timeout fixed the el3062

Co-authored-by: Oshgnacknak <osh@oshgnacknak.de>

CHANGELOG.md

@@ -1,3 +1,35 @@
+# `2.14.1`
+_26.01.2026_
+
+## Laser
+-[#1079](https://github.com/qitechgmbh/control/pull/1079) Fixed Overflowing of buffer for Graphs causing crashes
+
+# `2.14.0`
+_22.01.2026_
+
+## General 
+- [#1040](https://github.com/qitechgmbh/control/pull/1040) Added API for reading Machine Data
+
+# `2.13.0`
+_07.01.2026_
+
+## General
+- [#925](https://github.com/qitechgmbh/control/pull/925) Switch to Setup when selected machine is disconnected
+- [#937](https://github.com/qitechgmbh/control/pull/937) Added minimal Support for WAGO 
+- [#945](https://github.com/qitechgmbh/control/pull/945) Improvements for On-Screen Keyboard usage in Ethercat Setup Page
+
+## Extruder V3
+- [#930](https://github.com/qitechgmbh/control/pull/930) Added Extruder V3
+
+## Laser
+- [#924](https://github.com/qitechgmbh/control/pull/924) Roundness is now displayed as a percentage
+- [#885](https://github.com/qitechgmbh/control/pull/885) Added Min and Max Diameter
+- [#849](https://github.com/qitechgmbh/control/pull/849) Added a Warning if Filament is out of Spec
+
+## Aquapath
+- [#976](https://github.com/qitechgmbh/control/pull/976) Improved Stability
+
+
 # `2.12.0`
 _17.11.2025_
 

README.md

@@ -17,22 +17,22 @@ QiTech Control combines the modularity and reliability of standard EtherCAT term
 
 # Repo Structure
 
-Frontend
+**Frontend**
 
 - `/electron`: Frontend code for the control software built with React and Electron.
 
-Backend
+**Backend**
 
 - `/server`: Glue between Beckhoff and Electron. Implements machine logic.
 - `/ethercat-hal`: Hardware abstraction layer for Beckhoff (and possibly other EtherCat) devices and protocols.
 - `/ethercat-hal-derive`: Macros for `ethercat-hal`
 - `/control-core`: Core control logic for the server.
 
-Operating System
+**Operating System**
 
 - `/nixos`: Custom Linux with realtime kernel & preconfigured for touchscreens.
 
-Other
+**Other**
 
 - `/docs`: Documentation for the project.
 
@@ -54,115 +54,57 @@ We could combine the code of the frontend and backend using [Doxius](https://dio
 
 [Developer Documentation](./docs/developer-docs/)
 
-## Backend
+[API Documentation](https://github.com/qitechgmbh/control/blob/master/docs/rest-api.md)
 
+-> Backend
 - Rust stable 1.86^ toolchain (install via [rustup](https://rustup.rs/))
 - `rust-analyzer` extension for VSCode
 - Set your interface in `server/src/ethercat/init.rs` like `en10`
 - Connect a Beckhoff EK1100 to your interface
 - run `cd server && cargo run` to start the server (localhost:3001)
 
-## Frontend
-
+-> Frontend
 - nodejs and npm installed
 - run `cd electron && npm i && npm run start` to start the frontend
 
-# Machines
 
-| Machine Type | Version | Release Date | Description                 | Change to Previous Version                             | Vendor ID                  | Machine ID | Implemented | Docs                            |
-| ------------ | ------- | ------------ | --------------------------- | ------------------------------------------------------ | -------------------------- | ---------- | ----------- | ------------------------------- |
-| Winder       | V1      | ???          | Winding Filaments & Similar | -                                                      | 1 (Qitech Industries GmbH) | 1          | Reserved    | -                               |
-| Winder       | V2      | 2025         | Winding Filaments & Similar | Reengineered Traverse                                  | 1 (Qitech Industries GmbH) | 2          | Yes         | [](./docs/machines/winder-1.md) |
-| Extruder     | V1      | ???          | Single Screw Extruder       | -                                                      | 1 (Qitech Industries GmbH) | 3          | Reserved    | -                               |
-| Extruder     | V2      | 2025         | Single Screw Extruder       | PT100 Thermometers, Optional Additional Heating Zone 4 | 1 (Qitech Industries GmbH) | 4          | Yes         |                                 |
-| Waterway     | V1      | 2025         | Filament Water Cooling      | -                                                      | 1 (Qitech Industries GmbH) | 5          | In Progress     |                                 |
-| Laser        | V1      | ???          | Diameter Measuring Laser    | -                                                      | 1 (Qitech Industries GmbH) | 6          | Yes         |                                 |
-| Mock         | -       | ???          | Mock Machine for Testing    | -                                                      | 1 (Qitech Industries GmbH) | 7          | Yes         | -                               |
-
-# Minimal Hardware Examples
+## Minimal Hardware Examples
 
 For complete step-by-step tutorials on setting up your first hardware, including wiring diagrams and software configuration, see the [Getting Started Guide](./docs/developer-docs/getting-started.md#minimal-hardware-examples).
 
-Available examples:
-- **LED Control with EL2004** - Digital output control (simplest setup)
-- **Analog Input with EL3021** - Reading analog current measurements
+| Example            | Vendor   | Hardware      | Description                             | How-To Video | Docs                          |
+| :----------------- | :------- | :------------ | :-------------------------------------- | :----------- | :---------------------------- |
+| **Digital Input** | WAGO     | 750-402       | 4-Channel Digital Input                 | [ ]          | -                             |
+| **Digital Output** | WAGO     | 750-753       | 8-Channel Digital Output                | [ ]          | -                             |
+| **Analog Input** | WAGO     | 750-455       | 4-Channel Analog Input                  | [ ]          | -                             |
+| **Analog Output** | WAGO     | 750-553       | 4-Channel Analog Output                 | [ ]          | -                             |
+| **Serial Comms** | WAGO     | 750-652       | RS-485 Modbus Module                    | [ ]          | -                             |
+| **Stepper Drive** | WAGO     | 750-67x       | Stepper Controller                      | [ ]          | -                             |
+| **Power Supply** | WAGO     | 2787-214      | Power Supply Unit                       | [ ]          | -                             |
+| **LED Control** | Beckhoff | EL2004        | Digital output control (simplest setup) | [ ]          | [](./docs/hardware/el2004.md) |
+| **Analog Input** | Beckhoff | EL3021        | Reading analog current measurements     | [ ]          | [](./docs/hardware/el3021.md) |
 
+# QiTech Machines
 
-# More Docs
+| Machine Name      | Description                 | Machine ID | Implemented | Video                                                           | Docs                            |
+| :---------------- | :-------------------------- | :--------- | :---------- | :-------------------------------------------------------------- | :------------------------------ |
+| Winder V1         | Winding Filaments & Similar | 1          | Legacy      | [Video](https://youtu.be/4aE4cFhioKA?si=Xdj_LVnFrAYWnLm6)       | -                               |
+| Winder V2         | Winding Filaments & Similar | 2          | Yes         | [Video](https://youtu.be/f2kzh6kpQWE?si=HEYcLOaC9gWSp2Wo)       | [](./docs/machines/winder-1.md) |
+| XL Winder V1      | Large Scale Winder          | 3          | Yes         | [Video](https://youtu.be/ynI6ioWIQQY?si=4EDVKXbgIqrvGGtY)       | -                               |
+| Buffer V1         | Filament buffering system   | 4          | In Progress | [Video](https://youtu.be/VR5mEdZDPA0?si=eip7dQXU4zaXK7Ev)       | -                               |
+| Extruder V1       | Single Screw Extruder       | 5          | Legacy      | [Video](https://youtu.be/gchoG-yGczI?si=bEM4daf5eOVaU5_2)       | -                               |
+| Extruder V2       | Single Screw Extruder       | 6          | Yes         | [Video](https://youtu.be/mexRYGDNWa4?si=h7JBz_XKMwKLPenG)       |                                 |
+| Waterway V1       | Filament Water Cooling      | 7          | In Progress | [Video](https://youtu.be/_T5z1J8bl_k?si=uOC1hIQ1EAP0cHIF)       |                                 |
+| Laser V1          | Diameter Measuring Laser    | 8          | Yes         | [Video](https://youtu.be/WDM34lj4afM?si=MZzUKkHCrzH4P0aA)       |                                 |
+| 2-Axis-Laser V1   | Dual Axis Laser             | 9          | Yes         | [Video](https://youtu.be/WDM34lj4afM?si=MZzUKkHCrzH4P0aA)       | -                               |
+| Mock              | Mock Machine for Testing    | 10         | Yes         |                                                                 | -                               |
+| Extruder V3       | Single Screw Extruder       | 11         | Yes         | [Video](https://youtu.be/ipHHuPzCvn4?si=hkZ1b93rVuwDxhFD)       |                                 |
+| Mini Schredder V1 | mini plastic crusher        | 12         | Legacy      | [Video](https://youtu.be/m8NplNqdu2Q?si=x6zjDktJtpbSMSmu)       | -                               |
+| Pro Schredder V1  | large plastic crusher       | 13         | Legacy      | [Video](https://youtu.be/pSaVMqp06pU?si=y61enutRpxKscBm4)       | -                               |
+| Dryer V1          | polymer dryer               | 14         | Reserved    | [Video](https://youtu.be/6hdmUUAdZp0?si=eKOW1WlgkqTpnfdS)       | -                               |
+| Pelletizier V1    | Filament chopper            | 15         | Reserved    |                                                                 | -                               |
 
-- [x] [Architecture & Data Flow](./docs/architecture-overview.md)
+# Current Restructuring Efforts
 
-  - [x] Example Winder V2
-
-- [ ] Electron
-
-  - Folder Structure
-  - Routing with TanStack Router
-  - Design with Tailwind & Shadcn
-  - ...
-
-- [ ] Interfacing with Electron/Server
-
-  - [ ] SocketIO
-    - Machine Namespace
-    - Main Namespace
-  - [ ] REST
-    - Machine Mutations
-    - Write Device Identification
-
-- Server
-
-  - [x] [Threading](./docs/control-loop.md)
-  - [x] [Logging](./docs/logging.md)
-  - [ ] Control Loop Setup
-    - Control Loop Thread
-      - [ ] realtime
-    - Maindevice
-    - Group
-    - Extracting Device Identifications
-    - Identifying Groups
-    - Validating Machines
-    - Run Control Loop
-  - [x] [Control Loop](./docs/control-loop.md)
-  - [x] [Machine/Device Identification](./docs/identification.md)
-  - [ ] Machines
-    - When to create a new Machine?
-      - Versioning
-      - Code sharing
-    - Creating/Validating a Machine
-      - Validation
-      - Configuration
-  - [ ] Machine Implementation Guide
-    - Link: How to create a Device
-    - Link: How to create an Actor
-    - Link: How to create a Machine
-      - API (SocketIO + REST)
-      - Creation/Validation Logic
-        - Optional/Mandatory Devices
-        - Validate Devices
-      - Business Logic
-    - Link: How to create Machine Abstraction (Like Traverse/Puller/...)
-    - Forward `act` in winder.
-
-- [ ] Control Core
-
-  - [x] [Actors](./docs/actors.md)
-  - [ ] SocketIO
-    - Namespaces & Caching
-    - Joining leaving namespaces
-    - NamespaceId
-    - Caching
-      - Serverside Caching
-      - Clientside Caching
-  - [ ] REST
-
-- [x] Ethercat HAL
-
-  - [x] [Devices](./docs/devices.md)
-  - [x] [Configuration (CoE)](./docs/coe.md)
-  - [x] [IO](./docs/io.md)
-  - [x] [PDO](./docs/pdo.md)
-
-- [x] [Ethercat Basics](./docs/ethercat-basics.md)
-
-- [x] [NixOS Operating System](./docs/nixos/README.md)
+[![](https://img.youtube.com/vi/UlbnSVIhfLI/maxresdefault.jpg)](https://www.youtube.com/live/UlbnSVIhfLI?si=ZTotC5B7gd87tUim)
+*Video: Live stream of software dev meeting*

control-core/src/ethernet/mod.rs

@@ -0,0 +1,65 @@
+use std::process::Command;
+
+use anyhow::Result;
+use interfaces::Interface;
+
+pub mod modbus_tcp_discovery;
+
+/// Returns true if the given network interface is Ethernet.
+/// Prevents testing wlan,loopback and other non ethernet devices
+fn is_ethernet(interface: &str) -> std::io::Result<bool> {
+    #[cfg(target_os = "linux")]
+    {
+        let base_path = format!("/sys/class/net/{}", interface);
+        let type_path = std::path::Path::new(&base_path).join("type");
+        let iface_type = std::fs::read_to_string(&type_path)?.trim().to_string();
+        // 1 means Ethernet
+        let reports_as_ethernet = iface_type == "1";
+        // Double-check that it's not a wireless interface
+        let uevent_path = std::path::Path::new(&base_path).join("uevent");
+        let uevent = std::fs::read_to_string(&uevent_path).unwrap_or_default();
+        // If "DEVTYPE=wlan" appears, it's lying
+        let actually_wifi = uevent.contains("DEVTYPE=wlan");
+        Ok(reports_as_ethernet && !actually_wifi)
+    }
+    #[cfg(not(target_os = "linux"))]
+    return Ok(true);
+}
+
+pub fn get_interfaces() -> Result<Vec<Interface>> {
+    let vec = Interface::get_all()
+        .map_err(|e| anyhow::anyhow!("Failed to get network interfaces: {}", e))?
+        .into_iter()
+        .filter(|iface| {
+            iface.is_up()
+                && iface.is_running()
+                && !iface.is_loopback()
+                && is_ethernet(&iface.name).unwrap_or(false)
+                && !iface.name.starts_with("bridge")
+                && !iface.name.starts_with("utun")   // Exclude tunnel interfaces
+                && !iface.name.starts_with("awdl")   // Exclude Apple Wireless Direct Link
+                && !iface.name.starts_with("anpi")   // Exclude Apple Network Privacy Interface
+                && !iface.name.starts_with("llw") // Exclude Apple low-latency WLAN
+        })
+        .collect::<Vec<_>>();
+    Ok(vec)
+}
+
+/// Sets a network interface to unmanaged by NetworkManager.
+/// Returns true if the command succeeded.
+pub fn set_interface_managed(interface: &str, managed: bool) -> bool {
+    let managed_str = match managed {
+        true => "yes",
+        false => "no",
+    };
+    tracing::info!(
+        "set_interface_managed for {} managed was set to: {}",
+        interface,
+        managed_str
+    );
+    let status = Command::new("nmcli")
+        .args(["dev", "set", interface, "managed", managed_str])
+        .status();
+
+    matches!(status, Ok(s) if s.success())
+}

control-core/src/ethernet/modbus_tcp_discovery.rs

@@ -0,0 +1,78 @@
+use crate::ethernet::get_interfaces;
+use crate::{futures::FutureIteratorExt, modbus::tcp::ModbusTcpDevice};
+use anyhow::{Result, bail};
+use interfaces::Interface;
+use std::cmp::min;
+use std::net::{IpAddr, Ipv4Addr, SocketAddr};
+
+pub struct ModbusTcpProbe {
+    pub addr: SocketAddr,
+    pub serial: u16,
+}
+
+pub async fn probe_modbus_tcp() -> Vec<ModbusTcpProbe> {
+    let interfaces = match get_interfaces() {
+        Ok(x) => x,
+        Err(_) => return vec![],
+    };
+
+    interfaces
+        .into_iter()
+        .map(probe_modbus_tcp_addresses)
+        .join_all()
+        .await
+        .into_iter()
+        .flatten()
+        .collect()
+}
+
+async fn probe_modbus_tcp_addresses(interface: Interface) -> Vec<ModbusTcpProbe> {
+    let out: Vec<ModbusTcpProbe> = interface
+        .addresses
+        .iter()
+        .filter_map(|addr| {
+            let a = addr.addr.map(|a| a.ip());
+            let m = addr.mask.map(|a| a.ip());
+
+            match (a, m) {
+                (Some(IpAddr::V4(addr)), Some(IpAddr::V4(mask))) => Some((addr, mask)),
+                _ => None,
+            }
+        })
+        .flat_map(|(addr, mask)| {
+            let a = u32::from(addr);
+            let m = u32::from(mask);
+            let network = a & m;
+
+            let prefix = min(24, m.count_ones()); // mask → prefix length
+            let size = 1u32 << (32 - prefix); // number of addresses
+
+            (0..size).map(move |i| SocketAddr::new(Ipv4Addr::from(network + i).into(), 502))
+        })
+        .map(|addr| smol::spawn(ping_modbus_device(addr)))
+        .join_all()
+        .await
+        .into_iter()
+        .filter_map(|x| x.ok())
+        .collect();
+
+    out
+}
+
+async fn ping_modbus_device(addr: SocketAddr) -> Result<ModbusTcpProbe> {
+    let mut device = ModbusTcpDevice::new(addr).await?;
+
+    let module_number1 = device.get_u32(0x2).await?;
+    let module_number2 = device.get_u32(0x4).await?;
+
+    if module_number1 != 0x2787_2144 || module_number2 != 0x0000_0000 {
+        bail!("Unknown modbus tcp device!");
+    }
+
+    let serial = device.get_u32(0x000A).await?;
+
+    Ok(ModbusTcpProbe {
+        addr,
+        serial: serial as u16,
+    })
+}

control-core/src/futures.rs

@@ -0,0 +1,26 @@
+use core::future::Future;
+
+// Extension trait for iterators of futures
+pub trait FutureIteratorExt<F>: Iterator<Item = F> + Sized
+where
+    F: Future,
+{
+    /// Await all futures and return their outputs
+    fn join_all(self) -> impl Future<Output = Vec<F::Output>>;
+}
+
+impl<I, F> FutureIteratorExt<F> for I
+where
+    I: Iterator<Item = F> + Sized,
+    F: Future,
+{
+    async fn join_all(self) -> Vec<F::Output> {
+        let mut out = Vec::new();
+
+        for fut in self {
+            out.push(fut.await);
+        }
+
+        out
+    }
+}

control-core/src/lib.rs

@@ -2,6 +2,8 @@ pub mod controllers;
 pub mod converters;
 pub mod downcast;
 pub mod ethercat;
+pub mod ethernet;
+pub mod futures;
 pub mod helpers;
 pub mod irq_handling;
 pub mod modbus;

control-core/src/modbus/mod.rs

@@ -1,4 +1,5 @@
 pub mod modbus_serial_interface;
+pub mod tcp;
 
 use anyhow::Error;
 use crc::{CRC_16_MODBUS, Crc};

control-core/src/modbus/tcp.rs

@@ -0,0 +1,263 @@
+use std::fmt::Debug;
+use std::io::ErrorKind;
+use std::net::SocketAddr;
+use std::time::Duration;
+
+use anyhow::Context;
+use anyhow::Result;
+use anyhow::bail;
+use smol::Timer;
+use smol::future::FutureExt;
+use smol::io;
+use smol::io::AsyncReadExt;
+use smol::io::AsyncWriteExt;
+use smol::net::TcpStream;
+
+const PROTOCOL_ID: u16 = 0;
+const UNIT_ID: u8 = 0;
+const READ_HOLDING_FUNCTION_CODE: u8 = 3;
+const WRITE_HOLDING_FUNCTION_CODE: u8 = 16;
+const READ_HOLDING_LENGTH: u16 = 6; // Unit ID 00 + Func Code 03 + Start Address XXXX + Quantity XXXX = 6 bytes
+const WRITE_HOLDING_LENGTH_WITHOUT_DATA: u16 = 7; // Unit ID 00 + Func Code 16 + Start Address XXXX + Quantity XXXX + Num Data Bytes XX = 7 bytes
+
+struct Packet {
+    buf: Vec<u8>,
+}
+
+impl Packet {
+    pub const fn new() -> Self {
+        Self { buf: Vec::new() }
+    }
+
+    pub fn add_u8(&mut self, x: u8) {
+        self.buf.push(x);
+    }
+
+    pub fn add_u16(&mut self, x: u16) {
+        let buf = x.to_be_bytes();
+        self.buf.push(buf[0]);
+        self.buf.push(buf[1]);
+    }
+
+    pub fn as_bytes(&self) -> &[u8] {
+        &self.buf
+    }
+}
+
+pub struct ModbusTcpDevice {
+    stream: TcpStream,
+    transactions: u16,
+}
+
+impl Debug for ModbusTcpDevice {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        match self.stream.peer_addr() {
+            Ok(addr) => write!(f, "ModbusTcpDevice({:?})", addr),
+            Err(_) => std::fmt::Result::Err(std::fmt::Error),
+        }
+    }
+}
+
+impl ModbusTcpDevice {
+    pub async fn new(addr: SocketAddr) -> Result<Self> {
+        let timeout = async {
+            Timer::after(Duration::from_millis(10)).await;
+            Err(io::Error::from(ErrorKind::TimedOut))
+        };
+
+        let stream = TcpStream::connect(addr)
+            .or(timeout)
+            .await
+            .context("Could not connect to modbus device!")?;
+
+        Ok(Self {
+            stream,
+            transactions: 0,
+        })
+    }
+
+    async fn read_and_check_responce_header(&mut self, func_code: u8) -> Result<()> {
+        if self.read_u16().await? != self.transactions {
+            bail!("Modbus device sent unexpected transaction id!");
+        }
+
+        if self.read_u16().await? != PROTOCOL_ID {
+            bail!("Modbus device sent unexpected protocol id!");
+        }
+
+        let length = self.read_u16().await?;
+        if length < 2 {
+            bail!("Modbus device will send too few bytes to understand the response!");
+        }
+
+        if self.read_u8().await? != UNIT_ID {
+            bail!("Modbus device sent unexpected unit id!");
+        }
+
+        let func_code_res = self.read_u8().await?;
+        if func_code != func_code_res {
+            let error_code = self.read_u8().await?;
+            bail!(
+                "Modbus device sent unexpected function code 0x{:x}! It probably encountered an error. Error code: 0x{:x}",
+                func_code_res,
+                error_code
+            );
+        }
+
+        Ok(())
+    }
+
+    async fn send_read_holding_request(&mut self, addr: u16, count: u16) -> Result<u16> {
+        let mut packet = Packet::new();
+
+        self.transactions += 1;
+        packet.add_u16(self.transactions);
+        packet.add_u16(PROTOCOL_ID);
+        packet.add_u16(READ_HOLDING_LENGTH);
+
+        packet.add_u8(UNIT_ID);
+        packet.add_u8(READ_HOLDING_FUNCTION_CODE);
+
+        packet.add_u16(addr);
+        packet.add_u16(count);
+
+        self.send(packet).await?;
+        self.read_and_check_responce_header(READ_HOLDING_FUNCTION_CODE)
+            .await?;
+
+        let num_data_bytes = self.read_u8().await? as u16;
+        if count * 2 != num_data_bytes {
+            bail!(
+                "Modbus device wants to send only a portion of the requested range - UNIMPLEMENTED!"
+            );
+        }
+
+        Ok(num_data_bytes)
+    }
+
+    pub async fn get_holding_registers(&mut self, addr: u16, count: u16) -> Result<Vec<u16>> {
+        self.send_read_holding_request(addr, count).await?;
+
+        let mut res: Vec<u16> = Vec::new();
+        while res.len() < count as usize {
+            res.push(self.read_u16().await?);
+        }
+
+        Ok(res)
+    }
+
+    pub async fn set_holding_registers(&mut self, addr: u16, values: &[u16]) -> Result<()> {
+        let count = values.len();
+        let num_bytes = count * 2;
+        assert!(
+            count <= 128,
+            "Cannot send that many bytes to modbus device in one go! Trying to send {} bytes of data.",
+            num_bytes
+        );
+
+        let mut packet = Packet::new();
+
+        self.transactions += 1;
+        packet.add_u16(self.transactions);
+        packet.add_u16(PROTOCOL_ID);
+        packet.add_u16(WRITE_HOLDING_LENGTH_WITHOUT_DATA + num_bytes as u16);
+
+        packet.add_u8(UNIT_ID);
+        packet.add_u8(WRITE_HOLDING_FUNCTION_CODE);
+
+        packet.add_u16(addr);
+        packet.add_u16(count as u16);
+
+        packet.add_u8(num_bytes as u8);
+
+        for value in values {
+            packet.add_u16(value.to_owned());
+        }
+
+        self.send(packet).await?;
+        self.read_and_check_responce_header(WRITE_HOLDING_FUNCTION_CODE)
+            .await?;
+
+        if self.read_u16().await? != addr {
+            bail!("Modbus device wrote to wrong register address!");
+        }
+
+        if self.read_u16().await? != count as u16 {
+            bail!("Modbus device wrote wrong number of registers!");
+        }
+
+        Ok(())
+    }
+
+    pub async fn get_string<const N: usize>(&mut self, addr: u16) -> Result<String> {
+        assert!(N % 2 == 0, "Strings are always of even length!");
+        assert!(N <= 256, "Cannot read long strings in a single swoop!");
+        let count = N / 2;
+
+        self.send_read_holding_request(addr, count as u16).await?;
+        let buf = self.read_bytes::<N>().await?;
+
+        let s = String::from_utf8_lossy(&buf);
+        let s = match s.split_once('\0') {
+            None => s.to_string(),
+            Some((l, _)) => l.to_string(),
+        };
+
+        Ok(s)
+    }
+
+    pub async fn set_string<const N: usize>(&mut self, _addr: u16, s: &str) -> Result<()> {
+        assert!(s.len() <= N, "String is too long to fit!");
+
+        todo!()
+    }
+
+    pub async fn get_u16(&mut self, addr: u16) -> Result<u16> {
+        let length = self.send_read_holding_request(addr, 1).await?;
+        assert_eq!(
+            length, 2,
+            "Expected modbus device to send exactly 2 bytes of data!"
+        );
+
+        self.read_u16().await
+    }
+
+    pub async fn get_u32(&mut self, addr: u16) -> Result<u32> {
+        let length = self.send_read_holding_request(addr, 2).await?;
+        assert_eq!(
+            length, 4,
+            "Expected modbus device to send exactly 4 bytes of data!"
+        );
+
+        let buf = self.read_bytes::<4>().await?;
+        Ok(u32::from_be_bytes(buf))
+    }
+
+    // We have to send the request in a single packet,
+    // otherwise the device may fail to respond correctly.
+    async fn send(&mut self, packet: Packet) -> Result<()> {
+        self.stream
+            .write_all(packet.as_bytes())
+            .await
+            .context("Could write to modbus device!")
+    }
+
+    async fn read_u8(&mut self) -> Result<u8> {
+        let buf = self.read_bytes::<1>().await?;
+        Ok(u8::from_be_bytes(buf))
+    }
+
+    async fn read_u16(&mut self) -> Result<u16> {
+        let buf = self.read_bytes::<2>().await?;
+        Ok(u16::from_be_bytes(buf))
+    }
+
+    async fn read_bytes<const N: usize>(&mut self) -> Result<[u8; N]> {
+        let mut buf = [0; N];
+        self.stream
+            .read_exact(&mut buf)
+            .await
+            .context("Could not read from modbus device!")?;
+        Ok(buf)
+    }
+}

docs/developer-docs/getting-started.md

@@ -91,3 +91,83 @@ To get started with actual hardware, check out these step-by-step tutorials:
 - **[Analog Input with EL3021](./minimal-example-el3021.md)** - Reading analog current measurements
 
 These examples provide complete hardware wiring diagrams and software setup instructions.
+
+
+# More Docs 
+
+- [x] [Architecture & Data Flow](./docs/architecture-overview.md)
+
+  - [x] Example Winder V2
+
+- [ ] Electron
+
+  - Folder Structure
+  - Routing with TanStack Router
+  - Design with Tailwind & Shadcn
+  - ...
+
+- [ ] Interfacing with Electron/Server
+
+  - [ ] SocketIO
+    - Machine Namespace
+    - Main Namespace
+  - [ ] REST
+    - Machine Mutations
+    - Write Device Identification
+
+- Server
+
+  - [x] [Threading](./docs/control-loop.md)
+  - [x] [Logging](./docs/logging.md)
+  - [ ] Control Loop Setup
+    - Control Loop Thread
+      - [ ] realtime
+    - Maindevice
+    - Group
+    - Extracting Device Identifications
+    - Identifying Groups
+    - Validating Machines
+    - Run Control Loop
+  - [x] [Control Loop](./docs/control-loop.md)
+  - [x] [Machine/Device Identification](./docs/identification.md)
+  - [ ] Machines
+    - When to create a new Machine?
+      - Versioning
+      - Code sharing
+    - Creating/Validating a Machine
+      - Validation
+      - Configuration
+  - [ ] Machine Implementation Guide
+    - Link: How to create a Device
+    - Link: How to create an Actor
+    - Link: How to create a Machine
+      - API (SocketIO + REST)
+      - Creation/Validation Logic
+        - Optional/Mandatory Devices
+        - Validate Devices
+      - Business Logic
+    - Link: How to create Machine Abstraction (Like Traverse/Puller/...)
+    - Forward `act` in winder.
+
+- [ ] Control Core
+
+  - [x] [Actors](./docs/actors.md)
+  - [ ] SocketIO
+    - Namespaces & Caching
+    - Joining leaving namespaces
+    - NamespaceId
+    - Caching
+      - Serverside Caching
+      - Clientside Caching
+  - [ ] REST
+
+- [x] Ethercat HAL
+
+  - [x] [Devices](./docs/devices.md)
+  - [x] [Configuration (CoE)](./docs/coe.md)
+  - [x] [IO](./docs/io.md)
+  - [x] [PDO](./docs/pdo.md)
+
+- [x] [Ethercat Basics](./docs/ethercat-basics.md)
+
+- [x] [NixOS Operating System](./docs/nixos/README.md)

docs/developer-docs/minimal-example-wago-750-455.md

@@ -0,0 +1,196 @@
+# Minimal Example — Analog Input Wago 750-455
+
+## Table of Contents
+1. [Introduction](#1-introduction)
+2. [Requirements](#2-requirements)
+3. [Hardware Setup](#3-hardware-setup)
+4. [Software Setup](#4-software-setup)
+5. [Demo](#5-demo)
+6. [References](#6-references)
+
+## 1. Introduction
+The Wago 750-455 Analog Input example demonstrates how to measure analog current on a **Wago 750-455 EtherCAT module** using the QiTech machine framework. This module provides 4 independent analog input channels that can read 4-20mA signals.
+
+## 2. Requirements
+
+### Hardware
+- **Wago 750-354 EtherCAT Coupler**
+- **Wago 750-602 Power Supply** (24V VDC)
+- **Wago 750-455 EtherCAT Module** (4-channel analog input, 4-20mA)
+- **Wago 750-600 End Module** 
+- **24 V DC power supply** for the Wago system
+- **Adjustable DC power supply** (or any other means of producing 4-20mA DC @ <10V)
+- Jumper / bridge wires (0.5–1.5 mm² recommended)
+- A **Linux PC** (Ubuntu/Debian recommended)
+- Standard Ethernet cable
+- Flat screwdriver
+
+### Software
+*(Installation steps in Section 4)*
+- Rust toolchain
+- Node.js + npm
+- Git
+- QiTech Control repository
+- EtherCAT HAL (included inside repo)
+
+## 3. Hardware Setup
+
+### 3.1 Overview
+The Wago 750-455 is a 4-channel analog input module that measures current signals in the 4-20mA range. Each channel has its own input terminals and can operate independently.
+
+#### ⚠️ Safety Warning
+Always disconnect power before wiring.
+Working on live EtherCAT modules can cause serious damage or electrical shock.
+
+### 3.2 Wiring Procedure
+
+#### 3.2.1 Safe Wiring (Wago Spring Clamp)
+1. Insert a screwdriver **straight** into the square release hole.
+2. Insert the stripped wire into the round opening.
+3. Remove the screwdriver — the spring clamp locks the wire.
+
+![](../assets/wiring.png)
+
+---
+
+### 3.3 Wago 750-455 Module Wiring
+
+The Wago 750-455 has 4 analog input channels. Each channel requires two terminals:
+
+**Channel 1 (AI1):**
+- Terminal 1: ⊕ (Positive input)
+- Terminal 2: ⊖ (Negative input/Ground)
+
+**Channel 2 (AI2):**
+- Terminal 3: ⊕ (Positive input)
+- Terminal 4: ⊖ (Negative input/Ground)
+
+**Channel 3 (AI3):**
+- Terminal 5: ⊕ (Positive input)
+- Terminal 6: ⊖ (Negative input/Ground)
+
+**Channel 4 (AI4):**
+- Terminal 7: ⊕ (Positive input)
+- Terminal 8: ⊖ (Negative input/Ground)
+
+For this minimal example, we'll connect at least one channel to an adjustable power supply:
+
+1. Wire adjustable power supply ⊕ to **Terminal 1** (Channel 1 positive)
+2. Wire adjustable power supply ⊖ to **Terminal 2** (Channel 1 negative)
+
+*Repeat for additional channels as needed.*
+
+---
+
+### 3.4 Wago I/O System Integration
+
+The Wago 750-455 module plugs into a Wago fieldbus system. Consult your specific Wago controller/coupler documentation for:
+- Power supply requirements
+- Network configuration
+- Module placement in the I/O rack
+
+The module automatically connects to the backplane for EtherCAT communication and power.
+
+---
+
+### 3.5 Power & Ethernet
+
+#### Power
+Ensure your Wago system has adequate 24V DC power connected per manufacturer specifications.
+
+#### Ethernet
+Connect your PC to the Wago controller/coupler using a standard Ethernet cable.
+
+---
+
+## 4. Software Setup
+
+### 4.1 Installing on Ubuntu/Debian
+
+Paste this into your terminal:
+
+```bash
+# Press Enter when prompted
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+
+sudo apt update
+sudo apt install -y npm nodejs git
+
+git clone git@github.com:qitechgmbh/control.git
+cd control/electron
+npm install
+```
+
+### 4.2 Running the Backend
+
+```bash
+./cargo_run_linux.sh
+```
+
+This script:
+- Builds the backend
+- Grants required system capabilities (raw sockets)
+- Starts EtherCAT communication
+
+Ensure the Wago controller is connected and powered.
+
+### 4.3 Running the Frontend
+
+```bash
+cd electron
+npm run start
+```
+
+This launches the QiTech Control dashboard.
+
+---
+
+## 5. Demo
+
+### 5.1 Assigning Devices in the Dashboard
+
+Once both backend and frontend are running:
+
+1. Navigate to **Setup → EtherCAT** page
+2. You should see your Wago controller and the 750-455 module listed
+3. Select the Device called 750-354 and assign the Wago AI Test V1 Machine, set the Serial to 1 and set the device role to 0 (Wago Bus Coupler)
+4. Press write thn restart the backend to load the changes
+
+### 5.2 Testing Analog Input
+
+1. Set your adjustable power supply to output a current in the 4-20mA range
+2. In the dashboard, navigate to the monitoring view
+3. Observe the analog input value for the connected channel(s)
+
+### 5.3 Channel Specifications
+
+The Wago 750-455 provides:
+- **Input Range:** 4-20mA
+- **Wiring Error Detection:** Built-in detection for open/short circuit conditions
+- **4 Independent Channels:** Each can be read separately
+
+### 5.4 Error Detection
+
+The module includes wiring error detection. If you see a wiring error flag:
+- Check that your current source is within the 4-20mA range
+- Verify all wire connections are secure
+- Ensure the current loop is properly closed
+
+---
+
+## 6. References
+
+### Wago Documentation
+- [Wago 750-455 Product Page](https://www.wago.com/de-en/io-systems/4-channel-analog-input/p/750-455)
+- Wago I/O System manual
+- EtherCAT configuration guide for Wago systems
+
+### QiTech Control
+- [Architecture Overview](../architecture-overview.md)
+- [EtherCAT Basics](../ethercat-basics.md)
+- [Device Documentation](../devices.md)
+- [Getting Started Guide](getting-started.md)
+
+### Related Examples
+- [Minimal Example — EL3021](minimal-example-el3021.md) (Single channel analog input)
+- [Minimal Example — EL2004](minimal-example-el2004.md) (Digital output)

docs/developer-docs/minimal-example-wago750-402.md

@@ -0,0 +1,240 @@
+# Minimal Example — LED Control on the WAGO750-402
+A complete hardware + software walkthrough
+
+---
+
+## Table of Contents
+1. [Introduction](#1-introduction)
+2. [Requirements](#2-requirements)
+3. [Hardware Setup](#3-hardware-setup)
+4. [Software Setup](#4-software-setup)
+5. [Demo](#5-demo)
+6. [References](#6-references)
+
+---
+
+## 1. Introduction
+The WAGO 750-402 Display Example is a minimal demonstation showing how to display the digital inputs on a WAGO 750-402 EtherCAT terminal using the QiTech machine framework.
+It represents the simplest possible hardware interaction in the system:
+Displaying the Digital Inputs using the QiTech Control Dashboard.
+## 2. Requirements
+
+### Hardware
+- WAGO **2787-2144 EtherCAT**
+- WAGO **750-354 EtherCAT Coupler**
+- WAGO **750-602 EtherCAT Power Terminal**
+- WAGO **750-402 EtherCAT Terminal** (4.channle digital input)
+- WAGO **750-600 EtherCAT Endmodule**
+- WAGO **852-1322 Ethernet-Switch**
+- **24V DC Lab power supply**(AC/DC adapter)
+- A **Linux PC** (Ubuntu/Debian recommended)  
+- Standard Ethernet cable  
+- Flat screwdriver  
+
+
+
+---
+
+### Software
+*(Installation steps in Section 4)*
+
+- Rust tollchain
+- Node-js + npm
+- Git
+- QiTech Control repository
+- EtherCAT HAL *(include inside repo)*
+
+## 3. Hardware Setup
+
+### 3.1 Schematic
+
+![](../assets/WAGO750_402_schematic.png)
+
+---
+
+#### ⚠️ Safety Warning  
+Always disconnect power before wiring.  
+Working on live EtherCAT terminals can cause serious damage or electrical shock.
+
+### 3.2.1 Safe Wiring Procedure (Beckhoff Recommended)
+1. Insert a screwdriver **straight** into the square release hole.  
+2. Insert the stripped wire into the round opening.  
+3. Remove the screwdriver — the spring clamp locks the wire.
+
+![](../assets/wiring.png)
+
+---
+
+### 3.2.2 Wiring Steps (Used in This Example)
+
+We supply power to the other devices by using the **750-602 EtherCAT Power Terminal**
+
+Perform the following wiring on the Ethernet-Switch:
+
+1. Red wire (+24V) → PWR+
+2. Black wire (0V) → RPS-
+ 
+#### **Figure 1 —**
+<img src="../assets/WAGO750_402_switch.JPG" width="400">
+
+---
+
+### 3.3 WAGO Wiring the Coupler
+
+Wire the **750-354 EtherCAT Coupler** to the power supply
+1. red wire (+24V)
+2. yellow (0V)
+
+#### **Figure 2 —**
+<img src="../assets/WAGO750_402_coupler.JPG" width="400">
+
+---
+
+### 3.4 750-602 EtherCAT Power Terminal Integration
+
+Slide the **750-602 EtherCAT Power Terminal** onto the **right side of the 750-354 Coupler** until it locks.
+
+Next We need to wire the EtherCat Power Terminal
+
+Perform the next wiring Steps:
+
+1. Green wire (Ground) → **Terminal4**
+2. Red wire (+24V) from  **750-602 EtherCAT Power Terminal** → **Terminal 2**
+3. Black wire(0V) from **750-602 EtherCAT Power Terminal** → **Terminal 3**
+4. Red wire (+24V) from **750-354 EtherCAT Coupler** → **Terminal 6**
+5. Yellow wire (0V) from **750-354 EtherCAT Coupler** → **Terminal 7**
+
+#### **Figure 3 — Wiring**
+<img src="../assets/WAGO750_402_power_terminal.JPG" width="400">
+
+---
+
+## 3.5 750-402 EtherCAT Terminal Integration
+
+Slide the **750-402 EtherCAT Terminal** onto to **right side of the 750-602 EtherCAT Power Terminal** until it locks.
+
+Wire from the **24V DC Lab Adapter** → **Terminal 1**
+
+#### **Figure 4 — Wiring**
+<img src="../assets/WAGO750_402_terminal.JPG" width="400">
+
+## 3.6 750-600 Final Assemly
+
+Slide the **750-600 EtherCAT Endmodule** onto to **right side of the 7750-402 EtherCAT Terminal** until it locks.
+
+No wiring is required
+
+#### **Figure 5 — 750-402 + 750-600 Connected**
+<img src="../assets/WAGO750_402_end_modul.JPG" width="400">
+
+## 3.7 Power & Etherneet 
+
+### Power
+
+Connect the 2787-2144 power supply to the power outlet
+
+### Ehternet
+
+Use a standard LAN cable to connect to your PC → **852-1322 Ethernet-Switch** 
+
+And another from **852-1322 Ethernet-Switch** → **750-354 EtherCAT Coupler**
+
+#### **Figure 6 — Ethernet**
+<img src="../assets/WAGO750_402_ethernet.JPG" width="400">
+
+## 4. Software Setup
+
+### 4.1 Installing on Ubuntu/Debian
+Paste this into your terminal:
+
+```bash
+# Press Enter when prompted
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+
+sudo apt update
+sudo apt install -y npm nodejs git
+
+git clone git@github.com:qitechgmbh/control.git
+cd control/electron
+npm install
+```
+### 4.2 Running the Backend
+```bash
+./cargo_run_linux.sh
+```
+This script:
+
+- Builds the backend
+
+- Grants required system capabilities (raw sockets)
+
+- Starts EtherCAT communication
+
+Ensure the WAGO750-402 is connected.
+
+### 4.3 Running the Frontend
+```bash
+cd electron
+npm run start
+```
+
+This launches the QiTech Control dashboard.
+
+## 5. Demo
+
+### 5.1 Assigning Devices in the Dashboard
+
+Once the backend + frontend are running, you should see:
+
+- WAGO750-354 (Coupler)
+
+- wago module (Digital Input Terminal)
+
+![](../assets/WAGO750_402_discovery.png)
+
+Steps:
+
+- Click Assign on the wago module
+
+- Select Digital Input Machine V1
+ 
+![](../assets/WAGO750_402_setmachine.png)
+
+
+- Enter a serial number except for 0
+
+![](../assets/WAGO750_402_serserial.png)
+
+- Click Write
+
+### 5.2 Diyplaying LED
+Navigate to:
+
+Machines → DigitalInputMachine
+
+![](../assets/WAGO750_402_machinedetected.png)
+
+You will see this interface:
+
+![](../assets/WAGO750_402_machinecontrol1.png)
+
+Now you can apply a Voltage of the Range of 15V-30V (+24V recommended) from the DC lab power supply to the Terminal.
+The Terminal can read the digital input, which is signaled by the LED on the Terminal and should be displayed in the Control software.
+
+In our example it lights up the first LED
+
+![](../assets/WAGO750_402_machinecontrol2.png)
+
+## 6. References
+This guide incorporates information from official WAGO documentation.
+All diagrams, product names, and figures belong to Beckhoff Automation GmbH & Co. KG and are used here solely for educational purposes.
+
+Referenced Manuals
+
+[WAGO 750-402 Documentation](https://www.wago.com/de/io-systeme/4-kanal-digitaleingang/p/750-402#downloads)
+
+[WAGO 750-354 Documentation](https://www.wago.com/de/io-systeme/feldbuskoppler-ethercat/p/750-354#details)
+
+[WAGO 750-602 Documentation](https://www.wago.com/de/io-systeme/potentialeinspeisung/p/750-602#details)
+
+[WAGO 750-354 Documentation](https://www.wago.com/de/io-systeme/endmodul/p/750-600#details)

docs/machines/README.md

@@ -1,40 +0,0 @@
-# Machine Documentation
-
-This directory contains documentation for QiTech machines.
-
-## Structure
-
-```
-docs/machines/
-├── manuals/          # Machine operation manuals (markdown files)
-│   ├── extruder.md
-│   ├── winder.md
-│   ├── laser.md
-│   └── mock.md
-├── extruder/         # Machine-specific documentation
-├── winder/
-├── laser/
-└── mock/
-```
-
-## Images
-
-All manual images are stored in: **`electron/public/images/manuals/[machine-name]/`**
-
-For example:
-- Winder images: `electron/public/images/manuals/winder/`
-- Extruder images: `electron/public/images/manuals/extruder/`
-- Laser images: `electron/public/images/manuals/laser/`
-
-### Image References in Manuals
-
-When referencing images in manual markdown files (located in `docs/machines/manuals/`), use relative paths:
-
-```markdown
-![Image description](../../../../electron/public/images/manuals/[machine-name]/image.png)
-```
-
-## Adding Images
-
-1. Place images in: `electron/public/images/manuals/[machine-name]/`
-2. Reference in markdown: `../../../../electron/public/images/manuals/[machine-name]/your-image.png`

docs/nixos/README.md

@@ -10,7 +10,7 @@ This is why we chose nixos
 # How we do updates
 1. The user selects a version (commit/branch/tag) of the software they want to install
 2. The repo is cloned to the local machine
-3. the `installInfo.nix` is created and commited locally. It contains infos like the commit hash, branch, tag, timestamp etc. These are later available as environment variables `QITECH_OS...`
+3. Information like the commit hash, branch, tag, timestamp etc. is passed to the nix build process as environment variables `QITECH_OS...`
 4. The `nixos-switch` command is run. After rebuilding & compiling the software the system reboots.
    - The nixos-switch command does the following:
    1. The system is built with the new configuration
@@ -21,4 +21,4 @@ This is why we chose nixos
 
 # More Docs
 - [Implementation Details](./details.md)
-- [Fresh Installation Quick Start guide](./quick-start.md)
+- [Fresh Installation Quick Start guide](./quick-start.md)

docs/rest-api.md

@@ -0,0 +1,241 @@
+# REST API `/api/v2`
+
+The Qitech Control Panel exposes a small HTTP interface for discovering machines and reading their current values. All examples below assume you are connected to the panel’s Ethernet subnet and talk directly to the panel at:
+
+- **Base URL:** `http://10.10.10.1:3001`
+
+> **Schema note:** This documentation intentionally stays light on field details beyond what is shown in the examples. For the exact datatypes and complete payload shapes, refer to the corresponding Rust types (linked below).
+
+---
+
+## Authentication
+
+The panel does **not** perform HTTP authentication. The expected security model is **network-level isolation**: anything that can send packets to the panel’s Ethernet interface is treated as trusted. This matches common security assumptions in EtherCAT-style control networks. It is therefore suggested to run the entire production line in isolated operation.
+
+The panel is configured to administer its own subnet `10.10.10.0/24` via DHCP, while Wi-Fi can be used for upstream internet connectivity. To let the outside world communicate with the production line, a router should be placed at the network bondary bridging the production line's subnet and the rest of the network. The router can run in **client/bridge mode** on the line's subnet and expose the panel's API via **port forwading** or through a **reverse proxy** where one can add authentication, logging, rate limiting, etc.
+
+The following graphic depicts the suggested network topology for a single production line. Many lines could potentially share the same router.
+
+<p align="center">
+  <img width="769" height="528" alt="Suggested network topology" src="./assets/subnet.png" />
+</p>
+
+If DNS is available on the subnet, you may be able to resolve `qitech.control`; otherwise use the static address `10.10.10.1`.
+
+---
+
+## List machines `GET /api/v2/machine`
+
+Returns the set of machines currently known/connected to the panel.
+
+Machines are identified by:
+
+- `slug`: the machine type / model identifier (string)
+- `serial`: the specific machine instance identifier (int)
+
+Each machine also includes a `legacy_id` to support older **v1** workflows. If a machine reports an issue, the `error` field may be present and non-null (containing an error message).
+
+### Example request
+
+```bash
+curl -X GET "http://10.10.10.1:3001/api/v2/machine"
+```
+
+### Example response
+
+```json
+{
+  "machines": [
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 7
+        },
+        "serial": 57922
+      },
+      "serial": 57922,
+      "vendor": "QiTech",
+      "slug": "mock",
+      "error": null
+    },
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 4
+        },
+        "serial": 57922
+      },
+      "serial": 57922,
+      "vendor": "QiTech",
+      "slug": "extruder_v1",
+      "error": null
+    },
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 2
+        },
+        "serial": 57922
+      },
+      "serial": 57922,
+      "vendor": "QiTech",
+      "slug": "winder_v1",
+      "error": null
+    },
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 10
+        },
+        "serial": 48879
+      },
+      "serial": 48879,
+      "vendor": "QiTech",
+      "slug": "wago_power_v1",
+      "error": null
+    }
+  ]
+}
+```
+
+---
+
+## Get current values `GET /api/v2/machine/<slug>/<serial>`
+
+Returns all currently known values for a single machine.
+
+Values are categorized into two groups:
+
+- **State**: requested/commanded values (these typically change only after a state-change request, or if another controller updates them)
+- **Live Values**: measured/observed values coming from the machine and potentially changing quickly
+
+This REST endpoint returns **only the current snapshot**, not a stream of live values.
+To receive continuous updates (via WebSockets), subscribe to the machine namespace (see **WebSockets** below).
+
+### Example request (mock machine)
+
+```bash
+curl -X GET "http://10.10.10.1:3001/api/v2/machine/mock/57922"
+```
+
+### Example response
+
+```json
+{
+  "machine": {
+    "legacy_id": {
+      "machine_identification": {
+        "vendor": 1,
+        "machine": 7
+      },
+      "serial": 57922
+    },
+    "serial": 57922,
+    "vendor": "QiTech",
+    "slug": "mock",
+    "error": null
+  },
+  "state": {
+    "frequency1": 100.0,
+    "frequency2": 200.0,
+    "frequency3": 500.0,
+    "is_default_state": false,
+    "mode_state": {
+      "mode": "Running"
+    }
+  },
+  "live_values": {
+    "amplitude1": -0.03438523433309566,
+    "amplitude2": -0.06872980145477608,
+    "amplitude3": -0.1711138370170743,
+    "amplitude_sum": -0.27422887280494607
+  }
+}
+```
+
+---
+
+## Change machine state `POST /api/v1/machine/<slug>/<serial>`
+
+State changes are submitted as **mutations**. The mutation payload is defined per machine type in Rust. Conceptually, each item in the mutation list represents a setter-style operation that is applied by the real-time control loop.
+
+The API does **not** return the newly-applied state in the POST response. The panel runs a real-time loop and generally won’t block waiting for the physical system to converge. Instead:
+
+- Submit the mutation via `POST`
+- Poll `GET /api/v2/machine/<slug>/<serial>` to observe the updated state and/or any reported errors
+
+### Example request (mock machine)
+
+```bash
+curl -X POST \
+  -d  \
+  -H "Content-Type: application/json" \
+  "http://10.10.10.1:3001/api/v1/machine/mock/57922"
+```
+
+### Example response
+
+```json
+null
+```
+
+---
+
+## WebSockets
+
+For continuous updates, subscribe to a machine-specific namespace derived from its `legacy_id`:
+
+- Namespace: `/machine/<vendor>/<id>/<serial>`
+
+The stream emits events for:
+
+- state changes (`StateEvent`)
+- live value updates (`LiveValuesEvent`)
+
+Both event payloads use the same machine-specific schema as the `/api/v2` REST responses.
+
+---
+
+## List of all machines
+
+Below is a template you can fill with links to the relevant Rust types (mutations + state/live structs).
+For each machine, link to:
+
+- **Mutations:** the request payload type used by `POST /api/v1/machine/<slug>/<serial>`
+- **State / Live Values:** the response payload types returned by `GET /api/v2/machine/<slug>/<serial>`
+
+### Machines
+
+- **winder_v1**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/winder2/api.rs#L87>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/winder2/api.rs#L163>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/winder2/api.rs#L143>
+
+- **extruder_v1**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder1/api.rs#L214>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder1/api.rs#L89>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder1/api.rs#L55>
+
+- **laser_v1**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/laser/api.rs#L88>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/laser/api.rs#L32>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/laser/api.rs#L17>
+
+- **mock**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/mock/api.rs#L84>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/mock/api.rs#L38>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/mock/api.rs#L24>
+
+- **extruder_v2**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder2/api.rs#L126>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder2/api.rs#L93>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder2/api.rs#L59>

electron/package-lock.json

@@ -27,7 +27,6 @@
         "@tanstack/react-router": "^1.130.17",
         "@tanstack/react-table": "^8.21.2",
         "@tanstack/router-devtools": "^1.105.0",
-        "@tanstack/zod-adapter": "^1.116.0",
         "@vitejs/plugin-react": "^4.5.2",
         "babel-plugin-react-compiler": "^19.0.0-beta-714736e-20250131",
         "class-variance-authority": "^0.7.1",
@@ -52,9 +51,9 @@
         "tailwind-merge": "^3.0.1",
         "tailwindcss-animate": "^1.0.7",
         "uplot": "^1.6.32",
-        "xlsx": "^0.18.5",
-        "zod": "^3.24.2",
-        "zod-validation-error": "^3.4.0",
+        "xlsx": "https://cdn.sheetjs.com/xlsx-0.20.3/xlsx-0.20.3.tgz",
+        "zod": "^4.3.5",
+        "zod-validation-error": "^5.0.0",
         "zustand": "^5.0.8"
       },
       "devDependencies": {
@@ -3129,6 +3128,66 @@
         "node": ">=14.0.0"
       }
     },
+    "node_modules/@tailwindcss/oxide-wasm32-wasi/node_modules/@emnapi/core": {
+      "version": "1.7.1",
+      "dev": true,
+      "inBundle": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "@emnapi/wasi-threads": "1.1.0",
+        "tslib": "^2.4.0"
+      }
+    },
+    "node_modules/@tailwindcss/oxide-wasm32-wasi/node_modules/@emnapi/runtime": {
+      "version": "1.7.1",
+      "dev": true,
+      "inBundle": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "tslib": "^2.4.0"
+      }
+    },
+    "node_modules/@tailwindcss/oxide-wasm32-wasi/node_modules/@emnapi/wasi-threads": {
+      "version": "1.1.0",
+      "dev": true,
+      "inBundle": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "tslib": "^2.4.0"
+      }
+    },
+    "node_modules/@tailwindcss/oxide-wasm32-wasi/node_modules/@napi-rs/wasm-runtime": {
+      "version": "1.1.0",
+      "dev": true,
+      "inBundle": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "@emnapi/core": "^1.7.1",
+        "@emnapi/runtime": "^1.7.1",
+        "@tybys/wasm-util": "^0.10.1"
+      }
+    },
+    "node_modules/@tailwindcss/oxide-wasm32-wasi/node_modules/@tybys/wasm-util": {
+      "version": "0.10.1",
+      "dev": true,
+      "inBundle": true,
+      "license": "MIT",
+      "optional": true,
+      "dependencies": {
+        "tslib": "^2.4.0"
+      }
+    },
+    "node_modules/@tailwindcss/oxide-wasm32-wasi/node_modules/tslib": {
+      "version": "2.8.1",
+      "dev": true,
+      "inBundle": true,
+      "license": "0BSD",
+      "optional": true
+    },
     "node_modules/@tailwindcss/oxide-win32-arm64-msvc": {
       "version": "4.1.18",
       "resolved": "https://registry.npmjs.org/@tailwindcss/oxide-win32-arm64-msvc/-/oxide-win32-arm64-msvc-4.1.18.tgz",
@@ -3408,23 +3467,6 @@
         "url": "https://github.com/sponsors/tannerlinsley"
       }
     },
-    "node_modules/@tanstack/zod-adapter": {
-      "version": "1.141.1",
-      "resolved": "https://registry.npmjs.org/@tanstack/zod-adapter/-/zod-adapter-1.141.1.tgz",
-      "integrity": "sha512-ZsGxo+/AFZnVdut8g7VkDZ6+xZ94+bHUyXv6FnB5tSmuPVFXuVwRCZnVida7EYYd3SOWpyy222e4Qkpob1xwOw==",
-      "license": "MIT",
-      "engines": {
-        "node": ">=12"
-      },
-      "funding": {
-        "type": "github",
-        "url": "https://github.com/sponsors/tannerlinsley"
-      },
-      "peerDependencies": {
-        "@tanstack/react-router": ">=1.43.2",
-        "zod": "^3.23.8"
-      }
-    },
     "node_modules/@testing-library/dom": {
       "version": "10.4.1",
       "resolved": "https://registry.npmjs.org/@testing-library/dom/-/dom-10.4.1.tgz",
@@ -4216,15 +4258,6 @@
         "node": ">=0.4.0"
       }
     },
-    "node_modules/adler-32": {
-      "version": "1.3.1",
-      "resolved": "https://registry.npmjs.org/adler-32/-/adler-32-1.3.1.tgz",
-      "integrity": "sha512-ynZ4w/nUUv5rrsR8UUGoe1VC9hZj6V5hU9Qw1HlMDJGEJw5S7TfTErWTjMys6M7vr0YWcPqs3qAr4ss0nDfP+A==",
-      "license": "Apache-2.0",
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/agent-base": {
       "version": "7.1.4",
       "resolved": "https://registry.npmjs.org/agent-base/-/agent-base-7.1.4.tgz",
@@ -4726,19 +4759,6 @@
         "url": "https://github.com/sponsors/wooorm"
       }
     },
-    "node_modules/cfb": {
-      "version": "1.2.2",
-      "resolved": "https://registry.npmjs.org/cfb/-/cfb-1.2.2.tgz",
-      "integrity": "sha512-KfdUZsSOw19/ObEWasvBP/Ac4reZvAGauZhs6S/gqNhXhI7cKwvlH7ulj+dOEYnca4bm4SGo8C1bTAQvnTjgQA==",
-      "license": "Apache-2.0",
-      "dependencies": {
-        "adler-32": "~1.3.0",
-        "crc-32": "~1.2.0"
-      },
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/chai": {
       "version": "5.3.3",
       "resolved": "https://registry.npmjs.org/chai/-/chai-5.3.3.tgz",
@@ -4857,15 +4877,6 @@
         "node": ">=6"
       }
     },
-    "node_modules/codepage": {
-      "version": "1.15.0",
-      "resolved": "https://registry.npmjs.org/codepage/-/codepage-1.15.0.tgz",
-      "integrity": "sha512-3g6NUTPd/YtuuGrhMnOMRjFc+LJw/bnMp3+0r/Wcz3IXUuCosKRJvMphm5+Q+bvTVGcJJuRvVLuYba+WojaFaA==",
-      "license": "Apache-2.0",
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/color-convert": {
       "version": "2.0.1",
       "resolved": "https://registry.npmjs.org/color-convert/-/color-convert-2.0.1.tgz",
@@ -4930,18 +4941,6 @@
       "integrity": "sha512-ZQBvi1DcpJ4GDqanjucZ2Hj3wEO5pZDS89BWbkcrvdxksJorwUDDZamX9ldFkp9aw2lmBDLgkObEA4DWNJ9FYQ==",
       "license": "MIT"
     },
-    "node_modules/crc-32": {
-      "version": "1.2.2",
-      "resolved": "https://registry.npmjs.org/crc-32/-/crc-32-1.2.2.tgz",
-      "integrity": "sha512-ROmzCKrTnOwybPcJApAA6WBWij23HVfGVNKqqrZpuyZOHqK2CwHSvpGuyt/UNNvaIjEd8X5IFGp4Mh+Ie1IHJQ==",
-      "license": "Apache-2.0",
-      "bin": {
-        "crc32": "bin/crc32.njs"
-      },
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/create-require": {
       "version": "1.1.1",
       "resolved": "https://registry.npmjs.org/create-require/-/create-require-1.1.1.tgz",
@@ -5964,6 +5963,29 @@
         "eslint": ">=7"
       }
     },
+    "node_modules/eslint-plugin-react-compiler/node_modules/zod": {
+      "version": "3.25.76",
+      "resolved": "https://registry.npmjs.org/zod/-/zod-3.25.76.tgz",
+      "integrity": "sha512-gzUt/qt81nXsFGKIFcC3YnfEAx5NkunCfnDlvuBSSFS02bcXu4Lmea0AFIUwbLWxWPx3d9p8S5QoaujKcNQxcQ==",
+      "dev": true,
+      "license": "MIT",
+      "funding": {
+        "url": "https://github.com/sponsors/colinhacks"
+      }
+    },
+    "node_modules/eslint-plugin-react-compiler/node_modules/zod-validation-error": {
+      "version": "3.5.4",
+      "resolved": "https://registry.npmjs.org/zod-validation-error/-/zod-validation-error-3.5.4.tgz",
+      "integrity": "sha512-+hEiRIiPobgyuFlEojnqjJnhFvg4r/i3cqgcm67eehZf/WBaK3g6cD02YU9mtdVxZjv8CzCA9n/Rhrs3yAAvAw==",
+      "dev": true,
+      "license": "MIT",
+      "engines": {
+        "node": ">=18.0.0"
+      },
+      "peerDependencies": {
+        "zod": "^3.24.4"
+      }
+    },
     "node_modules/eslint-plugin-react/node_modules/resolve": {
       "version": "2.0.0-next.5",
       "resolved": "https://registry.npmjs.org/resolve/-/resolve-2.0.0-next.5.tgz",
@@ -6248,15 +6270,6 @@
         "url": "https://github.com/sponsors/ljharb"
       }
     },
-    "node_modules/frac": {
-      "version": "1.1.2",
-      "resolved": "https://registry.npmjs.org/frac/-/frac-1.1.2.tgz",
-      "integrity": "sha512-w/XBfkibaTl3YDqASwfDUqkna4Z2p9cFSr1aHDt0WoMTECnRfBOv2WArlZILlqgWlmdIlALXGpM2AOhEk5W3IA==",
-      "license": "Apache-2.0",
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/fs.realpath": {
       "version": "1.0.0",
       "resolved": "https://registry.npmjs.org/fs.realpath/-/fs.realpath-1.0.0.tgz",
@@ -10298,9 +10311,9 @@
       }
     },
     "node_modules/seroval": {
-      "version": "1.4.0",
-      "resolved": "https://registry.npmjs.org/seroval/-/seroval-1.4.0.tgz",
-      "integrity": "sha512-BdrNXdzlofomLTiRnwJTSEAaGKyHHZkbMXIywOh7zlzp4uZnXErEwl9XZ+N1hJSNpeTtNxWvVwN0wUzAIQ4Hpg==",
+      "version": "1.4.2",
+      "resolved": "https://registry.npmjs.org/seroval/-/seroval-1.4.2.tgz",
+      "integrity": "sha512-N3HEHRCZYn3cQbsC4B5ldj9j+tHdf4JZoYPlcI4rRYu0Xy4qN8MQf1Z08EibzB0WpgRG5BGK08FTrmM66eSzKQ==",
       "license": "MIT",
       "engines": {
         "node": ">=10"
@@ -10623,18 +10636,6 @@
       "license": "BSD-3-Clause",
       "optional": true
     },
-    "node_modules/ssf": {
-      "version": "0.11.2",
-      "resolved": "https://registry.npmjs.org/ssf/-/ssf-0.11.2.tgz",
-      "integrity": "sha512-+idbmIXoYET47hH+d7dfm2epdOMUDjqcB4648sTZ+t2JwoyBFL/insLfB/racrDmsKB3diwsDA696pZMieAC5g==",
-      "license": "Apache-2.0",
-      "dependencies": {
-        "frac": "~1.1.2"
-      },
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/stackback": {
       "version": "0.0.2",
       "resolved": "https://registry.npmjs.org/stackback/-/stackback-0.0.2.tgz",
@@ -12060,24 +12061,6 @@
         "node": ">=8"
       }
     },
-    "node_modules/wmf": {
-      "version": "1.0.2",
-      "resolved": "https://registry.npmjs.org/wmf/-/wmf-1.0.2.tgz",
-      "integrity": "sha512-/p9K7bEh0Dj6WbXg4JG0xvLQmIadrner1bi45VMJTfnbVHsc7yIajZyoSoK60/dtVBs12Fm6WkUI5/3WAVsNMw==",
-      "license": "Apache-2.0",
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
-    "node_modules/word": {
-      "version": "0.3.0",
-      "resolved": "https://registry.npmjs.org/word/-/word-0.3.0.tgz",
-      "integrity": "sha512-OELeY0Q61OXpdUfTp+oweA/vtLVg5VDOXh+3he3PNzLGG/y0oylSOC1xRVj0+l4vQ3tj/bB1HVHv1ocXkQceFA==",
-      "license": "Apache-2.0",
-      "engines": {
-        "node": ">=0.8"
-      }
-    },
     "node_modules/word-wrap": {
       "version": "1.2.5",
       "resolved": "https://registry.npmjs.org/word-wrap/-/word-wrap-1.2.5.tgz",
@@ -12118,19 +12101,10 @@
       }
     },
     "node_modules/xlsx": {
-      "version": "0.18.5",
-      "resolved": "https://registry.npmjs.org/xlsx/-/xlsx-0.18.5.tgz",
-      "integrity": "sha512-dmg3LCjBPHZnQp5/F/+nnTa+miPJxUXB6vtk42YjBBKayDNagxGEeIdWApkYPOf3Z3pm3k62Knjzp7lMeTEtFQ==",
+      "version": "0.20.3",
+      "resolved": "https://cdn.sheetjs.com/xlsx-0.20.3/xlsx-0.20.3.tgz",
+      "integrity": "sha512-oLDq3jw7AcLqKWH2AhCpVTZl8mf6X2YReP+Neh0SJUzV/BdZYjth94tG5toiMB1PPrYtxOCfaoUCkvtuH+3AJA==",
       "license": "Apache-2.0",
-      "dependencies": {
-        "adler-32": "~1.3.0",
-        "cfb": "~1.2.1",
-        "codepage": "~1.15.0",
-        "crc-32": "~1.2.1",
-        "ssf": "~0.11.2",
-        "wmf": "~1.0.1",
-        "word": "~0.3.0"
-      },
       "bin": {
         "xlsx": "bin/xlsx.njs"
       },
@@ -12210,24 +12184,24 @@
       }
     },
     "node_modules/zod": {
-      "version": "3.25.76",
-      "resolved": "https://registry.npmjs.org/zod/-/zod-3.25.76.tgz",
-      "integrity": "sha512-gzUt/qt81nXsFGKIFcC3YnfEAx5NkunCfnDlvuBSSFS02bcXu4Lmea0AFIUwbLWxWPx3d9p8S5QoaujKcNQxcQ==",
+      "version": "4.3.5",
+      "resolved": "https://registry.npmjs.org/zod/-/zod-4.3.5.tgz",
+      "integrity": "sha512-k7Nwx6vuWx1IJ9Bjuf4Zt1PEllcwe7cls3VNzm4CQ1/hgtFUK2bRNG3rvnpPUhFjmqJKAKtjV576KnUkHocg/g==",
       "license": "MIT",
       "funding": {
         "url": "https://github.com/sponsors/colinhacks"
       }
     },
     "node_modules/zod-validation-error": {
-      "version": "3.5.4",
-      "resolved": "https://registry.npmjs.org/zod-validation-error/-/zod-validation-error-3.5.4.tgz",
-      "integrity": "sha512-+hEiRIiPobgyuFlEojnqjJnhFvg4r/i3cqgcm67eehZf/WBaK3g6cD02YU9mtdVxZjv8CzCA9n/Rhrs3yAAvAw==",
+      "version": "5.0.0",
+      "resolved": "https://registry.npmjs.org/zod-validation-error/-/zod-validation-error-5.0.0.tgz",
+      "integrity": "sha512-hmk+pkyKq7Q71PiWVSDUc3VfpzpvcRHZ3QPw9yEMVvmtCekaMeOHnbr3WbxfrgEnQTv6haGP4cmv0Ojmihzsxw==",
       "license": "MIT",
       "engines": {
         "node": ">=18.0.0"
       },
       "peerDependencies": {
-        "zod": "^3.24.4"
+        "zod": "^3.25.0 || ^4.0.0"
       }
     },
     "node_modules/zustand": {

electron/package.json

@@ -75,7 +75,6 @@
     "@tanstack/react-router": "^1.130.17",
     "@tanstack/react-table": "^8.21.2",
     "@tanstack/router-devtools": "^1.105.0",
-    "@tanstack/zod-adapter": "^1.116.0",
     "@vitejs/plugin-react": "^4.5.2",
     "babel-plugin-react-compiler": "^19.0.0-beta-714736e-20250131",
     "class-variance-authority": "^0.7.1",
@@ -100,9 +99,9 @@
     "tailwind-merge": "^3.0.1",
     "tailwindcss-animate": "^1.0.7",
     "uplot": "^1.6.32",
-    "xlsx": "^0.18.5",
-    "zod": "^3.24.2",
-    "zod-validation-error": "^3.4.0",
+    "xlsx": "https://cdn.sheetjs.com/xlsx-0.20.3/xlsx-0.20.3.tgz",
+    "zod": "^4.3.5",
+    "zod-validation-error": "^5.0.0",
     "zustand": "^5.0.8"
   }
 }

electron/src/assets/markdown/extruder/manual.md

@@ -1,65 +1,4 @@
-![Titelseite,screenshot from Word doccument](/images/manuals/extruder/Titelseite.jpeg)
-
-<!-- Datasheet: Added below Titelseite. Placeholder images to be replaced with final exports. -->
-
-# QiTech Pro Extruder – Datasheet
-
-![Datasheet Header](/images/manuals/extruder/datasheet/header.png)
-
-## Included Assemblies
-Electrical cabinet · Temperature controller · Frequency inverter · Cable routing + connection to QiTech Control (digital control)
-
-## Motor
-| Specification | Value |
-| ------------- | ----- |
-| Motor power | 1.5 kW |
-| Output speed | 41 rpm |
-| Output torque | 336 Nm |
-| Transmission ratio | 34:2 |
-| Service factor cG | 1.4 |
-| Voltage / Frequency | 400 V / 50 Hz |
-| Efficiency class | IE3 (Premium Efficiency) |
-| Efficiency @ 100% rated load / % rated current (std. voltage) | 5.98 / 3.45 A |
-| Protection class | IP55, Insulation class F |
-| Construction design | Flange design, terminal box top |
-| Shaft end (d×L) | 40 × 80 mm |
-
-## Melt Pressure Sensor (DSI1-1/2-500-F-15)
-| Specification | Value |
-| ------------- | ----- |
-| Output signal | 4–20 mA (2-conductor) |
-| Sensor system | Mercury-free |
-| Sensor | DMS Vollbrückentechnik |
-| Measuring accuracy | 0.5 % |
-| Calibration signal | 80 % |
-| Supply voltage | 15–32 VDC |
-| Measuring range | 0–500 bar |
-| Temperature range (membrane) | max. 410 °C |
-| Temperature range (sensor head) | max. 85 °C |
-| Screw-in thread | 1/2"–20 UNF |
-
-## Extruder Barrel & Screw
-Nitrided extruder barrel (Ø 65 mm). Screw hardened from high‑alloyed steel (Ø 25 mm).
-
-## Heating Elements & Temperature Sensors
-3 heating zones (max. 350 °C), Heater 415 V, 3 × 750 W. 3× Type K temperature sensors, 1/8" NPT.
-
-## Hopper
-Volume: 4 L · Material: Aluminum · Easily detachable.
-
-## Dimensions
-
-![Dimensions](/images/manuals/extruder/datasheet/dimensions.png)
-
-Overall length 1365 mm · Width 220 mm · Height 384 mm.
-
-Fully wired and assembled (raised on 2 aluminum profiles).
-
-Delivery time after completion: 2–5 working days.
-
-Warranty: 24 months after delivery (excluding wearing parts).
-
-<br>
+![Titelseite,screenshot from Word doccument](images/manuals/extruder/Titelseite.jpeg)
 
 <br>
 
@@ -116,7 +55,7 @@ Darmstadt, 10/06/2025
 
 64392 Darmstadt,
 
-<img src="/images/manuals/extruder/signature.jpeg" width="300" height="60"/>
+<img src="images/manuals/extruder/signature.jpeg" width="300" height="60"/>
 
 Milan von dem Bussche
 
@@ -162,7 +101,7 @@ Operating instructions
 
 # 1 Machine description
 
-![maschinenbeschreibung](/images/manuals/extruder/description.jpeg)
+![maschinenbeschreibung](images/manuals/extruder/description.jpeg)
 
 <br><br><br>
 
@@ -229,7 +168,7 @@ Accuracy class: 2
 
 | Picture                                       | Danger!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |
 | --------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
 
 <br><br><br>
 
@@ -237,17 +176,17 @@ Accuracy class: 2
 
 | Pictogram                                  | Description of pictogram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   | Pictogram                                  | Pictogram Description                                                                                                                                                                                                    |
 | ------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| ![w001](/images/manuals/extruder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](/images/manuals/extruder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
-| ![w008](/images/manuals/extruder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](/images/manuals/extruder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
-| ![w011](/images/manuals/extruder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](/images/manuals/extruder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
-| ![w004](/images/manuals/extruder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](/images/manuals/extruder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
-| ![w012](/images/manuals/extruder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](/images/manuals/extruder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
-| ![w017](/images/manuals/extruder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](/images/manuals/extruder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
-| ![w018](/images/manuals/extruder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](/images/manuals/extruder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
-| ![w019](/images/manuals/extruder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](/images/manuals/extruder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
-| ![w024](/images/manuals/extruder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](/images/manuals/extruder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
-| ![w025](/images/manuals/extruder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                            |                                                                                                                                                                                                                          |
-| ![w016](/images/manuals/extruder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                            |                                                                                                                                                                                                                          |
+| ![w001](images/manuals/extruder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](images/manuals/extruder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
+| ![w008](images/manuals/extruder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](images/manuals/extruder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
+| ![w011](images/manuals/extruder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](images/manuals/extruder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
+| ![w004](images/manuals/extruder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](images/manuals/extruder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
+| ![w012](images/manuals/extruder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](images/manuals/extruder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
+| ![w017](images/manuals/extruder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](images/manuals/extruder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
+| ![w018](images/manuals/extruder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](images/manuals/extruder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
+| ![w019](images/manuals/extruder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](images/manuals/extruder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
+| ![w024](images/manuals/extruder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](images/manuals/extruder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
+| ![w025](images/manuals/extruder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                            |                                                                                                                                                                                                                          |
+| ![w016](images/manuals/extruder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                            |                                                                                                                                                                                                                          |
 
 <br><br><br>
 
@@ -255,15 +194,15 @@ Accuracy class: 2
 
 | Prohibition signs Pictogram                                               | Pictogram description                                                                   | International pictograms / other Pictogram                                               | Pictogram Description                                                       |
 | ------------------------------------------------------------------------- | --------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------- | --------------------------------------------------------------------------- |
-| <img src="/images/manuals/extruder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="/images/manuals/extruder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
-| <img src="/images/manuals/extruder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="/images/manuals/extruder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
-| <img src="/images/manuals/extruder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="/images/manuals/extruder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
-| <img src="/images/manuals/extruder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="/images/manuals/extruder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
-| <img src="/images/manuals/extruder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="/images/manuals/extruder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
-| <img src="/images/manuals/extruder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="/images/manuals/extruder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
-| <img src="/images/manuals/extruder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="/images/manuals/extruder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
-| <img src="/images/manuals/extruder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                          |                                                                             |
-| <img src="/images/manuals/extruder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                          |                                                                             |
+| <img src="images/manuals/extruder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="images/manuals/extruder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
+| <img src="images/manuals/extruder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="images/manuals/extruder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
+| <img src="images/manuals/extruder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="images/manuals/extruder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
+| <img src="images/manuals/extruder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="images/manuals/extruder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
+| <img src="images/manuals/extruder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="images/manuals/extruder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
+| <img src="images/manuals/extruder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="images/manuals/extruder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
+| <img src="images/manuals/extruder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="images/manuals/extruder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
+| <img src="images/manuals/extruder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                          |                                                                             |
+| <img src="images/manuals/extruder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                          |                                                                             |
 
 <br><br><br>
 
@@ -336,7 +275,7 @@ The machine has a main switch that disconnects/connects the mains supply. The ON
 
 The emergency stop switch is used to quickly stop the machine in the event of danger. This is designed with redundant emergency stop contactors. An emergency stop switching device also prevents the machine from being switched on again after a power failure. By activating the emergency stop device, the entire machine is shut down and disconnected from the mains supply.
 
-![emergency stop button / switch](/images/manuals/extruder/emergency_stop.jpeg)
+![emergency stop button / switch](images/manuals/extruder/emergency_stop.jpeg)
 
 Hazardous movements are brought to a controlled standstill as quickly as possible. The machine can only be restarted by physically resetting the emergency stop switch and then starting one of the operating modes in the software.
 
@@ -418,11 +357,11 @@ Depending on the activity or the duration of the activity, the operator must det
 <br><br>
 | Picture | Danger |
 |---------|--------|
-| ![Warning](/images/manuals/extruder/w001.jpeg)|**Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves.
+| ![Warning](images/manuals/extruder/w001.jpeg)|**Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves.
 
 | Picture                                       | Caution!                                                                                                                                                                                                                                                                    |
 | --------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Danger to life due to incorrect installation and commissioning!** <brErrors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Danger to life due to incorrect installation and commissioning!** <brErrors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
 
 <br>
 <br>
@@ -451,7 +390,7 @@ The CEE plug of the extruder must be plugged into a suitable three-phase socket
 
 The machines are delivered with the newest version of the software installed. Updates, as well as previous updates and the software version can be viewed under Setup-> Updates. If a new version of the software is available, it will be displayed here. To perform the update an internet connection is required. In the next step, click the red "Select" button next to the chosen update. The display will now shut down, and when it is turned back on, the latest version of the software will be installed.
 
-![screenshot updates](/images/manuals/extruder/screenshot_updates.png)
+![screenshot updates](images/manuals/extruder/screenshot_updates.png)
 
 <br>
 
@@ -492,7 +431,7 @@ Then start the machine as follows:
 - Set the “target temperature” of the individual heating zones according to the melting material in the 3 input fields
 - Set the “target temperature” of the nozzle
 - After reaching the target temperature, wait 15 minutes until the machine has heated through and the plastic in the screw barrel has completely melted.
-  ![Screenshot: set traget temperature](/images/manuals/extruder/screenshot_adjust_heat.png)
+  ![Screenshot: set traget temperature](images/manuals/extruder/screenshot_adjust_heat.png)
 
 <br>
 
@@ -504,7 +443,7 @@ Then start the machine as follows:
 - Press the "Extrude" button in the “mode” box
 - Wait until old melt has been "flushed" out of the extruder, i.e. no more discolouration of the filament is no longer discoloured and a constant material flow has been achieved
 
-![screenshot: adjust screw speed](/images/manuals/extruder/screenshot_extruder_adjustscrew_speed.png)
+![screenshot: adjust screw speed](images/manuals/extruder/screenshot_extruder_adjustscrew_speed.png)
 
 <br>
 
@@ -532,7 +471,7 @@ Then start the machine as follows:
 - Go to "Config" in the funktion bar
 - To set the screw direction click on "Forward" or "Backward" in the "Invert settings" box
 
-![Changing screrw direction](/images/manuals/extruder/screenshot_config.png)
+![Changing screrw direction](images/manuals/extruder/screenshot_config.png)
 
 <br>
 
@@ -556,7 +495,7 @@ Then start the machine as follows:
 
 | Picture                                       | DANGER!                                                                                                                                                                                                                                                                  |
 | --------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Danger to life due to operation of the machine in a faulty condition.** <br> If safety-relevant changes or defects occur on the machine, shut it down immediately, secure it against being switched on again and report the incident to the responsible office/person! |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Danger to life due to operation of the machine in a faulty condition.** <br> If safety-relevant changes or defects occur on the machine, shut it down immediately, secure it against being switched on again and report the incident to the responsible office/person! |
 
 <br>
 <br>
@@ -594,11 +533,11 @@ If further work is necessary, such as replacing the extruder screw, please conta
 
 | Picture                                       | Caution!                                                                      |
 | --------------------------------------------- | ----------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Observe the instructions for maintenance work when servicing the machine!** |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Observe the instructions for maintenance work when servicing the machine!** |
 
 | Picture                                       | Caution!                                                                                                                           |
 | --------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Risk of screw breakage if disassembled while hot!** <br> Screw connections may only be loosened when the system has cooled down. |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Risk of screw breakage if disassembled while hot!** <br> Screw connections may only be loosened when the system has cooled down. |
 
 <br>
 <br>
@@ -681,15 +620,15 @@ Appliances with this logo on the packaging or on the appliance must be disposed
 
 | Picture                                                                 | Danger!                                                                                                                                                                                                                                                                                                                   |
 | ----------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
-| <img src="/images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The extruder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                         |
-| <img src="/images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
-| <img src="/images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the extruder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                           |
-| <img src="/images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
-| <img src="/images/manuals/extruder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
-| <img src="/images/manuals/extruder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
-| <img src="/images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
-| <img src="/images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
+| <img src="images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
+| <img src="images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The extruder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                         |
+| <img src="images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
+| <img src="images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the extruder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                           |
+| <img src="images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
+| <img src="images/manuals/extruder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
+| <img src="images/manuals/extruder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
+| <img src="images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
+| <img src="images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
 
 <br>
 <br>
@@ -735,7 +674,7 @@ The following persons must not work on the machine:
 
 | Picture                                                                                                                 | DANGER!                                                                                                                                  |
 | ----------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg)                                                                           | **Risk of injury due to insufficient qualification!** Improper handling can lead to considerable personal injury and damage to property. |
+| ![Warning](images/manuals/extruder/w001.jpeg)                                                                           | **Risk of injury due to insufficient qualification!** Improper handling can lead to considerable personal injury and damage to property. |
 | - Special activities may only be carried out by the persons specified in the respective chapters of these instructions. |
 
 <br>
@@ -764,24 +703,24 @@ The following persons must not work on the machine:
 
 ## Electrical Diagrams
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 1](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025-001.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 1](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025-001.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 2](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_2-002.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 2](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_2-002.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 3](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_3-003.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 3](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_3-003.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 4](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_4-004.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 4](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_4-004.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 5](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_5-005.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 5](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_5-005.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 6](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_6-006.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 6](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_6-006.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 7](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_7-007.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 7](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_7-007.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 8](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_8-008.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 8](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_8-008.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 9](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_9-009.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 9](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_9-009.png)
 
 ## Mechanical Diagrams
 
-![QiTech Pro Extruder Nozzle 2025](/images/manuals/extruder/Nozzle.png)
+![QiTech Pro Extruder Nozzle 2025](images/manuals/extruder/Nozzle.png)

electron/src/assets/markdown/winder/manual.md

@@ -1,88 +1,4 @@
-![Titelseite,screenshot from Word doccument](/images/manuals/winder/Titelseite.jpeg)
-
-<br>
-
-# Data sheet: QiTech Pro Winder
-
-![datasheet header illustration](/images/manuals/winder/datasheet/header.png)
-
-Short description:
-
-The QiTech Pro Winder is a machine for winding and rewinding 3D printing filaments and other strand materials. It is an improvement upon the proven QiTech Winder with support for multiple filament diameters, spools up to 5 kg, angular speeds up to 20 m/min and automatic adjustment of the winding speed depending on the filament tension.
-
-It consists of a pulling unit, a tension arm, a filament guiding traverse and the spool axis. It is controlled by a computer using the QiTech Control software. The traverse movement ensures a clean wind of the filament on the spool. Automatic load adjustment allows for tight winding without having to manually readjust the winding speed each layer. A laser in the traverse allows for easy calibration of the spool width.
-
-<br>
-
-## Scope of delivery
-
-| # | Item                                      |
-| - | ----------------------------------------- |
-| 1 | QiTech Pro Winder                         |
-| 2 | 2x Spool Carrier-Pins                     |
-| 3 | 4x Weights for tension arm                |
-| 4 | 230V/110V to 24V Power Supply             |
-| 5 | USB C to USB A cable                      |
-| 6 | USB Drive with QiTech Control software    |
-| 7 | Operating manual                          |
-| 8 | optional: wheeled frame                   |
-
-<br>
-
-## Dimensions and Weight
-
-![dimensions top view](/images/manuals/winder/datasheet/dimensions-top.png)
-![dimensions front view](/images/manuals/winder/datasheet/gestell.png)
-
-|                | no frame | incl. frame |
-| -------------- | -------- | ----------- |
-| Weight         | 20 kg    | 35 kg       |
-| Length (1)     | 91 cm    | 91 cm       |
-| Width (2)      | 50 cm    | 50 cm       |
-| Height (3)     | 42 cm    | 134 cm      |
-
-<br>
-
-## Requirements of the Spool
-
-The QiTech Pro Winder is compatible with almost all spools. The spool is rotated by a Carrier-Pin and secured against lateral slipping by a quick release mechanism. The maximum spool weight is 5 kg.
-
-![min/max spool dimensions](/images/manuals/winder/datasheet/spool-min-max.png)
-
-<br>
-
-## Winding Speed
-
-How many meters of filament can be wound per minute at maximum speed depends on the inner diameter of the spool/how much filament has already been wound. The resulting path speed determines how much filament can be wound up in a given time. We take a usual spool with an inner diameter of 100 mm to calculate an expected maximum speed. If the inner diameter is larger, the maximum speed shifts upwards.
-
-Winding Speed:
-
-- Min.: 0.5 Meters/Minute
-- Max.: 20 Meters/Minute
-
-<br>
-
-## Friction of the puller rolls
-
-Since the diameter of the extruded filament depends primarily on the pulling speed of the Pro Winder, it is important that it remains constant. This is ensured on the one hand by the use of a stepper motor as drive. At the same time, a vulcanized PU coating of the rolls and a spring-increased contact pressure make the filament only slip through from approx. 30 N tension.
-
-<br>
-
-## Auto-Stop function
-
-When extruding or rewinding, it is often the case that a specific amount of meters must be wound onto a spool. The QiTech Pro Winder has an integrated filament length measurement. For example, after 100 m, it can automatically switch from "wind" to "pull" mode. In addition, the operator is alerted acoustically that the spool has finished winding.
-
-![auto stop ui placeholder](/images/manuals/winder/datasheet/autostop-ui.png)
-
-<br>
-
-## Electronics / Power consumption
-
-| Specification         | Value                      |
-| --------------------- | -------------------------- |
-| Mains connection      | 230V/50Hz or 110V/60Hz     |
-| Ø Load in operation   | 3A at 24V                  |
-| Ø Consumption in use  | 72 Wh                      |
+![Titelseite,screenshot from Word doccument](images/manuals/winder/Titelseite.jpeg)
 
 <br>
 
@@ -139,7 +55,7 @@ Darmstadt, 10/06/2025
 
 64392 Darmstadt,
 
-<img src="/images/manuals/winder/signature.jpeg" width="300" height="60"/>
+<img src="images/manuals/winder/signature.jpeg" width="300" height="60"/>
 
 Milan von dem Bussche
 
@@ -185,7 +101,7 @@ Operating instructions
 
 # 1 Machine description
 
-![maschinenbeschreibung](/images/manuals/winder/description.png)
+![maschinenbeschreibung](images/manuals/winder/description.png)
 
 | Item number | Item number Description                   |
 | ----------- | ----------------------------------------- |
@@ -270,7 +186,7 @@ Accuracy class: 2
 
 | Picture                                     | Danger!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |
 | ------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/winder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
+| ![Warning](images/manuals/winder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
 
 <br><br><br>
 
@@ -278,17 +194,17 @@ Accuracy class: 2
 
 | Pictogram                                | Description of pictogram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   | Pictogram                                | Pictogram Description                                                                                                                                                                                                    |
 | ---------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| ![w001](/images/manuals/winder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](/images/manuals/winder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
-| ![w008](/images/manuals/winder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](/images/manuals/winder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
-| ![w011](/images/manuals/winder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](/images/manuals/winder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
-| ![w004](/images/manuals/winder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](/images/manuals/winder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
-| ![w012](/images/manuals/winder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](/images/manuals/winder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
-| ![w017](/images/manuals/winder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](/images/manuals/winder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
-| ![w018](/images/manuals/winder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](/images/manuals/winder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
-| ![w019](/images/manuals/winder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](/images/manuals/winder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
-| ![w024](/images/manuals/winder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](/images/manuals/winder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
-| ![w025](/images/manuals/winder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                          |                                                                                                                                                                                                                          |
-| ![w016](/images/manuals/winder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                          |                                                                                                                                                                                                                          |
+| ![w001](images/manuals/winder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](images/manuals/winder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
+| ![w008](images/manuals/winder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](images/manuals/winder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
+| ![w011](images/manuals/winder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](images/manuals/winder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
+| ![w004](images/manuals/winder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](images/manuals/winder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
+| ![w012](images/manuals/winder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](images/manuals/winder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
+| ![w017](images/manuals/winder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](images/manuals/winder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
+| ![w018](images/manuals/winder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](images/manuals/winder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
+| ![w019](images/manuals/winder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](images/manuals/winder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
+| ![w024](images/manuals/winder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](images/manuals/winder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
+| ![w025](images/manuals/winder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                          |                                                                                                                                                                                                                          |
+| ![w016](images/manuals/winder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                          |                                                                                                                                                                                                                          |
 
 <br><br><br>
 
@@ -296,15 +212,15 @@ Accuracy class: 2
 
 | Prohibition signs Pictogram                                             | Pictogram description                                                                   | International pictograms / other Pictogram                                             | Pictogram Description                                                       |
 | ----------------------------------------------------------------------- | --------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------- | --------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="/images/manuals/winder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
-| <img src="/images/manuals/winder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="/images/manuals/winder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
-| <img src="/images/manuals/winder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="/images/manuals/winder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
-| <img src="/images/manuals/winder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="/images/manuals/winder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
-| <img src="/images/manuals/winder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="/images/manuals/winder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
-| <img src="/images/manuals/winder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="/images/manuals/winder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
-| <img src="/images/manuals/winder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="/images/manuals/winder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
-| <img src="/images/manuals/winder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                        |                                                                             |
-| <img src="/images/manuals/winder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                        |                                                                             |
+| <img src="images/manuals/winder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="images/manuals/winder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
+| <img src="images/manuals/winder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="images/manuals/winder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
+| <img src="images/manuals/winder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="images/manuals/winder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
+| <img src="images/manuals/winder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="images/manuals/winder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
+| <img src="images/manuals/winder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="images/manuals/winder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
+| <img src="images/manuals/winder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="images/manuals/winder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
+| <img src="images/manuals/winder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="images/manuals/winder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
+| <img src="images/manuals/winder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                        |                                                                             |
+| <img src="images/manuals/winder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                        |                                                                             |
 
 <br><br><br>
 
@@ -342,7 +258,7 @@ In addition, the following procedures must be regarded as misuse:
 
 <br><br><br>
 
-![spool sizes](/images/manuals/winder/spools.jpeg)
+![spool sizes](images/manuals/winder/spools.jpeg)
 
 <br><br><br>
 
@@ -370,7 +286,7 @@ Hazardous movements are brought to a controlled standstill as quickly as possibl
 
 <br>
 
-<img src="/images/manuals/winder/emergency_stop.jpeg" width="300" height="300"/>
+<img src="images/manuals/winder/emergency_stop.jpeg" width="300" height="300"/>
 
 <br>
 
@@ -427,8 +343,8 @@ Depending on the activity or the duration of the activity, the operator must det
 <br><br>
 | Picture | Danger |
 |---------|--------|
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves. |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to incorrect installation and commissioning!** <br> Errors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves. |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to incorrect installation and commissioning!** <br> Errors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
 
 <br><br>
 
@@ -448,7 +364,7 @@ The machines are delivered with the newest version of the software installed. Up
 
 <br>
 
-![screenshot of update tab](/images/manuals/winder/screenshot_updates.png)
+![screenshot of update tab](images/manuals/winder/screenshot_updates.png)
 
 <br>
 
@@ -496,7 +412,7 @@ Then start the machine as follows:
 
 <br>
 
-![screenshot outer limit](/images/manuals/winder/screenshot_traverse.png)
+![screenshot outer limit](images/manuals/winder/screenshot_traverse.png)
 
 <br>
 
@@ -519,7 +435,7 @@ The **padding** parameter creates a safety margin that prevents the filament fro
 
 The default padding is 0.88mm, but you can adjust this value in the Control settings based on your filament diameter and winding requirements. Larger filaments may require more padding, while smaller filaments can use less padding for maximum spool utilization.
 
-![Padding example](/images/manuals/winder/winder_padding_example_image.jpg)
+![Padding example](images/manuals/winder/winder_padding_example_image.jpg)
 
 <br>
 
@@ -532,7 +448,7 @@ The default padding is 0.88mm, but you can adjust this value in the Control sett
 
 <br>
 
-![screernshot target speed](/images/manuals/winder/screenshot_targetspeed.png)
+![screernshot target speed](images/manuals/winder/screenshot_targetspeed.png)
 
 <br>
 
@@ -598,7 +514,7 @@ All settings such as the position of the spool sides, the winding speed or the f
 
 | Picture                                                               | Danger!                                                                                                                                                                                                                                           |
 | --------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to operation of the machine in faulty condition** <br> If safety-relevant changes or defects occur on the machine, shut down immediately, secure against restarting and report the process to the responsible office/person! |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to operation of the machine in faulty condition** <br> If safety-relevant changes or defects occur on the machine, shut down immediately, secure against restarting and report the process to the responsible office/person! |
 
 <br><br>
 
@@ -642,14 +558,14 @@ The polyurethane coating of the puller rollers will inevitably wear out over tim
 
 Now remove the black plastic caps and simply pull out the puller rollers. To install the new rollers back on, slide them on the axes, put the plastic cap back on and screw the screws.
 
-<img src="/images/manuals/winder/swapping_out_rollers.jpeg" width="300" height="400"/>
+<img src="images/manuals/winder/swapping_out_rollers.jpeg" width="300" height="400"/>
 
 <br>
 <br>
 
 | Picture                                                               | Caution!                                                                  |
 | --------------------------------------------------------------------- | ------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | Observe the instructions for maintenance work when servicing the machine! |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | Observe the instructions for maintenance work when servicing the machine! |
 
 <br>
 <br>
@@ -714,7 +630,7 @@ The machine consists largely of aluminum and plastic and can be easily separated
 
 | Picture                                                                   | Disposal Instructions                                                                                                                                                                                                                                                                                            |
 | ------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/trashcan.jpeg" width="150" height="150"/> | Appliances with this logo on the packaging or on the appliance must be disposed of separately. These devices must not be disposed of with normal household waste. You are responsible for ensuring that any electrical or electronic waste is disposed of at the appropriate locations, e.g., recycling centers. |
+| <img src="images/manuals/winder/trashcan.jpeg" width="150" height="150"/> | Appliances with this logo on the packaging or on the appliance must be disposed of separately. These devices must not be disposed of with normal household waste. You are responsible for ensuring that any electrical or electronic waste is disposed of at the appropriate locations, e.g., recycling centers. |
 
 <br><br><br>
 
@@ -722,15 +638,15 @@ The machine consists largely of aluminum and plastic and can be easily separated
 
 | Picture                                                               | Danger!                                                                                                                                                                                                                                                                                                                   |
 | --------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The winder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                           |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
-| <img src="/images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the winder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                             |
-| <img src="/images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
-| <img src="/images/manuals/winder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
-| <img src="/images/manuals/winder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
-| <img src="/images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
-| <img src="/images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The winder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                           |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
+| <img src="images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the winder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                             |
+| <img src="images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
+| <img src="images/manuals/winder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
+| <img src="images/manuals/winder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
+| <img src="images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
+| <img src="images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
 
 # 4 Glossary and Definitions
 
@@ -771,7 +687,7 @@ The following persons may not work on the machine:
 
 | Picture                                                               | Danger!                                                                                                                                                                                                                                                     |
 | --------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury if insufficiently qualified!** <br> Improper handling can lead to considerable personal injury and damage to property. Special activities may only be carried out by the persons specified in the relevant sections of these instructions. |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury if insufficiently qualified!** <br> Improper handling can lead to considerable personal injury and damage to property. Special activities may only be carried out by the persons specified in the relevant sections of these instructions. |
 
 <br>
 <br>
@@ -800,12 +716,12 @@ The following persons may not work on the machine:
 
 ## Electrical Diagrams
 
-![QiTech Pro Winder Electrical Diagram - Sheet 1](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram-001.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 1](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram-001.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 2](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_2-002.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 2](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_2-002.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 3](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_3-003.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 3](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_3-003.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 4](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_4-004.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 4](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_4-004.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 5](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_5-005.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 5](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_5-005.png)

electron/src/client/mainNamespace.ts

@@ -15,25 +15,31 @@ import {
   machineIdentificationUnique,
 } from "@/machines/types";
 import { useRef } from "react";
-import { rustEnumSchema } from "@/lib/types";
+import { rustEnum } from "@/lib/types";
+
+export type EthercatDevices = z.infer<typeof ethercatDevicesSchema>;
+
+export const ethercatDevicesSchema = z.object({
+  devices: z.array(
+    z.object({
+      configured_address: z.number().int(),
+      name: z.string(),
+      vendor_id: z.number().int(),
+      product_id: z.number().int(),
+      revision: z.number().int(),
+      device_identification: deviceIdentification,
+    }),
+  ),
+});
 
 // Update the EthercatDevicesEventData schema
-export const ethercatDevicesEventDataSchema = rustEnumSchema({
-  Initializing: z.boolean(),
-  Done: z.object({
-    devices: z.array(
-      z.object({
-        configured_address: z.number().int(),
-        name: z.string(),
-        vendor_id: z.number().int(),
-        product_id: z.number().int(),
-        revision: z.number().int(),
-        device_identification: deviceIdentification,
-      }),
-    ),
-  }),
-  Error: z.string(),
-});
+export const ethercatDevicesEventDataSchema = z
+  .object({
+    Initializing: z.boolean(),
+    Done: ethercatDevicesSchema,
+    Error: z.string(),
+  })
+  .check(rustEnum);
 
 export type EthercatDevicesEventData = z.infer<
   typeof ethercatDevicesEventDataSchema
@@ -62,10 +68,12 @@ export const machinesEventSchema = eventSchema(machinesEventDataSchema);
 export type MachinesEvent = z.infer<typeof machinesEventSchema>;
 
 // Keep the EthercatInterfaceDiscovery event
-export const ethercatInterfaceDiscoveryEventDataSchema = rustEnumSchema({
-  Discovering: z.boolean(),
-  Done: z.string(),
-});
+export const ethercatInterfaceDiscoveryEventDataSchema = z
+  .object({
+    Discovering: z.boolean(),
+    Done: z.string(),
+  })
+  .check(rustEnum);
 
 export type EthercatInterfaceDiscoveryEventData = z.infer<
   typeof ethercatInterfaceDiscoveryEventDataSchema
@@ -110,23 +118,19 @@ export function mainMessageHandler(
     try {
       // Apply appropriate caching strategy based on event type
       if (eventName === "EthercatDevicesEvent") {
-        const validatedEvent = ethercatDevicesEventSchema.parse(event);
-        console.log("EthercatDevicesEvent", validatedEvent);
+        const validatedEvent = event;
         store.setState((state) => ({
           ...state,
           ethercatDevices: validatedEvent,
         }));
       } else if (eventName === "MachinesEvent") {
         const validatedEvent = machinesEventSchema.parse(event);
-        console.log("MachinesEvent", validatedEvent);
         store.setState((state) => ({
           ...state,
           machines: validatedEvent,
         }));
       } else if (eventName === "EthercatInterfaceDiscoveryEvent") {
-        const validatedEvent =
-          ethercatInterfaceDiscoveryEventSchema.parse(event);
-        console.log("EthercatInterfaceDiscoveryEvent", validatedEvent);
+        const validatedEvent = event;
         store.setState((state) => ({
           ...state,
           ethercatInterfaceDiscovery: validatedEvent,

electron/src/client/socketioStore.ts

@@ -163,6 +163,7 @@ export const handleEventValidationError = (
   error: z.ZodError,
   eventName: string,
 ) => {
+  console.log(error);
   toastZodError(error, `Event Validation Error for ${eventName}`);
   throw new Error(`Event validation failed for ${eventName}`);
 };

electron/src/components/ManualMarkdown.tsx

@@ -1,67 +0,0 @@
-import React from "react";
-import { Markdown } from "./Markdown";
-
-type ManualMarkdownProps = {
-  /**
-   * The markdown content to render
-   */
-  markdownContent: string;
-};
-
-/**
- * A specialized Markdown component for rendering machine manuals.
- *
- * This component transforms image paths in markdown to work correctly in the Electron app.
- * Manual markdown files are stored in `docs/machines/manuals/` with relative image paths
- * pointing to `../../../../electron/public/images/manuals/[machine-name]/...`
- *
- * This component transforms those paths to absolute paths `/images/manuals/[machine-name]/...`
- * that work correctly in the Electron app's context.
- *
- * Path transformation examples:
- * - `../../../../electron/public/images/manuals/winder/image.png` → `/images/manuals/winder/image.png`
- * - `images/manuals/winder/image.png` → `/images/manuals/winder/image.png`
- */
-export function ManualMarkdown({ markdownContent }: ManualMarkdownProps) {
-  const transformedContent = React.useMemo(() => {
-    // Transform image paths to work in Electron context
-    // Pattern 1: ../../../../electron/public/images/manuals/... → /images/manuals/...
-    let content = markdownContent.replace(
-      /!\[([^\]]*)\]\(\.\.\/\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^)]+)\)/g,
-      "![$1](/$2)",
-    );
-
-    // Pattern 2: ../../../electron/public/images/manuals/... → /images/manuals/... (backward compatibility)
-    content = content.replace(
-      /!\[([^\]]*)\]\(\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^)]+)\)/g,
-      "![$1](/$2)",
-    );
-
-    // Pattern 3: images/manuals/... → /images/manuals/... (for backward compatibility)
-    content = content.replace(
-      /!\[([^\]]*)\]\(images\/manuals\/([^)]+)\)/g,
-      "![$1](/images/manuals/$2)",
-    );
-
-    // Pattern 4: Handle <img> tags with src attribute (new path)
-    content = content.replace(
-      /<img\s+([^>]*)src="\.\.\/\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^"]+)"/g,
-      '<img $1src="/$2"',
-    );
-
-    // Pattern 5: Handle <img> tags with src attribute (old path)
-    content = content.replace(
-      /<img\s+([^>]*)src="\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^"]+)"/g,
-      '<img $1src="/$2"',
-    );
-
-    content = content.replace(
-      /<img\s+([^>]*)src="images\/manuals\/([^"]+)"/g,
-      '<img $1src="/images/manuals/$2"',
-    );
-
-    return content;
-  }, [markdownContent]);
-
-  return <Markdown text={transformedContent} />;
-}

electron/src/components/MarkdownWithToc.tsx

@@ -1,6 +1,5 @@
 import React from "react";
 import { Markdown } from "./Markdown";
-import { ManualMarkdown } from "./ManualMarkdown";
 import { MarkdownToc } from "./MarkdownToc";
 
 type MarkdownWithTocProps = {
@@ -27,11 +26,6 @@ type MarkdownWithTocProps = {
    * @default "top-4"
    */
   stickyTop?: string;
-  /**
-   * Whether this is a machine manual (enables image path transformation)
-   * @default false
-   */
-  isManual?: boolean;
 };
 
 /**
@@ -50,19 +44,12 @@ export function MarkdownWithToc({
   tocWidth = "w-64",
   gap = "gap-6",
   stickyTop = "top-6",
-  isManual = false,
 }: MarkdownWithTocProps) {
-  const MarkdownComponent = isManual ? ManualMarkdown : Markdown;
-
   return (
     <div className={`flex ${gap}`}>
       {/* Main Content */}
       <div className="min-w-0 flex-1">
-        {isManual ? (
-          <ManualMarkdown markdownContent={markdownContent} />
-        ) : (
-          <Markdown text={markdownContent} />
-        )}
+        <Markdown text={markdownContent} />
       </div>
 
       {/* Table of Contents Sidebar */}

electron/src/components/preset/NewPresetDialog.tsx

@@ -1,4 +1,3 @@
-import { PresetData, PresetSchema } from "@/lib/preset/preset";
 import {
   Dialog,
   DialogContent,
@@ -14,13 +13,13 @@ import { Separator } from "../ui/separator";
 import { PresetPreviewEntries, PresetPreviewTable } from "./PresetPreviewTable";
 import { Input } from "../ui/input";
 
-export type NewPresetDialogProps<T extends PresetSchema> = {
-  currentState?: PresetData<T>;
+export type NewPresetDialogProps<T> = {
+  currentState?: T;
   previewEntries: PresetPreviewEntries<T>;
   onSave: (name: string) => void;
 };
 
-export function NewPresetDialog<T extends PresetSchema>({
+export function NewPresetDialog<T>({
   currentState,
   onSave,
   previewEntries,

electron/src/components/preset/PresetCard.tsx

@@ -60,7 +60,7 @@ export function PresetCardMenu({
   );
 }
 
-export type PresetCardProps<T extends PresetSchema> = {
+export type PresetCardProps<T> = {
   preset: Preset<T>;
   onApply: (preset: Preset<T>) => void;
   onOverwrite: (preset: Preset<T>) => void;
@@ -72,7 +72,7 @@ export type PresetCardProps<T extends PresetSchema> = {
   isActive?: boolean;
 };
 
-export function PresetCard<T extends PresetSchema>({
+export function PresetCard<T>({
   preset,
   onApply,
   onOverwrite,

electron/src/components/preset/PresetPreviewTable.tsx

@@ -1,28 +1,27 @@
 import React, { Fragment } from "react";
-import { PresetData, PresetSchema } from "@/lib/preset/preset";
 import { renderUnitSymbol, renderUnitSyntax, Unit } from "@/control/units";
 
 export const previewSeparator = undefined;
 
 type PreviewSeparator = typeof previewSeparator;
 
-type PresetPreviewEntry<T extends PresetSchema> = {
+type PresetPreviewEntry<T> = {
   name: string;
   unit?: Unit;
-  renderValue: (data: PresetData<T>) => string | undefined;
+  renderValue: (data: T) => string | undefined;
 };
 
-export type PresetPreviewEntries<T extends PresetSchema> = (
+export type PresetPreviewEntries<T> = (
   | PresetPreviewEntry<T>
   | PreviewSeparator
 )[];
 
-export type PresetPreviewTableProps<T extends PresetSchema> = {
-  data: PresetData<T>;
+export type PresetPreviewTableProps<T> = {
+  data?: T;
   entries: PresetPreviewEntries<T>;
 };
 
-export function PresetPreviewTable<T extends PresetSchema>({
+export function PresetPreviewTable<T>({
   data,
   entries,
 }: PresetPreviewTableProps<T>) {
@@ -39,7 +38,7 @@ export function PresetPreviewTable<T extends PresetSchema>({
           );
         }
 
-        const value = entry.renderValue(data);
+        const value = data !== undefined ? entry.renderValue(data) : undefined;
         return (
           <Fragment key={entry.name}>
             <div>{entry.name}</div>

electron/src/components/preset/PresetShowDialog.tsx

@@ -1,4 +1,4 @@
-import { Preset, PresetSchema } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import {
   Dialog,
   DialogContent,
@@ -13,14 +13,14 @@ import { Icon } from "../Icon";
 import { Separator } from "../ui/separator";
 import { PresetPreviewEntries, PresetPreviewTable } from "./PresetPreviewTable";
 
-export type PresetShowDialogProps<T extends PresetSchema> = {
+export type PresetShowDialogProps<T> = {
   preset: Preset<T>;
   previewEntries: PresetPreviewEntries<T>;
   onApply: (preset: Preset<T>) => void;
   hideDate?: boolean;
 };
 
-export function PresetShowDialog<T extends PresetSchema>({
+export function PresetShowDialog<T>({
   preset,
   onApply,
   previewEntries,

electron/src/components/preset/PresetsPage.tsx

@@ -2,19 +2,19 @@ import React from "react";
 import { ControlGrid } from "@/control/ControlGrid";
 import { Page } from "@/components/Page";
 import { usePresets, UsePresetsParams } from "@/lib/preset/usePresets";
-import { Preset, PresetSchema } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import { PresetCard } from "./PresetCard";
 import { PresetPreviewEntries } from "./PresetPreviewTable";
 import { NewPresetDialog } from "./NewPresetDialog";
 import { downloadJson } from "@/lib/download";
 import { JsonFileInput } from "../FileInput";
 
-type PresetsPageProps<T extends PresetSchema> = UsePresetsParams<T> & {
+type PresetsPageProps<T> = UsePresetsParams<T> & {
   applyPreset: (preset: Preset<T>) => void;
   previewEntries: PresetPreviewEntries<T>;
 };
 
-export function PresetsPage<T extends PresetSchema>({
+export function PresetsPage<T>({
   applyPreset,
   machine_identification,
   currentState,

electron/src/control/EditValue.tsx

@@ -36,7 +36,6 @@ type Props = {
   maxSlider?: number; // Override the slider max value
   maxLabel?: string;
   step?: number;
-  valueSchema?: z.ZodType<number>;
   inverted?: boolean;
   confirmation?: string;
   renderValue: (value: number) => string;
@@ -89,7 +88,6 @@ export function EditValue({
   description,
   defaultValue,
   step = 1,
-  valueSchema: schema,
   inverted,
   min,
   max,
@@ -104,7 +102,7 @@ export function EditValue({
 
   // Form setup
   const formSchema = z.object({
-    value: schema ?? z.number(),
+    value: z.number(),
   });
   type FormSchema = z.infer<typeof formSchema>;
 
@@ -191,7 +189,6 @@ export function EditValue({
     const numericValue = parseFloat(normalizedInput);
     const hasValidationError =
       isNaN(numericValue) ||
-      (schema && !schema.safeParse(numericValue).success) ||
       (max !== undefined && numericValue > max) ||
       (min !== undefined && numericValue < min);
 
@@ -222,15 +219,7 @@ export function EditValue({
       setValueStringError(false);
       preventFormSyncRef.current = false;
     }
-  }, [
-    valueString,
-    valueStringDirty,
-    schema,
-    max,
-    min,
-    form,
-    roundToStepDecimals,
-  ]);
+  }, [valueString, valueStringDirty, max, min, form, roundToStepDecimals]);
 
   // Reset input state to clean form value
   const resetInput = React.useCallback(() => {

electron/src/control/units.tsx

@@ -28,10 +28,9 @@ export function getUnitIcon(unit: Unit): IconName {
     case "Hz":
       return "lu:AudioWaveform";
     case "W":
-      return "lu:Zap";
     case "V":
-      return "lu:Zap";
     case "A":
+    case "mA":
       return "lu:Zap";
     case "kWh":
       return "lu:BatteryFull";
@@ -82,6 +81,8 @@ export function renderUnitSymbol(unit: Unit | undefined): string {
       return "W";
     case "V":
       return "V";
+    case "mA":
+      return "mA";
     case "A":
       return "A";
     case "kWh":
@@ -105,11 +106,11 @@ export function renderUnitSymbol(unit: Unit | undefined): string {
   }
 }
 
+// this function will add prefix/suffix to the valueString but without unit symbol.
 // example
-// value: 10.0
-// -> valueString: "10" (custom input)
-// this function will add prefix/suffix to the valueString but without unit symbol
-// -> "10°"
+//   const f = 3.1415;
+//   renderUnitSyntax(f.toFixed(2), "deg")
+// result: "3.14°"
 export function renderUnitSyntax(
   valueString: string | undefined,
   unit: Unit | undefined,
@@ -155,6 +156,8 @@ export function renderUnitSymbolLong(unit: Unit): string {
       return "watts";
     case "V":
       return "volts";
+    case "mA":
+      return "milliamperes";
     case "A":
       return "amperes";
     case "kWh":
@@ -192,6 +195,7 @@ export const units = [
   "Hz",
   "W",
   "V",
+  "mA",
   "A",
   "kWh",
   "l/min",

electron/src/lib/objects.ts

@@ -1,4 +1,7 @@
-export function deepEquals<T>(a: T, b: T): boolean {
+export function deepEquals(
+  a: object | undefined,
+  b: object | undefined,
+): boolean {
   if (a === b) {
     return true;
   }

electron/src/lib/preset/preset.ts

@@ -1,20 +1,16 @@
 import { machineIdentification } from "@/machines/types";
 import { z } from "zod";
 
-export type PresetSchema = z.ZodTypeAny;
+export type PresetSchema<T> = z.ZodType<T>;
 
-export const presetSchema = <S extends PresetSchema>(dataSchema: S) =>
+export const presetSchema = <T>(dataSchema: PresetSchema<T>) =>
   z.object({
     id: z.number().int().nonnegative().optional(),
     name: z.string().nonempty(),
     lastModified: z.coerce.date(),
     machineIdentification,
     schemaVersion: z.number().int().positive(),
-    data: dataSchema,
+    data: dataSchema.optional(),
   });
 
-export type Preset<S extends PresetSchema> = z.infer<
-  ReturnType<typeof presetSchema<S>>
->;
-
-export type PresetData<S extends PresetSchema> = z.infer<S>;
+export type Preset<T> = z.infer<ReturnType<typeof presetSchema<T>>>;

electron/src/lib/preset/presetStore.ts

@@ -1,6 +1,6 @@
 import { create } from "zustand";
 import { persist, PersistStorage, StorageValue } from "zustand/middleware";
-import { Preset, PresetSchema, presetSchema } from "./preset";
+import { Preset, presetSchema } from "./preset";
 import { MachineIdentification } from "@/machines/types";
 import { z } from "zod";
 import { toastError } from "@/components/Toast";
@@ -33,9 +33,9 @@ type PresetStoreData = {
 };
 
 export type PresetStore = PresetStoreData & {
-  insert: <T extends PresetSchema>(preset: Preset<T>) => PersistedPreset;
-  update: <T extends PresetSchema>(preset: Preset<T>) => void;
-  remove: <T extends PresetSchema>(preset: Preset<T>) => void;
+  insert: <T>(preset: Preset<T>) => PersistedPreset;
+  update: <T>(preset: Preset<T>) => void;
+  remove: <T>(preset: Preset<T>) => void;
   getById: (id: number) => PersistedPreset | undefined;
 
   setLatestPresetId: (
@@ -100,7 +100,7 @@ export const usePresetStore = create<PresetStore>()(
       presets: [],
       latestPresetIds: new Map(),
 
-      insert: <T extends PresetSchema>(preset: Preset<T>) => {
+      insert: <T>(preset: Preset<T>) => {
         const state = get();
         const { presets } = state;
         const ids = presets.map((p: PersistedPreset) => p.id);
@@ -115,7 +115,7 @@ export const usePresetStore = create<PresetStore>()(
         return persistedPreset;
       },
 
-      update: <T extends PresetSchema>(preset: Preset<T>) => {
+      update: <T>(preset: Preset<T>) => {
         const state = get();
         const presets: PersistedPreset[] = state.presets.map(
           (p: PersistedPreset) =>
@@ -124,7 +124,7 @@ export const usePresetStore = create<PresetStore>()(
         set({ ...state, presets });
       },
 
-      remove: <T extends PresetSchema>(preset: Preset<T>) => {
+      remove: <T>(preset: Preset<T>) => {
         const state = get();
         const presets = state.presets.filter(
           (p: Preset<any>) => p.id !== preset.id,

electron/src/lib/preset/usePresets.ts

@@ -3,13 +3,13 @@ import {
   machineIdentificationEquals,
 } from "@/machines/types";
 import { usePresetStore } from "./presetStore";
-import { Preset, PresetData, presetSchema, PresetSchema } from "./preset";
+import { Preset, presetSchema, PresetSchema } from "./preset";
 import { deepEquals } from "@/lib/objects";
 import { useEffect } from "react";
 import { toastError } from "@/components/Toast";
 import { z } from "zod";
 
-export type Presets<T extends PresetSchema> = {
+export type Presets<T> = {
   get: () => Preset<T>[];
   createFromCurrentState: (name: string) => Preset<T>;
   updateFromCurrentState: (preset: Preset<T>) => Preset<T>;
@@ -20,15 +20,15 @@ export type Presets<T extends PresetSchema> = {
   import: (json: any) => void;
 };
 
-export type UsePresetsParams<T extends PresetSchema> = {
+export type UsePresetsParams<T> = {
   machine_identification: MachineIdentification;
-  schemas: Map<number, T>;
+  schemas: Map<number, PresetSchema<T>>;
   schemaVersion: number;
-  currentState?: PresetData<T>;
-  defaultState?: PresetData<T>;
+  currentState?: T;
+  defaultState?: T;
 };
 
-export function usePresets<T extends PresetSchema>({
+export function usePresets<T>({
   machine_identification,
   schemas,
   schemaVersion,
@@ -49,7 +49,10 @@ export function usePresets<T extends PresetSchema>({
     }
 
     try {
-      const parsed = presetSchema(schema).parse(preset);
+      const parsed: Preset<T> = {
+        ...preset,
+        data: schema.parse(preset.data),
+      };
 
       if (parsed.schemaVersion < schemaVersion) {
         parsed.schemaVersion = schemaVersion;
@@ -93,7 +96,11 @@ export function usePresets<T extends PresetSchema>({
     return { ...preset, data: currentState };
   };
 
-  const updateFromCurrentState = (preset: Preset<T>) => {
+  const updateFromCurrentState = (preset: Preset<T>): Preset<T> => {
+    if (!currentState) {
+      return preset;
+    }
+
     const data = currentState;
 
     const newPreset = {
@@ -153,12 +160,16 @@ export function usePresets<T extends PresetSchema>({
   };
 
   const isActive = (preset: Preset<T>) => {
-    return deepEquals(currentState, preset.data);
+    if (!currentState) {
+      return false;
+    }
+
+    return deepEquals(currentState, preset.data ?? {});
   };
 
   const importPreset = (json: any) => {
     try {
-      const anyPreset = presetSchema(z.any()).parse(json);
+      const anyPreset = presetSchema(z.object()).parse(json);
 
       if (
         !machineIdentificationEquals(

electron/src/lib/types.ts

@@ -1,38 +1,17 @@
 import { z } from "zod";
 
-/**
- * Creates a Zod schema for objects where exactly one property must be defined.
- * This is useful for handling Rust enum JSON representations where only one variant exists at a time.
- *
- * @param schemas A record mapping property names to their Zod schemas
- * @returns A Zod schema that validates that exactly one property is defined
- */
-export function rustEnumSchema<T extends Record<string, z.ZodType>>(
-  schemas: T,
-): z.ZodType<{ [K in keyof T]?: z.infer<T[K]> }> {
-  // Create an object schema where all properties are optional
-  const schemaEntries = Object.entries(schemas).map(([key, schema]) => [
-    key,
-    schema.optional(),
-  ]);
-
-  const objectSchema = z.object(
-    Object.fromEntries(schemaEntries) as {
-      [K in keyof T]: z.ZodOptional<T[K]>;
-    },
+export const rustEnum: z.core.CheckFn<object> = (ctx) => {
+  const definedKeys = Object.keys(ctx.value).filter(
+    (key) => ctx.value[key] !== undefined,
   );
 
-  // Add refinement to ensure exactly one property is defined
-  return objectSchema.refine(
-    (data) => {
-      const definedKeys = Object.keys(data).filter(
-        (key) => data[key] !== undefined,
-      );
-      return definedKeys.length === 1;
-    },
-    {
-      message: "Exactly one property must be defined",
-      path: ["_exclusive"], // Add a path to help with error identification
-    },
-  );
-}
+  if (definedKeys.length === 1) {
+    return;
+  }
+
+  ctx.issues.push({
+    code: "custom",
+    message: "Exactly one property must be defined",
+    input: definedKeys,
+  });
+};

electron/src/lib/validation.ts

@@ -1,19 +0,0 @@
-import { z } from "zod";
-
-// super refine function to validate if a string is a valid u16 number
-export function validateU16<T>(): (value: T, ctx: z.RefinementCtx) => boolean {
-  const refine = (value: T, ctx: z.RefinementCtx) => {
-    console.log("value", value);
-    if (typeof value === "string") {
-      const number = parseInt(value, 10);
-      if (number < 0 || number > 65535) {
-        ctx.addIssue({
-          code: z.ZodIssueCode.custom,
-          message: "Wert muss u16 integer sein",
-        });
-      }
-    }
-    return true;
-  };
-  return refine;
-}

electron/src/machines/aquapath/aquapath1/Aquapath1ControlPage.tsx

@@ -6,7 +6,10 @@ import { TimeSeriesValueNumeric } from "@/control/TimeSeriesValue";
 import { useAquapath1 } from "./useAquapath";
 import { SelectionGroup } from "@/control/SelectionGroup";
 import { EditValue } from "@/control/EditValue";
+import { Badge } from "@/components/ui/badge";
 import { Label } from "@/control/Label";
+import { HeatingZone } from "../../extruder/HeatingZone";
+import { StatusBadge } from "@/control/StatusBadge";
 
 export function Aquapath1ControlPage() {
   const {
@@ -16,8 +19,12 @@ export function Aquapath1ControlPage() {
     back_flow,
     front_temperature,
     back_temperature,
-    front_temp_reservoir,
-    back_temp_reservoir,
+    front_revolutions,
+    back_revolutions,
+    front_power,
+    back_power,
+    front_total_energy,
+    back_total_energy,
     setAquapathMode,
     setFrontTemperature,
     setBackTemperature,
@@ -29,111 +36,53 @@ export function Aquapath1ControlPage() {
   const backTargetTemperature =
     state?.temperature_states?.back.target_temperature ?? 0;
 
+  const frontCurrentTemperature =
+    state?.temperature_states?.front.temperature ?? 0;
+  const backCurrentTemperature =
+    state?.temperature_states?.back.temperature ?? 0;
+
+  const frontCoolingBoundary =
+    frontTargetTemperature + (state?.tolerance_states.front.cooling ?? 0);
+  const frontHeatingBoundary =
+    frontTargetTemperature - (state?.tolerance_states.front.heating ?? 0);
+  const backCoolingBoundary =
+    backTargetTemperature + (state?.tolerance_states.back.cooling ?? 0);
+  const backHeatingBoundary =
+    backTargetTemperature - (state?.tolerance_states.back.heating ?? 0);
+
   const frontTargetFlow = state?.flow_states.front.should_flow ?? false;
   const backTargetFlow = state?.flow_states.back.should_flow ?? false;
-
+  console.log(state);
   return (
     <Page>
       <ControlGrid columns={2}>
-        <ControlCard title="Flow Measurements">
-          <div className="grid grid-cols-2 gap-6">
-            <div className="flex flex-col gap-8">
-              <TimeSeriesValueNumeric
-                label="Flow 1"
-                unit="l/min"
-                timeseries={front_flow}
-                renderValue={(value) => value.toFixed(1)}
-              />
+        <ControlCard title="Reservoir 1">
+          <div className="grid grid-rows-5 gap-4">
+            <div className="flex flex-row">
+              { state?.front_flow === true ? (
+            <StatusBadge variant="success">Flow: active</StatusBadge>
+            ) : (
+            <StatusBadge variant="error">Flow: inactive</StatusBadge>
+            )}
             </div>
-
-            <div className="flex flex-col gap-8">
+            <div className="flex flex-row">
               <TimeSeriesValueNumeric
-                label="Flow 2"
-                unit="l/min"
-                timeseries={back_flow}
-                renderValue={(value) => value.toFixed(1)}
-              />
-            </div>
-          </div>
-
-          <div className="mt-8">
-            <Label label="Pump 1">
-              <SelectionGroup<"On" | "Off">
-                value={frontTargetFlow ? "On" : "Off"}
-                orientation="vertical"
-                className="grid h-full grid-cols-2 gap-2"
-                options={{
-                  Off: {
-                    children: "Off",
-                    icon: "lu:CirclePause",
-                    isActiveClassName: "bg-green-600",
-                    className: "h-full",
-                  },
-                  On: {
-                    children: "On",
-                    icon: "lu:CirclePlay",
-                    isActiveClassName: "bg-green-600",
-                    className: "h-full",
-                  },
-                }}
-                onChange={(value) => {
-                  if (value == "On") {
-                    setFrontFlow(true);
-                  } else {
-                    setFrontFlow(false);
-                  }
-                }}
-              />
-            </Label>
-
-            <Label label="Pump 2">
-              <SelectionGroup<"On" | "Off">
-                value={backTargetFlow ? "On" : "Off"}
-                orientation="vertical"
-                className="grid h-full grid-cols-2 gap-2"
-                options={{
-                  Off: {
-                    children: "Off",
-                    icon: "lu:CirclePause",
-                    isActiveClassName: "bg-green-600",
-                    className: "h-full",
-                  },
-                  On: {
-                    children: "On",
-                    icon: "lu:CirclePlay",
-                    isActiveClassName: "bg-green-600",
-                    className: "h-full",
-                  },
-                }}
-                onChange={(value) => {
-                  if (value == "On") {
-                    setBackFlow(true);
-                  } else {
-                    setBackFlow(false);
-                  }
-                }}
-              />
-            </Label>
-          </div>
-        </ControlCard>
-
-        <ControlCard title="Temperature Measurements">
-          <div className="grid grid-cols-2 gap-6">
-            <div className="flex flex-col gap-8">
-              <TimeSeriesValueNumeric
-                label="Reservoir 1"
+                label="Temperature"
                 unit="C"
                 timeseries={front_temperature}
                 renderValue={(value) => value.toFixed(1)}
               />
-              <Label label="Set Reservoir 1 Target Temperature">
+            </div>
+
+            <div className="flex flex-row gap-4">
+              <Label label="Set Target Temperature">
                 <EditValue
-                  title="Set Reservoir 1 Target Temperature"
+                  title="Set Target Temperature"
+                  min={0}
                   value={frontTargetTemperature}
+                  max={80}
                   unit="C"
                   step={0.1}
-                  min={0.0}
-                  max={80.0}
                   renderValue={(value) => value.toFixed(1)}
                   onChange={(val) => {
                     setFrontTemperature(val);
@@ -143,23 +92,88 @@ export function Aquapath1ControlPage() {
                   }
                 />
               </Label>
+
+              {frontCurrentTemperature < frontHeatingBoundary &&
+                (state?.flow_states.front.flow ?? 0) > 0 && (
+                  <Badge variant="default">
+                    Power: {front_power.current?.value} W<br />
+                    Total: {front_total_energy.current?.value} kWh
+                  </Badge>
+                )}
+              {frontCurrentTemperature > frontCoolingBoundary &&
+                frontTargetFlow &&
+                (state?.flow_states.front.flow ?? 0) && (
+                  <Badge variant="secondary">Cooling</Badge>
+                )}
             </div>
 
-            <div className="flex flex-col gap-8">
+            <div className="flex flex-row">
               <TimeSeriesValueNumeric
-                label="Reservoir 2"
+                label="Revolution Speed"
+                unit="%"
+                timeseries={front_revolutions}
+                renderValue={(value) => value.toFixed(1)}
+              />
+            </div>
+
+            <div className="flex flex-row">
+              <Label label="Pump">
+                <SelectionGroup<"On" | "Off">
+                  value={frontTargetFlow ? "On" : "Off"}
+                  orientation="vertical"
+                  className="grid h-full grid-cols-2 gap-2"
+                  options={{
+                    Off: {
+                      children: "Off",
+                      icon: "lu:CirclePause",
+                      isActiveClassName: "bg-green-600",
+                      className: "h-full",
+                    },
+                    On: {
+                      children: "On",
+                      icon: "lu:CirclePlay",
+                      isActiveClassName: "bg-green-600",
+                      className: "h-full",
+                    },
+                  }}
+                  onChange={(value) => {
+                    setFrontFlow(value == "On");
+                  }}
+                />
+              </Label>
+            </div>
+          </div>
+        </ControlCard>
+
+        <ControlCard title="Reservoir 2">
+          <div className="grid grid-rows-4 gap-4">
+            <div className="flex flex-row">
+                <div className="flex flex-row">
+                  { state?.back_flow === true ? (
+                  <StatusBadge variant="success">Flow: active</StatusBadge>
+                  ) : (
+                  <StatusBadge variant="error">Flow: inactive</StatusBadge>
+                  )}
+              </div></div>
+
+            <div className="flex flex-row">
+              <TimeSeriesValueNumeric
+                label="Temperature"
                 unit="C"
                 timeseries={back_temperature}
                 renderValue={(value) => value.toFixed(1)}
               />
-              <Label label="Set Reservoir 2 Target Temperature">
+            </div>
+
+            <div className="flex flex-row gap-4">
+              <Label label="Set Target Temperature">
                 <EditValue
-                  title="Set Reservoir 2 Target Temperature"
+                  title="Set Target Temperature"
+                  min={0}
                   value={backTargetTemperature}
+                  max={80}
                   unit="C"
                   step={0.1}
-                  min={0.0}
-                  max={80.0}
                   renderValue={(value) => value.toFixed(1)}
                   onChange={(val) => {
                     setBackTemperature(val);
@@ -169,6 +183,56 @@ export function Aquapath1ControlPage() {
                   }
                 />
               </Label>
+
+              {backCurrentTemperature < backHeatingBoundary &&
+                backTargetFlow &&
+                (state?.flow_states.front.flow ?? 0) && (
+                  <Badge variant="default">
+                    Power: {back_power.current?.value} W<br />
+                    Total: {back_total_energy.current?.value} kWh
+                  </Badge>
+                )}
+              {backCurrentTemperature > backCoolingBoundary &&
+                frontTargetFlow &&
+                (state?.flow_states.front.flow ?? 0) && (
+                  <Badge variant="secondary">Cooling</Badge>
+                )}
+            </div>
+
+            <div className="flex flex-row">
+              <TimeSeriesValueNumeric
+                label="Revolution Speed"
+                unit="%"
+                timeseries={back_revolutions}
+                renderValue={(value) => value.toFixed(1)}
+              />
+            </div>
+
+            <div className="flex flex-row">
+              <Label label="Pump">
+                <SelectionGroup<"On" | "Off">
+                  value={backTargetFlow ? "On" : "Off"}
+                  orientation="vertical"
+                  className="grid h-full grid-cols-2 gap-2"
+                  options={{
+                    Off: {
+                      children: "Off",
+                      icon: "lu:CirclePause",
+                      isActiveClassName: "bg-green-600",
+                      className: "h-full",
+                    },
+                    On: {
+                      children: "On",
+                      icon: "lu:CirclePlay",
+                      isActiveClassName: "bg-green-600",
+                      className: "h-full",
+                    },
+                  }}
+                  onChange={(value) => {
+                    setBackFlow(value == "On");
+                  }}
+                />
+              </Label>
             </div>
           </div>
         </ControlCard>

electron/src/machines/aquapath/aquapath1/Aquapath1Page.tsx

@@ -14,11 +14,17 @@ export function Aquapath1Page() {
           title: "Control",
           icon: "lu:CirclePlay",
         },
+        //{
+//          link: "graph",
+          //title: "Graph",
+          //icon: "lu:ChartSpline",
+          //activeLink: "graphs",
+        //},
         {
-          link: "graph",
-          title: "Graph",
-          icon: "lu:ChartSpline",
-          activeLink: "graphs",
+          link: "settings",
+          title: "Config",
+          icon: "lu:Settings",
+          activeLink: "settings",
         },
       ]}
     />

electron/src/machines/aquapath/aquapath1/Aquapath1Settings.tsx

@@ -0,0 +1,121 @@
+import { Page } from "@/components/Page";
+import { ControlCard } from "@/control/ControlCard";
+import { ControlGrid } from "@/control/ControlGrid";
+import { EditValue } from "@/control/EditValue";
+import { Label } from "@/control/Label";
+import { useAquapath1 } from "./useAquapath";
+import React from "react";
+
+export function Aquapath1SettingsPage() {
+  const {
+    state,
+    setFrontRevolutions,
+    setBackRevolutions,
+    setFrontHeatingTolerance,
+    setFrontCoolingTolerance,
+    setBackHeatingTolerance,
+    setBackCoolingTolerance,
+  } = useAquapath1();
+
+  return (
+    <Page>
+      <ControlGrid columns={2}>
+        <ControlCard title="Front Fan Revolutions">
+          <Label label="Set Max Revolution Speed">
+            <EditValue
+              title="Set Max Revolution Speed"
+              min={0}
+              value={state?.fan_states.front.revolutions}
+              max={100}
+              unit="%"
+              renderValue={(value) => value.toFixed(1)}
+              onChange={(val) => {
+                setFrontRevolutions(val);
+              }}
+            />
+          </Label>
+        </ControlCard>
+
+        <ControlCard title="Back Fan Revolutions">
+          <Label label="Set Max Revolution Speed">
+            <EditValue
+              title="Set Max Revolution Speed"
+              min={0}
+              value={state?.fan_states.back.revolutions}
+              max={100}
+              unit="%"
+              renderValue={(value) => value.toFixed(1)}
+              onChange={(val) => {
+                setBackRevolutions(val);
+              }}
+            />
+          </Label>
+        </ControlCard>
+
+        <ControlCard title="Front Temperature Tolerances">
+          <Label label="Set Heating Tolerance">
+            <EditValue
+              title="Set Heating Tolerance"
+              min={0}
+              value={state?.tolerance_states.front.heating}
+              max={10}
+              step={0.1}
+              unit="C"
+              renderValue={(value) => value.toFixed(1)}
+              onChange={(val) => {
+                setFrontHeatingTolerance(val);
+              }}
+            />
+          </Label>
+
+          <Label label="Set Cooling Tolerance">
+            <EditValue
+              title="Set Cooling Tolerance"
+              min={0}
+              value={state?.tolerance_states.front.cooling}
+              max={10}
+              step={0.1}
+              unit="C"
+              renderValue={(value) => value.toFixed(1)}
+              onChange={(val) => {
+                setFrontCoolingTolerance(val);
+              }}
+            />
+          </Label>
+        </ControlCard>
+
+        <ControlCard title="Back Temperature Tolerances">
+          <Label label="Set Heating Tolerance">
+            <EditValue
+              title="Set Heating Tolerance"
+              min={0}
+              value={state?.tolerance_states.back.heating}
+              max={10}
+              step={0.1}
+              unit="C"
+              renderValue={(value) => value.toFixed(1)}
+              onChange={(val) => {
+                setBackHeatingTolerance(val);
+              }}
+            />
+          </Label>
+
+          <Label label="Set Cooling Tolerance">
+            <EditValue
+              title="Set Cooling Tolerance"
+              min={0}
+              value={state?.tolerance_states.back.cooling}
+              max={10}
+              step={0.1}
+              unit="C"
+              renderValue={(value) => value.toFixed(1)}
+              onChange={(val) => {
+                setBackCoolingTolerance(val);
+              }}
+            />
+          </Label>
+        </ControlCard>
+      </ControlGrid>
+    </Page>
+  );
+}

electron/src/machines/aquapath/aquapath1/aquapath1Namespace.ts

@@ -51,16 +51,37 @@ export const flowStatesSchema = z.object({
   back: flowStateSchema,
 });
 
+export const fanStateSchema = z.object({
+  revolutions: z.number(),
+  max_revolutions: z.number(),
+});
+export const fanStatesSchema = z.object({
+  back: fanStateSchema,
+  front: fanStateSchema,
+});
+
+export const toleranceStateSchema = z.object({
+  heating: z.number(),
+  cooling: z.number(),
+});
+export const toleranceStatesSchema = z.object({
+  back: toleranceStateSchema,
+  front: toleranceStateSchema,
+});
 /**
  * Live values event schema (time-series data)
  */
 export const liveValuesEventDataSchema = z.object({
-  front_flow: z.number(),
-  back_flow: z.number(),
   front_temperature: z.number(),
   back_temperature: z.number(),
   front_temp_reservoir: z.number(),
   back_temp_reservoir: z.number(),
+  front_revolutions: z.number(),
+  back_revolutions: z.number(),
+  back_power: z.number(),
+  front_power: z.number(),
+  front_total_energy: z.number(),
+  back_total_energy: z.number(),
 });
 
 /**
@@ -71,6 +92,10 @@ export const stateEventDataSchema = z.object({
   mode_state: modeStateSchema,
   flow_states: flowStatesSchema,
   temperature_states: tempStatesSchema,
+  fan_states: fanStatesSchema,
+  tolerance_states: toleranceStatesSchema,
+  front_flow: z.boolean(),
+  back_flow: z.boolean(),
 });
 
 // ========== Event Schemas with Wrappers ==========
@@ -88,14 +113,20 @@ export type Aquapath1NamespaceStore = {
   state: StateEvent | null;
   defaultState: StateEvent | null;
 
-  front_flow: TimeSeries;
-  back_flow: TimeSeries;
-
   front_temperature: TimeSeries;
   back_temperature: TimeSeries;
 
   front_temp_reservoir: TimeSeries;
   back_temp_reservoir: TimeSeries;
+
+  front_revolutions: TimeSeries;
+  back_revolutions: TimeSeries;
+
+  front_power: TimeSeries;
+  back_power: TimeSeries;
+
+  front_total_energy: TimeSeries;
+  back_total_energy: TimeSeries;
 };
 
 const { initialTimeSeries: front_temperature, insert: addTemperature1 } =
@@ -108,6 +139,18 @@ const { initialTimeSeries: back_temp_reservoir, insert: addTempReserv2 } =
   createTimeSeries();
 const { initialTimeSeries: front_flow, insert: addFlow1 } = createTimeSeries();
 const { initialTimeSeries: back_flow, insert: addFlow2 } = createTimeSeries();
+const { initialTimeSeries: front_revolutions, insert: addFan1 } =
+  createTimeSeries();
+const { initialTimeSeries: back_revolutions, insert: addFan2 } =
+  createTimeSeries();
+const { initialTimeSeries: front_power, insert: addFrontPower } =
+  createTimeSeries();
+const { initialTimeSeries: back_power, insert: addBackPower } =
+  createTimeSeries();
+const { initialTimeSeries: front_total_energy, insert: addFrontEnergy } =
+  createTimeSeries();
+const { initialTimeSeries: back_total_energy, insert: addBackEnergy } =
+  createTimeSeries();
 
 /**
  * Factory function to create a new Aquapath namespace store
@@ -125,6 +168,12 @@ export const createAquapath1NamespaceStore =
         back_flow: back_flow,
         front_temp_reservoir: front_temp_reservoir,
         back_temp_reservoir: back_temp_reservoir,
+        front_revolutions: front_revolutions,
+        back_revolutions: back_revolutions,
+        back_power: back_power,
+        front_power: front_power,
+        front_total_energy: front_total_energy,
+        back_total_energy: back_total_energy,
       };
     });
   };
@@ -165,7 +214,7 @@ export function aquapath1MessageHandler(
       // Live values events (time-series data)
       else if (eventName === "LiveValuesEvent") {
         const liveValuesEvent = liveValuesEventSchema.parse(event);
-
+        console.log(liveValuesEvent);
         updateStore((state) => ({
           ...state,
           front_temperature: addTemperature1(state.front_temperature, {
@@ -192,6 +241,30 @@ export function aquapath1MessageHandler(
             value: liveValuesEvent.data.back_temp_reservoir,
             timestamp: event.ts,
           }),
+          front_revolutions: addFan1(state.front_revolutions, {
+            value: liveValuesEvent.data.front_revolutions,
+            timestamp: event.ts,
+          }),
+          back_revolutions: addFan2(state.back_revolutions, {
+            value: liveValuesEvent.data.back_revolutions,
+            timestamp: event.ts,
+          }),
+          front_power: addFrontPower(state.front_power, {
+            value: liveValuesEvent.data.front_power,
+            timestamp: event.ts,
+          }),
+          back_power: addBackPower(state.back_power, {
+            value: liveValuesEvent.data.back_power,
+            timestamp: event.ts,
+          }),
+          front_total_energy: addFrontEnergy(state.front_total_energy, {
+            value: liveValuesEvent.data.front_total_energy,
+            timestamp: event.ts,
+          }),
+          back_total_energy: addBackEnergy(state.back_total_energy, {
+            value: liveValuesEvent.data.back_total_energy,
+            timestamp: event.ts,
+          }),
         }));
       } else {
         handleUnhandledEventError(eventName);

electron/src/machines/aquapath/aquapath1/useAquapath.ts

@@ -42,12 +42,18 @@ export function useAquapath1() {
   const {
     state,
     defaultState,
-    front_temperature: front_temperature,
-    back_temperature: back_temperature,
-    front_flow: front_flow,
-    back_flow: back_flow,
-    front_temp_reservoir: front_temp_reservoir,
-    back_temp_reservoir: back_temp_reservoir,
+    front_temperature,
+    back_temperature,
+    front_flow,
+    back_flow,
+    front_temp_reservoir,
+    back_temp_reservoir,
+    front_revolutions,
+    back_revolutions,
+    front_power,
+    back_power,
+    front_total_energy,
+    back_total_energy,
   } = useAquapath1Namespace(machineIdentification);
 
   // Single optimistic state for all state management
@@ -125,6 +131,89 @@ export function useAquapath1() {
     );
   };
 
+  const setFrontRevolutions = (revolutions: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.fan_states.back.revolutions = revolutions;
+      },
+      () => {
+        requestFrontRevolutions({
+          machine_identification_unique: machineIdentification,
+          data: { SetFrontRevolutions: revolutions },
+        });
+      },
+    );
+  };
+
+  const setBackRevolutions = (revolutions: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.fan_states.back.revolutions = revolutions;
+      },
+      () =>
+        requestBackRevolutions({
+          machine_identification_unique: machineIdentification,
+          data: { SetBackRevolutions: revolutions },
+        }),
+    );
+  };
+
+  const setFrontHeatingTolerance = (tolerance: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.tolerance_states.front.heating = tolerance;
+      },
+      () => {
+        requestFrontHeatingTolerance({
+          machine_identification_unique: machineIdentification,
+          data: { SetFrontHeatingTolerance: tolerance },
+        });
+      },
+    );
+  };
+
+  const setBackHeatingTolerance = (tolerance: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.tolerance_states.back.heating = tolerance;
+      },
+      () => {
+        requestBackHeatingTolerance({
+          machine_identification_unique: machineIdentification,
+          data: { SetBackHeatingTolerance: tolerance },
+        });
+      },
+    );
+  };
+
+  const setFrontCoolingTolerance = (tolerance: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.tolerance_states.front.cooling = tolerance;
+      },
+      () => {
+        requestFrontCoolingTolerance({
+          machine_identification_unique: machineIdentification,
+          data: { SetFrontCoolingTolerance: tolerance },
+        });
+      },
+    );
+  };
+
+  const setBackCoolingTolerance = (tolerance: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.tolerance_states.back.cooling = tolerance;
+      },
+      () => {
+        requestBackCoolingTolerance({
+          machine_identification_unique: machineIdentification,
+          data: { SetBackCoolingTolerance: tolerance },
+        });
+      },
+    );
+  };
+
   // Mutation hooks
   const { request: requestAquapathMode } = useMachineMutation(
     z.object({ SetAquaPathMode: z.enum(["Standby", "Auto"]) }),
@@ -141,6 +230,25 @@ export function useAquapath1() {
   const { request: requestBackFlow } = useMachineMutation(
     z.object({ SetBackFlow: z.boolean() }),
   );
+  const { request: requestFrontRevolutions } = useMachineMutation(
+    z.object({ SetFrontRevolutions: z.number() }),
+  );
+  const { request: requestBackRevolutions } = useMachineMutation(
+    z.object({ SetBackRevolutions: z.number() }),
+  );
+  const { request: requestFrontHeatingTolerance } = useMachineMutation(
+    z.object({ SetFrontHeatingTolerance: z.number() }),
+  );
+  const { request: requestFrontCoolingTolerance } = useMachineMutation(
+    z.object({ SetFrontCoolingTolerance: z.number() }),
+  );
+  const { request: requestBackHeatingTolerance } = useMachineMutation(
+    z.object({ SetBackHeatingTolerance: z.number() }),
+  );
+  const { request: requestBackCoolingTolerance } = useMachineMutation(
+    z.object({ SetBackCoolingTolerance: z.number() }),
+  );
+
   // Helper function for optimistic updates using produce
   const updateStateOptimistically = (
     producer: (current: StateEvent) => void,
@@ -165,11 +273,23 @@ export function useAquapath1() {
     back_temperature,
     front_temp_reservoir,
     back_temp_reservoir,
+    front_revolutions,
+    back_revolutions,
+    front_power,
+    back_power,
+    front_total_energy,
+    back_total_energy,
 
     setAquapathMode,
     setFrontTemperature,
     setBackTemperature,
     setFrontFlow,
     setBackFlow,
+    setFrontRevolutions,
+    setBackRevolutions,
+    setFrontHeatingTolerance,
+    setBackHeatingTolerance,
+    setFrontCoolingTolerance,
+    setBackCoolingTolerance,
   };
 }

electron/src/machines/digitalinputtestmachine/DigitalInputTestMachineControlPage.tsx

@@ -0,0 +1,31 @@
+import { ControlCard } from "@/control/ControlCard";
+import { Page } from "@/components/Page";
+import React from "react";
+import { Label } from "@/control/Label";
+import { useDigitalInputTestMachine } from "./useDigitalInputTestMachine";
+import { Badge } from "@/components/ui/badge";
+import { ControlGrid } from "@/control/ControlGrid";
+import { SelectionGroup } from "@/control/SelectionGroup";
+import { toastError } from "@/components/Toast";
+
+export function DigitalInputTestMachineControlPage() {
+  const { state } = useDigitalInputTestMachine();
+
+  const safeState = state ?? { led_on: [false, false, false, false] };
+
+  return (
+    <Page>
+      <ControlCard title="Machine LEDs">
+        <div className="grid grid-cols-2 gap-6">
+          {safeState.led_on.map((led, index) => (
+            <Label key={index} label={`LED ${index + 1}`}>
+              <Badge variant={led ? "outline" : "destructive"}>
+                {led ? "On" : "OFF"}
+              </Badge>
+            </Label>
+          ))}
+        </div>
+      </ControlCard>
+    </Page>
+  );
+}

electron/src/machines/digitalinputtestmachine/DigitalInputTestMachinePage.tsx

@@ -0,0 +1,20 @@
+import { Topbar } from "@/components/Topbar";
+import { digitalInputTestMachineSerialRoute } from "@/routes/routes";
+import React from "react";
+
+export function DigitalInputTestMachinePage() {
+  const { serial } = digitalInputTestMachineSerialRoute.useParams();
+  return (
+    <Topbar
+      pathname={`/_sidebar/machines/digitalInputTestMachine/${serial}`}
+      items={[
+        {
+          link: "control",
+          activeLink: "control",
+          title: "Control",
+          icon: "lu:CirclePlay",
+        },
+      ]}
+    />
+  );
+}

electron/src/machines/digitalinputtestmachine/digitalInputTestMachineNamespace.ts

@@ -0,0 +1,78 @@
+import { StoreApi } from "zustand";
+import { create } from "zustand";
+import { z } from "zod";
+import {
+  EventHandler,
+  eventSchema,
+  Event,
+  handleUnhandledEventError,
+  NamespaceId,
+  createNamespaceHookImplementation,
+  ThrottledStoreUpdater,
+} from "@/client/socketioStore";
+import { MachineIdentificationUnique } from "@/machines/types";
+
+// ========== Event Schema ==========
+
+export const stateEventDataSchema = z.object({
+  led_on: z.array(z.boolean()).length(4),
+});
+
+export const stateEventSchema = eventSchema(stateEventDataSchema);
+
+export type StateEvent = z.infer<typeof stateEventDataSchema>;
+
+// ========== Store ==========
+export type DigitalTestMachineNamespaceStore = {
+  state: StateEvent | null;
+};
+
+export const createTestMachineNamespaceStore =
+  (): StoreApi<DigitalTestMachineNamespaceStore> =>
+    create<DigitalTestMachineNamespaceStore>(() => ({
+      state: null,
+    }));
+
+// ========== Message Handler ==========
+export function digitalInputTestMachineMessageHandler(
+  store: StoreApi<DigitalTestMachineNamespaceStore>,
+  throttledUpdater: ThrottledStoreUpdater<DigitalTestMachineNamespaceStore>,
+): EventHandler {
+  return (event: Event<any>) => {
+    const updateStore = (
+      updater: (
+        state: DigitalTestMachineNamespaceStore,
+      ) => DigitalTestMachineNamespaceStore,
+    ) => throttledUpdater.updateWith(updater);
+
+    try {
+      if (event.name === "StateEvent") {
+        const parsed = stateEventSchema.parse(event);
+        updateStore(() => ({ state: parsed.data }));
+      } else {
+        handleUnhandledEventError(event.name);
+      }
+    } catch (error) {
+      console.error(`Error processing ${event.name}:`, error);
+      throw error;
+    }
+  };
+}
+
+// ========== Namespace Hook ==========
+const useDigitalInputTestMachineNamespaceImplementation =
+  createNamespaceHookImplementation<DigitalTestMachineNamespaceStore>({
+    createStore: createTestMachineNamespaceStore,
+    createEventHandler: digitalInputTestMachineMessageHandler,
+  });
+
+export function useDigitalInputTestMachineNamespace(
+  machine_identification_unique: MachineIdentificationUnique,
+): DigitalTestMachineNamespaceStore {
+  const namespaceId: NamespaceId = {
+    type: "machine",
+    machine_identification_unique,
+  };
+
+  return useDigitalInputTestMachineNamespaceImplementation(namespaceId);
+}

electron/src/machines/digitalinputtestmachine/useDigitalInputTestMachine.ts

@@ -0,0 +1,53 @@
+import { Toast, toastError } from "@/components/Toast";
+import { useStateOptimistic } from "@/lib/useStateOptimistic";
+import { digitalInputTestMachineSerialRoute } from "@/routes/routes";
+import { MachineIdentificationUnique } from "@/machines/types";
+import {
+  useDigitalInputTestMachineNamespace,
+  StateEvent,
+} from "./digitalInputTestMachineNamespace";
+import { useMachineMutate } from "@/client/useClient";
+import { produce } from "immer";
+import { useEffect, useMemo } from "react";
+import { digitalInputTestMachine } from "@/machines/properties";
+import { z } from "zod";
+export function useDigitalInputTestMachine() {
+  const { serial: serialString } =
+    digitalInputTestMachineSerialRoute.useParams();
+
+  // Memoize machine identification
+  const machineIdentification: MachineIdentificationUnique = useMemo(() => {
+    const serial = parseInt(serialString);
+
+    if (isNaN(serial)) {
+      toastError(
+        "Invalid Serial Number",
+        `"${serialString}" is not a valid serial number.`,
+      );
+
+      return {
+        machine_identification: { vendor: 0, machine: 0 },
+        serial: 0,
+      };
+    }
+
+    return {
+      machine_identification: digitalInputTestMachine.machine_identification,
+      serial,
+    };
+  }, [serialString]);
+
+  // Namespace state from backend
+  const { state } = useDigitalInputTestMachineNamespace(machineIdentification);
+
+  // Optimistic state
+  const stateOptimistic = useStateOptimistic<StateEvent>();
+
+  useEffect(() => {
+    if (state) stateOptimistic.setReal(state);
+  }, [state, stateOptimistic]);
+
+  return {
+    state: stateOptimistic.value,
+  };
+}

electron/src/machines/extruder/extruder2/Extruder2Manual.tsx

@@ -1,15 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import extruderManualContent from "@root/docs/machines/manuals/extruder.md?raw";
+import extruderManualContent from "@/assets/markdown/extruder/manual.md?raw";
 
 export function ExtruderV2ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc
-        markdownContent={extruderManualContent}
-        isManual={true}
-      />
+      <MarkdownWithToc markdownContent={extruderManualContent} />
     </Page>
   );
 }

electron/src/machines/extruder/extruder2/Extruder2PresetsPage.tsx

@@ -7,7 +7,7 @@ import {
   PresetPreviewEntries,
   previewSeparator,
 } from "@/components/preset/PresetPreviewTable";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 
 const extruder1PresetDataSchema = z
   .object({
@@ -31,7 +31,7 @@ const extruder1PresetDataSchema = z
   })
   .partial();
 
-type Extruder2 = typeof extruder1PresetDataSchema;
+type Extruder2 = z.infer<typeof extruder1PresetDataSchema>;
 
 const schemas = new Map([[1, extruder1PresetDataSchema]]);
 
@@ -39,76 +39,69 @@ const previewEntries: PresetPreviewEntries<Extruder2> = [
   {
     name: "Target Front Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetFrontHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Middle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetMiddleHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Back Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetBackHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Nozzle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetNozzleHeatingTemperature?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Inverter Regulation",
-    renderValue: (data: PresetData<Extruder2>) => data.inverterRegulation,
+    renderValue: (data: Extruder2) => data.inverterRegulation,
   },
   {
     name: "Target Inverter RPM",
     unit: "rpm",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.targetInverterRpm?.toFixed(2),
+    renderValue: (data: Extruder2) => data.targetInverterRpm?.toFixed(2),
   },
   {
     name: "Target Inverter Pressure",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.targetInverterPressure?.toFixed(1),
+    renderValue: (data: Extruder2) => data.targetInverterPressure?.toFixed(1),
   },
   {
     name: "Inverter Direction",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.inverterRotationDirection,
+    renderValue: (data: Extruder2) => data.inverterRotationDirection,
   },
   previewSeparator,
   {
     name: "Pressure Limit",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pressureLimit?.toFixed(1),
+    renderValue: (data: Extruder2) => data.pressureLimit?.toFixed(1),
   },
   {
     name: "Enable Pressure Limit",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.pressureLimitEnabled ? "on" : "off",
   },
   previewSeparator,
   {
     name: "PID Pressue Kp",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pidPressureKp?.toFixed(4),
+    renderValue: (data: Extruder2) => data.pidPressureKp?.toFixed(4),
   },
   {
     name: "PID Pressue Ki",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pidPressureKi?.toFixed(4),
+    renderValue: (data: Extruder2) => data.pidPressureKi?.toFixed(4),
   },
   {
     name: "PID Pressue Kd",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pidPressureKd?.toFixed(4),
+    renderValue: (data: Extruder2) => data.pidPressureKd?.toFixed(4),
   },
 ];
 
@@ -135,7 +128,7 @@ export function Extruder2PresetsPage() {
     setPressurePidKp,
   } = useExtruder2();
 
-  const toPresetData = (s?: typeof state): PresetData<Extruder2> => ({
+  const toPresetData = (s?: typeof state): Extruder2 => ({
     targetFrontHeatingTemperature: s?.heating_states.front.target_temperature,
     targetMiddleHeatingTemperature: s?.heating_states.middle.target_temperature,
     targetBackHeatingTemperature: s?.heating_states.back.target_temperature,
@@ -161,32 +154,32 @@ export function Extruder2PresetsPage() {
 
   const applyPreset = (preset: Preset<Extruder2>) => {
     setFrontHeatingTemperature(
-      preset.data.targetFrontHeatingTemperature ?? 150.0,
+      preset?.data?.targetFrontHeatingTemperature ?? 150.0,
     );
     setMiddleHeatingTemperature(
-      preset.data.targetMiddleHeatingTemperature ?? 150.0,
+      preset?.data?.targetMiddleHeatingTemperature ?? 150.0,
     );
     setBackHeatingTemperature(
-      preset.data.targetBackHeatingTemperature ?? 150.0,
+      preset?.data?.targetBackHeatingTemperature ?? 150.0,
     );
     setNozzleHeatingTemperature(
-      preset.data.targetNozzleHeatingTemperature ?? 150.0,
+      preset?.data?.targetNozzleHeatingTemperature ?? 150.0,
     );
 
-    setInverterTargetRpm(preset.data.targetInverterRpm ?? 0);
-    setInverterTargetPressure(preset.data.targetInverterPressure ?? 0);
-    setInverterRegulation(preset.data.inverterRegulation === "RPM");
+    setInverterTargetRpm(preset?.data?.targetInverterRpm ?? 0);
+    setInverterTargetPressure(preset?.data?.targetInverterPressure ?? 0);
+    setInverterRegulation(preset?.data?.inverterRegulation === "RPM");
 
     setInverterRotationDirection(
-      preset.data.inverterRotationDirection === "Forward",
+      preset?.data?.inverterRotationDirection === "Forward",
     );
 
-    setExtruderPressureLimit(preset.data.pressureLimit ?? 100.0);
-    setExtruderPressureLimitEnabled(preset.data.pressureLimitEnabled ?? true);
+    setExtruderPressureLimit(preset?.data?.pressureLimit ?? 100.0);
+    setExtruderPressureLimitEnabled(preset?.data?.pressureLimitEnabled ?? true);
 
-    setPressurePidKp(preset.data.pidPressureKp ?? 0.16);
-    setPressurePidKi(preset.data.pidPressureKi ?? 0.0);
-    setPressurePidKd(preset.data.pidPressureKd ?? 0.008);
+    setPressurePidKp(preset?.data?.pidPressureKp ?? 0.16);
+    setPressurePidKi(preset?.data?.pidPressureKi ?? 0.0);
+    setPressurePidKd(preset?.data?.pidPressureKd ?? 0.008);
   };
 
   return (

electron/src/machines/extruder/extruder3/Extruder3Manual.tsx

@@ -1,7 +1,7 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import extruderManualContent from "@root/docs/machines/manuals/extruder.md?raw";
+import extruderManualContent from "@/assets/markdown/extruder/manual.md?raw";
 
 export function ExtruderV3ManualPage() {
   return (

electron/src/machines/extruder/extruder3/Extruder3PresetsPage.tsx

@@ -7,7 +7,7 @@ import {
   PresetPreviewEntries,
   previewSeparator,
 } from "@/components/preset/PresetPreviewTable";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 
 const extruder3PresetDataSchema = z
   .object({
@@ -31,7 +31,7 @@ const extruder3PresetDataSchema = z
   })
   .partial();
 
-type Extruder3 = typeof extruder3PresetDataSchema;
+type Extruder3 = z.infer<typeof extruder3PresetDataSchema>;
 
 const schemas = new Map([[1, extruder3PresetDataSchema]]);
 
@@ -39,76 +39,69 @@ const previewEntries: PresetPreviewEntries<Extruder3> = [
   {
     name: "Target Front Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetFrontHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Middle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetMiddleHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Back Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetBackHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Nozzle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetNozzleHeatingTemperature?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Inverter Regulation",
-    renderValue: (data: PresetData<Extruder3>) => data.inverterRegulation,
+    renderValue: (data: Extruder3) => data.inverterRegulation,
   },
   {
     name: "Target Inverter RPM",
     unit: "rpm",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.targetInverterRpm?.toFixed(2),
+    renderValue: (data: Extruder3) => data.targetInverterRpm?.toFixed(2),
   },
   {
     name: "Target Inverter Pressure",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.targetInverterPressure?.toFixed(1),
+    renderValue: (data: Extruder3) => data.targetInverterPressure?.toFixed(1),
   },
   {
     name: "Inverter Direction",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.inverterRotationDirection,
+    renderValue: (data: Extruder3) => data.inverterRotationDirection,
   },
   previewSeparator,
   {
     name: "Pressure Limit",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pressureLimit?.toFixed(1),
+    renderValue: (data: Extruder3) => data.pressureLimit?.toFixed(1),
   },
   {
     name: "Enable Pressure Limit",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.pressureLimitEnabled ? "on" : "off",
   },
   previewSeparator,
   {
     name: "PID Pressue Kp",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pidPressureKp?.toFixed(4),
+    renderValue: (data: Extruder3) => data.pidPressureKp?.toFixed(4),
   },
   {
     name: "PID Pressue Ki",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pidPressureKi?.toFixed(4),
+    renderValue: (data: Extruder3) => data.pidPressureKi?.toFixed(4),
   },
   {
     name: "PID Pressue Kd",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pidPressureKd?.toFixed(4),
+    renderValue: (data: Extruder3) => data.pidPressureKd?.toFixed(4),
   },
 ];
 
@@ -135,7 +128,7 @@ export function Extruder3PresetsPage() {
     setPressurePidKp,
   } = useExtruder3();
 
-  const toPresetData = (s?: typeof state): PresetData<Extruder3> => ({
+  const toPresetData = (s?: typeof state): Extruder3 => ({
     targetFrontHeatingTemperature: s?.heating_states.front.target_temperature,
     targetMiddleHeatingTemperature: s?.heating_states.middle.target_temperature,
     targetBackHeatingTemperature: s?.heating_states.back.target_temperature,
@@ -161,32 +154,32 @@ export function Extruder3PresetsPage() {
 
   const applyPreset = (preset: Preset<Extruder3>) => {
     setFrontHeatingTemperature(
-      preset.data.targetFrontHeatingTemperature ?? 150.0,
+      preset?.data?.targetFrontHeatingTemperature ?? 150.0,
     );
     setMiddleHeatingTemperature(
-      preset.data.targetMiddleHeatingTemperature ?? 150.0,
+      preset?.data?.targetMiddleHeatingTemperature ?? 150.0,
     );
     setBackHeatingTemperature(
-      preset.data.targetBackHeatingTemperature ?? 150.0,
+      preset?.data?.targetBackHeatingTemperature ?? 150.0,
     );
     setNozzleHeatingTemperature(
-      preset.data.targetNozzleHeatingTemperature ?? 150.0,
+      preset?.data?.targetNozzleHeatingTemperature ?? 150.0,
     );
 
-    setInverterTargetRpm(preset.data.targetInverterRpm ?? 0);
-    setInverterTargetPressure(preset.data.targetInverterPressure ?? 0);
-    setInverterRegulation(preset.data.inverterRegulation === "RPM");
+    setInverterTargetRpm(preset?.data?.targetInverterRpm ?? 0);
+    setInverterTargetPressure(preset?.data?.targetInverterPressure ?? 0);
+    setInverterRegulation(preset?.data?.inverterRegulation === "RPM");
 
     setInverterRotationDirection(
-      preset.data.inverterRotationDirection === "Forward",
+      preset?.data?.inverterRotationDirection === "Forward",
     );
 
-    setExtruderPressureLimit(preset.data.pressureLimit ?? 100.0);
-    setExtruderPressureLimitEnabled(preset.data.pressureLimitEnabled ?? true);
+    setExtruderPressureLimit(preset?.data?.pressureLimit ?? 100.0);
+    setExtruderPressureLimitEnabled(preset?.data?.pressureLimitEnabled ?? true);
 
-    setPressurePidKp(preset.data.pidPressureKp ?? 0.16);
-    setPressurePidKi(preset.data.pidPressureKi ?? 0.0);
-    setPressurePidKd(preset.data.pidPressureKd ?? 0.008);
+    setPressurePidKp(preset?.data?.pidPressureKp ?? 0.16);
+    setPressurePidKi(preset?.data?.pidPressureKi ?? 0.0);
+    setPressurePidKd(preset?.data?.pidPressureKd ?? 0.008);
   };
 
   return (

electron/src/machines/laser/laser1/Laser1Manual.tsx

@@ -1,12 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import laserManualContent from "@root/docs/machines/manuals/laser.md?raw";
+import laserManualContent from "@/assets/markdown/laser/manual.md?raw";
 
 export function Laser1ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc markdownContent={laserManualContent} isManual={true} />
+      <MarkdownWithToc markdownContent={laserManualContent} />
     </Page>
   );
 }

electron/src/machines/laser/laser1/Laser1PresetsPage.tsx

@@ -1,7 +1,7 @@
 import React from "react";
 import { z } from "zod";
 import { useLaser1 } from "./useLaser1";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import { laser1 } from "@/machines/properties";
 import { PresetPreviewEntries } from "@/components/preset/PresetPreviewTable";
 import { PresetsPage } from "@/components/preset/PresetsPage";
@@ -14,7 +14,7 @@ const laser1PresetDataSchema = z
   })
   .partial();
 
-type Laser1 = typeof laser1PresetDataSchema;
+type Laser1 = z.infer<typeof laser1PresetDataSchema>;
 
 const schemas = new Map([[1, laser1PresetDataSchema]]);
 
@@ -22,18 +22,17 @@ const previewEntries: PresetPreviewEntries<Laser1> = [
   {
     name: "Target Diameter",
     unit: "mm",
-    renderValue: (data: PresetData<Laser1>) => data?.targetDiameter?.toFixed(3),
+    renderValue: (data: Laser1) => data?.targetDiameter?.toFixed(3),
   },
   {
     name: "Lower Tolerance",
     unit: "mm",
-    renderValue: (data: PresetData<Laser1>) => data?.lowerTolerance?.toFixed(3),
+    renderValue: (data: Laser1) => data?.lowerTolerance?.toFixed(3),
   },
   {
     name: "Higher Tolerance",
     unit: "mm",
-    renderValue: (data: PresetData<Laser1>) =>
-      data?.higherTolerance?.toFixed(3),
+    renderValue: (data: Laser1) => data?.higherTolerance?.toFixed(3),
   },
 ];
 
@@ -47,16 +46,16 @@ export function Laser1PresetsPage() {
   } = useLaser1();
 
   const applyPreset = (preset: Preset<Laser1>) => {
-    const targetDiameter = preset.data.targetDiameter ?? 1.75;
-    const lowerTolerance = preset.data?.lowerTolerance ?? 0.05;
-    const higherTolerance = preset.data?.higherTolerance ?? 0.05;
+    const targetDiameter = preset?.data?.targetDiameter ?? 1.75;
+    const lowerTolerance = preset?.data?.lowerTolerance ?? 0.05;
+    const higherTolerance = preset?.data?.higherTolerance ?? 0.05;
 
     setTargetDiameter(targetDiameter);
     setLowerTolerance(lowerTolerance);
     setHigherTolerance(higherTolerance);
   };
 
-  const toPresetData = (s: typeof state): PresetData<Laser1> => ({
+  const toPresetData = (s: typeof state): Laser1 => ({
     targetDiameter: s?.laser_state.target_diameter,
     lowerTolerance: s?.laser_state.lower_tolerance,
     higherTolerance: s?.laser_state.higher_tolerance,

electron/src/machines/laser/laser1/laser1Namespace.ts

@@ -66,19 +66,13 @@ export type Laser1NamespaceStore = {
   roundness: TimeSeries;
 };
 
-// Constants for time durations
-const HALF_SECOND = 500;
-
-const { initialTimeSeries: diameter, insert: addDiameter } = createTimeSeries({
-  sampleIntervalLong: HALF_SECOND,
-});
+const { initialTimeSeries: diameter, insert: addDiameter } = createTimeSeries();
 const { initialTimeSeries: x_diameter, insert: addXDiameter } =
-  createTimeSeries({ sampleIntervalLong: HALF_SECOND });
+  createTimeSeries();
 const { initialTimeSeries: y_diameter, insert: addYDiameter } =
-  createTimeSeries({ sampleIntervalLong: HALF_SECOND });
-const { initialTimeSeries: roundness, insert: addRoundness } = createTimeSeries(
-  { sampleIntervalLong: HALF_SECOND },
-);
+  createTimeSeries();
+const { initialTimeSeries: roundness, insert: addRoundness } =
+  createTimeSeries();
 
 /**
  * Factory function to create a new Laser1 namespace store

electron/src/machines/mock/mock1/Mock1Manual.tsx

@@ -1,12 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import mockManualContent from "@root/docs/machines/manuals/mock.md?raw";
+import winderManualContent from "@/assets/markdown/winder/manual.md?raw";
 
 export function Mock1ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc markdownContent={mockManualContent} isManual={true} />
+      <MarkdownWithToc markdownContent={winderManualContent} />
     </Page>
   );
 }

electron/src/machines/mock/mock1/Mock1PresetsPage.tsx

@@ -3,7 +3,7 @@ import { useMock1 } from "./useMock";
 import { mock1 } from "@/machines/properties";
 
 import { PresetsPage } from "@/components/preset/PresetsPage";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import { PresetPreviewEntries } from "@/components/preset/PresetPreviewTable";
 import { z } from "zod";
 
@@ -15,7 +15,7 @@ const mock1PresetDataSchema = z
   })
   .partial();
 
-type Mock1 = typeof mock1PresetDataSchema;
+type Mock1 = z.infer<typeof mock1PresetDataSchema>;
 
 const schemas = new Map([[1, mock1PresetDataSchema]]);
 
@@ -23,17 +23,17 @@ const previewEntries: PresetPreviewEntries<Mock1> = [
   {
     name: "Frequency 1",
     unit: "mHz",
-    renderValue: (data: PresetData<Mock1>) => data?.frequency1?.toFixed(3),
+    renderValue: (data: Mock1) => data?.frequency1?.toFixed(3),
   },
   {
     name: "Frequency 2",
     unit: "mHz",
-    renderValue: (data: PresetData<Mock1>) => data?.frequency2?.toFixed(3),
+    renderValue: (data: Mock1) => data?.frequency2?.toFixed(3),
   },
   {
     name: "Frequency 3",
     unit: "mHz",
-    renderValue: (data: PresetData<Mock1>) => data?.frequency3?.toFixed(3),
+    renderValue: (data: Mock1) => data?.frequency3?.toFixed(3),
   },
 ];
 
@@ -51,7 +51,7 @@ export function Mock1PresetsPage() {
     setFrequency3(frequency3);
   };
 
-  const toPresetData = (s: typeof state): PresetData<Mock1> => ({
+  const toPresetData = (s: typeof state): Mock1 => ({
     frequency1: s?.frequency1 ?? defaultState?.frequency1,
     frequency2: s?.frequency2 ?? defaultState?.frequency2,
     frequency3: s?.frequency3 ?? defaultState?.frequency3,

electron/src/machines/properties.ts

@@ -416,12 +416,12 @@ export const aquapath1: MachineProperties = {
     },
     {
       role: 4,
-      role_label: "EL5152",
+      role_label: "EL1002",
       allowed_devices: [
         {
           vendor_id: 2,
-          product_id: 0x14203052,
-          revision: 0x140000,
+          product_id: 0x3ea3052,
+          revision: 0x120000,
         },
       ],
     },
@@ -462,6 +462,28 @@ export const testmachine: MachineProperties = {
     },
   ],
 };
+export const digitalInputTestMachine: MachineProperties = {
+  name: "Digital Input Machine",
+  version: "V1",
+  slug: "digitalInputTestMachine",
+  icon: "lu:Disc3",
+  machine_identification: {
+    vendor: VENDOR_QITECH,
+    machine: 0x0040,
+  },
+  device_roles: [],
+};
+export const wagoPower1: MachineProperties = {
+  name: "WAGO Power",
+  version: "V1",
+  slug: "wago_power1",
+  icon: "lu:PlugZap",
+  machine_identification: {
+    vendor: VENDOR_QITECH,
+    machine: 0x000a,
+  },
+  device_roles: [],
+};
 
 export const analogInputTestMachine: MachineProperties = {
   name: "AnalogTest",
@@ -522,6 +544,30 @@ export const ip20TestMachine: MachineProperties = {
   ],
 };
 
+export const wagoAiTestMachine: MachineProperties = {
+  name: "Wago AI Test",
+  version: "V1",
+  slug: "wagoaitestmachine",
+  icon: "lu:Activity",
+  machine_identification: {
+    vendor: VENDOR_QITECH,
+    machine: 0x0036,
+  },
+  device_roles: [
+    {
+      role: 0,
+      role_label: "Wago 750-354 Bus Coupler",
+      allowed_devices: [
+        {
+          vendor_id: 0x21,
+          product_id: 0x07500354,
+          revision: 0x2,
+        },
+      ],
+    },
+  ],
+};
+
 export const machineProperties: MachineProperties[] = [
   winder2,
   extruder3,
@@ -529,9 +575,12 @@ export const machineProperties: MachineProperties[] = [
   laser1,
   mock1,
   buffer1,
+  wagoPower1,
   aquapath1,
   testmachine,
   analogInputTestMachine,
+  wagoAiTestMachine,
+  digitalInputTestMachine,
   ip20TestMachine,
 ];
 

electron/src/machines/types.ts

@@ -2,7 +2,7 @@
 // each role can only be given once
 
 import { IconName } from "@/components/Icon";
-import { rustEnumSchema } from "@/lib/types";
+import { rustEnum } from "@/lib/types";
 import { z } from "zod";
 
 // EK1100 should have role 0
@@ -62,9 +62,11 @@ export type DeviceHardwareIdentificationEthercat = z.infer<
   typeof deviceHardwareIdentificationEthercatSchema
 >;
 
-export const deviceHardwareIdentificationSchema = rustEnumSchema({
-  Ethercat: deviceHardwareIdentificationEthercatSchema,
-});
+export const deviceHardwareIdentificationSchema = z
+  .object({
+    Ethercat: deviceHardwareIdentificationEthercatSchema,
+  })
+  .check(rustEnum);
 
 export type DeviceHardwareIdentification = z.infer<
   typeof deviceHardwareIdentificationSchema

electron/src/machines/wago_power/wago_power1/WagoPower1ControlPage.tsx

@@ -0,0 +1,67 @@
+import { Page } from "@/components/Page";
+import React from "react";
+import { useWagoPower1 } from "./useWagoPower1";
+import { ControlGrid } from "@/control/ControlGrid";
+import { ControlCard } from "@/control/ControlCard";
+import { TimeSeriesValueNumeric } from "@/control/TimeSeriesValue";
+import { SelectionGroup } from "@/control/SelectionGroup";
+import { Mode } from "./wagoPower1Namespace";
+
+export function WagoPower1ControlPage() {
+  const {
+    state,
+
+    voltage,
+    current,
+
+    setMode,
+
+    isLoading,
+    isDisabled,
+  } = useWagoPower1();
+
+  return (
+    <Page>
+      <ControlGrid columns={2}>
+        <ControlCard title="Power">
+          <TimeSeriesValueNumeric
+            label="Voltage"
+            unit="V"
+            timeseries={voltage}
+            renderValue={(value) => value.toFixed(2)}
+          />
+          <TimeSeriesValueNumeric
+            label="Current"
+            unit="mA"
+            timeseries={current}
+            renderValue={(value) => value.toFixed(2)}
+          />
+        </ControlCard>
+        <ControlCard title="Mode">
+          <SelectionGroup<Mode>
+            value={state?.mode}
+            disabled={isDisabled}
+            loading={isLoading}
+            onChange={setMode}
+            orientation="vertical"
+            className="grid h-full grid-cols-2 gap-2"
+            options={{
+              Off: {
+                children: "Off",
+                icon: "lu:PowerOff",
+                isActiveClassName: "bg-gray-600",
+                className: "h-full",
+              },
+              On24V: {
+                children: "On",
+                icon: "lu:Power",
+                isActiveClassName: "bg-green-600",
+                className: "h-full",
+              },
+            }}
+          />
+        </ControlCard>
+      </ControlGrid>
+    </Page>
+  );
+}

electron/src/machines/wago_power/wago_power1/WagoPower1Page.tsx

@@ -0,0 +1,20 @@
+import { Topbar } from "@/components/Topbar";
+import { wagoPower1SerialRoute } from "@/routes/routes";
+import React from "react";
+
+export function WagoPower1Page() {
+  const { serial } = wagoPower1SerialRoute.useParams();
+  return (
+    <Topbar
+      pathname={`/_sidebar/machines/wago_power1/${serial}`}
+      items={[
+        {
+          link: "control",
+          activeLink: "control",
+          title: "Control",
+          icon: "lu:PlugZap",
+        },
+      ]}
+    />
+  );
+}

electron/src/machines/wago_power/wago_power1/useWagoPower1.ts

@@ -0,0 +1,104 @@
+import { toastError } from "@/components/Toast";
+import { wagoPower1 } from "@/machines/properties";
+import { MachineIdentificationUnique } from "@/machines/types";
+import { wagoPower1SerialRoute } from "@/routes/routes";
+import { useEffect, useMemo } from "react";
+import {
+  Mode,
+  modeSchema,
+  StateEvent,
+  useWagoPower1Namespace,
+} from "./wagoPower1Namespace";
+import { useStateOptimistic } from "@/lib/useStateOptimistic";
+import { produce } from "immer";
+import z from "zod";
+import { useMachineMutate } from "@/client/useClient";
+
+export function useWagoPower1() {
+  const { serial: serialString } = wagoPower1SerialRoute.useParams();
+
+  // Memoize the machine identification to keep it stable between renders
+  const machineIdentification: MachineIdentificationUnique = useMemo(() => {
+    const serial = parseInt(serialString);
+
+    if (isNaN(serial)) {
+      toastError(
+        "Invalid Serial Number",
+        `"${serialString}" is not a valid serial number.`,
+      );
+
+      return {
+        machine_identification: {
+          vendor: 0,
+          machine: 0,
+        },
+        serial: 0,
+      };
+    }
+
+    return {
+      machine_identification: wagoPower1.machine_identification,
+      serial,
+    };
+  }, [serialString]);
+
+  const { request: requestModeSet } = useMachineMutate(
+    z.object({ SetMode: modeSchema }),
+  );
+
+  const { state, defaultState, voltage, current } = useWagoPower1Namespace(
+    machineIdentification,
+  );
+  //
+  // Single optimistic state for all state management
+  const stateOptimistic = useStateOptimistic<StateEvent>();
+
+  // Update optimistic state when real state changes
+  useEffect(() => {
+    if (state) {
+      stateOptimistic.setReal(state);
+    }
+  }, [state]);
+
+  // Helper function for optimistic updates using produce
+  const updateStateOptimistically = (
+    producer: (current: StateEvent) => void,
+    serverRequest: () => void,
+  ) => {
+    const currentState = stateOptimistic.value;
+    if (currentState && !stateOptimistic.isOptimistic) {
+      stateOptimistic.setOptimistic(produce(currentState, producer));
+    }
+    serverRequest();
+  };
+
+  const setMode = (mode: Mode) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.mode = mode;
+      },
+      () =>
+        requestModeSet({
+          machine_identification_unique: machineIdentification,
+          data: { SetMode: mode },
+        }),
+    );
+  };
+
+  // Calculate loading states
+  const isLoading = stateOptimistic.isOptimistic;
+  const isDisabled = !stateOptimistic.isInitialized;
+
+  return {
+    state: stateOptimistic.value?.data,
+    defaultState: defaultState?.data,
+
+    current,
+    voltage,
+
+    setMode,
+
+    isLoading,
+    isDisabled,
+  };
+}

electron/src/machines/wago_power/wago_power1/wagoPower1Namespace.ts

@@ -0,0 +1,135 @@
+import { StoreApi } from "zustand";
+import { create } from "zustand";
+import { z } from "zod";
+import {
+  EventHandler,
+  eventSchema,
+  Event,
+  handleUnhandledEventError,
+  NamespaceId,
+  createNamespaceHookImplementation,
+  ThrottledStoreUpdater,
+} from "../../../client/socketioStore";
+import { MachineIdentificationUnique } from "@/machines/types";
+import { useMemo } from "react";
+import {
+  createTimeSeries,
+  TimeSeries,
+  TimeSeriesValue,
+} from "@/lib/timeseries";
+
+export const liveValuesEventSchema = eventSchema(
+  z.object({
+    voltage: z.number(),
+    current: z.number(),
+  }),
+);
+
+export type LiveValuesEvent = z.infer<typeof liveValuesEventSchema>;
+
+export const modeSchema = z.enum(["Off", "On24V"]);
+export type Mode = z.infer<typeof modeSchema>;
+
+export const stateEventSchema = eventSchema(
+  z.object({
+    mode: modeSchema,
+    is_default_state: z.boolean(),
+  }),
+);
+
+export type StateEvent = z.infer<typeof stateEventSchema>;
+
+export type WagoPower1NamespaceStore = {
+  state: StateEvent | null;
+  defaultState: StateEvent | null;
+
+  current: TimeSeries;
+  voltage: TimeSeries;
+};
+
+const { initialTimeSeries: voltage, insert: addVoltage } = createTimeSeries();
+const { initialTimeSeries: current, insert: addCurrent } = createTimeSeries();
+
+const createWagoPower1NamespaceStore = (): StoreApi<WagoPower1NamespaceStore> =>
+  create<WagoPower1NamespaceStore>(() => {
+    return {
+      state: null,
+      defaultState: null,
+      voltage,
+      current,
+    };
+  });
+
+function wagoPower1MessageHandler(
+  store: StoreApi<WagoPower1NamespaceStore>,
+  throttledUpdater: ThrottledStoreUpdater<WagoPower1NamespaceStore>,
+): EventHandler {
+  return (event: Event<any>) => {
+    const eventName = event.name;
+
+    // Helper function to update store through buffer
+    const updateStore = (
+      updater: (state: WagoPower1NamespaceStore) => WagoPower1NamespaceStore,
+    ) => {
+      throttledUpdater.updateWith(updater);
+    };
+
+    try {
+      if (eventName === "StateEvent") {
+        const stateEvent = stateEventSchema.parse(event);
+
+        updateStore((state) => ({
+          ...state,
+          state: stateEvent,
+          // only set default state if is_default_state is true
+          defaultState: stateEvent.data.is_default_state
+            ? stateEvent
+            : state.defaultState,
+        }));
+      } else if (eventName === "LiveValuesEvent") {
+        console.log(event);
+        const liveValues = liveValuesEventSchema.parse(event);
+        const { voltage, current } = liveValues.data;
+        const voltageValue: TimeSeriesValue = {
+          value: voltage,
+          timestamp: liveValues.ts,
+        };
+        const currentValue: TimeSeriesValue = {
+          value: current,
+          timestamp: liveValues.ts,
+        };
+        updateStore((store: WagoPower1NamespaceStore) => ({
+          ...store,
+          voltage: addVoltage(store.voltage, voltageValue),
+          current: addCurrent(store.current, currentValue),
+        }));
+      } else {
+        handleUnhandledEventError(eventName);
+      }
+    } catch (e) {
+      console.error(e);
+    }
+  };
+}
+
+const useWagoPower1NamespaceImplementation =
+  createNamespaceHookImplementation<WagoPower1NamespaceStore>({
+    createStore: createWagoPower1NamespaceStore,
+    createEventHandler: wagoPower1MessageHandler,
+  });
+
+export function useWagoPower1Namespace(
+  machine_identification_unique: MachineIdentificationUnique,
+): WagoPower1NamespaceStore {
+  // Generate namespace ID from validated machine ID
+  const namespaceId = useMemo<NamespaceId>(
+    () => ({
+      type: "machine",
+      machine_identification_unique,
+    }),
+    [machine_identification_unique],
+  );
+
+  // Use the implementation with validated namespace ID
+  return useWagoPower1NamespaceImplementation(namespaceId);
+}

electron/src/machines/wagoaitestmachine/WagoAiTestMachineControlPage.tsx

@@ -0,0 +1,114 @@
+import { MiniGraph } from "@/components/graph/MiniGraph";
+import { Page } from "@/components/Page";
+import { ControlCard } from "@/control/ControlCard";
+import { ControlGrid } from "@/control/ControlGrid";
+
+import React from "react";
+import { useWagoAiTestMachine } from "./useWagoAiTestMachine";
+
+export function WagoAiTestMachineControl(): React.JSX.Element {
+  const { seriesData, state, updateMeasurementRate } = useWagoAiTestMachine();
+
+  if (!seriesData) return <div>Initializing Sensor...</div>;
+
+  return (
+    <Page>
+      <ControlGrid columns={2}>
+        <ControlCard title="Measurement Control">
+          <div
+            style={{
+              display: "flex",
+              flexDirection: "row",
+              justifyContent: "space-between",
+            }}
+          >
+            <div>Measurement Rate (Hz)</div>
+            <input
+              type="number"
+              style={{
+                border: "2px solid transparent",
+                borderRadius: "4px",
+                padding: "3px",
+              }}
+              className={"bg-neutral-100 shadow"}
+              value={state.measurementRateHz}
+              onChange={(v) => {
+                const val = Number(v.currentTarget.value);
+                updateMeasurementRate(val);
+              }}
+              min={1}
+            ></input>
+          </div>
+        </ControlCard>
+        <ControlCard title="Analog Input 1 (4-20mA)">
+          <div className="flex flex-row">
+            <MiniGraph
+              newData={seriesData.ai1}
+              width={400}
+              renderValue={(v) => v.toFixed(2)}
+            ></MiniGraph>
+            <div className="ml-4 flex flex-col justify-center">
+              <div>{seriesData.ai1.current?.value.toFixed(2)} mA</div>
+              {state.wiringErrors?.[0] && (
+                <div className="mt-2 rounded bg-red-100 px-2 py-1 text-sm font-semibold text-red-800">
+                  Wiring Error
+                </div>
+              )}
+            </div>
+          </div>
+        </ControlCard>
+        <ControlCard title="Analog Input 2 (4-20mA)">
+          <div className="flex flex-row">
+            <MiniGraph
+              newData={seriesData.ai2}
+              width={400}
+              renderValue={(v) => v.toFixed(2)}
+            ></MiniGraph>
+            <div className="ml-4 flex flex-col justify-center">
+              <div>{seriesData.ai2.current?.value.toFixed(2)} mA</div>
+              {state.wiringErrors?.[1] && (
+                <div className="mt-2 rounded bg-red-100 px-2 py-1 text-sm font-semibold text-red-800">
+                  Wiring Error
+                </div>
+              )}
+            </div>
+          </div>
+        </ControlCard>
+        <ControlCard title="Analog Input 3 (4-20mA)">
+          <div className="flex flex-row">
+            <MiniGraph
+              newData={seriesData.ai3}
+              width={400}
+              renderValue={(v) => v.toFixed(2)}
+            ></MiniGraph>
+            <div className="ml-4 flex flex-col justify-center">
+              <div>{seriesData.ai3.current?.value.toFixed(2)} mA</div>
+              {state.wiringErrors?.[2] && (
+                <div className="mt-2 rounded bg-red-100 px-2 py-1 text-sm font-semibold text-red-800">
+                  Wiring Error
+                </div>
+              )}
+            </div>
+          </div>
+        </ControlCard>
+        <ControlCard title="Analog Input 4 (4-20mA)">
+          <div className="flex flex-row">
+            <MiniGraph
+              newData={seriesData.ai4}
+              width={400}
+              renderValue={(v) => v.toFixed(2)}
+            ></MiniGraph>
+            <div className="ml-4 flex flex-col justify-center">
+              <div>{seriesData.ai4.current?.value.toFixed(2)} mA</div>
+              {state.wiringErrors?.[3] && (
+                <div className="mt-2 rounded bg-red-100 px-2 py-1 text-sm font-semibold text-red-800">
+                  Wiring Error
+                </div>
+              )}
+            </div>
+          </div>
+        </ControlCard>
+      </ControlGrid>
+    </Page>
+  );
+}

electron/src/machines/wagoaitestmachine/WagoAiTestMachinePage.tsx

@@ -0,0 +1,21 @@
+import { Topbar } from "@/components/Topbar";
+import { wagoAiTestMachineSerialRoute } from "@/routes/routes";
+import React from "react";
+
+export function WagoAiTestMachine(): React.JSX.Element {
+  const { serial } = wagoAiTestMachineSerialRoute.useParams();
+
+  return (
+    <Topbar
+      pathname={`/_sidebar/machines/wagoaitestmachine/${serial}`}
+      items={[
+        {
+          link: "control",
+          activeLink: "control",
+          title: "Control",
+          icon: "lu:CirclePlay",
+        },
+      ]}
+    />
+  );
+}

electron/src/machines/wagoaitestmachine/useWagoAiTestMachine.ts

@@ -0,0 +1,163 @@
+import { useMachineMutate } from "@/client/useClient";
+import { toastError } from "@/components/Toast";
+import { useStateOptimistic } from "@/lib/useStateOptimistic";
+import {
+  createTimeSeries,
+  TimeSeries,
+  TimeSeriesValue,
+  TimeSeriesWithInsert,
+} from "@/lib/timeseries";
+import { MachineIdentificationUnique } from "@/machines/types";
+import { wagoAiTestMachineSerialRoute } from "@/routes/routes";
+import { produce } from "immer";
+import { useEffect, useMemo, useState } from "react";
+import z from "zod";
+import { wagoAiTestMachine } from "../properties";
+import {
+  StateEvent,
+  useWagoAiTestMachineNamespace,
+} from "./useWagoAiTestMachineNamespace";
+
+export type AnalogInputTimeSeries = {
+  ai1: TimeSeries;
+  ai2: TimeSeries;
+  ai3: TimeSeries;
+  ai4: TimeSeries;
+};
+
+export function useWagoAiTestMachine() {
+  const { serial: serialString } = wagoAiTestMachineSerialRoute.useParams();
+  const machineIdentification: MachineIdentificationUnique = useMemo(() => {
+    const serial = parseInt(serialString);
+    if (isNaN(serial)) {
+      toastError(
+        "Invalid Serial Number",
+        `"${serialString}" is not a valid serial number.`,
+      );
+      return {
+        machine_identification: { vendor: 0, machine: 0 },
+        serial: 0,
+      };
+    }
+    return {
+      machine_identification: wagoAiTestMachine.machine_identification,
+      serial,
+    };
+  }, [serialString]);
+
+  const state = useWagoAiTestMachineNamespace({
+    type: "machine",
+    machine_identification_unique: machineIdentification,
+  });
+
+  const mutateMachine = useMachineMutate(
+    z.object({
+      measurement_rate_hz: z.number(),
+    }),
+  );
+
+  const stateOptimistic = useStateOptimistic<StateEvent>();
+
+  const updateStateOptimistically = (
+    producer: (current: StateEvent) => void,
+    serverRequest?: () => void,
+  ) => {
+    const currentState = stateOptimistic.value;
+    if (currentState)
+      stateOptimistic.setOptimistic(produce(currentState, producer));
+    serverRequest?.();
+  };
+
+  const updateMeasurementRate = (val: number) => {
+    updateStateOptimistically(
+      (current) => {
+        current.measurementRateHz = val;
+      },
+      () => {
+        mutateMachine.request({
+          machine_identification_unique: machineIdentification,
+          data: { measurement_rate_hz: val },
+        });
+      },
+    );
+  };
+
+  // Create time series for each analog input
+  const timeSeriesInstances: {
+    ai1: TimeSeriesWithInsert;
+    ai2: TimeSeriesWithInsert;
+    ai3: TimeSeriesWithInsert;
+    ai4: TimeSeriesWithInsert;
+  } = {
+    ai1: createTimeSeries({
+      sampleIntervalShort: 20,
+      sampleIntervalLong: 1000,
+      retentionDurationShort: 5000,
+      retentionDurationLong: 60 * 60 * 1000,
+    }),
+    ai2: createTimeSeries({
+      sampleIntervalShort: 20,
+      sampleIntervalLong: 1000,
+      retentionDurationShort: 5000,
+      retentionDurationLong: 60 * 60 * 1000,
+    }),
+    ai3: createTimeSeries({
+      sampleIntervalShort: 20,
+      sampleIntervalLong: 1000,
+      retentionDurationShort: 5000,
+      retentionDurationLong: 60 * 60 * 1000,
+    }),
+    ai4: createTimeSeries({
+      sampleIntervalShort: 20,
+      sampleIntervalLong: 1000,
+      retentionDurationShort: 5000,
+      retentionDurationLong: 60 * 60 * 1000,
+    }),
+  };
+
+  const [seriesData, setSeriesData] = useState<AnalogInputTimeSeries | null>({
+    ai1: timeSeriesInstances.ai1.initialTimeSeries,
+    ai2: timeSeriesInstances.ai2.initialTimeSeries,
+    ai3: timeSeriesInstances.ai3.initialTimeSeries,
+    ai4: timeSeriesInstances.ai4.initialTimeSeries,
+  });
+
+  useEffect(() => {
+    const analogInputs = state.analogInputs;
+
+    if (analogInputs && seriesData) {
+      const [ai1, ai2, ai3, ai4, timestampStr] = analogInputs;
+      const timestamp = Number(timestampStr);
+
+      const dataPoint1: TimeSeriesValue = {
+        value: ai1 * 1000, // Convert to mA
+        timestamp,
+      };
+      const dataPoint2: TimeSeriesValue = {
+        value: ai2 * 1000,
+        timestamp,
+      };
+      const dataPoint3: TimeSeriesValue = {
+        value: ai3 * 1000,
+        timestamp,
+      };
+      const dataPoint4: TimeSeriesValue = {
+        value: ai4 * 1000,
+        timestamp,
+      };
+
+      setSeriesData({
+        ai1: timeSeriesInstances.ai1.insert(seriesData.ai1, dataPoint1),
+        ai2: timeSeriesInstances.ai2.insert(seriesData.ai2, dataPoint2),
+        ai3: timeSeriesInstances.ai3.insert(seriesData.ai3, dataPoint3),
+        ai4: timeSeriesInstances.ai4.insert(seriesData.ai4, dataPoint4),
+      });
+    }
+  }, [state]);
+
+  return {
+    seriesData,
+    state,
+    updateMeasurementRate,
+  };
+}

electron/src/machines/wagoaitestmachine/useWagoAiTestMachineNamespace.ts

@@ -0,0 +1,86 @@
+import {
+  createNamespaceHookImplementation,
+  EventHandler,
+  eventSchema,
+} from "@/client/socketioStore";
+import z from "zod";
+import { create, StoreApi } from "zustand";
+
+// ========== Event Schema ==========
+
+export const stateEventDataSchema = z.object({
+  measurementRateHz: z.number().optional(),
+  analogInputs: z
+    .tuple([z.number(), z.number(), z.number(), z.number(), z.string()])
+    .optional(),
+  wiringErrors: z
+    .tuple([z.boolean(), z.boolean(), z.boolean(), z.boolean()])
+    .optional(),
+});
+
+export const stateEventSchema = eventSchema(stateEventDataSchema);
+
+export type StateEvent = z.infer<typeof stateEventDataSchema>;
+
+// ========== Store ==========
+export type WagoAiTestMachineNamespaceStore = z.infer<
+  typeof stateEventDataSchema
+>;
+
+const createMachineStore = (): StoreApi<WagoAiTestMachineNamespaceStore> =>
+  create<WagoAiTestMachineNamespaceStore>(() => ({
+    measurementRateHz: 1,
+    analogInputs: undefined,
+    wiringErrors: undefined,
+  }));
+
+// ========== Message Handler ==========
+function wagoAiTestMachineMessageHandler(
+  store: StoreApi<WagoAiTestMachineNamespaceStore>,
+): EventHandler {
+  return (event) => {
+    const oldState = store.getState();
+
+    switch (event.name) {
+      case "MeasurementRateHz":
+        {
+          const newMeasurementRateHz = event.data["MeasurementRateHz"];
+          if (
+            newMeasurementRateHz &&
+            newMeasurementRateHz !== oldState.measurementRateHz
+          )
+            store.setState({
+              ...oldState,
+              measurementRateHz: newMeasurementRateHz,
+            });
+        }
+        break;
+      case "AnalogInputs":
+        {
+          const newAnalogInputs = event.data["AnalogInputs"];
+          if (newAnalogInputs && newAnalogInputs !== oldState.analogInputs)
+            store.setState({
+              ...oldState,
+              analogInputs: newAnalogInputs,
+            });
+        }
+        break;
+      case "WiringErrors":
+        {
+          const newWiringErrors = event.data["WiringErrors"];
+          if (newWiringErrors && newWiringErrors !== oldState.wiringErrors)
+            store.setState({
+              ...oldState,
+              wiringErrors: newWiringErrors,
+            });
+        }
+        break;
+    }
+  };
+}
+
+// ========== Namespace Hook ==========
+export const useWagoAiTestMachineNamespace = createNamespaceHookImplementation({
+  createStore: () => createMachineStore(),
+  createEventHandler: wagoAiTestMachineMessageHandler,
+});

electron/src/machines/winder/winder2/Winder2Manual.tsx

@@ -1,12 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import winderManualContent from "@root/docs/machines/manuals/winder.md?raw";
+import winderManualContent from "@/assets/markdown/winder/manual.md?raw";
 
 export function Winder2ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc markdownContent={winderManualContent} isManual={true} />
+      <MarkdownWithToc markdownContent={winderManualContent} />
     </Page>
   );
 }

electron/src/machines/winder/winder2/Winder2PresetsPage.tsx

@@ -3,7 +3,7 @@ import { useWinder2 } from "./useWinder";
 import { winder2 } from "@/machines/properties";
 
 import { PresetsPage } from "@/components/preset/PresetsPage";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import {
   pullerStateSchema,
   spoolSpeedControllerStateSchema,
@@ -16,19 +16,21 @@ import {
 
 const winder2PresetDataSchema = z
   .object({
-    traverse_state: z.object({
-      limit_inner: z.number(),
-      limit_outer: z.number(),
-      step_size: z.number(),
-      padding: z.number(),
-      laserpointer: z.boolean(),
-    }),
-    puller_state: pullerStateSchema,
-    spool_speed_controller_state: spoolSpeedControllerStateSchema,
+    traverse_state: z
+      .object({
+        limit_inner: z.number(),
+        limit_outer: z.number(),
+        step_size: z.number(),
+        padding: z.number(),
+        laserpointer: z.boolean(),
+      })
+      .partial(),
+    puller_state: pullerStateSchema.partial(),
+    spool_speed_controller_state: spoolSpeedControllerStateSchema.partial(),
   })
-  .deepPartial();
+  .partial();
 
-type Winder2 = typeof winder2PresetDataSchema;
+type Winder2 = z.infer<typeof winder2PresetDataSchema>;
 
 const schemas = new Map([[1, winder2PresetDataSchema]]);
 
@@ -36,40 +38,39 @@ const previewEntries: PresetPreviewEntries<Winder2> = [
   {
     name: "Inner Traverse Limit",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
-      data?.traverse_state?.limit_inner?.toFixed(1) ?? "N/A",
+    renderValue: (data: Winder2) =>
+      data.traverse_state?.limit_inner?.toFixed(1) ?? "N/A",
   },
   {
     name: "Outer Traverse Limit",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data?.traverse_state?.limit_outer?.toFixed(1) ?? "N/A",
   },
   {
     name: "Traverse Step Size",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data?.traverse_state?.step_size?.toFixed(1) ?? "N/A",
   },
   {
     name: "Traverse Padding",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
-      data?.traverse_state?.padding?.toFixed(1),
+    renderValue: (data: Winder2) => data?.traverse_state?.padding?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Puller Regulation",
-    renderValue: (data: PresetData<Winder2>) => data?.puller_state?.regulation,
+    renderValue: (data: Winder2) => data?.puller_state?.regulation,
   },
   {
     name: "Puller Direction",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.puller_state?.forward ? "Forward" : "Backward",
   },
   {
     name: "Puller Gear Ratio",
-    renderValue: (data: PresetData<Winder2>) => {
+    renderValue: (data: Winder2) => {
       const ratio = data.puller_state?.gear_ratio;
       if (ratio === "OneToOne") return "1:1";
       if (ratio === "OneToFive") return "1:5";
@@ -80,74 +81,73 @@ const previewEntries: PresetPreviewEntries<Winder2> = [
   {
     name: "Puller Target Speed",
     unit: "m/min",
-    renderValue: (data: PresetData<Winder2>) =>
-      data.puller_state?.target_speed?.toFixed(2),
+    renderValue: (data: Winder2) => data.puller_state?.target_speed?.toFixed(2),
   },
   {
     name: "Puller Target Diameter",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.puller_state?.target_diameter?.toFixed(1),
   },
   {
     name: "Puller Target Diameter",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.puller_state?.target_diameter?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Spool Regulation",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.regulation_mode,
   },
   {
     name: "Spool Direction",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.forward ? "Forward" : "Reverse",
   },
   {
     name: "Spool Min Speed",
     unit: "rpm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.minmax_min_speed?.toFixed(2),
   },
   {
     name: "Spool Max Speed",
     unit: "rpm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.minmax_max_speed?.toFixed(2),
   },
   previewSeparator,
   {
     name: "Adaptive Spool Tension Target",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_tension_target?.toFixed(2),
   },
   {
     name: "Adaptive Spool Learning Rate",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_radius_learning_rate?.toFixed(
         2,
       ),
   },
   {
     name: "Adaptive Spool Max Speed Multiplier",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_max_speed_multiplier?.toFixed(
         1,
       ),
   },
   {
     name: "Adaptive Spool Acceleration Factor",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_acceleration_factor?.toFixed(
         2,
       ),
   },
   {
     name: "Adaptive Spool Deaccel. Urgency",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_deacceleration_urgency_multiplier?.toFixed(
         1,
       ),
@@ -230,11 +230,11 @@ export function Winder2PresetsPage() {
     // );
 
     enableTraverseLaserpointer(
-      preset.data.traverse_state?.laserpointer ?? false,
+      preset.data?.traverse_state?.laserpointer ?? false,
     );
   };
 
-  const toPresetData = (s: typeof state): PresetData<Winder2> => ({
+  const toPresetData = (s: typeof state): Winder2 => ({
     traverse_state: {
       limit_inner: s?.traverse_state?.limit_inner,
       limit_outer: s?.traverse_state?.limit_outer,

electron/src/machines/winder/winder2/winder2Namespace.ts

@@ -1,8 +1,3 @@
-/**
- * @file winder2Namespace.ts
- * @description TypeScript implementation of Winder2 namespace with Zod schema validation.
- */
-
 import { StoreApi } from "zustand";
 import { create } from "zustand";
 import { z } from "zod";

electron/src/metrics/MetricsControlPage.tsx

@@ -108,10 +108,10 @@ export function MetricsControlPage() {
 
           {/* Total page faults (composite, no single unit) */}
           <MetricCard
-            title="Total Page Faults"
+            title="Page Faults"
             value={
               minorFaults != null || majorFaults != null
-                ? `${minorFaults ?? "–"} minor | ${majorFaults ?? "–"} major`
+                ? `${minorFaults ?? "–"} minor per second | ${majorFaults ?? "–"} major`
                 : "—"
             }
           />

electron/src/routes/routes.tsx

@@ -4,7 +4,6 @@ import React from "react";
 import { z } from "zod";
 
 import { ChooseVersionPage } from "@/setup/ChooseVersionPage";
-import { fallback, zodValidator } from "@tanstack/zod-adapter";
 import { githubSourceSchema } from "@/setup/GithubSourceDialog";
 import { SidebarLayout } from "@/components/SidebarLayout";
 import { SetupPage } from "@/setup/SetupPage";
@@ -42,6 +41,7 @@ import { Buffer1SettingsPage } from "@/machines/buffer/buffer1/Buffer1Settings";
 import { Laser1ControlPage } from "@/machines/laser/laser1/Laser1ControlPage";
 import { Laser1GraphsPage } from "@/machines/laser/laser1/Laser1Graph";
 import { Laser1Page } from "@/machines/laser/laser1/Laser1Page";
+import { Laser1PresetsPage } from "@/machines/laser/laser1/Laser1PresetsPage";
 
 import { Mock1ControlPage } from "@/machines/mock/mock1/Mock1ControlPage";
 import { Mock1GraphPage } from "@/machines/mock/mock1/Mock1Graph";
@@ -52,18 +52,28 @@ import { Mock1PresetsPage } from "@/machines/mock/mock1/Mock1PresetsPage";
 import { Aquapath1ControlPage } from "@/machines/aquapath/aquapath1/Aquapath1ControlPage";
 import { Aquapath1Page } from "@/machines/aquapath/aquapath1/Aquapath1Page";
 import { Aquapath1GraphPage } from "@/machines/aquapath/aquapath1/Aquapath1Graph";
+import { Aquapath1SettingsPage } from "@/machines/aquapath/aquapath1/Aquapath1Settings";
 
 import { TestMachinePage } from "@/machines/testmachine/TestMachinePage";
 import { TestMachineControlPage } from "@/machines/testmachine/TestMachineControlPage";
-import { Laser1PresetsPage } from "@/machines/laser/laser1/Laser1PresetsPage";
+
 import { AnalogInputTestMachine } from "@/machines/analoginputtestmachine/AnalogInputTestMachinePage";
 import { AnalogInputTestMachineControl } from "@/machines/analoginputtestmachine/AnalogInputTestMachineControlPage";
+import { WagoAiTestMachine } from "@/machines/wagoaitestmachine/WagoAiTestMachinePage";
+import { WagoAiTestMachineControl } from "@/machines/wagoaitestmachine/WagoAiTestMachineControlPage";
+
+import { DigitalInputTestMachinePage } from "@/machines/digitalinputtestmachine/DigitalInputTestMachinePage";
+import { DigitalInputTestMachineControlPage } from "@/machines/digitalinputtestmachine/DigitalInputTestMachineControlPage";
+
 import { IP20TestMachinePage } from "@/machines/ip20testmachine/IP20TestMachinePage";
 import { IP20TestMachineControlPage } from "@/machines/ip20testmachine/IP20TestMachineControlPage";
 
 import { MetricsGraphsPage } from "@/metrics/MetricsGraphsPage";
 import { MetricsControlPage } from "@/metrics/MetricsControlPage";
 
+import { WagoPower1Page } from "@/machines/wago_power/wago_power1/WagoPower1Page";
+import { WagoPower1ControlPage } from "@/machines/wago_power/wago_power1/WagoPower1ControlPage";
+
 // make a route tree like this
 // _mainNavigation/machines/winder2/$serial/control
 // _mainNavigation/configuration/a
@@ -96,6 +106,30 @@ export const analogInputTestMachineControlRoute = createRoute({
   component: () => <AnalogInputTestMachineControl />,
 });
 
+export const wagoAiTestMachineSerialRoute = createRoute({
+  getParentRoute: () => machinesRoute,
+  path: "wagoaitestmachine/$serial",
+  component: () => <WagoAiTestMachine />,
+});
+
+export const wagoAiTestMachineControlRoute = createRoute({
+  getParentRoute: () => wagoAiTestMachineSerialRoute,
+  path: "control",
+  component: () => <WagoAiTestMachineControl />,
+});
+
+export const digitalInputTestMachineSerialRoute = createRoute({
+  getParentRoute: () => machinesRoute,
+  path: "digitalInputTestMachine/$serial",
+  component: () => <DigitalInputTestMachinePage />,
+});
+
+export const digitalInputTestMachineControlRoute = createRoute({
+  getParentRoute: () => digitalInputTestMachineSerialRoute,
+  path: "control",
+  component: () => <DigitalInputTestMachineControlPage />,
+});
+
 export const ip20TestMachineSerialRoute = createRoute({
   getParentRoute: () => machinesRoute,
   path: "ip20testmachine/$serial",
@@ -311,12 +345,30 @@ export const aquapath1ControlRoute = createRoute({
   component: () => <Aquapath1ControlPage />,
 });
 
+export const aquapath1SettingsRoute = createRoute({
+  getParentRoute: () => aquapath1SerialRoute,
+  path: "settings",
+  component: () => <Aquapath1SettingsPage />,
+});
+
 export const buffer1SettingsRoute = createRoute({
   getParentRoute: () => buffer1SerialRoute,
   path: "settings",
   component: () => <Buffer1SettingsPage />,
 });
 
+export const wagoPower1SerialRoute = createRoute({
+  getParentRoute: () => machinesRoute,
+  path: "wago_power1/$serial",
+  component: () => <WagoPower1Page />,
+});
+
+export const wagoPower1ControlRoute = createRoute({
+  getParentRoute: () => wagoPower1SerialRoute,
+  path: "control",
+  component: () => <WagoPower1ControlPage />,
+});
+
 export const setupRoute = createRoute({
   getParentRoute: () => sidebarRoute,
   path: "setup",
@@ -365,9 +417,9 @@ export const metricsRoute = createRoute({
 
 export const versionSearchSchema = z
   .object({
-    branch: fallback(z.string().optional(), undefined),
-    commit: fallback(z.string().optional(), undefined),
-    tag: fallback(z.string().optional(), undefined),
+    branch: z.string().optional(),
+    commit: z.string().optional(),
+    tag: z.string().optional(),
   })
   .merge(githubSourceSchema)
   .refine(
@@ -389,14 +441,14 @@ export const updateChangelogRoute = createRoute({
   getParentRoute: () => updateRoute,
   path: "changelog",
   component: () => <ChangelogPage />,
-  validateSearch: zodValidator(versionSearchSchema),
+  validateSearch: versionSearchSchema,
 });
 
 export const updateExecuteRoute = createRoute({
   getParentRoute: () => updateRoute,
   path: "execute",
   component: () => <UpdateExecutePage />,
-  validateSearch: zodValidator(versionSearchSchema),
+  validateSearch: versionSearchSchema,
 });
 
 export const rootTree = RootRoute.addChildren([
@@ -424,11 +476,18 @@ export const rootTree = RootRoute.addChildren([
         analogInputTestMachineControlRoute,
       ]),
 
+      wagoAiTestMachineSerialRoute.addChildren([wagoAiTestMachineControlRoute]),
+
+      digitalInputTestMachineSerialRoute.addChildren([
+        digitalInputTestMachineControlRoute,
+      ]),
+
       ip20TestMachineSerialRoute.addChildren([ip20TestMachineControlRoute]),
 
       aquapath1SerialRoute.addChildren([
         aquapath1ControlRoute,
         aquapath1GraphRoute,
+        aquapath1SettingsRoute,
       ]),
 
       winder2SerialRoute.addChildren([
@@ -462,6 +521,8 @@ export const rootTree = RootRoute.addChildren([
         mock1PresetsRoute,
       ]),
 
+      wagoPower1SerialRoute.addChildren([wagoPower1ControlRoute]),
+
       buffer1SerialRoute.addChildren([buffer1ControlRoute]),
     ]),
   ]),

electron/src/setup/DeviceEepromDialog.tsx

@@ -15,7 +15,13 @@ import {
   machineProperties,
   VENDOR_QITECH,
 } from "@/machines/properties";
-import React, { useEffect, useMemo, useRef, useState } from "react";
+import React, {
+  useCallback,
+  useEffect,
+  useMemo,
+  useRef,
+  useState,
+} from "react";
 import { z } from "zod";
 import { useForm } from "react-hook-form";
 import { zodResolver } from "@hookform/resolvers/zod";
@@ -37,7 +43,6 @@ import {
   SelectValue,
 } from "@/components/ui/select";
 import { useFormValues } from "@/lib/useFormValues";
-import { validateU16 } from "@/lib/validation";
 import { DeviceRoleComponent } from "@/components/DeviceRole";
 import { Alert } from "@/components/Alert";
 import { Separator } from "@/components/ui/separator";
@@ -54,9 +59,15 @@ type Props = {
 };
 
 const formSchema = z.object({
-  machine: z.string().superRefine(validateU16),
-  serial: z.string().superRefine(validateU16),
-  role: z.string().superRefine(validateU16),
+  machine: z
+    .string()
+    .refine((v) => parseInt(v) < 0xffff, { error: "Value too big" }),
+  serial: z
+    .string()
+    .refine((v) => parseInt(v) < 0xffff, { error: "Value too big" }),
+  role: z
+    .string()
+    .refine((v) => parseInt(v) < 0xffff, { error: "Value too big" }),
 });
 
 type FormSchema = z.infer<typeof formSchema>;
@@ -145,6 +156,15 @@ export function DeviceEeepromDialogContent({ device, setOpen }: ContentProps) {
       });
   };
 
+  const updateNumpadPosition = useCallback(() => {
+    if (!numpadOpen || !dialogRef.current) return;
+    const rect = dialogRef.current.getBoundingClientRect();
+    setNumpadPosition({
+      left: rect.right + 20,
+      top: rect.top + rect.height / 2,
+    });
+  }, [numpadOpen]);
+
   const machinePreset = useMemo(() => {
     if (!values.machine) return;
     return getMachineProperties({
@@ -182,12 +202,7 @@ export function DeviceEeepromDialogContent({ device, setOpen }: ContentProps) {
 
   // Position numpad once when it opens
   useEffect(() => {
-    if (!numpadOpen || !dialogRef.current) return;
-    const rect = dialogRef.current.getBoundingClientRect();
-    setNumpadPosition({
-      left: rect.right + 20,
-      top: rect.top + rect.height / 2,
-    });
+    updateNumpadPosition();
   }, [numpadOpen]);
 
   // Close numpad when clicking outside input/numpad
@@ -221,6 +236,14 @@ export function DeviceEeepromDialogContent({ device, setOpen }: ContentProps) {
     }
   }, [numpadOpen]);
 
+  // Update numpad position whenever the window resizes
+  useEffect(() => {
+    window.addEventListener("resize", updateNumpadPosition);
+    return () => {
+      window.removeEventListener("resize", updateNumpadPosition);
+    };
+  }, [updateNumpadPosition]);
+
   // Numpad handlers for serial input
   const numpadHandlers = useMemo(() => {
     const ensureFocus = () => {

electron/src/setup/GithubSourceDialog.tsx

@@ -24,7 +24,6 @@ import { Input } from "@/components/ui/input";
 import { Separator } from "@/components/ui/separator";
 import { Icon } from "@/components/Icon";
 import { TouchButton } from "@/components/touch/TouchButton";
-import { fallback } from "@tanstack/zod-adapter";
 
 type Props = {
   value: GithubSource;
@@ -32,9 +31,9 @@ type Props = {
 };
 
 export const githubSourceSchema = z.object({
-  githubRepoOwner: fallback(z.string(), "qitechgmbh"),
-  githubRepoName: fallback(z.string(), "control"),
-  githubToken: fallback(z.string().optional().nullable(), undefined),
+  githubRepoOwner: z.string().catch("qitechgmbh"),
+  githubRepoName: z.string().catch("control"),
+  githubToken: z.string().optional(),
 });
 
 export type GithubSource = z.infer<typeof githubSourceSchema>;
@@ -91,7 +90,7 @@ export function GithubSourceDialogContent({
   const onSubmit = (values: GithubSource) => {
     onChange({
       ...values,
-      githubToken: values.githubToken === "" ? null : values.githubToken,
+      githubToken: values.githubToken === "" ? undefined : values.githubToken,
     });
     setOpen(false);
   };

electron/tsconfig.json

@@ -16,8 +16,7 @@
     "strict": true,
     "baseUrl": ".",
     "paths": {
-      "@/*": ["./src/*"],
-      "@root/*": ["../*"]
+      "@/*": ["./src/*"]
     },
     "outDir": "dist",
     "moduleResolution": "node",

ethercat-hal/src/devices/el3062_0030.rs

@@ -161,18 +161,12 @@ impl crate::coe::Configuration for EL3062_0030TxPdo {
             len += 1;
             device.sdo_write(0x1C13, len, 0x1A00u16).await?;
         }
-        if let Some(_) = &self.ai_compact_channel1 {
-            len += 1;
-            device.sdo_write(0x1C13, len, 0x1A01u16).await?;
-        }
+
         if let Some(_) = &self.ai_standard_channel2 {
             len += 1;
             device.sdo_write(0x1C13, len, 0x1A02u16).await?;
         }
-        if let Some(_) = &self.ai_compact_channel2 {
-            len += 1;
-            device.sdo_write(0x1C13, len, 0x1A03u16).await?;
-        }
+
         device.sdo_write(0x1C13, 0, len).await?;
         Ok(())
     }

ethercat-hal/src/devices/el6021.rs

@@ -328,6 +328,8 @@ impl TxPdoObject for Standard22ByteMdp600Input {
         self.status.overrun_error = bits[6];
         // Bit7 is reserved/unused
         self.length = bits[8..8 + 8].load_le::<u8>();
+        // the serial bytes start at bit 16, then we calculate the offset of when the serial bytes buffer is over, which for Standard22ByteMdp600Input is 22bytes
+        // to get the size in bits we do 22 * 8 -> 176bits
         let serial_bytes = bits[16..(16 + 22 * 8_usize)].chunks_exact(8);
         for (i, val) in serial_bytes.enumerate() {
             self.data[i] = val.load_le();

ethercat-hal/src/devices/wago_750_354.rs

@@ -7,7 +7,10 @@ use crate::{
     devices::{
         DynamicEthercatDevice, Module,
         wago_modules::{
+            wago_750_402::{WAGO_750_402_MODULE_IDENT, WAGO_750_402_PRODUCT_ID},
+            wago_750_455::{WAGO_750_455_MODULE_IDENT, WAGO_750_455_PRODUCT_ID},
             wago_750_501::{WAGO_750_501_MODULE_IDENT, WAGO_750_501_PRODUCT_ID},
+            wago_750_530::{WAGO_750_530_MODULE_IDENT, WAGO_750_530_PRODUCT_ID},
             wago_750_652::{WAGO_750_652_MODULE_IDENT, WAGO_750_652_PRODUCT_ID},
             wago_750_1506::{WAGO_750_1506_MODULE_IDENT, WAGO_750_1506_PRODUCT_ID},
         },
@@ -227,14 +230,26 @@ impl Wago750_354 {
                     module.has_tx = true;
                     module.has_rx = true;
                 }
+                WAGO_750_455_PRODUCT_ID => {
+                    module.has_tx = true;
+                    module.has_rx = false;
+                }
                 WAGO_750_501_PRODUCT_ID => {
                     module.has_tx = false;
                     module.has_rx = true;
                 }
+                WAGO_750_530_PRODUCT_ID => {
+                    module.has_tx = false;
+                    module.has_rx = true;
+                }
                 WAGO_750_652_PRODUCT_ID => {
                     module.has_tx = true;
                     module.has_rx = true;
                 }
+                WAGO_750_402_PRODUCT_ID => {
+                    module.has_tx = true;
+                    module.has_rx = false;
+                }
                 _ => println!(
                     "Wago-750-354 found Unknown/Unimplemented Module: {}",
                     ident_iom
@@ -259,6 +274,8 @@ impl Wago750_354 {
             let _ = self.get_pdo_offsets(device, false).await;
         });
 
+        println!("{:?}\n\n{:?}", self.tx_offsets, self.rx_offsets);
+
         for module in self.slots {
             match module {
                 Some(m) => {
@@ -267,15 +284,24 @@ impl Wago750_354 {
                         m.vendor_id,
                         m.product_id,
                     ) {
+                        WAGO_750_455_MODULE_IDENT => {
+                            Arc::new(RwLock::new(wago_750_455::Wago750_455::new()))
+                        }
                         WAGO_750_501_MODULE_IDENT => {
                             Arc::new(RwLock::new(wago_750_501::Wago750_501::new()))
                         }
+                        WAGO_750_530_MODULE_IDENT => {
+                            Arc::new(RwLock::new(wago_750_530::Wago750_530::new()))
+                        }
                         WAGO_750_1506_MODULE_IDENT => {
                             Arc::new(RwLock::new(wago_750_1506::Wago750_1506::new()))
                         }
                         WAGO_750_652_MODULE_IDENT => {
                             Arc::new(RwLock::new(wago_750_652::Wago750_652::new()))
                         }
+                        WAGO_750_402_MODULE_IDENT => {
+                            Arc::new(RwLock::new(wago_750_402::Wago750_402::new()))
+                        }
                         _ => {
                             println!(
                                 "{} Missing Implementation for Module Identification: vendor_id: {:?}, module ident: {:?} !",

ethercat-hal/src/devices/wago_modules/ip20_ec_di8_do8.rs

@@ -430,6 +430,9 @@ impl IP20EcDi8Do8 {
                             wago_750_652::WAGO_750_652_MODULE_IDENT => {
                                 Arc::new(RwLock::new(wago_750_652::Wago750_652::new()))
                             }
+                            wago_750_402::WAGO_750_402_MODULE_IDENT => {
+                                Arc::new(RwLock::new(wago_750_402::Wago750_402::new()))
+                            }
                             _ => {
                                 return;
                             }

ethercat-hal/src/devices/wago_modules/mod.rs

@@ -1,4 +1,7 @@
 pub mod ip20_ec_di8_do8;
 pub mod wago_750_1506;
+pub mod wago_750_402;
+pub mod wago_750_455;
 pub mod wago_750_501;
+pub mod wago_750_530;
 pub mod wago_750_652;