Refactor uPlot data initialization for clarity

Co-authored-by: TheBest6337 <80114847+TheBest6337@users.noreply.github.com>

electron/src/components/graph/createChart.ts

@@ -53,11 +53,11 @@ export function createChart({
   }
 
   // Build uPlot data for ALL series (including hidden ones)
-  const uPlotData: uPlot.AlignedData = [timestamps as any];
+  const uPlotData: uPlot.AlignedData = [timestamps as uPlot.AlignedData[0]];
 
   allOriginalSeries.forEach(({ series }) => {
     const [, values] = seriesToUPlotData(series.long);
-    uPlotData.push(values as any);
+    uPlotData.push(values as uPlot.AlignedData[1]);
   });
 
   // Add config lines data
@@ -70,7 +70,7 @@ export function createChart({
             line.value,
           )
         : new Array(timestamps.length).fill(line.value);
-      uPlotData.push(lineData as any);
+      uPlotData.push(lineData as uPlot.AlignedData[number]);
     }
   });
 
@@ -367,26 +367,13 @@ export function createChart({
             return ticks.map((ts) => {
               const date = new Date(ts);
 
-              if (timeRange <= 30 * 1000) {
+              if (timeRange <= 5 * 60 * 1000) {
                 return date.toLocaleTimeString(undefined, {
                   hour12: false,
                   hour: "2-digit",
                   minute: "2-digit",
                   second: "2-digit",
                 });
-              } else if (timeRange <= 5 * 60 * 1000) {
-                return date.toLocaleTimeString(undefined, {
-                  hour12: false,
-                  hour: "2-digit",
-                  minute: "2-digit",
-                  second: "2-digit",
-                });
-              } else if (timeRange <= 60 * 60 * 1000) {
-                return date.toLocaleTimeString(undefined, {
-                  hour12: false,
-                  hour: "2-digit",
-                  minute: "2-digit",
-                });
               } else if (timeRange <= 24 * 60 * 60 * 1000) {
                 return date.toLocaleTimeString(undefined, {
                   hour12: false,

flake.nix

@@ -63,7 +63,7 @@
             electron
           ];
 
-          ELECTON_SKIP_BINARY_DOWNLOAD = 1;
+          ELECTRON_SKIP_BINARY_DOWNLOAD = 1;
 
           hardeningDisable = [ "fortify" ];
 

machines/src/extruder1/emit.rs

@@ -252,7 +252,7 @@ impl ExtruderV2 {
             self.screw_speed_controller.set_target_screw_rpm(
                 self.screw_speed_controller.target_rpm,
                 AngularVelocity::new::<revolution_per_minute>(1500.0),
-                self.screw_speed_controller.motor_poles,
+                4,
             );
             self.screw_speed_controller.set_uses_rpm(uses_rpm);
         }
@@ -274,7 +274,7 @@ impl ExtruderV2 {
         self.screw_speed_controller.set_target_screw_rpm(
             AngularVelocity::new::<revolution_per_minute>(rpm),
             AngularVelocity::new::<revolution_per_minute>(1500.0),
-            self.screw_speed_controller.motor_poles,
+            4,
         );
         self.emit_state();
     }

machines/src/extruder1/new.rs

@@ -214,15 +214,12 @@ impl MachineNewTrait for ExtruderV2 {
             let target_pressure = Pressure::new::<bar>(0.0);
             let target_rpm = AngularVelocity::new::<revolution_per_minute>(0.0);
 
-            let motor_poles = 4;
-
             let screw_speed_controller = ScrewSpeedController::new(
                 inverter,
                 target_pressure,
                 target_rpm,
                 pressure_sensor,
                 FixedTransmission::new(1.0 / 34.0),
-                motor_poles,
             );
             let (sender, receiver) = smol::channel::unbounded();
 

machines/src/extruder1/screw_speed_controller.rs

@@ -9,7 +9,7 @@ use ethercat_hal::io::analog_input::AnalogInput;
 use units::angular_velocity::revolution_per_minute;
 use units::electric_current::milliampere;
 use units::f64::*;
-use units::frequency::hertz;
+use units::frequency::{cycle_per_minute, hertz};
 use units::pressure::bar;
 
 use crate::extruder1::mitsubishi_cs80::MitsubishiCS80Status;
@@ -21,7 +21,6 @@ pub struct ScrewSpeedController {
     pub pid: ClampingTimeagnosticPidController,
     pub target_pressure: Pressure,
     pub target_rpm: AngularVelocity,
-    pub motor_poles: usize,
     pub inverter: MitsubishiCS80,
     pressure_sensor: AnalogInput,
     last_update: Instant,
@@ -43,7 +42,6 @@ impl ScrewSpeedController {
         target_rpm: AngularVelocity,
         pressure_sensor: AnalogInput,
         transmission: FixedTransmission,
-        motor_poles: usize,
     ) -> Self {
         let now = Instant::now();
         Self {
@@ -64,7 +62,6 @@ impl ScrewSpeedController {
             frequency: Frequency::new::<hertz>(0.0),
             maximum_frequency: Frequency::new::<hertz>(60.0),
             minimum_frequency: Frequency::new::<hertz>(0.0),
-            motor_poles,
         }
     }
 
@@ -153,13 +150,10 @@ impl ScrewSpeedController {
 
     pub fn get_motor_status(&self) -> MotorStatus {
         let frequency = self.inverter.motor_status.frequency;
-        let motor_rpm = AngularVelocity::new::<revolution_per_minute>(
-            frequency.get::<hertz>() * 120.0 / self.motor_poles as f64,
-        );
+        let rpm =
+            AngularVelocity::new::<revolution_per_minute>(frequency.get::<cycle_per_minute>());
 
-        let screw_rpm = self
-            .transmission
-            .calculate_angular_velocity_output(motor_rpm);
+        let screw_rpm = self.transmission.calculate_angular_velocity_output(rpm);
 
         let mut status = self.inverter.motor_status;
         status.rpm = screw_rpm;

machines/src/extruder2/emit.rs

@@ -278,7 +278,7 @@ impl ExtruderV3 {
             self.screw_speed_controller.set_target_screw_rpm(
                 self.screw_speed_controller.target_rpm,
                 AngularVelocity::new::<revolution_per_minute>(3000.0),
-                self.screw_speed_controller.motor_poles,
+                2,
             );
             self.screw_speed_controller.set_uses_rpm(uses_rpm);
         }
@@ -300,7 +300,7 @@ impl ExtruderV3 {
         self.screw_speed_controller.set_target_screw_rpm(
             AngularVelocity::new::<revolution_per_minute>(rpm),
             AngularVelocity::new::<revolution_per_minute>(3000.0),
-            self.screw_speed_controller.motor_poles,
+            2,
         );
         self.emit_state();
     }

machines/src/extruder2/new.rs

@@ -213,15 +213,12 @@ impl MachineNewTrait for ExtruderV3 {
             let target_pressure = Pressure::new::<bar>(0.0);
             let target_rpm = AngularVelocity::new::<revolution_per_minute>(0.0);
 
-            let motor_poles = 2;
-
             let screw_speed_controller = ScrewSpeedController::new(
                 inverter,
                 target_pressure,
                 target_rpm,
                 pressure_sensor,
                 FixedTransmission::new(1.0 / 30.0),
-                motor_poles,
             );
             let (sender, receiver) = smol::channel::unbounded();
 

nixos/os/configuration.nix

@@ -42,7 +42,7 @@ in {
     # - CONS: Vulnerable to Spectre, Meltdown, Foreshadow, ZombieLoad, etc.
     #         Should ONLY be used in completely trusted environments
     # - Improves performance by 7-43%
-    "mitigation=off"
+    "mitigations=off"
     "intel_pstate=performance" # Intel CPU-specific performance mode (if applicable)
 
     # Memory Management

nixos/update-flake-lock.sh

@@ -30,9 +30,6 @@ docker run --rm \
     --workdir /workspace \
     nixos/nix:latest \
     sh -c "
-	whoami
-	ls -lh
-	cd /workspace
         echo 'Enabling flakes and nix-command...'
         mkdir -p ~/.config/nix
         echo 'experimental-features = nix-command flakes' > ~/.config/nix/nix.conf