventDataSchema = z.object({
+  measurementRateHz: z.number().optional(),
+  currentMeasurement: z.tuple([z.number(), z.string()]).optional(),
+});
+
+export const stateEventSchema = eventSchema(stateEventDataSchema);
+
+export type StateEvent = z.infer<typeof stateEventDataSchema>;
+
+// ========== Store ==========
+export type AnalogInputTestMachineNamespaceStore = z.infer<
+  typeof stateEventDataSchema
+>;
+
+const createMachineStore = (): StoreApi<AnalogInputTestMachineNamespaceStore> =>
+  create<AnalogInputTestMachineNamespaceStore>(() => ({
+    measurementRateHz: 1,
+    currentMeasurement: undefined,
+  }));
+
+// ========== Message Handler ==========
+function analogInputTestMachineMessageHandler(
+  store: StoreApi<AnalogInputTestMachineNamespaceStore>,
+): EventHandler {
+  return (event) => {
+    const oldState = store.getState();
+    const newMeasurementDataHz = event.data["MeasurementRateHz"];
+    const newMeasurement: [number, string] = event.data["Measurement"];
+
+    switch (event.name) {
+      case "MeasurementRateHz":
+        if (
+          newMeasurementDataHz &&
+          newMeasurementDataHz !== oldState.measurementRateHz
+        )
+          store.setState({
+            ...oldState,
+            measurementRateHz: newMeasurementDataHz,
+          });
+        break;
+      case "Measurement":
+        if (newMeasurement && newMeasurement !== oldState.currentMeasurement)
+          store.setState({
+            ...oldState,
+            currentMeasurement: newMeasurement,
+          });
+        break;
+    }
+  };
+}
+
+// ========== Namespace Hook ==========
+export const useAnalogInputTestMachineNamespace =
+  createNamespaceHookImplementation({
+    createStore: () => createMachineStore(),
+    createEventHandler: analogInputTestMachineMessageHandler,
+  });

electron/src/machines/aquapath/aquapath1/Aquapath1ControlPage.tsx

@@ -39,7 +39,7 @@ export function Aquapath1ControlPage() {
           <div className="grid grid-cols-2 gap-6">
             <div className="flex flex-col gap-8">
               <TimeSeriesValueNumeric
-                label="Front Flow"
+                label="Flow 1"
                 unit="l/min"
                 timeseries={front_flow}
                 renderValue={(value) => value.toFixed(1)}
@@ -48,7 +48,7 @@ export function Aquapath1ControlPage() {
 
             <div className="flex flex-col gap-8">
               <TimeSeriesValueNumeric
-                label="Back Flow"
+                label="Flow 2"
                 unit="l/min"
                 timeseries={back_flow}
                 renderValue={(value) => value.toFixed(1)}
@@ -57,7 +57,7 @@ export function Aquapath1ControlPage() {
           </div>
 
           <div className="mt-8">
-            <Label label="Front Pump">
+            <Label label="Pump 1">
               <SelectionGroup<"On" | "Off">
                 value={frontTargetFlow ? "On" : "Off"}
                 orientation="vertical"
@@ -86,7 +86,7 @@ export function Aquapath1ControlPage() {
               />
             </Label>
 
-            <Label label="Back Pump">
+            <Label label="Pump 2">
               <SelectionGroup<"On" | "Off">
                 value={backTargetFlow ? "On" : "Off"}
                 orientation="vertical"
@@ -121,22 +121,19 @@ export function Aquapath1ControlPage() {
           <div className="grid grid-cols-2 gap-6">
             <div className="flex flex-col gap-8">
               <TimeSeriesValueNumeric
-                label="Front in"
+                label="Reservoir 1"
                 unit="C"
                 timeseries={front_temperature}
                 renderValue={(value) => value.toFixed(1)}
               />
-              <TimeSeriesValueNumeric
-                label="Front Reservoir"
-                unit="C"
-                timeseries={front_temp_reservoir}
-                renderValue={(value) => value.toFixed(1)}
-              />
-              <Label label="Set Front Target Temperature">
+              <Label label="Set Reservoir 1 Target Temperature">
                 <EditValue
-                  title="Set Front Target Temperature"
+                  title="Set Reservoir 1 Target Temperature"
                   value={frontTargetTemperature}
                   unit="C"
+                  step={0.1}
+                  min={0.0}
+                  max={80.0}
                   renderValue={(value) => value.toFixed(1)}
                   onChange={(val) => {
                     setFrontTemperature(val);
@@ -150,22 +147,19 @@ export function Aquapath1ControlPage() {
 
             <div className="flex flex-col gap-8">
               <TimeSeriesValueNumeric
-                label="Back in"
+                label="Reservoir 2"
                 unit="C"
                 timeseries={back_temperature}
                 renderValue={(value) => value.toFixed(1)}
               />
-              <TimeSeriesValueNumeric
-                label="Back Reservoir"
-                unit="C"
-                timeseries={back_temp_reservoir}
-                renderValue={(value) => value.toFixed(1)}
-              />
-              <Label label="Set Back Target Temperature">
+              <Label label="Set Reservoir 2 Target Temperature">
                 <EditValue
-                  title="Set Back Target Temperature"
+                  title="Set Reservoir 2 Target Temperature"
                   value={backTargetTemperature}
                   unit="C"
+                  step={0.1}
+                  min={0.0}
+                  max={80.0}
                   renderValue={(value) => value.toFixed(1)}
                   onChange={(val) => {
                     setBackTemperature(val);

electron/src/machines/aquapath/aquapath1/aquapath1Namespace.ts

@@ -98,37 +98,17 @@ export type Aquapath1NamespaceStore = {
   back_temp_reservoir: TimeSeries;
 };
 
-// Constants for time durations
-const TWENTY_MILLISECOND = 20;
-const ONE_SECOND = 1000;
-const FIVE_SECOND = 5 * ONE_SECOND;
-const ONE_HOUR = 60 * 60 * ONE_SECOND;
-
 const { initialTimeSeries: front_temperature, insert: addTemperature1 } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: back_temperature, insert: addTemperature2 } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: front_temp_reservoir, insert: addTempReserv1 } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: back_temp_reservoir, insert: addTempReserv2 } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
+  createTimeSeries();
+const { initialTimeSeries: front_flow, insert: addFlow1 } = createTimeSeries();
+const { initialTimeSeries: back_flow, insert: addFlow2 } = createTimeSeries();
 
-const { initialTimeSeries: front_flow, insert: addFlow1 } = createTimeSeries(
-  TWENTY_MILLISECOND,
-  ONE_SECOND,
-  FIVE_SECOND,
-  ONE_HOUR,
-);
-
-const { initialTimeSeries: back_flow, insert: addFlow2 } = createTimeSeries(
-  TWENTY_MILLISECOND,
-  ONE_SECOND,
-  FIVE_SECOND,
-  ONE_HOUR,
-);
 /**
  * Factory function to create a new Aquapath namespace store
  * @returns A new Zustand store instance for Aquapath namespace

electron/src/machines/buffer/buffer1/buffer1Namespace.ts

@@ -62,7 +62,6 @@ export const connectedMachineStateSchema = z.object({
 /**
  * Consolidated state event schema (state changes only)
  */
-
 export const stateEventDataSchema = z.object({
   mode_state: modeStateSchema,
   connected_machine_state: connectedMachineStateSchema,

electron/src/machines/extruder/extruder2/Extruder2ControlPage.tsx

@@ -152,7 +152,7 @@ export function Extruder2ControlPage() {
                 unit="rpm"
                 title="Target Output RPM"
                 min={0}
-                max={106}
+                max={44}
                 renderValue={(value) => roundToDecimals(value, 0)}
                 onChange={setInverterTargetRpm}
               />

electron/src/machines/extruder/extruder2/Extruder2Settings.tsx

@@ -239,6 +239,50 @@ export function Extruder2SettingsPage() {
                 />
               </Label>
             </ControlCard>
+            <ControlCard title="Temperature PID Settings (Nozzle) ">
+              <Label label="Kp">
+                <EditValue
+                  value={state?.pid_settings.temperature.nozzle.kp}
+                  defaultValue={
+                    defaultState?.pid_settings.temperature.nozzle.kp
+                  }
+                  min={0}
+                  max={100}
+                  step={0.001}
+                  renderValue={(v) => roundToDecimals(v, 3)}
+                  onChange={(v) => setTemperaturePidValue("nozzle", "kp", v)}
+                  title="Temperature PID KP"
+                />
+              </Label>
+              <Label label="Ki">
+                <EditValue
+                  value={state?.pid_settings.temperature.nozzle.ki}
+                  defaultValue={
+                    defaultState?.pid_settings.temperature.nozzle.ki
+                  }
+                  min={0}
+                  max={100}
+                  step={0.001}
+                  renderValue={(v) => roundToDecimals(v, 3)}
+                  onChange={(v) => setTemperaturePidValue("nozzle", "ki", v)}
+                  title="Temperature PID KI"
+                />
+              </Label>
+              <Label label="Kd">
+                <EditValue
+                  value={state?.pid_settings.temperature.nozzle.kd}
+                  defaultValue={
+                    defaultState?.pid_settings.temperature.nozzle.kd
+                  }
+                  min={0}
+                  max={100}
+                  step={0.001}
+                  renderValue={(v) => roundToDecimals(v, 3)}
+                  onChange={(v) => setTemperaturePidValue("nozzle", "kd", v)}
+                  title="Temperature PID KD"
+                />
+              </Label>
+            </ControlCard>
           </ControlGrid>
         </>
       )}

electron/src/machines/extruder/extruder2/extruder2Namespace.ts

@@ -149,6 +149,12 @@ export const pidSettingsSchema = z.object({
       kd: z.number(),
       zone: z.string(),
     }),
+    nozzle: z.object({
+      ki: z.number(),
+      kp: z.number(),
+      kd: z.number(),
+      zone: z.string(),
+    }),
   }),
   pressure: z.object({
     ki: z.number(),
@@ -217,64 +223,35 @@ export type Extruder2NamespaceStore = {
   totalEnergyKWh: TimeSeries;
 };
 
-// Constants for time durations
-const TWENTY_MILLISECOND = 20;
-const ONE_SECOND = 1000;
-const FIVE_SECOND = 5 * ONE_SECOND;
-const ONE_HOUR = 60 * 60 * ONE_SECOND;
-
-const { initialTimeSeries: pressure, insert: addPressure } = createTimeSeries(
-  TWENTY_MILLISECOND,
-  ONE_SECOND,
-  FIVE_SECOND,
-  ONE_HOUR,
-);
-
+const { initialTimeSeries: pressure, insert: addPressure } = createTimeSeries();
 const { initialTimeSeries: backTemperature, insert: addBackTemperature } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: frontTemperature, insert: addFrontTemperature } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: middleTemperature, insert: addMiddleTemperature } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: nozzleTemperature, insert: addNozzleTemperature } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: nozzlePower, insert: addNozzlePower } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: frontPower, insert: addFrontPower } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: middlePower, insert: addMiddlePower } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
-const { initialTimeSeries: backPower, insert: addBackPower } = createTimeSeries(
-  TWENTY_MILLISECOND,
-  ONE_SECOND,
-  FIVE_SECOND,
-  ONE_HOUR,
-);
-
+  createTimeSeries();
+const { initialTimeSeries: backPower, insert: addBackPower } =
+  createTimeSeries();
 const { initialTimeSeries: combinedPower, insert: addCombinedPower } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: totalEnergyKWh, insert: addTotalEnergyKWh } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: motorCurrent, insert: addMotorCurrent } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: motorFrequency, insert: addMotorFrequency } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: motorScrewRpm, insert: addMotorScrewRpm } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
-
+  createTimeSeries();
 const { initialTimeSeries: motorPower, insert: addMotorPower } =
-  createTimeSeries(TWENTY_MILLISECOND, ONE_SECOND, FIVE_SECOND, ONE_HOUR);
+  createTimeSeries();
 
 export function extruder2MessageHandler(
   store: StoreApi<Extruder2NamespaceStore>,

electron/src/machines/extruder/extruder2/useExtruder.ts

@@ -294,7 +294,7 @@ export function useExtruder2() {
   };
 
   const setTemperaturePidValue = (
-    zone: "front" | "middle" | "back",
+    zone: "front" | "middle" | "back" | "nozzle",
     key: "kp" | "ki" | "kd",
     value: number,
   ) => {

electron/src/machines/extruder/extruder3/Extruder3ControlPage.tsx

@@ -0,0 +1,258 @@
+import { ControlCard } from "@/control/ControlCard";
+import { Page } from "@/components/Page";
+import React from "react";
+import { ControlGrid } from "@/control/ControlGrid";
+import {
+  SelectionGroup,
+  SelectionGroupBoolean,
+} from "@/control/SelectionGroup";
+import { HeatingZone } from "../HeatingZone";
+import { Label } from "@/control/Label";
+import { EditValue } from "@/control/EditValue";
+import { roundToDecimals } from "@/lib/decimal";
+import { useExtruder3 } from "./useExtruder";
+import { TimeSeriesValueNumeric } from "@/control/TimeSeriesValue";
+import { StatusBadge } from "@/control/StatusBadge";
+
+export function Extruder3ControlPage() {
+  const {
+    state,
+    defaultState,
+    nozzleTemperature,
+    nozzlePower,
+    frontTemperature,
+    frontPower,
+    backTemperature,
+    backPower,
+    middleTemperature,
+    middlePower,
+    pressure,
+
+    motorScrewRpm,
+    motorPower,
+    motorCurrent,
+    totalEnergyKWh,
+    combinedPower,
+
+    setExtruderMode,
+    setBackHeatingTemperature,
+    setFrontHeatingTemperature,
+    setMiddleHeatingTemperature,
+    setNozzleHeatingTemperature,
+    setInverterRegulation,
+    setInverterTargetPressure,
+    setInverterTargetRpm,
+
+    isLoading,
+    isDisabled,
+  } = useExtruder3();
+
+  function isZoneReadyForExtrusion(
+    temperature: number,
+    targetTemperature: number,
+  ) {
+    // if temperature is 90% of the target temperature, then we are ready for extrusion
+    return temperature >= 0.9 * targetTemperature && targetTemperature > 0.0;
+  }
+
+  const allZonesReadyForExtrude = () => {
+    const frontReady = isZoneReadyForExtrusion(
+      frontTemperature.current?.value ?? 0,
+      state?.heating_states.front.target_temperature ?? 1,
+    );
+    const middleReady = isZoneReadyForExtrusion(
+      middleTemperature.current?.value ?? 0,
+      state?.heating_states.middle.target_temperature ?? 1,
+    );
+    const backReady = isZoneReadyForExtrusion(
+      backTemperature.current?.value ?? 0,
+      state?.heating_states.back.target_temperature ?? 1,
+    );
+    const nozzleReady = isZoneReadyForExtrusion(
+      nozzleTemperature.current?.value ?? 0,
+      state?.heating_states.nozzle.target_temperature ?? 1,
+    );
+
+    return frontReady && middleReady && backReady && nozzleReady;
+  };
+
+  return (
+    <Page>
+      <ControlGrid>
+        <HeatingZone
+          title={"Heating Front"}
+          heatingState={state?.heating_states.front}
+          heatingTimeSeries={frontTemperature}
+          heatingPower={frontPower}
+          onChangeTargetTemp={setFrontHeatingTemperature}
+          min={0}
+          max={300}
+        />
+        <HeatingZone
+          title={"Heating Middle"}
+          heatingState={state?.heating_states.middle}
+          heatingTimeSeries={middleTemperature}
+          heatingPower={middlePower}
+          onChangeTargetTemp={setMiddleHeatingTemperature}
+          min={0}
+          max={300}
+        />
+        <HeatingZone
+          title={"Heating Back"}
+          heatingState={state?.heating_states.back}
+          heatingTimeSeries={backTemperature}
+          heatingPower={backPower}
+          onChangeTargetTemp={setBackHeatingTemperature}
+          min={0}
+          max={300}
+        />
+        <HeatingZone
+          title={"Heating Nozzle"}
+          heatingState={state?.heating_states.nozzle}
+          heatingTimeSeries={nozzleTemperature}
+          heatingPower={nozzlePower}
+          onChangeTargetTemp={setNozzleHeatingTemperature}
+          min={0}
+          max={300}
+        />
+        <ControlCard className="bg-red" title="Screw Drive">
+          {state?.inverter_status_state.overload_warning == true ? (
+            <StatusBadge variant="error">
+              Inverter is overloaded! Please check the extruder and reduce load
+              if necessary.
+            </StatusBadge>
+          ) : state?.inverter_status_state.fault_occurence == true ? (
+            <StatusBadge variant="error">
+              Inverter encountered an error!! Press the restart button in Config
+            </StatusBadge>
+          ) : state?.inverter_status_state.running == true &&
+            state.inverter_status_state.fault_occurence == false ? (
+            <StatusBadge variant="success">Running</StatusBadge>
+          ) : null}
+          {state?.inverter_status_state.running == false &&
+            state.inverter_status_state.fault_occurence == false && (
+              <StatusBadge variant="success">Healthy</StatusBadge>
+            )}
+
+          <Label label="Regulation">
+            <SelectionGroupBoolean
+              value={state?.regulation_state.uses_rpm}
+              optionTrue={{ children: "RPM" }}
+              optionFalse={{ children: "Pressure" }}
+              onChange={setInverterRegulation}
+              disabled={isDisabled}
+              loading={isLoading}
+            />
+          </Label>
+          <div className="flex flex-row flex-wrap gap-4">
+            <Label label="Target Output RPM">
+              <EditValue
+                value={state?.screw_state.target_rpm}
+                defaultValue={defaultState?.screw_state.target_rpm}
+                unit="rpm"
+                title="Target Output RPM"
+                min={0}
+                max={100}
+                renderValue={(value) => roundToDecimals(value, 0)}
+                onChange={setInverterTargetRpm}
+              />
+            </Label>
+            <Label label="Target Pressure">
+              <EditValue
+                value={state?.pressure_state.target_bar}
+                defaultValue={defaultState?.pressure_state.target_bar}
+                unit="bar"
+                title="Target Pressure"
+                min={0.0}
+                max={270.0}
+                renderValue={(value) => roundToDecimals(value, 0)}
+                onChange={setInverterTargetPressure}
+              />
+            </Label>
+          </div>
+          <div className="flex flex-row flex-wrap gap-4">
+            <TimeSeriesValueNumeric
+              label="Rpm"
+              unit="rpm"
+              renderValue={(value) => roundToDecimals(value, 0)}
+              timeseries={motorScrewRpm}
+            />
+
+            {state?.pressure_state?.wiring_error && (
+              <StatusBadge variant="error">
+                Cant Measure Pressure! Check Pressure Sensor Wiring!
+              </StatusBadge>
+            )}
+            <TimeSeriesValueNumeric
+              label="Pressure"
+              unit="bar"
+              renderValue={(value) => roundToDecimals(value, 0)}
+              timeseries={pressure}
+            />
+          </div>
+        </ControlCard>
+
+        <ControlCard className="bg-red" title="Mode">
+          <SelectionGroup<"Standby" | "Heat" | "Extrude">
+            value={state?.mode_state.mode}
+            orientation="vertical"
+            className="grid h-full grid-cols-2 gap-2"
+            options={{
+              Standby: {
+                children: "Standby",
+                icon: "lu:CirclePause",
+                isActiveClassName: "bg-green-600",
+                className: "h-full",
+              },
+              Heat: {
+                children: "Heat",
+                icon: "lu:Flame",
+                isActiveClassName: "bg-green-600",
+                className: "h-full",
+              },
+              Extrude: {
+                children: "Extrude",
+                icon: "lu:ArrowBigLeftDash",
+                isActiveClassName: "bg-green-600",
+                className: "h-full",
+                confirmation: allZonesReadyForExtrude()
+                  ? undefined
+                  : "Temperature is too low. Are you sure you want to extrude?",
+              },
+            }}
+            onChange={setExtruderMode}
+            disabled={isDisabled}
+            loading={isLoading}
+          />
+        </ControlCard>
+
+        <ControlCard className="bg-blue" title="Power Consumption">
+          <TimeSeriesValueNumeric
+            label="Total Power"
+            unit="W"
+            renderValue={(value) => roundToDecimals(value, 0)}
+            timeseries={combinedPower}
+          />
+          <TimeSeriesValueNumeric
+            label="Motor Power"
+            unit="W"
+            renderValue={(value) => roundToDecimals(value, 0)}
+            timeseries={motorPower}
+          />
+          <TimeSeriesValueNumeric
+            label="Motor Current"
+            unit="A"
+            renderValue={(value) => roundToDecimals(value, 1)}
+            timeseries={motorCurrent}
+          />
+          <TimeSeriesValueNumeric
+            label="Total Energy Consumption"
+            unit="kWh"
+            renderValue={(value) => roundToDecimals(value, 3)}
+            timeseries={totalEnergyKWh}
+          />
+        </ControlCard>
+      </ControlGrid>
+    </Page>
+  );
+}

electron/src/machines/extruder/extruder3/Extruder3Graph.tsx

@@ -0,0 +1,325 @@
+import { Page } from "@/components/Page";
+import {
+  AutoSyncedBigGraph,
+  SyncedFloatingControlPanel,
+  useGraphSync,
+  type GraphConfig,
+} from "@/components/graph";
+import React from "react";
+import { useExtruder3 } from "./useExtruder";
+
+export function Extruder3GraphsPage() {
+  const {
+    state,
+    nozzleTemperature,
+    nozzlePower,
+    frontTemperature,
+    frontPower,
+    backTemperature,
+    backPower,
+    middleTemperature,
+    middlePower,
+    pressure,
+    motorScrewRpm,
+    motorCurrent,
+    motorPower,
+    combinedPower,
+  } = useExtruder3();
+
+  const syncHook = useGraphSync("extruder-graphs");
+
+  // Base config
+  const baseConfig: GraphConfig = {
+    defaultTimeWindow: 30 * 60 * 1000, // 30 minutes
+    exportFilename: "extruder_data",
+    showLegend: true,
+    title: "extruder data",
+  };
+
+  const temperatureData = [
+    ...(nozzleTemperature
+      ? [
+          {
+            newData: nozzleTemperature,
+            title: "Nozzle",
+            color: "#ef4444",
+            lines:
+              state?.heating_states.nozzle?.target_temperature !== undefined
+                ? [
+                    {
+                      type: "target" as const,
+                      value: state.heating_states.nozzle.target_temperature,
+                      color: "#ef4444",
+                      show: true,
+                    },
+                  ]
+                : [],
+          },
+        ]
+      : []),
+    ...(frontTemperature
+      ? [
+          {
+            newData: frontTemperature,
+            title: "Front",
+            color: "#f59e0b",
+            lines:
+              state?.heating_states.front?.target_temperature !== undefined
+                ? [
+                    {
+                      type: "target" as const,
+                      value: state.heating_states.front.target_temperature,
+                      color: "#f59e0b",
+                      show: true,
+                    },
+                  ]
+                : [],
+          },
+        ]
+      : []),
+    ...(middleTemperature
+      ? [
+          {
+            newData: middleTemperature,
+            title: "Middle",
+            color: "#8b5cf6",
+            lines:
+              state?.heating_states.middle?.target_temperature !== undefined
+                ? [
+                    {
+                      type: "target" as const,
+                      value: state.heating_states.middle.target_temperature,
+                      color: "#8b5cf6",
+                      show: true,
+                    },
+                  ]
+                : [],
+          },
+        ]
+      : []),
+    ...(backTemperature
+      ? [
+          {
+            newData: backTemperature,
+            title: "Back",
+            color: "#3b82f6",
+            lines:
+              state?.heating_states.back?.target_temperature !== undefined
+                ? [
+                    {
+                      type: "target" as const,
+                      value: state.heating_states.back.target_temperature,
+                      color: "#3b82f6",
+                      show: true,
+                    },
+                  ]
+                : [],
+          },
+        ]
+      : []),
+  ];
+
+  const temperatureConfig: GraphConfig = {
+    ...baseConfig,
+    title: "Temperatures",
+    exportFilename: "temperatures_data",
+    colors: {
+      primary: "#ef4444",
+      grid: "#e2e8f0",
+      axis: "#64748b",
+      background: "#ffffff",
+    },
+  };
+
+  // Combined Power Graph (no target lines for power)
+  const powerData = [
+    ...(nozzlePower
+      ? [
+          {
+            newData: nozzlePower,
+            title: "Nozzle",
+            color: "#ef4444",
+          },
+        ]
+      : []),
+    ...(frontPower
+      ? [
+          {
+            newData: frontPower,
+            title: "Front",
+            color: "#f59e0b",
+          },
+        ]
+      : []),
+    ...(middlePower
+      ? [
+          {
+            newData: middlePower,
+            title: "Middle",
+            color: "#8b5cf6",
+          },
+        ]
+      : []),
+    ...(backPower
+      ? [
+          {
+            newData: backPower,
+            title: "Back",
+            color: "#3b82f6",
+          },
+        ]
+      : []),
+    ...(motorPower
+      ? [
+          {
+            newData: motorPower,
+            title: "Motor",
+            color: "#10b981",
+          },
+        ]
+      : []),
+    ...(combinedPower
+      ? [
+          {
+            newData: combinedPower,
+            title: "Total",
+            color: "#000000",
+          },
+        ]
+      : []),
+  ];
+
+  const powerConfig: GraphConfig = {
+    ...baseConfig,
+    title: "Power Outputs",
+    exportFilename: "power_data",
+    colors: {
+      primary: "#10b981",
+      grid: "#e2e8f0",
+      axis: "#64748b",
+      background: "#ffffff",
+    },
+  };
+
+  const currentConfig: GraphConfig = {
+    ...baseConfig,
+    title: "Motor Current",
+    exportFilename: "motor_current_data",
+    colors: {
+      primary: "#3b82f6",
+      grid: "#e2e8f0",
+      axis: "#64748b",
+      background: "#ffffff",
+    },
+  };
+
+  // Pressure Graph with connected target line
+  const pressureConfig: GraphConfig = {
+    ...baseConfig,
+    title: "Pressure",
+    exportFilename: "pressure_data",
+    colors: {
+      primary: "#3b82f6",
+      grid: "#e2e8f0",
+      axis: "#64748b",
+      background: "#ffffff",
+    },
+  };
+
+  // RPM Graph with connected target line
+  const rpmConfig: GraphConfig = {
+    ...baseConfig,
+    title: "RPM",
+    exportFilename: "rpm_data",
+    colors: {
+      primary: "#8b5cf6",
+      grid: "#e2e8f0",
+      axis: "#64748b",
+      background: "#ffffff",
+    },
+  };
+
+  return (
+    <Page className="pb-25">
+      <div className="flex flex-col gap-4">
+        <AutoSyncedBigGraph
+          syncHook={syncHook}
+          newData={{
+            newData: pressure,
+            color: "#3b82f6",
+            lines:
+              state?.pressure_state.target_bar !== undefined
+                ? [
+                    {
+                      type: "target" as const,
+                      value: state.pressure_state.target_bar,
+                      color: "#3b82f6",
+                      show: true,
+                    },
+                  ]
+                : [],
+          }}
+          config={pressureConfig}
+          unit="bar"
+          renderValue={(value) => value.toFixed(2)}
+          graphId="pressure-graph"
+        />
+
+        <AutoSyncedBigGraph
+          syncHook={syncHook}
+          newData={temperatureData}
+          config={temperatureConfig}
+          unit="C"
+          renderValue={(value) => value.toFixed(1)}
+          graphId="combined-temperatures"
+        />
+
+        <AutoSyncedBigGraph
+          syncHook={syncHook}
+          newData={powerData}
+          config={powerConfig}
+          unit="W"
+          renderValue={(value) => value.toFixed(1)}
+          graphId="combined-power"
+        />
+
+        <AutoSyncedBigGraph
+          syncHook={syncHook}
+          newData={{
+            newData: motorCurrent,
+            color: "#3b82f6",
+          }}
+          config={currentConfig}
+          unit="A"
+          renderValue={(value) => value.toFixed(2)}
+          graphId="motor-current"
+        />
+
+        <AutoSyncedBigGraph
+          syncHook={syncHook}
+          newData={{
+            newData: motorScrewRpm,
+            color: "#8b5cf6",
+            lines:
+              state?.screw_state.target_rpm !== undefined
+                ? [
+                    {
+                      type: "target" as const,
+                      value: state.screw_state.target_rpm,
+                      color: "#8b5cf6",
+                      show: true,
+                    },
+                  ]
+                : [],
+          }}
+          config={rpmConfig}
+          unit="rpm"
+          renderValue={(value) => value.toFixed(0)}
+          graphId="rpm-graph"
+        />
+      </div>
+
+      <SyncedFloatingControlPanel controlProps={syncHook.controlProps} />
+    </Page>
+  );
+}

electron/src/machines/extruder/extruder3/Extruder3Manual.tsx

@@ -0,0 +1,12 @@
+import { Page } from "@/components/Page";
+import { MarkdownWithToc } from "@/components/MarkdownWithToc";
+import React from "react";
+import extruderManualContent from "@/assets/markdown/extruder/manual.md?raw";
+
+export function ExtruderV3ManualPage() {
+  return (
+    <Page>
+      <MarkdownWithToc markdownContent={extruderManualContent} />
+    </Page>
+  );
+}

electron/src/machines/extruder/extruder3/Extruder3Page.tsx

@@ -0,0 +1,44 @@
+import { Topbar } from "@/components/Topbar";
+import { extruder3Route } from "@/routes/routes";
+import React from "react";
+
+export function Extruder3Page() {
+  const { serial } = extruder3Route.useParams();
+  return (
+    <Topbar
+      pathname={`/_sidebar/machines/extruder3/${serial}`}
+      items={[
+        {
+          link: "control",
+          title: "Control",
+          icon: "lu:CirclePlay",
+          activeLink: "control",
+        },
+        {
+          link: "graphs",
+          title: "Graphs",
+          icon: "lu:ChartSpline",
+          activeLink: "graphs",
+        },
+        {
+          link: "settings",
+          title: "Config",
+          icon: "lu:Settings",
+          activeLink: "settings",
+        },
+        {
+          link: "manual",
+          title: "Manual",
+          icon: "lu:BookOpen",
+          activeLink: "manual",
+        },
+        {
+          link: "presets",
+          title: "Presets",
+          icon: "lu:Save",
+          activeLink: "presets",
+        },
+      ]}
+    />
+  );
+}

electron/src/machines/extruder/extruder3/Extruder3PresetsPage.tsx

@@ -0,0 +1,203 @@
+import React from "react";
+import { PresetsPage } from "@/components/preset/PresetsPage";
+import { extruder3 } from "@/machines/properties";
+import { useExtruder3 } from "./useExtruder";
+import { z } from "zod";
+import {
+  PresetPreviewEntries,
+  previewSeparator,
+} from "@/components/preset/PresetPreviewTable";
+import { Preset, PresetData } from "@/lib/preset/preset";
+
+const extruder3PresetDataSchema = z
+  .object({
+    targetFrontHeatingTemperature: z.number(),
+    targetMiddleHeatingTemperature: z.number(),
+    targetBackHeatingTemperature: z.number(),
+    targetNozzleHeatingTemperature: z.number(),
+
+    targetInverterRpm: z.number(),
+    targetInverterPressure: z.number(),
+    inverterRegulation: z.enum(["RPM", "Pressure"]),
+
+    inverterRotationDirection: z.enum(["Forward", "Backward"]),
+
+    pressureLimit: z.number(),
+    pressureLimitEnabled: z.boolean(),
+
+    pidPressureKp: z.number(),
+    pidPressureKi: z.number(),
+    pidPressureKd: z.number(),
+  })
+  .partial();
+
+type Extruder3 = typeof extruder3PresetDataSchema;
+
+const schemas = new Map([[1, extruder3PresetDataSchema]]);
+
+const previewEntries: PresetPreviewEntries<Extruder3> = [
+  {
+    name: "Target Front Temperature",
+    unit: "C",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.targetFrontHeatingTemperature?.toFixed(1),
+  },
+  {
+    name: "Target Middle Temperature",
+    unit: "C",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.targetMiddleHeatingTemperature?.toFixed(1),
+  },
+  {
+    name: "Target Back Temperature",
+    unit: "C",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.targetBackHeatingTemperature?.toFixed(1),
+  },
+  {
+    name: "Target Nozzle Temperature",
+    unit: "C",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.targetNozzleHeatingTemperature?.toFixed(1),
+  },
+  previewSeparator,
+  {
+    name: "Inverter Regulation",
+    renderValue: (data: PresetData<Extruder3>) => data.inverterRegulation,
+  },
+  {
+    name: "Target Inverter RPM",
+    unit: "rpm",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.targetInverterRpm?.toFixed(2),
+  },
+  {
+    name: "Target Inverter Pressure",
+    unit: "bar",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.targetInverterPressure?.toFixed(1),
+  },
+  {
+    name: "Inverter Direction",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.inverterRotationDirection,
+  },
+  previewSeparator,
+  {
+    name: "Pressure Limit",
+    unit: "bar",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.pressureLimit?.toFixed(1),
+  },
+  {
+    name: "Enable Pressure Limit",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.pressureLimitEnabled ? "on" : "off",
+  },
+  previewSeparator,
+  {
+    name: "PID Pressue Kp",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.pidPressureKp?.toFixed(4),
+  },
+  {
+    name: "PID Pressue Ki",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.pidPressureKi?.toFixed(4),
+  },
+  {
+    name: "PID Pressue Kd",
+    renderValue: (data: PresetData<Extruder3>) =>
+      data.pidPressureKd?.toFixed(4),
+  },
+];
+
+export function Extruder3PresetsPage() {
+  const {
+    state,
+    defaultState,
+
+    setFrontHeatingTemperature,
+    setMiddleHeatingTemperature,
+    setBackHeatingTemperature,
+    setNozzleHeatingTemperature,
+
+    setInverterTargetRpm,
+    setInverterTargetPressure,
+    setInverterRegulation,
+    setInverterRotationDirection,
+
+    setExtruderPressureLimit,
+    setExtruderPressureLimitEnabled,
+
+    setPressurePidKd,
+    setPressurePidKi,
+    setPressurePidKp,
+  } = useExtruder3();
+
+  const toPresetData = (s?: typeof state): PresetData<Extruder3> => ({
+    targetFrontHeatingTemperature: s?.heating_states.front.target_temperature,
+    targetMiddleHeatingTemperature: s?.heating_states.middle.target_temperature,
+    targetBackHeatingTemperature: s?.heating_states.back.target_temperature,
+    targetNozzleHeatingTemperature: s?.heating_states.nozzle.target_temperature,
+
+    targetInverterRpm: s?.screw_state.target_rpm,
+    targetInverterPressure: s?.pressure_state.target_bar,
+    inverterRegulation: s?.regulation_state.uses_rpm ? "RPM" : "Pressure",
+
+    inverterRotationDirection: s?.rotation_state?.forward
+      ? "Forward"
+      : "Backward",
+
+    pressureLimit: s?.extruder_settings_state.pressure_limit,
+    pressureLimitEnabled: s?.extruder_settings_state.pressure_limit_enabled,
+
+    pidPressureKp: s?.pid_settings.pressure.kp,
+    pidPressureKi: s?.pid_settings.pressure.ki,
+    pidPressureKd: s?.pid_settings.pressure.kd,
+  });
+
+  const defaults = toPresetData(defaultState);
+
+  const applyPreset = (preset: Preset<Extruder3>) => {
+    setFrontHeatingTemperature(
+      preset.data.targetFrontHeatingTemperature ?? 150.0,
+    );
+    setMiddleHeatingTemperature(
+      preset.data.targetMiddleHeatingTemperature ?? 150.0,
+    );
+    setBackHeatingTemperature(
+      preset.data.targetBackHeatingTemperature ?? 150.0,
+    );
+    setNozzleHeatingTemperature(
+      preset.data.targetNozzleHeatingTemperature ?? 150.0,
+    );
+
+    setInverterTargetRpm(preset.data.targetInverterRpm ?? 0);
+    setInverterTargetPressure(preset.data.targetInverterPressure ?? 0);
+    setInverterRegulation(preset.data.inverterRegulation === "RPM");
+
+    setInverterRotationDirection(
+      preset.data.inverterRotationDirection === "Forward",
+    );
+
+    setExtruderPressureLimit(preset.data.pressureLimit ?? 100.0);
+    setExtruderPressureLimitEnabled(preset.data.pressureLimitEnabled ?? true);
+
+    setPressurePidKp(preset.data.pidPressureKp ?? 0.16);
+    setPressurePidKi(preset.data.pidPressureKi ?? 0.0);
+    setPressurePidKd(preset.data.pidPressureKd ?? 0.008);
+  };
+
+  return (
+    <PresetsPage
+      machine_identification={extruder3.machine_identification}
+      currentState={toPresetData(state)}
+      schemas={schemas}
+      schemaVersion={1}
+      applyPreset={applyPreset}
+      previewEntries={previewEntries}
+      defaultState={defaults}
+    />
+  );
+}