Rest API: Docs

Upgrade to zod v4

.github/workflows/electron.yml

@@ -3,50 +3,73 @@ name: Electron
 on:
   push:
     branches:
-      - "**"
+      - master
   pull_request:
     branches:
-      - "*"
+      - master
+
+defaults:
+  run:
+    working-directory: electron
 
 jobs:
-  build-electron:
+  build:
     runs-on: ubuntu-latest
-    defaults:
-      run:
-        working-directory: electron
 
     steps:
-      - name: Setup Node.js
+      - &checkout
+        name: Checkout
+        uses: actions/checkout@v4
+
+      - &setup-node
+        name: Setup Node.js
         uses: actions/setup-node@v4
         with:
-          node-version: "18" # or '20' for latest LTS
+          node-version: 20
+          cache: "npm"
+          cache-dependency-path: |
+            electron/package-lock.json
 
-      - uses: actions/checkout@v4
+      - &install
+        name: Install dependencies
+        run: npm ci
 
-      - name: Cache NPM dependencies
-        uses: actions/cache@v3
-        with:
-          path: |
-            ~/.npm
-            node_modules/
-          key: ${{ runner.os }}-npm-${{ hashFiles('**/package-lock.json') }}
-          restore-keys: |
-            ${{ runner.os }}-npm-
-
-      - name: Install
-        run: npm i
-
-      - name: Build
+      - name: Compile
         run: tsc
 
-      - name: Format
-        run: npm run format
+      - name: Build
+        run: npm run build
 
-      - name: Lint
-        run: npm run lint
+  test:
+    runs-on: ubuntu-latest
+    needs: build
+
+    steps:
+      - *checkout
+      - *setup-node
+      - *install
 
       - name: Test
         run: npm run test
 
-      - name: Package
-        run: npm run package
+  format:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *setup-node
+      - *install
+
+      - name: Format
+        run: npm run format
+
+  lint:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *setup-node
+      - *install
+
+      - name: Lint
+        run: npm run lint

.github/workflows/nix.yml

@@ -0,0 +1,96 @@
+name: Nix CI
+
+on:
+  push:
+    branches:
+      - master
+  pull_request:
+    branches:
+      - master
+
+env:
+  NIX_PATH: nixpkgs=channel:nixos-25.05
+
+jobs:
+  electron:
+    runs-on: ubuntu-latest
+
+    steps:
+      - &checkout
+        name: Check out repository
+        uses: actions/checkout@v4
+
+      - &nix-install
+        uses: nixbuild/nix-quick-install-action@v34
+        with:
+          nix_conf: |
+            keep-env-derivations = true
+            keep-outputs = true
+
+      - uses: nix-community/cache-nix-action@v6
+        with:
+          primary-key: nix-electron-${{ runner.os }}-${{ hashFiles('**/*.nix', '**/flake.lock', './electron/package-lock.json') }}
+          restore-prefixes-first-match: nix-${{ runner.os }}-
+          purge: true
+          purge-prefixes: nix-electron-${{ runner.os }}-
+
+      - name: Build Electron in Nix
+        run: nix build ".#packages.x86_64-linux.electron"
+
+  rust:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - uses: nix-community/cache-nix-action@v6
+        with:
+          primary-key: nix-server-${{ runner.os }}-${{ hashFiles('**/*.nix', '**/flake.lock', './Cargo.lock') }}
+          restore-prefixes-first-match: nix-${{ runner.os }}-
+          purge: true
+          purge-prefixes: nix-server-${{ runner.os }}-
+
+      - name: Build Server in Nix
+        run: nix build ".#packages.x86_64-linux.server"
+
+  build:
+    runs-on: ubuntu-latest
+    needs: [electron, rust]
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - name: Use both Electron and Server Nix Store
+        uses: nix-community/cache-nix-action@v6
+        with:
+          primary-key: nix-${{ runner.os }}-${{ hashFiles('**/*.nix', '**/flake.lock', './Cargo.lock', './electron/package-lock.json') }}
+
+          # if no hit on the primary key, merge individual caches
+          restore-prefixes-all-matches: |
+            nix-electron-${{ runner.os }}-
+            nix-server-${{ runner.os }}-
+
+      - name: Build Flake and System Configuration
+        run: nix build ".#nixosConfigurations.nixos.config.system.build.toplevel" --impure
+
+  format:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - name: Format
+        run: nix run 'nixpkgs#nixfmt-classic' $(find . nixos -name '*.nix')
+
+  check:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *nix-install
+
+      - name: Build Flake and Configuration.nix
+        run: nix flake check "." --impure

.github/workflows/rust.yml

@@ -3,9 +3,10 @@ name: Rust
 on:
   push:
     branches:
-      - "**"
+      - master
   pull_request:
-    branches: "*"
+    branches:
+      - master
 
 env:
   CARGO_TERM_COLOR: always
@@ -16,14 +17,24 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - name: Install libudev development package
+      - &udev-install
+        name: Install libudev development package
         run: sudo apt-get update && sudo apt-get install -y libudev-dev
-      - uses: actions/checkout@v4
-      - name: Set Rust version
-        run: rustup override set ${{ env.RUST_VERSION }}
-      - name: Install Formatter
-        run: rustup component add rustfmt
-      - name: Cache Rust dependencies
+
+      - &checkout
+        uses: actions/checkout@v4
+
+      - &setup-rust
+        name: Install Rust toolchain
+        uses: actions-rs/toolchain@v1
+        with:
+          toolchain: ${{ env.RUST_VERSION }}
+          profile: minimal
+          override: true
+          components: rustfmt
+
+      - &cargo-cache
+        name: Cache Rust dependencies
         uses: actions/cache@v3
         with:
           path: |
@@ -41,11 +52,36 @@ jobs:
           RUSTFLAGS: "-D warnings"
         run: cargo build --verbose
 
+  format:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *checkout
+      - *setup-rust
+
       - name: Format
         run: cargo fmt --check --verbose
 
+  test:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *udev-install
+      - *checkout
+      - *setup-rust
+      - *cargo-cache
+
       - name: Run tests
         run: cargo test --verbose
 
+  mock:
+    runs-on: ubuntu-latest
+
+    steps:
+      - *udev-install
+      - *checkout
+      - *setup-rust
+      - *cargo-cache
+
       - name: Mock Machine
-        run: cargo build --features development-build --features mock-machine
+        run: cargo build --features "development-build,mock-machine"

CHANGELOG.md

@@ -1,3 +1,24 @@
+# `2.13.0`
+_07.01.2026_
+
+## General
+- [#925](https://github.com/qitechgmbh/control/pull/925) Switch to Setup when selected machine is disconnected
+- [#937](https://github.com/qitechgmbh/control/pull/937) Added minimal Support for WAGO 
+- [#945](https://github.com/qitechgmbh/control/pull/945) Improvements for On-Screen Keyboard usage in Ethercat Setup Page
+- []
+
+## Extruder V3
+- [#930](https://github.com/qitechgmbh/control/pull/930) Added Extruder V3
+
+## Laser
+- [#924](https://github.com/qitechgmbh/control/pull/924) Roundness is now displayed as a percentage
+- [#885](https://github.com/qitechgmbh/control/pull/885) Added Min and Max Diameter
+- [#849](https://github.com/qitechgmbh/control/pull/849) Added a Warning if Filament is out of Spec
+
+## Aquapath
+- [#976](https://github.com/qitechgmbh/control/pull/976) Improved Stability
+
+
 # `2.12.0`
 _17.11.2025_
 

Cargo.lock

@@ -2825,9 +2825,9 @@ checksum = "8df9b6e13f2d32c91b9bd719c00d1958837bc7dec474d94952798cc8e69eeec3"
 
 [[package]]
 name = "tracing"
-version = "0.1.41"
+version = "0.1.44"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "784e0ac535deb450455cbfa28a6f0df145ea1bb7ae51b821cf5e7927fdcfbdd0"
+checksum = "63e71662fa4b2a2c3a26f570f037eb95bb1f85397f3cd8076caed2f026a6d100"
 dependencies = [
  "log",
  "pin-project-lite",
@@ -2837,9 +2837,9 @@ dependencies = [
 
 [[package]]
 name = "tracing-attributes"
-version = "0.1.30"
+version = "0.1.31"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "81383ab64e72a7a8b8e13130c49e3dab29def6d0c7d76a03087b3cf71c5c6903"
+checksum = "7490cfa5ec963746568740651ac6781f701c9c5ea257c58e057f3ba8cf69e8da"
 dependencies = [
  "proc-macro2",
  "quote",
@@ -2848,9 +2848,9 @@ dependencies = [
 
 [[package]]
 name = "tracing-core"
-version = "0.1.34"
+version = "0.1.36"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b9d12581f227e93f094d3af2ae690a574abb8a2b9b7a96e7cfe9647b2b617678"
+checksum = "db97caf9d906fbde555dd62fa95ddba9eecfd14cb388e4f491a66d74cd5fb79a"
 dependencies = [
  "once_cell",
  "valuable",

README.md

@@ -2,7 +2,12 @@
 
 # QiTech Control
 
-QiTech Control is an industrial control panel software for the next generation of QiTech recycling machines built on top of Beckhoff Automation hardware.
+QiTech Control is an open-source framework designed to bring modern software paradigms to certified industrial hardware.
+
+It frees developers from proprietary, license-heavy PLC ecosystems and rigid "point-and-click" workflows that are no longer adequate for today's complex automation challenges.
+
+QiTech Control combines the modularity and reliability of standard EtherCAT terminals (e.g., WAGO, Beckhoff) with the power of a modern Rust & React stack.
+
 
 [![](https://img.youtube.com/vi/KI3YeBwfV-s/maxresdefault.jpg)](https://www.youtube.com/watch?v=KI3YeBwfV-s)
 *Click here to watch a video demo of our software.*

control-core/Cargo.toml

@@ -21,7 +21,7 @@ smol = "2.0.2"
 socketioxide = "0.17.2"
 bitvec = { version = "1.0.1", features = ["alloc"] }
 crc = "3.3.0"
-tracing = "0.1.41"
+tracing = "0.1.44"
 erased-serde = "0.4.8"
 core_affinity = "0.8.3"
 control_core_derive = { version = "0.1.0", path = "../control-core-derive" }

control-core/src/ethernet/mod.rs

@@ -0,0 +1,65 @@
+use std::process::Command;
+
+use anyhow::Result;
+use interfaces::Interface;
+
+pub mod modbus_tcp_discovery;
+
+/// Returns true if the given network interface is Ethernet.
+/// Prevents testing wlan,loopback and other non ethernet devices
+fn is_ethernet(interface: &str) -> std::io::Result<bool> {
+    #[cfg(target_os = "linux")]
+    {
+        let base_path = format!("/sys/class/net/{}", interface);
+        let type_path = std::path::Path::new(&base_path).join("type");
+        let iface_type = std::fs::read_to_string(&type_path)?.trim().to_string();
+        // 1 means Ethernet
+        let reports_as_ethernet = iface_type == "1";
+        // Double-check that it's not a wireless interface
+        let uevent_path = std::path::Path::new(&base_path).join("uevent");
+        let uevent = std::fs::read_to_string(&uevent_path).unwrap_or_default();
+        // If "DEVTYPE=wlan" appears, it's lying
+        let actually_wifi = uevent.contains("DEVTYPE=wlan");
+        Ok(reports_as_ethernet && !actually_wifi)
+    }
+    #[cfg(not(target_os = "linux"))]
+    return Ok(true);
+}
+
+pub fn get_interfaces() -> Result<Vec<Interface>> {
+    let vec = Interface::get_all()
+        .map_err(|e| anyhow::anyhow!("Failed to get network interfaces: {}", e))?
+        .into_iter()
+        .filter(|iface| {
+            iface.is_up()
+                && iface.is_running()
+                && !iface.is_loopback()
+                && is_ethernet(&iface.name).unwrap_or(false)
+                && !iface.name.starts_with("bridge")
+                && !iface.name.starts_with("utun")   // Exclude tunnel interfaces
+                && !iface.name.starts_with("awdl")   // Exclude Apple Wireless Direct Link
+                && !iface.name.starts_with("anpi")   // Exclude Apple Network Privacy Interface
+                && !iface.name.starts_with("llw") // Exclude Apple low-latency WLAN
+        })
+        .collect::<Vec<_>>();
+    Ok(vec)
+}
+
+/// Sets a network interface to unmanaged by NetworkManager.
+/// Returns true if the command succeeded.
+pub fn set_interface_managed(interface: &str, managed: bool) -> bool {
+    let managed_str = match managed {
+        true => "yes",
+        false => "no",
+    };
+    tracing::info!(
+        "set_interface_managed for {} managed was set to: {}",
+        interface,
+        managed_str
+    );
+    let status = Command::new("nmcli")
+        .args(["dev", "set", interface, "managed", managed_str])
+        .status();
+
+    matches!(status, Ok(s) if s.success())
+}

control-core/src/ethernet/modbus_tcp_discovery.rs

@@ -0,0 +1,78 @@
+use crate::ethernet::get_interfaces;
+use crate::{futures::FutureIteratorExt, modbus::tcp::ModbusTcpDevice};
+use anyhow::{Result, bail};
+use interfaces::Interface;
+use std::cmp::min;
+use std::net::{IpAddr, Ipv4Addr, SocketAddr};
+
+pub struct ModbusTcpProbe {
+    pub addr: SocketAddr,
+    pub serial: u16,
+}
+
+pub async fn probe_modbus_tcp() -> Vec<ModbusTcpProbe> {
+    let interfaces = match get_interfaces() {
+        Ok(x) => x,
+        Err(_) => return vec![],
+    };
+
+    interfaces
+        .into_iter()
+        .map(probe_modbus_tcp_addresses)
+        .join_all()
+        .await
+        .into_iter()
+        .flatten()
+        .collect()
+}
+
+async fn probe_modbus_tcp_addresses(interface: Interface) -> Vec<ModbusTcpProbe> {
+    let out: Vec<ModbusTcpProbe> = interface
+        .addresses
+        .iter()
+        .filter_map(|addr| {
+            let a = addr.addr.map(|a| a.ip());
+            let m = addr.mask.map(|a| a.ip());
+
+            match (a, m) {
+                (Some(IpAddr::V4(addr)), Some(IpAddr::V4(mask))) => Some((addr, mask)),
+                _ => None,
+            }
+        })
+        .flat_map(|(addr, mask)| {
+            let a = u32::from(addr);
+            let m = u32::from(mask);
+            let network = a & m;
+
+            let prefix = min(24, m.count_ones()); // mask → prefix length
+            let size = 1u32 << (32 - prefix); // number of addresses
+
+            (0..size).map(move |i| SocketAddr::new(Ipv4Addr::from(network + i).into(), 502))
+        })
+        .map(|addr| smol::spawn(ping_modbus_device(addr)))
+        .join_all()
+        .await
+        .into_iter()
+        .filter_map(|x| x.ok())
+        .collect();
+
+    out
+}
+
+async fn ping_modbus_device(addr: SocketAddr) -> Result<ModbusTcpProbe> {
+    let mut device = ModbusTcpDevice::new(addr).await?;
+
+    let module_number1 = device.get_u32(0x2).await?;
+    let module_number2 = device.get_u32(0x4).await?;
+
+    if module_number1 != 0x2787_2144 || module_number2 != 0x0000_0000 {
+        bail!("Unknown modbus tcp device!");
+    }
+
+    let serial = device.get_u32(0x000A).await?;
+
+    Ok(ModbusTcpProbe {
+        addr,
+        serial: serial as u16,
+    })
+}

control-core/src/futures.rs

@@ -0,0 +1,26 @@
+use core::future::Future;
+
+// Extension trait for iterators of futures
+pub trait FutureIteratorExt<F>: Iterator<Item = F> + Sized
+where
+    F: Future,
+{
+    /// Await all futures and return their outputs
+    fn join_all(self) -> impl Future<Output = Vec<F::Output>>;
+}
+
+impl<I, F> FutureIteratorExt<F> for I
+where
+    I: Iterator<Item = F> + Sized,
+    F: Future,
+{
+    async fn join_all(self) -> Vec<F::Output> {
+        let mut out = Vec::new();
+
+        for fut in self {
+            out.push(fut.await);
+        }
+
+        out
+    }
+}

control-core/src/lib.rs

@@ -2,6 +2,8 @@ pub mod controllers;
 pub mod converters;
 pub mod downcast;
 pub mod ethercat;
+pub mod ethernet;
+pub mod futures;
 pub mod helpers;
 pub mod irq_handling;
 pub mod modbus;

control-core/src/modbus/mod.rs

@@ -1,4 +1,5 @@
 pub mod modbus_serial_interface;
+pub mod tcp;
 
 use anyhow::Error;
 use crc::{CRC_16_MODBUS, Crc};

control-core/src/modbus/tcp.rs

@@ -0,0 +1,263 @@
+use std::fmt::Debug;
+use std::io::ErrorKind;
+use std::net::SocketAddr;
+use std::time::Duration;
+
+use anyhow::Context;
+use anyhow::Result;
+use anyhow::bail;
+use smol::Timer;
+use smol::future::FutureExt;
+use smol::io;
+use smol::io::AsyncReadExt;
+use smol::io::AsyncWriteExt;
+use smol::net::TcpStream;
+
+const PROTOCOL_ID: u16 = 0;
+const UNIT_ID: u8 = 0;
+const READ_HOLDING_FUNCTION_CODE: u8 = 3;
+const WRITE_HOLDING_FUNCTION_CODE: u8 = 16;
+const READ_HOLDING_LENGTH: u16 = 6; // Unit ID 00 + Func Code 03 + Start Address XXXX + Quantity XXXX = 6 bytes
+const WRITE_HOLDING_LENGTH_WITHOUT_DATA: u16 = 7; // Unit ID 00 + Func Code 16 + Start Address XXXX + Quantity XXXX + Num Data Bytes XX = 7 bytes
+
+struct Packet {
+    buf: Vec<u8>,
+}
+
+impl Packet {
+    pub const fn new() -> Self {
+        Self { buf: Vec::new() }
+    }
+
+    pub fn add_u8(&mut self, x: u8) {
+        self.buf.push(x);
+    }
+
+    pub fn add_u16(&mut self, x: u16) {
+        let buf = x.to_be_bytes();
+        self.buf.push(buf[0]);
+        self.buf.push(buf[1]);
+    }
+
+    pub fn as_bytes(&self) -> &[u8] {
+        &self.buf
+    }
+}
+
+pub struct ModbusTcpDevice {
+    stream: TcpStream,
+    transactions: u16,
+}
+
+impl Debug for ModbusTcpDevice {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        match self.stream.peer_addr() {
+            Ok(addr) => write!(f, "ModbusTcpDevice({:?})", addr),
+            Err(_) => std::fmt::Result::Err(std::fmt::Error),
+        }
+    }
+}
+
+impl ModbusTcpDevice {
+    pub async fn new(addr: SocketAddr) -> Result<Self> {
+        let timeout = async {
+            Timer::after(Duration::from_millis(10)).await;
+            Err(io::Error::from(ErrorKind::TimedOut))
+        };
+
+        let stream = TcpStream::connect(addr)
+            .or(timeout)
+            .await
+            .context("Could not connect to modbus device!")?;
+
+        Ok(Self {
+            stream,
+            transactions: 0,
+        })
+    }
+
+    async fn read_and_check_responce_header(&mut self, func_code: u8) -> Result<()> {
+        if self.read_u16().await? != self.transactions {
+            bail!("Modbus device sent unexpected transaction id!");
+        }
+
+        if self.read_u16().await? != PROTOCOL_ID {
+            bail!("Modbus device sent unexpected protocol id!");
+        }
+
+        let length = self.read_u16().await?;
+        if length < 2 {
+            bail!("Modbus device will send too few bytes to understand the response!");
+        }
+
+        if self.read_u8().await? != UNIT_ID {
+            bail!("Modbus device sent unexpected unit id!");
+        }
+
+        let func_code_res = self.read_u8().await?;
+        if func_code != func_code_res {
+            let error_code = self.read_u8().await?;
+            bail!(
+                "Modbus device sent unexpected function code 0x{:x}! It probably encountered an error. Error code: 0x{:x}",
+                func_code_res,
+                error_code
+            );
+        }
+
+        Ok(())
+    }
+
+    async fn send_read_holding_request(&mut self, addr: u16, count: u16) -> Result<u16> {
+        let mut packet = Packet::new();
+
+        self.transactions += 1;
+        packet.add_u16(self.transactions);
+        packet.add_u16(PROTOCOL_ID);
+        packet.add_u16(READ_HOLDING_LENGTH);
+
+        packet.add_u8(UNIT_ID);
+        packet.add_u8(READ_HOLDING_FUNCTION_CODE);
+
+        packet.add_u16(addr);
+        packet.add_u16(count);
+
+        self.send(packet).await?;
+        self.read_and_check_responce_header(READ_HOLDING_FUNCTION_CODE)
+            .await?;
+
+        let num_data_bytes = self.read_u8().await? as u16;
+        if count * 2 != num_data_bytes {
+            bail!(
+                "Modbus device wants to send only a portion of the requested range - UNIMPLEMENTED!"
+            );
+        }
+
+        Ok(num_data_bytes)
+    }
+
+    pub async fn get_holding_registers(&mut self, addr: u16, count: u16) -> Result<Vec<u16>> {
+        self.send_read_holding_request(addr, count).await?;
+
+        let mut res: Vec<u16> = Vec::new();
+        while res.len() < count as usize {
+            res.push(self.read_u16().await?);
+        }
+
+        Ok(res)
+    }
+
+    pub async fn set_holding_registers(&mut self, addr: u16, values: &[u16]) -> Result<()> {
+        let count = values.len();
+        let num_bytes = count * 2;
+        assert!(
+            count <= 128,
+            "Cannot send that many bytes to modbus device in one go! Trying to send {} bytes of data.",
+            num_bytes
+        );
+
+        let mut packet = Packet::new();
+
+        self.transactions += 1;
+        packet.add_u16(self.transactions);
+        packet.add_u16(PROTOCOL_ID);
+        packet.add_u16(WRITE_HOLDING_LENGTH_WITHOUT_DATA + num_bytes as u16);
+
+        packet.add_u8(UNIT_ID);
+        packet.add_u8(WRITE_HOLDING_FUNCTION_CODE);
+
+        packet.add_u16(addr);
+        packet.add_u16(count as u16);
+
+        packet.add_u8(num_bytes as u8);
+
+        for value in values {
+            packet.add_u16(value.to_owned());
+        }
+
+        self.send(packet).await?;
+        self.read_and_check_responce_header(WRITE_HOLDING_FUNCTION_CODE)
+            .await?;
+
+        if self.read_u16().await? != addr {
+            bail!("Modbus device wrote to wrong register address!");
+        }
+
+        if self.read_u16().await? != count as u16 {
+            bail!("Modbus device wrote wrong number of registers!");
+        }
+
+        Ok(())
+    }
+
+    pub async fn get_string<const N: usize>(&mut self, addr: u16) -> Result<String> {
+        assert!(N % 2 == 0, "Strings are always of even length!");
+        assert!(N <= 256, "Cannot read long strings in a single swoop!");
+        let count = N / 2;
+
+        self.send_read_holding_request(addr, count as u16).await?;
+        let buf = self.read_bytes::<N>().await?;
+
+        let s = String::from_utf8_lossy(&buf);
+        let s = match s.split_once('\0') {
+            None => s.to_string(),
+            Some((l, _)) => l.to_string(),
+        };
+
+        Ok(s)
+    }
+
+    pub async fn set_string<const N: usize>(&mut self, _addr: u16, s: &str) -> Result<()> {
+        assert!(s.len() <= N, "String is too long to fit!");
+
+        todo!()
+    }
+
+    pub async fn get_u16(&mut self, addr: u16) -> Result<u16> {
+        let length = self.send_read_holding_request(addr, 1).await?;
+        assert_eq!(
+            length, 2,
+            "Expected modbus device to send exactly 2 bytes of data!"
+        );
+
+        self.read_u16().await
+    }
+
+    pub async fn get_u32(&mut self, addr: u16) -> Result<u32> {
+        let length = self.send_read_holding_request(addr, 2).await?;
+        assert_eq!(
+            length, 4,
+            "Expected modbus device to send exactly 4 bytes of data!"
+        );
+
+        let buf = self.read_bytes::<4>().await?;
+        Ok(u32::from_be_bytes(buf))
+    }
+
+    // We have to send the request in a single packet,
+    // otherwise the device may fail to respond correctly.
+    async fn send(&mut self, packet: Packet) -> Result<()> {
+        self.stream
+            .write_all(packet.as_bytes())
+            .await
+            .context("Could write to modbus device!")
+    }
+
+    async fn read_u8(&mut self) -> Result<u8> {
+        let buf = self.read_bytes::<1>().await?;
+        Ok(u8::from_be_bytes(buf))
+    }
+
+    async fn read_u16(&mut self) -> Result<u16> {
+        let buf = self.read_bytes::<2>().await?;
+        Ok(u16::from_be_bytes(buf))
+    }
+
+    async fn read_bytes<const N: usize>(&mut self) -> Result<[u8; N]> {
+        let mut buf = [0; N];
+        self.stream
+            .read_exact(&mut buf)
+            .await
+            .context("Could not read from modbus device!")?;
+        Ok(buf)
+    }
+}

docs/developer-docs/Xtrem_protocol.md

@@ -0,0 +1,139 @@
+# XTREM Communication Protocol
+
+**Version:** 3.007
+**Device:** XTREM / XTREM-S Weighing Module
+**Standard:** OIML R76:2006 / EN45501:2015 compliant
+
+---
+
+## Overview
+
+The **XTREM communication protocol** allows a terminal or host controller to exchange data and commands with the XTREM weighing module.
+The device transmits and receives ASCII-coded frames over a serial interface (RS232, RS485, Wi-Fi, or Ethernet, depending on configuration).
+
+Since we are using the Ethernet interface we need to provide some kind of DHCP to assign an IP - Address to each XTREM Device.
+They then may be addressed via a **broadcast** IP (e.g.: 192.168.4.255/24).
+A **Unicast** communication is applied through the device ID inside the XTREM Frame.
+
+---
+
+## Frame Structure
+
+Each message—both query and response—has the same format:
+
+```
+STX ID_O ID_D F D_ADDRESS D_L DATA LRC ETX
+```
+
+| Field         | Description                                       | Length (bytes) |
+| :------------ | :------------------------------------------------ | :------------: |
+| **STX**       | Start of message (ASCII `02h`)                    |        1       |
+| **ID_O**      | Sender address (2 ASCII hex chars)                |        2       |
+| **ID_D**      | Destination address (2 ASCII hex chars)           |        2       |
+| **F**         | Function code (`R`, `W`, `E`, etc.)               |        1       |
+| **D_ADDRESS** | Data address (register, 4 ASCII hex chars)        |        4       |
+| **D_L**       | Data length (2 ASCII hex chars)                   |        2       |
+| **DATA**      | Optional data field                               |    Variable    |
+| **LRC**       | Longitudinal Redundancy Check (2 ASCII hex chars) |        2       |
+| **ETX**       | End of message (ASCII `03h`)                      |        1       |
+
+In the default configuration the Frame also requires a CRLF at the end.
+
+**Example:**
+
+```
+STX ‘1’ ‘7’ ‘0’ ‘1’ ‘R’ ‘0’ ‘1’ ‘0’ ‘1’ ‘0’ ‘0’ LRC ETX CR LF
+```
+
+---
+
+## Function Codes
+
+| Function | ASCII | Hex | Description     |
+| :------- | :---- | :---| :-------------- |
+| **R**    | R     | 52h | Read request    |
+| **r**    | r     | 72h | Read response   |
+| **W**    | W     | 57h | Write request   |
+| **w**    | w     | 77h | Write response  |
+| **E**    | E     | 45h | Execute command |
+| **e**    | e     | 65h | Execute response|
+
+### Write response codes
+
+* `'0'` – OK
+* `'1'` – Write denied (sealed)
+* `'2'` – Read-only register
+* `'3'` – Invalid value / out of range
+
+### Execute response codes
+
+* `'0'` – Executed successfully
+* `'1'` – Blocked by seal switch
+
+---
+
+## LRC Calculation
+
+The **Longitudinal Redundancy Check** is a one-byte XOR of all message bytes, excluding:
+
+* `STX`
+* `ETX`
+* The LRC itself
+
+Example C function:
+
+```c
+unsigned char LRC(unsigned char* s) {
+    unsigned char lrc = 0;
+    while (*s) {
+        lrc ^= *(s++);
+    }
+    return lrc;
+}
+```
+
+Example Rust function:
+```rust
+pub fn compute_lrc(data: &[u8]) -> u8 {
+    data.iter().fold(0u8, |acc, &b| acc ^ b)
+}
+
+```
+
+---
+
+## Key Data Registers
+
+| Address (hex) | Description                | Type | Notes                                 |
+| :------------ | :------------------------- | :--: | :------------------------------------ |
+| **0000h**     | Serial number              |   R  | Factory-set                           |
+| **0001h**     | Device ID                  |  RW  | Network address                       |
+| **0007h**     | Hardware version           |   R  | Read-only                             |
+| **0008h**     | Software version           |   R  | Read-only                             |
+| **0009h**     | Sealing switch status      |   R  | `0=UNLOCK`, `1=LOCK`                  |
+| **0010h**     | Baud rate                  |  RW  | `0–4` → 9600–115200 baud              |
+| **0013h**     | Stream mode output rate    |  RW  | Time in ms                            |
+| **0100h**     | Device state               |   R  | Status bits (power, Wi-Fi, ADC, etc.) |
+| **0101h**     | Weight value               |   R  | Gross weight                          |
+| **0102h**     | Tare value                 |  RE  | Read/Execute                          |
+| **0103h**     | Net weight                 |   R  | Gross − Tare                          |
+| **0110h**     | ADC counts (instant)       |   R  | Raw ADC data                          |
+| **0111h**     | ADC counts (filtered)      |   R  | Post-filter data                      |
+| **1010h**     | Stop stream mode           |   E  | Execute                               |
+| **1011h**     | Start stream mode (weight) |   E  | Continuous output                     |
+| **9999h**     | Device reset               |   E  | Software reset                        |
+| **EEEEh**     | Factory reset              |   E  | Restores defaults                     |
+
+---
+
+## Post-Factory Reset Configuration
+
+After performing a factory reset, several registers must be configured to ensure proper operation of the device.
+
+Note: The unit may remain set to 'g' after a factory reset, but the values received may be in 'kg' depending on the device configuration.
+
+The following registers should be reviewed and set as required:
+1. **Address: 0022 | Max (Max1) (scale maximum capacity)**
+    The default value for this register may vary between devices (e.g., 60000 or 6000). Set this value to 6000 to ensure correct operation.
+2. **Address: 0023 | e (e1) (scale interval)**
+3. **Address: 0026 | Decimal position**

docs/machines/README.md

@@ -1,40 +0,0 @@
-# Machine Documentation
-
-This directory contains documentation for QiTech machines.
-
-## Structure
-
-```
-docs/machines/
-├── manuals/          # Machine operation manuals (markdown files)
-│   ├── extruder.md
-│   ├── winder.md
-│   ├── laser.md
-│   └── mock.md
-├── extruder/         # Machine-specific documentation
-├── winder/
-├── laser/
-└── mock/
-```
-
-## Images
-
-All manual images are stored in: **`electron/public/images/manuals/[machine-name]/`**
-
-For example:
-- Winder images: `electron/public/images/manuals/winder/`
-- Extruder images: `electron/public/images/manuals/extruder/`
-- Laser images: `electron/public/images/manuals/laser/`
-
-### Image References in Manuals
-
-When referencing images in manual markdown files (located in `docs/machines/manuals/`), use relative paths:
-
-```markdown
-![Image description](../../../../electron/public/images/manuals/[machine-name]/image.png)
-```
-
-## Adding Images
-
-1. Place images in: `electron/public/images/manuals/[machine-name]/`
-2. Reference in markdown: `../../../../electron/public/images/manuals/[machine-name]/your-image.png`

docs/nixos/README.md

@@ -10,7 +10,7 @@ This is why we chose nixos
 # How we do updates
 1. The user selects a version (commit/branch/tag) of the software they want to install
 2. The repo is cloned to the local machine
-3. the `installInfo.nix` is created and commited locally. It contains infos like the commit hash, branch, tag, timestamp etc. These are later available as environment variables `QITECH_OS...`
+3. Information like the commit hash, branch, tag, timestamp etc. is passed to the nix build process as environment variables `QITECH_OS...`
 4. The `nixos-switch` command is run. After rebuilding & compiling the software the system reboots.
    - The nixos-switch command does the following:
    1. The system is built with the new configuration
@@ -21,4 +21,4 @@ This is why we chose nixos
 
 # More Docs
 - [Implementation Details](./details.md)
-- [Fresh Installation Quick Start guide](./quick-start.md)
+- [Fresh Installation Quick Start guide](./quick-start.md)

docs/rest-api.md

@@ -0,0 +1,235 @@
+# REST API `/api/v2`
+
+The Qitech Control Panel exposes a small HTTP interface for discovering machines and reading their current values. All examples below assume you are connected to the panel’s Ethernet subnet and talk directly to the panel at:
+
+- **Base URL:** `http://10.10.10.1:3001`
+
+> **Schema note:** This documentation intentionally stays light on field details beyond what is shown in the examples. For the exact datatypes and complete payload shapes, refer to the corresponding Rust types (linked below).
+
+---
+
+## Authentication
+
+The panel does **not** perform HTTP authentication. The expected security model is **network-level isolation**: anything that can send packets to the panel’s Ethernet interface is treated as trusted. This matches common security assumptions in EtherCAT-style control networks.
+
+The panel is configured to administer its own subnet `10.10.10.0/24` via DHCP, while Wi-Fi can be used for upstream internet connectivity (if configured). If you need authentication or access from outside the isolated subnet, place a router/device in **client/bridge mode** on the panel network and expose the panel through a **reverse proxy** where you can add authentication, logging, rate limiting, etc.
+
+If DNS is available on the subnet, you may be able to resolve `qitech.control`; otherwise use the static address `10.10.10.1`.
+
+---
+
+## List machines `GET /api/v2/machine`
+
+Returns the set of machines currently known/connected to the panel.
+
+Machines are identified by:
+
+- `slug`: the machine type / model identifier (string)
+- `serial`: the specific machine instance identifier (int)
+
+Each machine also includes a `legacy_id` to support older **v1** workflows. If a machine reports an issue, the `error` field may be present and non-null (containing an error message).
+
+### Example request
+
+```bash
+curl -X GET "http://10.10.10.1:3001/api/v2/machine"
+```
+
+### Example response
+
+```json
+{
+  "machines": [
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 7
+        },
+        "serial": 57922
+      },
+      "serial": 57922,
+      "vendor": "QiTech",
+      "slug": "mock",
+      "error": null
+    },
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 4
+        },
+        "serial": 57922
+      },
+      "serial": 57922,
+      "vendor": "QiTech",
+      "slug": "extruder_v1",
+      "error": null
+    },
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 2
+        },
+        "serial": 57922
+      },
+      "serial": 57922,
+      "vendor": "QiTech",
+      "slug": "winder_v1",
+      "error": null
+    },
+    {
+      "legacy_id": {
+        "machine_identification": {
+          "vendor": 1,
+          "machine": 10
+        },
+        "serial": 48879
+      },
+      "serial": 48879,
+      "vendor": "QiTech",
+      "slug": "wago_power_v1",
+      "error": null
+    }
+  ]
+}
+```
+
+---
+
+## Get current values `GET /api/v2/machine/<slug>/<serial>`
+
+Returns all currently known values for a single machine.
+
+Values are categorized into two groups:
+
+- **State**: requested/commanded values (these typically change only after a state-change request, or if another controller updates them)
+- **Live Values**: measured/observed values coming from the machine and potentially changing quickly
+
+This REST endpoint returns **only the current snapshot**, not a stream of live values.
+To receive continuous updates (via WebSockets), subscribe to the machine namespace (see **WebSockets** below).
+
+### Example request (mock machine)
+
+```bash
+curl -X GET "http://10.10.10.1:3001/api/v2/machine/mock/57922"
+```
+
+### Example response
+
+```json
+{
+  "machine": {
+    "legacy_id": {
+      "machine_identification": {
+        "vendor": 1,
+        "machine": 7
+      },
+      "serial": 57922
+    },
+    "serial": 57922,
+    "vendor": "QiTech",
+    "slug": "mock",
+    "error": null
+  },
+  "state": {
+    "frequency1": 100.0,
+    "frequency2": 200.0,
+    "frequency3": 500.0,
+    "is_default_state": false,
+    "mode_state": {
+      "mode": "Running"
+    }
+  },
+  "live_values": {
+    "amplitude1": -0.03438523433309566,
+    "amplitude2": -0.06872980145477608,
+    "amplitude3": -0.1711138370170743,
+    "amplitude_sum": -0.27422887280494607
+  }
+}
+```
+
+---
+
+## Change machine state `POST /api/v1/machine/<slug>/<serial>`
+
+State changes are submitted as **mutations**. The mutation payload is defined per machine type in Rust. Conceptually, each item in the mutation list represents a setter-style operation that is applied by the real-time control loop.
+
+The API does **not** return the newly-applied state in the POST response. The panel runs a real-time loop and generally won’t block waiting for the physical system to converge. Instead:
+
+- Submit the mutation via `POST`
+- Poll `GET /api/v2/machine/<slug>/<serial>` to observe the updated state and/or any reported errors
+
+### Example request (mock machine)
+
+```bash
+curl -X POST \
+  -d  \
+  -H "Content-Type: application/json" \
+  "http://10.10.10.1:3001/api/v1/machine/mock/57922"
+```
+
+### Example response
+
+```json
+null
+```
+
+---
+
+## WebSockets
+
+For continuous updates, subscribe to a machine-specific namespace derived from its `legacy_id`:
+
+- Namespace: `/machine/<vendor>/<id>/<serial>`
+
+The stream emits events for:
+
+- state changes (`StateEvent`)
+- live value updates (`LiveValuesEvent`)
+
+Both event payloads use the same machine-specific schema as the `/api/v2` REST responses.
+
+---
+
+## List of all machines
+
+Below is a template you can fill with links to the relevant Rust types (mutations + state/live structs).
+For each machine, link to:
+
+- **Mutations:** the request payload type used by `POST /api/v1/machine/<slug>/<serial>`
+- **State / Live Values:** the response payload types returned by `GET /api/v2/machine/<slug>/<serial>`
+
+### Machines
+
+- **winder_v1**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/winder2/api.rs#L87>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/winder2/api.rs#L163>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/winder2/api.rs#L143>
+
+- **extruder_v1**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder1/api.rs#L214>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder1/api.rs#L89>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder1/api.rs#L55>
+
+- **laser_v1**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/laser/api.rs#L88>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/laser/api.rs#L32>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/laser/api.rs#L17>
+
+- **mock**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/mock/api.rs#L84>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/mock/api.rs#L38>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/mock/api.rs#L24>
+
+- **extruder_v2**
+
+  - Mutations: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder2/api.rs#L126>
+  - State: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder2/api.rs#L93>
+  - Live Values: <https://github.com/qitechgmbh/control/blob/1ec20074e9030a0ed1739ca9d9a77e298a2652a3/machines/src/extruder2/api.rs#L59>

electron/.gitignore

@@ -88,6 +88,7 @@ typings/
 # Vite
 .vite/
 dist/
+dist-electron/
 
 # Electron-Forge
 out/

electron/forge.config.ts

@@ -1,59 +0,0 @@
-import type { ForgeConfig } from "@electron-forge/shared-types";
-import { MakerSquirrel } from "@electron-forge/maker-squirrel";
-import { MakerZIP } from "@electron-forge/maker-zip";
-import { MakerDeb } from "@electron-forge/maker-deb";
-import { MakerRpm } from "@electron-forge/maker-rpm";
-import { VitePlugin } from "@electron-forge/plugin-vite";
-import { FusesPlugin } from "@electron-forge/plugin-fuses";
-import { FuseV1Options, FuseVersion } from "@electron/fuses";
-
-const config: ForgeConfig = {
-  packagerConfig: {
-    executableName: "electron-shadcn",
-    asar: true,
-    icon: "src/assets/icon",
-  },
-  rebuildConfig: {},
-  makers: [
-    new MakerSquirrel({}),
-    new MakerZIP({}, ["darwin"]),
-    new MakerRpm({}),
-    new MakerDeb({}),
-  ],
-  plugins: [
-    new VitePlugin({
-      // `build` can specify multiple entry builds, which can be Main process, Preload scripts, Worker process, etc.
-      // If you are familiar with Vite configuration, it will look really familiar.
-      build: [
-        {
-          // `entry` is just an alias for `build.lib.entry` in the corresponding file of `config`.
-          entry: "src/main.ts",
-          config: "vite.main.config.ts",
-        },
-        {
-          entry: "src/preload.ts",
-          config: "vite.preload.config.ts",
-        },
-      ],
-      renderer: [
-        {
-          name: "main_window",
-          config: "vite.renderer.config.ts",
-        },
-      ],
-    }),
-    // Fuses are used to enable/disable various Electron functionality
-    // at package time, before code signing the application
-    new FusesPlugin({
-      version: FuseVersion.V1,
-      [FuseV1Options.RunAsNode]: false,
-      [FuseV1Options.EnableCookieEncryption]: true,
-      [FuseV1Options.EnableNodeOptionsEnvironmentVariable]: false,
-      [FuseV1Options.EnableNodeCliInspectArguments]: false,
-      [FuseV1Options.EnableEmbeddedAsarIntegrityValidation]: true,
-      [FuseV1Options.OnlyLoadAppFromAsar]: true,
-    }),
-  ],
-};
-
-export default config;

electron/forge.env.d.ts

@@ -1,35 +0,0 @@
-export {}; // Make this a module
-
-declare global {
-  // This allows TypeScript to pick up the magic constants that's auto-generated by Forge's Vite
-  // plugin that tells the Electron app where to look for the Vite-bundled app code (depending on
-  // whether you're running in development or production).
-  const MAIN_WINDOW_VITE_DEV_SERVER_URL: string;
-  const MAIN_WINDOW_VITE_NAME: string;
-
-  namespace NodeJS {
-    interface Process {
-      // Used for hot reload after preload scripts.
-      viteDevServers: Record<string, import("vite").ViteDevServer>;
-    }
-  }
-
-  type VitePluginConfig = ConstructorParameters<
-    typeof import("@electron-forge/plugin-vite").VitePlugin
-  >[0];
-
-  interface VitePluginRuntimeKeys {
-    VITE_DEV_SERVER_URL: `${string}_VITE_DEV_SERVER_URL`;
-    VITE_NAME: `${string}_VITE_NAME`;
-  }
-}
-
-declare module "vite" {
-  interface ConfigEnv<
-    K extends keyof VitePluginConfig = keyof VitePluginConfig,
-  > {
-    root: string;
-    forgeConfig: VitePluginConfig;
-    forgeConfigSelf: VitePluginConfig[K][number];
-  }
-}

electron/package.json

@@ -6,10 +6,8 @@
   "main": ".vite/build/main.js",
   "private": true,
   "scripts": {
-    "start": "electron-forge start",
-    "package": "electron-forge package",
-    "make": "electron-forge make",
-    "publish": "electron-forge publish",
+    "start": "vite",
+    "build": "vite build",
     "lint": "eslint .",
     "lint:write": "eslint . --fix",
     "format": "prettier --check .",
@@ -22,15 +20,6 @@
   },
   "author": "",
   "devDependencies": {
-    "@electron-forge/cli": "^7.6.1",
-    "@electron-forge/maker-deb": "^7.8.0",
-    "@electron-forge/maker-rpm": "^7.8.3",
-    "@electron-forge/maker-squirrel": "^7.6.1",
-    "@electron-forge/maker-zip": "^7.6.1",
-    "@electron-forge/plugin-auto-unpack-natives": "^7.6.1",
-    "@electron-forge/plugin-fuses": "^7.10.2",
-    "@electron-forge/plugin-vite": "^7.6.1",
-    "@electron-forge/shared-types": "^7.4.0",
     "@electron/fuses": "^1.8.0",
     "@eslint/compat": "^1.2.6",
     "@eslint/js": "^9.18.0",
@@ -62,6 +51,8 @@
     "typescript": "^5.7.3",
     "typescript-eslint": "^8.24.1",
     "vite": "^6.4.1",
+    "vite-plugin-electron": "^0.29.0",
+    "vite-plugin-electron-renderer": "^0.14.6",
     "vitest": "^3.0.6"
   },
   "dependencies": {
@@ -84,7 +75,6 @@
     "@tanstack/react-router": "^1.130.17",
     "@tanstack/react-table": "^8.21.2",
     "@tanstack/router-devtools": "^1.105.0",
-    "@tanstack/zod-adapter": "^1.116.0",
     "@vitejs/plugin-react": "^4.5.2",
     "babel-plugin-react-compiler": "^19.0.0-beta-714736e-20250131",
     "class-variance-authority": "^0.7.1",
@@ -110,8 +100,8 @@
     "tailwindcss-animate": "^1.0.7",
     "uplot": "^1.6.32",
     "xlsx": "^0.18.5",
-    "zod": "^3.24.2",
-    "zod-validation-error": "^3.4.0",
+    "zod": "^4.3.5",
+    "zod-validation-error": "^5.0.0",
     "zustand": "^5.0.8"
   }
 }

electron/src/assets/markdown/extruder/manual.md

@@ -1,65 +1,4 @@
-![Titelseite,screenshot from Word doccument](/images/manuals/extruder/Titelseite.jpeg)
-
-<!-- Datasheet: Added below Titelseite. Placeholder images to be replaced with final exports. -->
-
-# QiTech Pro Extruder – Datasheet
-
-![Datasheet Header](/images/manuals/extruder/datasheet/header.png)
-
-## Included Assemblies
-Electrical cabinet · Temperature controller · Frequency inverter · Cable routing + connection to QiTech Control (digital control)
-
-## Motor
-| Specification | Value |
-| ------------- | ----- |
-| Motor power | 1.5 kW |
-| Output speed | 41 rpm |
-| Output torque | 336 Nm |
-| Transmission ratio | 34:2 |
-| Service factor cG | 1.4 |
-| Voltage / Frequency | 400 V / 50 Hz |
-| Efficiency class | IE3 (Premium Efficiency) |
-| Efficiency @ 100% rated load / % rated current (std. voltage) | 5.98 / 3.45 A |
-| Protection class | IP55, Insulation class F |
-| Construction design | Flange design, terminal box top |
-| Shaft end (d×L) | 40 × 80 mm |
-
-## Melt Pressure Sensor (DSI1-1/2-500-F-15)
-| Specification | Value |
-| ------------- | ----- |
-| Output signal | 4–20 mA (2-conductor) |
-| Sensor system | Mercury-free |
-| Sensor | DMS Vollbrückentechnik |
-| Measuring accuracy | 0.5 % |
-| Calibration signal | 80 % |
-| Supply voltage | 15–32 VDC |
-| Measuring range | 0–500 bar |
-| Temperature range (membrane) | max. 410 °C |
-| Temperature range (sensor head) | max. 85 °C |
-| Screw-in thread | 1/2"–20 UNF |
-
-## Extruder Barrel & Screw
-Nitrided extruder barrel (Ø 65 mm). Screw hardened from high‑alloyed steel (Ø 25 mm).
-
-## Heating Elements & Temperature Sensors
-3 heating zones (max. 350 °C), Heater 415 V, 3 × 750 W. 3× Type K temperature sensors, 1/8" NPT.
-
-## Hopper
-Volume: 4 L · Material: Aluminum · Easily detachable.
-
-## Dimensions
-
-![Dimensions](/images/manuals/extruder/datasheet/dimensions.png)
-
-Overall length 1365 mm · Width 220 mm · Height 384 mm.
-
-Fully wired and assembled (raised on 2 aluminum profiles).
-
-Delivery time after completion: 2–5 working days.
-
-Warranty: 24 months after delivery (excluding wearing parts).
-
-<br>
+![Titelseite,screenshot from Word doccument](images/manuals/extruder/Titelseite.jpeg)
 
 <br>
 
@@ -116,7 +55,7 @@ Darmstadt, 10/06/2025
 
 64392 Darmstadt,
 
-<img src="/images/manuals/extruder/signature.jpeg" width="300" height="60"/>
+<img src="images/manuals/extruder/signature.jpeg" width="300" height="60"/>
 
 Milan von dem Bussche
 
@@ -162,7 +101,7 @@ Operating instructions
 
 # 1 Machine description
 
-![maschinenbeschreibung](/images/manuals/extruder/description.jpeg)
+![maschinenbeschreibung](images/manuals/extruder/description.jpeg)
 
 <br><br><br>
 
@@ -229,7 +168,7 @@ Accuracy class: 2
 
 | Picture                                       | Danger!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |
 | --------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
 
 <br><br><br>
 
@@ -237,17 +176,17 @@ Accuracy class: 2
 
 | Pictogram                                  | Description of pictogram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   | Pictogram                                  | Pictogram Description                                                                                                                                                                                                    |
 | ------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| ![w001](/images/manuals/extruder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](/images/manuals/extruder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
-| ![w008](/images/manuals/extruder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](/images/manuals/extruder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
-| ![w011](/images/manuals/extruder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](/images/manuals/extruder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
-| ![w004](/images/manuals/extruder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](/images/manuals/extruder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
-| ![w012](/images/manuals/extruder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](/images/manuals/extruder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
-| ![w017](/images/manuals/extruder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](/images/manuals/extruder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
-| ![w018](/images/manuals/extruder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](/images/manuals/extruder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
-| ![w019](/images/manuals/extruder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](/images/manuals/extruder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
-| ![w024](/images/manuals/extruder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](/images/manuals/extruder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
-| ![w025](/images/manuals/extruder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                            |                                                                                                                                                                                                                          |
-| ![w016](/images/manuals/extruder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                            |                                                                                                                                                                                                                          |
+| ![w001](images/manuals/extruder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](images/manuals/extruder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
+| ![w008](images/manuals/extruder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](images/manuals/extruder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
+| ![w011](images/manuals/extruder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](images/manuals/extruder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
+| ![w004](images/manuals/extruder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](images/manuals/extruder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
+| ![w012](images/manuals/extruder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](images/manuals/extruder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
+| ![w017](images/manuals/extruder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](images/manuals/extruder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
+| ![w018](images/manuals/extruder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](images/manuals/extruder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
+| ![w019](images/manuals/extruder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](images/manuals/extruder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
+| ![w024](images/manuals/extruder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](images/manuals/extruder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
+| ![w025](images/manuals/extruder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                            |                                                                                                                                                                                                                          |
+| ![w016](images/manuals/extruder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                            |                                                                                                                                                                                                                          |
 
 <br><br><br>
 
@@ -255,15 +194,15 @@ Accuracy class: 2
 
 | Prohibition signs Pictogram                                               | Pictogram description                                                                   | International pictograms / other Pictogram                                               | Pictogram Description                                                       |
 | ------------------------------------------------------------------------- | --------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------- | --------------------------------------------------------------------------- |
-| <img src="/images/manuals/extruder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="/images/manuals/extruder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
-| <img src="/images/manuals/extruder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="/images/manuals/extruder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
-| <img src="/images/manuals/extruder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="/images/manuals/extruder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
-| <img src="/images/manuals/extruder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="/images/manuals/extruder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
-| <img src="/images/manuals/extruder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="/images/manuals/extruder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
-| <img src="/images/manuals/extruder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="/images/manuals/extruder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
-| <img src="/images/manuals/extruder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="/images/manuals/extruder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
-| <img src="/images/manuals/extruder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                          |                                                                             |
-| <img src="/images/manuals/extruder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                          |                                                                             |
+| <img src="images/manuals/extruder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="images/manuals/extruder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
+| <img src="images/manuals/extruder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="images/manuals/extruder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
+| <img src="images/manuals/extruder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="images/manuals/extruder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
+| <img src="images/manuals/extruder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="images/manuals/extruder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
+| <img src="images/manuals/extruder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="images/manuals/extruder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
+| <img src="images/manuals/extruder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="images/manuals/extruder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
+| <img src="images/manuals/extruder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="images/manuals/extruder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
+| <img src="images/manuals/extruder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                          |                                                                             |
+| <img src="images/manuals/extruder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                          |                                                                             |
 
 <br><br><br>
 
@@ -336,7 +275,7 @@ The machine has a main switch that disconnects/connects the mains supply. The ON
 
 The emergency stop switch is used to quickly stop the machine in the event of danger. This is designed with redundant emergency stop contactors. An emergency stop switching device also prevents the machine from being switched on again after a power failure. By activating the emergency stop device, the entire machine is shut down and disconnected from the mains supply.
 
-![emergency stop button / switch](/images/manuals/extruder/emergency_stop.jpeg)
+![emergency stop button / switch](images/manuals/extruder/emergency_stop.jpeg)
 
 Hazardous movements are brought to a controlled standstill as quickly as possible. The machine can only be restarted by physically resetting the emergency stop switch and then starting one of the operating modes in the software.
 
@@ -418,11 +357,11 @@ Depending on the activity or the duration of the activity, the operator must det
 <br><br>
 | Picture | Danger |
 |---------|--------|
-| ![Warning](/images/manuals/extruder/w001.jpeg)|**Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves.
+| ![Warning](images/manuals/extruder/w001.jpeg)|**Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves.
 
 | Picture                                       | Caution!                                                                                                                                                                                                                                                                    |
 | --------------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Danger to life due to incorrect installation and commissioning!** <brErrors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Danger to life due to incorrect installation and commissioning!** <brErrors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
 
 <br>
 <br>
@@ -451,7 +390,7 @@ The CEE plug of the extruder must be plugged into a suitable three-phase socket
 
 The machines are delivered with the newest version of the software installed. Updates, as well as previous updates and the software version can be viewed under Setup-> Updates. If a new version of the software is available, it will be displayed here. To perform the update an internet connection is required. In the next step, click the red "Select" button next to the chosen update. The display will now shut down, and when it is turned back on, the latest version of the software will be installed.
 
-![screenshot updates](/images/manuals/extruder/screenshot_updates.png)
+![screenshot updates](images/manuals/extruder/screenshot_updates.png)
 
 <br>
 
@@ -492,7 +431,7 @@ Then start the machine as follows:
 - Set the “target temperature” of the individual heating zones according to the melting material in the 3 input fields
 - Set the “target temperature” of the nozzle
 - After reaching the target temperature, wait 15 minutes until the machine has heated through and the plastic in the screw barrel has completely melted.
-  ![Screenshot: set traget temperature](/images/manuals/extruder/screenshot_adjust_heat.png)
+  ![Screenshot: set traget temperature](images/manuals/extruder/screenshot_adjust_heat.png)
 
 <br>
 
@@ -504,7 +443,7 @@ Then start the machine as follows:
 - Press the "Extrude" button in the “mode” box
 - Wait until old melt has been "flushed" out of the extruder, i.e. no more discolouration of the filament is no longer discoloured and a constant material flow has been achieved
 
-![screenshot: adjust screw speed](/images/manuals/extruder/screenshot_extruder_adjustscrew_speed.png)
+![screenshot: adjust screw speed](images/manuals/extruder/screenshot_extruder_adjustscrew_speed.png)
 
 <br>
 
@@ -532,7 +471,7 @@ Then start the machine as follows:
 - Go to "Config" in the funktion bar
 - To set the screw direction click on "Forward" or "Backward" in the "Invert settings" box
 
-![Changing screrw direction](/images/manuals/extruder/screenshot_config.png)
+![Changing screrw direction](images/manuals/extruder/screenshot_config.png)
 
 <br>
 
@@ -556,7 +495,7 @@ Then start the machine as follows:
 
 | Picture                                       | DANGER!                                                                                                                                                                                                                                                                  |
 | --------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Danger to life due to operation of the machine in a faulty condition.** <br> If safety-relevant changes or defects occur on the machine, shut it down immediately, secure it against being switched on again and report the incident to the responsible office/person! |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Danger to life due to operation of the machine in a faulty condition.** <br> If safety-relevant changes or defects occur on the machine, shut it down immediately, secure it against being switched on again and report the incident to the responsible office/person! |
 
 <br>
 <br>
@@ -594,11 +533,11 @@ If further work is necessary, such as replacing the extruder screw, please conta
 
 | Picture                                       | Caution!                                                                      |
 | --------------------------------------------- | ----------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Observe the instructions for maintenance work when servicing the machine!** |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Observe the instructions for maintenance work when servicing the machine!** |
 
 | Picture                                       | Caution!                                                                                                                           |
 | --------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg) | **Risk of screw breakage if disassembled while hot!** <br> Screw connections may only be loosened when the system has cooled down. |
+| ![Warning](images/manuals/extruder/w001.jpeg) | **Risk of screw breakage if disassembled while hot!** <br> Screw connections may only be loosened when the system has cooled down. |
 
 <br>
 <br>
@@ -681,15 +620,15 @@ Appliances with this logo on the packaging or on the appliance must be disposed
 
 | Picture                                                                 | Danger!                                                                                                                                                                                                                                                                                                                   |
 | ----------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
-| <img src="/images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The extruder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                         |
-| <img src="/images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
-| <img src="/images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the extruder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                           |
-| <img src="/images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
-| <img src="/images/manuals/extruder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
-| <img src="/images/manuals/extruder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
-| <img src="/images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
-| <img src="/images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
+| <img src="images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
+| <img src="images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The extruder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                         |
+| <img src="images/manuals/extruder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
+| <img src="images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the extruder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                           |
+| <img src="images/manuals/extruder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
+| <img src="images/manuals/extruder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
+| <img src="images/manuals/extruder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
+| <img src="images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
+| <img src="images/manuals/extruder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
 
 <br>
 <br>
@@ -735,7 +674,7 @@ The following persons must not work on the machine:
 
 | Picture                                                                                                                 | DANGER!                                                                                                                                  |
 | ----------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/extruder/w001.jpeg)                                                                           | **Risk of injury due to insufficient qualification!** Improper handling can lead to considerable personal injury and damage to property. |
+| ![Warning](images/manuals/extruder/w001.jpeg)                                                                           | **Risk of injury due to insufficient qualification!** Improper handling can lead to considerable personal injury and damage to property. |
 | - Special activities may only be carried out by the persons specified in the respective chapters of these instructions. |
 
 <br>
@@ -764,24 +703,24 @@ The following persons must not work on the machine:
 
 ## Electrical Diagrams
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 1](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025-001.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 1](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025-001.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 2](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_2-002.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 2](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_2-002.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 3](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_3-003.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 3](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_3-003.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 4](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_4-004.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 4](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_4-004.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 5](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_5-005.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 5](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_5-005.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 6](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_6-006.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 6](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_6-006.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 7](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_7-007.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 7](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_7-007.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 8](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_8-008.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 8](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_8-008.png)
 
-![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 9](/images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_9-009.png)
+![QiTech Pro Extruder Electrical Diagram 2025 - Sheet 9](images/manuals/extruder/QiTech_Pro_Extruder_Electrical_Diagram_2025_9-009.png)
 
 ## Mechanical Diagrams
 
-![QiTech Pro Extruder Nozzle 2025](/images/manuals/extruder/Nozzle.png)
+![QiTech Pro Extruder Nozzle 2025](images/manuals/extruder/Nozzle.png)

electron/src/assets/markdown/winder/manual.md

@@ -1,88 +1,4 @@
-![Titelseite,screenshot from Word doccument](/images/manuals/winder/Titelseite.jpeg)
-
-<br>
-
-# Data sheet: QiTech Pro Winder
-
-![datasheet header illustration](/images/manuals/winder/datasheet/header.png)
-
-Short description:
-
-The QiTech Pro Winder is a machine for winding and rewinding 3D printing filaments and other strand materials. It is an improvement upon the proven QiTech Winder with support for multiple filament diameters, spools up to 5 kg, angular speeds up to 20 m/min and automatic adjustment of the winding speed depending on the filament tension.
-
-It consists of a pulling unit, a tension arm, a filament guiding traverse and the spool axis. It is controlled by a computer using the QiTech Control software. The traverse movement ensures a clean wind of the filament on the spool. Automatic load adjustment allows for tight winding without having to manually readjust the winding speed each layer. A laser in the traverse allows for easy calibration of the spool width.
-
-<br>
-
-## Scope of delivery
-
-| # | Item                                      |
-| - | ----------------------------------------- |
-| 1 | QiTech Pro Winder                         |
-| 2 | 2x Spool Carrier-Pins                     |
-| 3 | 4x Weights for tension arm                |
-| 4 | 230V/110V to 24V Power Supply             |
-| 5 | USB C to USB A cable                      |
-| 6 | USB Drive with QiTech Control software    |
-| 7 | Operating manual                          |
-| 8 | optional: wheeled frame                   |
-
-<br>
-
-## Dimensions and Weight
-
-![dimensions top view](/images/manuals/winder/datasheet/dimensions-top.png)
-![dimensions front view](/images/manuals/winder/datasheet/gestell.png)
-
-|                | no frame | incl. frame |
-| -------------- | -------- | ----------- |
-| Weight         | 20 kg    | 35 kg       |
-| Length (1)     | 91 cm    | 91 cm       |
-| Width (2)      | 50 cm    | 50 cm       |
-| Height (3)     | 42 cm    | 134 cm      |
-
-<br>
-
-## Requirements of the Spool
-
-The QiTech Pro Winder is compatible with almost all spools. The spool is rotated by a Carrier-Pin and secured against lateral slipping by a quick release mechanism. The maximum spool weight is 5 kg.
-
-![min/max spool dimensions](/images/manuals/winder/datasheet/spool-min-max.png)
-
-<br>
-
-## Winding Speed
-
-How many meters of filament can be wound per minute at maximum speed depends on the inner diameter of the spool/how much filament has already been wound. The resulting path speed determines how much filament can be wound up in a given time. We take a usual spool with an inner diameter of 100 mm to calculate an expected maximum speed. If the inner diameter is larger, the maximum speed shifts upwards.
-
-Winding Speed:
-
-- Min.: 0.5 Meters/Minute
-- Max.: 20 Meters/Minute
-
-<br>
-
-## Friction of the puller rolls
-
-Since the diameter of the extruded filament depends primarily on the pulling speed of the Pro Winder, it is important that it remains constant. This is ensured on the one hand by the use of a stepper motor as drive. At the same time, a vulcanized PU coating of the rolls and a spring-increased contact pressure make the filament only slip through from approx. 30 N tension.
-
-<br>
-
-## Auto-Stop function
-
-When extruding or rewinding, it is often the case that a specific amount of meters must be wound onto a spool. The QiTech Pro Winder has an integrated filament length measurement. For example, after 100 m, it can automatically switch from "wind" to "pull" mode. In addition, the operator is alerted acoustically that the spool has finished winding.
-
-![auto stop ui placeholder](/images/manuals/winder/datasheet/autostop-ui.png)
-
-<br>
-
-## Electronics / Power consumption
-
-| Specification         | Value                      |
-| --------------------- | -------------------------- |
-| Mains connection      | 230V/50Hz or 110V/60Hz     |
-| Ø Load in operation   | 3A at 24V                  |
-| Ø Consumption in use  | 72 Wh                      |
+![Titelseite,screenshot from Word doccument](images/manuals/winder/Titelseite.jpeg)
 
 <br>
 
@@ -139,7 +55,7 @@ Darmstadt, 10/06/2025
 
 64392 Darmstadt,
 
-<img src="/images/manuals/winder/signature.jpeg" width="300" height="60"/>
+<img src="images/manuals/winder/signature.jpeg" width="300" height="60"/>
 
 Milan von dem Bussche
 
@@ -185,7 +101,7 @@ Operating instructions
 
 # 1 Machine description
 
-![maschinenbeschreibung](/images/manuals/winder/description.png)
+![maschinenbeschreibung](images/manuals/winder/description.png)
 
 | Item number | Item number Description                   |
 | ----------- | ----------------------------------------- |
@@ -270,7 +186,7 @@ Accuracy class: 2
 
 | Picture                                     | Danger!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               |
 | ------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| ![Warning](/images/manuals/winder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
+| ![Warning](images/manuals/winder/w001.jpeg) | **Danger to life due to technically faulty machine.** <br> The machine may only be used when it is in perfect technical condition and in accordance with its intended use, in a safety-conscious and hazard-conscious manner and in compliance with these operating instructions. All faults, especially those that could impair safety, must be rectified immediately before starting the winder. Everyone who works on or with the Qitech Winder is responsible for observing these safety aspects! |
 
 <br><br><br>
 
@@ -278,17 +194,17 @@ Accuracy class: 2
 
 | Pictogram                                | Description of pictogram                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   | Pictogram                                | Pictogram Description                                                                                                                                                                                                    |
 | ---------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
-| ![w001](/images/manuals/winder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](/images/manuals/winder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
-| ![w008](/images/manuals/winder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](/images/manuals/winder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
-| ![w011](/images/manuals/winder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](/images/manuals/winder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
-| ![w004](/images/manuals/winder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](/images/manuals/winder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
-| ![w012](/images/manuals/winder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](/images/manuals/winder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
-| ![w017](/images/manuals/winder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](/images/manuals/winder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
-| ![w018](/images/manuals/winder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](/images/manuals/winder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
-| ![w019](/images/manuals/winder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](/images/manuals/winder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
-| ![w024](/images/manuals/winder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](/images/manuals/winder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
-| ![w025](/images/manuals/winder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                          |                                                                                                                                                                                                                          |
-| ![w016](/images/manuals/winder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                          |                                                                                                                                                                                                                          |
+| ![w001](images/manuals/winder/w001.jpeg) | W001 General warning sign The combination of the symbol W001 and the signal word **"Danger"** indicates an imminently hazardous situation which, if not avoided death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Warning"** indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. death or serious injury if it is not avoided. The combination of the symbol W001 and the signal word **"Caution"** indicates an imminently hazardous situation which, if not avoided death or serious injury if not avoided. | ![m001](images/manuals/winder/m001.jpeg) | M001 General warning sign Mandatory sign This combination of symbol and signal word indicates a potentially hazardous situation which, if not avoided, may result in damage to property or the environment. not avoided. |
+| ![w008](images/manuals/winder/w008.jpeg) | W008 Warning of risk of falling                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m003](images/manuals/winder/m003.jpeg) | M003 Use hearing protection                                                                                                                                                                                              |
+| ![w011](images/manuals/winder/w011.jpeg) | W011 Warning of danger of slipping                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m004](images/manuals/winder/m004.jpeg) | M004 Use eye protection                                                                                                                                                                                                  |
+| ![w004](images/manuals/winder/w004.jpeg) | W004 Warning of laser beam                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | ![m008](images/manuals/winder/m008.jpeg) | M008 Use foot protection                                                                                                                                                                                                 |
+| ![w012](images/manuals/winder/w012.jpeg) | W012 Warning of electrical voltage                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m009](images/manuals/winder/m009.jpeg) | M009 Use hand protection                                                                                                                                                                                                 |
+| ![w017](images/manuals/winder/w017.jpeg) | W017 Warning of hot surface                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                | ![m010](images/manuals/winder/m010.jpeg) | M010 Use protective clothing                                                                                                                                                                                             |
+| ![w018](images/manuals/winder/w018.jpeg) | W018 Warning against automatic start-up                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    | ![m012](images/manuals/winder/m012.jpeg) | M012 Use handrail                                                                                                                                                                                                        |
+| ![w019](images/manuals/winder/w019.jpeg) | W019 Warning of crushing hazard                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            | ![m021](images/manuals/winder/m021.jpeg) | M021 Switch off before maintenance or repair                                                                                                                                                                             |
+| ![w024](images/manuals/winder/w024.jpeg) | W024 Warning against hand injuries                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         | ![m014](images/manuals/winder/m014.jpeg) | M014 Use head protection                                                                                                                                                                                                 |
+| ![w025](images/manuals/winder/w025.jpeg) | W025 Warning against counter-rotating rollers                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              |                                          |                                                                                                                                                                                                                          |
+| ![w016](images/manuals/winder/w016.jpeg) | W016 Warning of toxic substances                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           |                                          |                                                                                                                                                                                                                          |
 
 <br><br><br>
 
@@ -296,15 +212,15 @@ Accuracy class: 2
 
 | Prohibition signs Pictogram                                             | Pictogram description                                                                   | International pictograms / other Pictogram                                             | Pictogram Description                                                       |
 | ----------------------------------------------------------------------- | --------------------------------------------------------------------------------------- | -------------------------------------------------------------------------------------- | --------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="/images/manuals/winder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
-| <img src="/images/manuals/winder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="/images/manuals/winder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
-| <img src="/images/manuals/winder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="/images/manuals/winder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
-| <img src="/images/manuals/winder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="/images/manuals/winder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
-| <img src="/images/manuals/winder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="/images/manuals/winder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
-| <img src="/images/manuals/winder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="/images/manuals/winder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
-| <img src="/images/manuals/winder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="/images/manuals/winder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
-| <img src="/images/manuals/winder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                        |                                                                             |
-| <img src="/images/manuals/winder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                        |                                                                             |
+| <img src="images/manuals/winder/p001.jpeg" width="158" height="158"/>   | P001 General prohibition sign                                                           | <img src="images/manuals/winder/f001.jpeg" width="158" height="158">                   | F001 Fire extinguisher                                                      |
+| <img src="images/manuals/winder/p002.jpeg" width="158" height="158"/>   | P002 No smoking                                                                         | <img src="images/manuals/winder/ANIS_danger.jpeg" width="232" height="60">             | ANSI Z535.3 - DANGER                                                        |
+| <img src="images/manuals/winder/p003.jpeg" width="158" height="158"/>   | P003 No open flames; fire, open source of ignition and smoking prohibited               | <img src="images/manuals/winder/ANIS_warning.jpeg" width="232" height="60">            | ANSI Z535.3 - WARNING                                                       |
+| <img src="images/manuals/winder/p006.jpeg" width="158" height="158"/>   | P006 Prohibited for industrial trucks                                                   | <img src="images/manuals/winder/ANIS_caution.jpeg" width="232" height="60">            | ANSI Z535.3 - CAUTION                                                       |
+| <img src="images/manuals/winder/p009.jpeg" width="158" height="158"/>   | P009 Climbing prohibited - In the sense of climbing prohibited for unauthorized persons | <img src="images/manuals/winder/ANIS_notice.jpeg" width="232" height="60">             | ANSI Z535.3 - NOTICE                                                        |
+| <img src="images/manuals/winder/p022.jpeg" width="158" height="158"/>   | P022 Eating and drinking prohibited                                                     | <img src="images/manuals/winder/ANIS_safetyinstructions.jpeg" width="232" height="60"> | ANSI Z535.3 - SAFETY INSTRUCTIONS                                           |
+| <img src="images/manuals/winder/p024.jpeg" width="158" height="158"/>   | P024 Entering the area prohibited                                                       | <img src="images/manuals/winder/trashcan.jpeg" width="158" height="158">               | Symbol for separate collection of waste electrical and electronic equipment |
+| <img src="images/manuals/winder/p031.jpeg" width="158" height="158"/>   | P031 Switching prohibited                                                               |                                                                                        |                                                                             |
+| <img src="images/manuals/winder/D-p006.jpeg" width="158" height="158"/> | D-P006 Access prohibited for unauthorized persons                                       |                                                                                        |                                                                             |
 
 <br><br><br>
 
@@ -342,7 +258,7 @@ In addition, the following procedures must be regarded as misuse:
 
 <br><br><br>
 
-![spool sizes](/images/manuals/winder/spools.jpeg)
+![spool sizes](images/manuals/winder/spools.jpeg)
 
 <br><br><br>
 
@@ -370,7 +286,7 @@ Hazardous movements are brought to a controlled standstill as quickly as possibl
 
 <br>
 
-<img src="/images/manuals/winder/emergency_stop.jpeg" width="300" height="300"/>
+<img src="images/manuals/winder/emergency_stop.jpeg" width="300" height="300"/>
 
 <br>
 
@@ -427,8 +343,8 @@ Depending on the activity or the duration of the activity, the operator must det
 <br><br>
 | Picture | Danger |
 |---------|--------|
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves. |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to incorrect installation and commissioning!** <br> Errors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury due to improper transport** <br> Be careful when loading the machine, do not place any limbs under the parts when setting them down, do not stand under suspended loads or between moving loads and walls or machine parts. Wear personal protective equipment: safety shoes, protective work clothing, protective gloves. |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to incorrect installation and commissioning!** <br> Errors during installation can lead to life-threatening situations or cause considerable damage to property. Installation and commissioning may only be carried out by the manufacturer's employees. |
 
 <br><br>
 
@@ -448,7 +364,7 @@ The machines are delivered with the newest version of the software installed. Up
 
 <br>
 
-![screenshot of update tab](/images/manuals/winder/screenshot_updates.png)
+![screenshot of update tab](images/manuals/winder/screenshot_updates.png)
 
 <br>
 
@@ -496,7 +412,7 @@ Then start the machine as follows:
 
 <br>
 
-![screenshot outer limit](/images/manuals/winder/screenshot_traverse.png)
+![screenshot outer limit](images/manuals/winder/screenshot_traverse.png)
 
 <br>
 
@@ -519,7 +435,7 @@ The **padding** parameter creates a safety margin that prevents the filament fro
 
 The default padding is 0.88mm, but you can adjust this value in the Control settings based on your filament diameter and winding requirements. Larger filaments may require more padding, while smaller filaments can use less padding for maximum spool utilization.
 
-![Padding example](/images/manuals/winder/winder_padding_example_image.jpg)
+![Padding example](images/manuals/winder/winder_padding_example_image.jpg)
 
 <br>
 
@@ -532,7 +448,7 @@ The default padding is 0.88mm, but you can adjust this value in the Control sett
 
 <br>
 
-![screernshot target speed](/images/manuals/winder/screenshot_targetspeed.png)
+![screernshot target speed](images/manuals/winder/screenshot_targetspeed.png)
 
 <br>
 
@@ -598,7 +514,7 @@ All settings such as the position of the spool sides, the winding speed or the f
 
 | Picture                                                               | Danger!                                                                                                                                                                                                                                           |
 | --------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to operation of the machine in faulty condition** <br> If safety-relevant changes or defects occur on the machine, shut down immediately, secure against restarting and report the process to the responsible office/person! |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger to life due to operation of the machine in faulty condition** <br> If safety-relevant changes or defects occur on the machine, shut down immediately, secure against restarting and report the process to the responsible office/person! |
 
 <br><br>
 
@@ -642,14 +558,14 @@ The polyurethane coating of the puller rollers will inevitably wear out over tim
 
 Now remove the black plastic caps and simply pull out the puller rollers. To install the new rollers back on, slide them on the axes, put the plastic cap back on and screw the screws.
 
-<img src="/images/manuals/winder/swapping_out_rollers.jpeg" width="300" height="400"/>
+<img src="images/manuals/winder/swapping_out_rollers.jpeg" width="300" height="400"/>
 
 <br>
 <br>
 
 | Picture                                                               | Caution!                                                                  |
 | --------------------------------------------------------------------- | ------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | Observe the instructions for maintenance work when servicing the machine! |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | Observe the instructions for maintenance work when servicing the machine! |
 
 <br>
 <br>
@@ -714,7 +630,7 @@ The machine consists largely of aluminum and plastic and can be easily separated
 
 | Picture                                                                   | Disposal Instructions                                                                                                                                                                                                                                                                                            |
 | ------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/trashcan.jpeg" width="150" height="150"/> | Appliances with this logo on the packaging or on the appliance must be disposed of separately. These devices must not be disposed of with normal household waste. You are responsible for ensuring that any electrical or electronic waste is disposed of at the appropriate locations, e.g., recycling centers. |
+| <img src="images/manuals/winder/trashcan.jpeg" width="150" height="150"/> | Appliances with this logo on the packaging or on the appliance must be disposed of separately. These devices must not be disposed of with normal household waste. You are responsible for ensuring that any electrical or electronic waste is disposed of at the appropriate locations, e.g., recycling centers. |
 
 <br><br><br>
 
@@ -722,15 +638,15 @@ The machine consists largely of aluminum and plastic and can be easily separated
 
 | Picture                                                               | Danger!                                                                                                                                                                                                                                                                                                                   |
 | --------------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The winder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                           |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
-| <img src="/images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the winder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                             |
-| <img src="/images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
-| <img src="/images/manuals/winder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
-| <img src="/images/manuals/winder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
-| <img src="/images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
-| <img src="/images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of getting caught, pulled in or pulled along by moving parts of the machine** <br> Do not wear loose long hair, loose clothing or jewelry! There is always a risk of getting caught, pulled in or pulled along by moving parts!                                                                                  |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Operation only permitted with protective devices fitted!** <br> The winder may only be operated with properly fitted and functioning safety guards. The operator is responsible for ensuring that all protective devices are properly fitted.                                                                           |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Danger of cutting tensioned filament** <br> The stretched filament must not be touched between the puller and the spool. Danger of cutting! Do not wind any pointed, sharp-edged or particularly thin materials!                                                                                                        |
+| <img src="images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electric shock** <br> Before carrying out any repair, set-up or maintenance work, the winder must be de-energised by disconnecting the mains plug! Pull out the mains plug!                                                                                                                                             |
+| <img src="images/manuals/winder/w012.jpeg" width="150" height="150"/> | **Electrostatic charges on the puller and spool** <br> Friction of the filament on the puller rollers and on the spool can lead to electrostatic charges. There is a risk of minor electric shocks! Do not touch the affected areas, but keep a sufficient distance!                                                      |
+| <img src="images/manuals/winder/w018.jpeg" width="150" height="150"/> | **Automatic speed adjustment of puller, reel and traverse** <br> The bobbin automatically adjusts its speed to keep the winding pressure constant. The traverse automatically adjusts its speed to the reel in order to maintain the same travel distance per revolution.                                                 |
+| <img src="images/manuals/winder/w025.jpeg" width="150" height="150"/> | **Feeding of body parts** <br> Extreme caution is required in the area of the puller and spool axle! There is an acute danger of getting caught or pulled in! Make sure you wear close-fitting clothing! Always keep the emergency stop switch within easy reach so that it can be activated immediately in an emergency. |
+| <img src="images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing when threading the filament** <br> Exercise extreme caution when threading the filament through the puller rollers! There is a risk of crushing between the upper and lower pair of rollers.                                                                                                           |
+| <img src="images/manuals/winder/w024.jpeg" width="150" height="150"/> | **Risk of crushing between the traversing unit and machine housing** <br> Exercise extreme caution when moving the traverser towards the housing! Do not place any limbs in the gap!                                                                                                                                      |
 
 # 4 Glossary and Definitions
 
@@ -771,7 +687,7 @@ The following persons may not work on the machine:
 
 | Picture                                                               | Danger!                                                                                                                                                                                                                                                     |
 | --------------------------------------------------------------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| <img src="/images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury if insufficiently qualified!** <br> Improper handling can lead to considerable personal injury and damage to property. Special activities may only be carried out by the persons specified in the relevant sections of these instructions. |
+| <img src="images/manuals/winder/w001.jpeg" width="150" height="150"/> | **Risk of injury if insufficiently qualified!** <br> Improper handling can lead to considerable personal injury and damage to property. Special activities may only be carried out by the persons specified in the relevant sections of these instructions. |
 
 <br>
 <br>
@@ -800,12 +716,12 @@ The following persons may not work on the machine:
 
 ## Electrical Diagrams
 
-![QiTech Pro Winder Electrical Diagram - Sheet 1](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram-001.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 1](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram-001.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 2](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_2-002.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 2](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_2-002.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 3](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_3-003.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 3](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_3-003.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 4](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_4-004.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 4](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_4-004.png)
 
-![QiTech Pro Winder Electrical Diagram - Sheet 5](/images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_5-005.png)
+![QiTech Pro Winder Electrical Diagram - Sheet 5](images/manuals/winder/QiTech_Pro_Winder_Electrical_Diagram_5-005.png)

electron/src/client/socketioStore.ts

@@ -8,8 +8,7 @@ import { z } from "zod";
 import { toastError, toastZodError } from "@/components/Toast";
 import { MachineIdentificationUnique } from "@/machines/types";
 import { FPS_30 } from "@/lib/constants";
-import { mainNamespaceStore, createMainNamespaceStore } from "./mainNamespace";
-import { softReloadMainNamespaceStore } from "./softReload";
+import { mainNamespaceStore } from "./mainNamespace";
 
 /**
  * Simple buffer-based store updater to limit React re-renders to ~30 FPS
@@ -385,11 +384,11 @@ const useSocketioStore = create<SocketioStore>()((set, get) => ({
   },
 
   decrementNamespace: (namespaceId: NamespaceId) => {
-    const namespace_path = serializeNamespaceId(namespaceId);
+    /*const namespace_path = serializeNamespaceId(namespaceId);
 
     // check if the namespace exists
     const namespace = get().namespaces[namespace_path];
-    /*if (namespace) {
+    if (namespace) {
       set(
         produce((state: SocketioStore) => {
           // decrement the count

electron/src/components/ManualMarkdown.tsx

@@ -1,67 +0,0 @@
-import React from "react";
-import { Markdown } from "./Markdown";
-
-type ManualMarkdownProps = {
-  /**
-   * The markdown content to render
-   */
-  markdownContent: string;
-};
-
-/**
- * A specialized Markdown component for rendering machine manuals.
- *
- * This component transforms image paths in markdown to work correctly in the Electron app.
- * Manual markdown files are stored in `docs/machines/manuals/` with relative image paths
- * pointing to `../../../../electron/public/images/manuals/[machine-name]/...`
- *
- * This component transforms those paths to absolute paths `/images/manuals/[machine-name]/...`
- * that work correctly in the Electron app's context.
- *
- * Path transformation examples:
- * - `../../../../electron/public/images/manuals/winder/image.png` → `/images/manuals/winder/image.png`
- * - `images/manuals/winder/image.png` → `/images/manuals/winder/image.png`
- */
-export function ManualMarkdown({ markdownContent }: ManualMarkdownProps) {
-  const transformedContent = React.useMemo(() => {
-    // Transform image paths to work in Electron context
-    // Pattern 1: ../../../../electron/public/images/manuals/... → /images/manuals/...
-    let content = markdownContent.replace(
-      /!\[([^\]]*)\]\(\.\.\/\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^)]+)\)/g,
-      "![$1](/$2)",
-    );
-
-    // Pattern 2: ../../../electron/public/images/manuals/... → /images/manuals/... (backward compatibility)
-    content = content.replace(
-      /!\[([^\]]*)\]\(\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^)]+)\)/g,
-      "![$1](/$2)",
-    );
-
-    // Pattern 3: images/manuals/... → /images/manuals/... (for backward compatibility)
-    content = content.replace(
-      /!\[([^\]]*)\]\(images\/manuals\/([^)]+)\)/g,
-      "![$1](/images/manuals/$2)",
-    );
-
-    // Pattern 4: Handle <img> tags with src attribute (new path)
-    content = content.replace(
-      /<img\s+([^>]*)src="\.\.\/\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^"]+)"/g,
-      '<img $1src="/$2"',
-    );
-
-    // Pattern 5: Handle <img> tags with src attribute (old path)
-    content = content.replace(
-      /<img\s+([^>]*)src="\.\.\/\.\.\/\.\.\/electron\/public\/(images\/manuals\/[^"]+)"/g,
-      '<img $1src="/$2"',
-    );
-
-    content = content.replace(
-      /<img\s+([^>]*)src="images\/manuals\/([^"]+)"/g,
-      '<img $1src="/images/manuals/$2"',
-    );
-
-    return content;
-  }, [markdownContent]);
-
-  return <Markdown text={transformedContent} />;
-}

electron/src/components/MarkdownWithToc.tsx

@@ -1,6 +1,5 @@
 import React from "react";
 import { Markdown } from "./Markdown";
-import { ManualMarkdown } from "./ManualMarkdown";
 import { MarkdownToc } from "./MarkdownToc";
 
 type MarkdownWithTocProps = {
@@ -27,11 +26,6 @@ type MarkdownWithTocProps = {
    * @default "top-4"
    */
   stickyTop?: string;
-  /**
-   * Whether this is a machine manual (enables image path transformation)
-   * @default false
-   */
-  isManual?: boolean;
 };
 
 /**
@@ -50,19 +44,12 @@ export function MarkdownWithToc({
   tocWidth = "w-64",
   gap = "gap-6",
   stickyTop = "top-6",
-  isManual = false,
 }: MarkdownWithTocProps) {
-  const MarkdownComponent = isManual ? ManualMarkdown : Markdown;
-
   return (
     <div className={`flex ${gap}`}>
       {/* Main Content */}
       <div className="min-w-0 flex-1">
-        {isManual ? (
-          <ManualMarkdown markdownContent={markdownContent} />
-        ) : (
-          <Markdown text={markdownContent} />
-        )}
+        <Markdown text={markdownContent} />
       </div>
 
       {/* Table of Contents Sidebar */}

electron/src/components/preset/NewPresetDialog.tsx

@@ -1,4 +1,3 @@
-import { PresetData, PresetSchema } from "@/lib/preset/preset";
 import {
   Dialog,
   DialogContent,
@@ -14,13 +13,13 @@ import { Separator } from "../ui/separator";
 import { PresetPreviewEntries, PresetPreviewTable } from "./PresetPreviewTable";
 import { Input } from "../ui/input";
 
-export type NewPresetDialogProps<T extends PresetSchema> = {
-  currentState?: PresetData<T>;
+export type NewPresetDialogProps<T> = {
+  currentState?: T;
   previewEntries: PresetPreviewEntries<T>;
   onSave: (name: string) => void;
 };
 
-export function NewPresetDialog<T extends PresetSchema>({
+export function NewPresetDialog<T>({
   currentState,
   onSave,
   previewEntries,

electron/src/components/preset/PresetCard.tsx

@@ -60,7 +60,7 @@ export function PresetCardMenu({
   );
 }
 
-export type PresetCardProps<T extends PresetSchema> = {
+export type PresetCardProps<T> = {
   preset: Preset<T>;
   onApply: (preset: Preset<T>) => void;
   onOverwrite: (preset: Preset<T>) => void;
@@ -72,7 +72,7 @@ export type PresetCardProps<T extends PresetSchema> = {
   isActive?: boolean;
 };
 
-export function PresetCard<T extends PresetSchema>({
+export function PresetCard<T>({
   preset,
   onApply,
   onOverwrite,

electron/src/components/preset/PresetPreviewTable.tsx

@@ -1,28 +1,27 @@
 import React, { Fragment } from "react";
-import { PresetData, PresetSchema } from "@/lib/preset/preset";
 import { renderUnitSymbol, renderUnitSyntax, Unit } from "@/control/units";
 
 export const previewSeparator = undefined;
 
 type PreviewSeparator = typeof previewSeparator;
 
-type PresetPreviewEntry<T extends PresetSchema> = {
+type PresetPreviewEntry<T> = {
   name: string;
   unit?: Unit;
-  renderValue: (data: PresetData<T>) => string | undefined;
+  renderValue: (data: T) => string | undefined;
 };
 
-export type PresetPreviewEntries<T extends PresetSchema> = (
+export type PresetPreviewEntries<T> = (
   | PresetPreviewEntry<T>
   | PreviewSeparator
 )[];
 
-export type PresetPreviewTableProps<T extends PresetSchema> = {
-  data: PresetData<T>;
+export type PresetPreviewTableProps<T> = {
+  data?: T;
   entries: PresetPreviewEntries<T>;
 };
 
-export function PresetPreviewTable<T extends PresetSchema>({
+export function PresetPreviewTable<T>({
   data,
   entries,
 }: PresetPreviewTableProps<T>) {
@@ -39,7 +38,7 @@ export function PresetPreviewTable<T extends PresetSchema>({
           );
         }
 
-        const value = entry.renderValue(data);
+        const value = data !== undefined ? entry.renderValue(data) : undefined;
         return (
           <Fragment key={entry.name}>
             <div>{entry.name}</div>

electron/src/components/preset/PresetShowDialog.tsx

@@ -1,4 +1,4 @@
-import { Preset, PresetSchema } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import {
   Dialog,
   DialogContent,
@@ -13,14 +13,14 @@ import { Icon } from "../Icon";
 import { Separator } from "../ui/separator";
 import { PresetPreviewEntries, PresetPreviewTable } from "./PresetPreviewTable";
 
-export type PresetShowDialogProps<T extends PresetSchema> = {
+export type PresetShowDialogProps<T> = {
   preset: Preset<T>;
   previewEntries: PresetPreviewEntries<T>;
   onApply: (preset: Preset<T>) => void;
   hideDate?: boolean;
 };
 
-export function PresetShowDialog<T extends PresetSchema>({
+export function PresetShowDialog<T>({
   preset,
   onApply,
   previewEntries,

electron/src/components/preset/PresetsPage.tsx

@@ -2,19 +2,19 @@ import React from "react";
 import { ControlGrid } from "@/control/ControlGrid";
 import { Page } from "@/components/Page";
 import { usePresets, UsePresetsParams } from "@/lib/preset/usePresets";
-import { Preset, PresetSchema } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import { PresetCard } from "./PresetCard";
 import { PresetPreviewEntries } from "./PresetPreviewTable";
 import { NewPresetDialog } from "./NewPresetDialog";
 import { downloadJson } from "@/lib/download";
 import { JsonFileInput } from "../FileInput";
 
-type PresetsPageProps<T extends PresetSchema> = UsePresetsParams<T> & {
+type PresetsPageProps<T> = UsePresetsParams<T> & {
   applyPreset: (preset: Preset<T>) => void;
   previewEntries: PresetPreviewEntries<T>;
 };
 
-export function PresetsPage<T extends PresetSchema>({
+export function PresetsPage<T>({
   applyPreset,
   machine_identification,
   currentState,

electron/src/control/EditValue.tsx

@@ -36,7 +36,6 @@ type Props = {
   maxSlider?: number; // Override the slider max value
   maxLabel?: string;
   step?: number;
-  valueSchema?: z.ZodType<number>;
   inverted?: boolean;
   confirmation?: string;
   renderValue: (value: number) => string;
@@ -89,7 +88,6 @@ export function EditValue({
   description,
   defaultValue,
   step = 1,
-  valueSchema: schema,
   inverted,
   min,
   max,
@@ -104,7 +102,7 @@ export function EditValue({
 
   // Form setup
   const formSchema = z.object({
-    value: schema ?? z.number(),
+    value: z.number(),
   });
   type FormSchema = z.infer<typeof formSchema>;
 
@@ -191,7 +189,6 @@ export function EditValue({
     const numericValue = parseFloat(normalizedInput);
     const hasValidationError =
       isNaN(numericValue) ||
-      (schema && !schema.safeParse(numericValue).success) ||
       (max !== undefined && numericValue > max) ||
       (min !== undefined && numericValue < min);
 
@@ -222,15 +219,7 @@ export function EditValue({
       setValueStringError(false);
       preventFormSyncRef.current = false;
     }
-  }, [
-    valueString,
-    valueStringDirty,
-    schema,
-    max,
-    min,
-    form,
-    roundToStepDecimals,
-  ]);
+  }, [valueString, valueStringDirty, max, min, form, roundToStepDecimals]);
 
   // Reset input state to clean form value
   const resetInput = React.useCallback(() => {

electron/src/control/units.tsx

@@ -28,10 +28,9 @@ export function getUnitIcon(unit: Unit): IconName {
     case "Hz":
       return "lu:AudioWaveform";
     case "W":
-      return "lu:Zap";
     case "V":
-      return "lu:Zap";
     case "A":
+    case "mA":
       return "lu:Zap";
     case "kWh":
       return "lu:BatteryFull";
@@ -82,6 +81,8 @@ export function renderUnitSymbol(unit: Unit | undefined): string {
       return "W";
     case "V":
       return "V";
+    case "mA":
+      return "mA";
     case "A":
       return "A";
     case "kWh":
@@ -105,11 +106,11 @@ export function renderUnitSymbol(unit: Unit | undefined): string {
   }
 }
 
+// this function will add prefix/suffix to the valueString but without unit symbol.
 // example
-// value: 10.0
-// -> valueString: "10" (custom input)
-// this function will add prefix/suffix to the valueString but without unit symbol
-// -> "10°"
+//   const f = 3.1415;
+//   renderUnitSyntax(f.toFixed(2), "deg")
+// result: "3.14°"
 export function renderUnitSyntax(
   valueString: string | undefined,
   unit: Unit | undefined,
@@ -155,6 +156,8 @@ export function renderUnitSymbolLong(unit: Unit): string {
       return "watts";
     case "V":
       return "volts";
+    case "mA":
+      return "milliamperes";
     case "A":
       return "amperes";
     case "kWh":
@@ -192,6 +195,7 @@ export const units = [
   "Hz",
   "W",
   "V",
+  "mA",
   "A",
   "kWh",
   "l/min",

electron/src/lib/objects.ts

@@ -1,4 +1,7 @@
-export function deepEquals<T>(a: T, b: T): boolean {
+export function deepEquals(
+  a: object | undefined,
+  b: object | undefined,
+): boolean {
   if (a === b) {
     return true;
   }

electron/src/lib/preset/preset.ts

@@ -1,20 +1,16 @@
 import { machineIdentification } from "@/machines/types";
 import { z } from "zod";
 
-export type PresetSchema = z.ZodTypeAny;
+export type PresetSchema<T> = z.ZodType<T>;
 
-export const presetSchema = <S extends PresetSchema>(dataSchema: S) =>
+export const presetSchema = <T>(dataSchema: PresetSchema<T>) =>
   z.object({
     id: z.number().int().nonnegative().optional(),
     name: z.string().nonempty(),
     lastModified: z.coerce.date(),
     machineIdentification,
     schemaVersion: z.number().int().positive(),
-    data: dataSchema,
+    data: dataSchema.optional(),
   });
 
-export type Preset<S extends PresetSchema> = z.infer<
-  ReturnType<typeof presetSchema<S>>
->;
-
-export type PresetData<S extends PresetSchema> = z.infer<S>;
+export type Preset<T> = z.infer<ReturnType<typeof presetSchema<T>>>;

electron/src/lib/preset/presetStore.ts

@@ -1,6 +1,6 @@
 import { create } from "zustand";
 import { persist, PersistStorage, StorageValue } from "zustand/middleware";
-import { Preset, PresetSchema, presetSchema } from "./preset";
+import { Preset, presetSchema } from "./preset";
 import { MachineIdentification } from "@/machines/types";
 import { z } from "zod";
 import { toastError } from "@/components/Toast";
@@ -33,9 +33,9 @@ type PresetStoreData = {
 };
 
 export type PresetStore = PresetStoreData & {
-  insert: <T extends PresetSchema>(preset: Preset<T>) => PersistedPreset;
-  update: <T extends PresetSchema>(preset: Preset<T>) => void;
-  remove: <T extends PresetSchema>(preset: Preset<T>) => void;
+  insert: <T>(preset: Preset<T>) => PersistedPreset;
+  update: <T>(preset: Preset<T>) => void;
+  remove: <T>(preset: Preset<T>) => void;
   getById: (id: number) => PersistedPreset | undefined;
 
   setLatestPresetId: (
@@ -100,7 +100,7 @@ export const usePresetStore = create<PresetStore>()(
       presets: [],
       latestPresetIds: new Map(),
 
-      insert: <T extends PresetSchema>(preset: Preset<T>) => {
+      insert: <T>(preset: Preset<T>) => {
         const state = get();
         const { presets } = state;
         const ids = presets.map((p: PersistedPreset) => p.id);
@@ -115,7 +115,7 @@ export const usePresetStore = create<PresetStore>()(
         return persistedPreset;
       },
 
-      update: <T extends PresetSchema>(preset: Preset<T>) => {
+      update: <T>(preset: Preset<T>) => {
         const state = get();
         const presets: PersistedPreset[] = state.presets.map(
           (p: PersistedPreset) =>
@@ -124,7 +124,7 @@ export const usePresetStore = create<PresetStore>()(
         set({ ...state, presets });
       },
 
-      remove: <T extends PresetSchema>(preset: Preset<T>) => {
+      remove: <T>(preset: Preset<T>) => {
         const state = get();
         const presets = state.presets.filter(
           (p: Preset<any>) => p.id !== preset.id,

electron/src/lib/preset/usePresets.ts

@@ -3,13 +3,13 @@ import {
   machineIdentificationEquals,
 } from "@/machines/types";
 import { usePresetStore } from "./presetStore";
-import { Preset, PresetData, presetSchema, PresetSchema } from "./preset";
+import { Preset, presetSchema, PresetSchema } from "./preset";
 import { deepEquals } from "@/lib/objects";
 import { useEffect } from "react";
 import { toastError } from "@/components/Toast";
 import { z } from "zod";
 
-export type Presets<T extends PresetSchema> = {
+export type Presets<T> = {
   get: () => Preset<T>[];
   createFromCurrentState: (name: string) => Preset<T>;
   updateFromCurrentState: (preset: Preset<T>) => Preset<T>;
@@ -20,15 +20,15 @@ export type Presets<T extends PresetSchema> = {
   import: (json: any) => void;
 };
 
-export type UsePresetsParams<T extends PresetSchema> = {
+export type UsePresetsParams<T> = {
   machine_identification: MachineIdentification;
-  schemas: Map<number, T>;
+  schemas: Map<number, PresetSchema<T>>;
   schemaVersion: number;
-  currentState?: PresetData<T>;
-  defaultState?: PresetData<T>;
+  currentState?: T;
+  defaultState?: T;
 };
 
-export function usePresets<T extends PresetSchema>({
+export function usePresets<T>({
   machine_identification,
   schemas,
   schemaVersion,
@@ -49,7 +49,10 @@ export function usePresets<T extends PresetSchema>({
     }
 
     try {
-      const parsed = presetSchema(schema).parse(preset);
+      const parsed: Preset<T> = {
+        ...preset,
+        data: schema.parse(preset.data),
+      };
 
       if (parsed.schemaVersion < schemaVersion) {
         parsed.schemaVersion = schemaVersion;
@@ -93,7 +96,11 @@ export function usePresets<T extends PresetSchema>({
     return { ...preset, data: currentState };
   };
 
-  const updateFromCurrentState = (preset: Preset<T>) => {
+  const updateFromCurrentState = (preset: Preset<T>): Preset<T> => {
+    if (!currentState) {
+      return preset;
+    }
+
     const data = currentState;
 
     const newPreset = {
@@ -153,12 +160,16 @@ export function usePresets<T extends PresetSchema>({
   };
 
   const isActive = (preset: Preset<T>) => {
-    return deepEquals(currentState, preset.data);
+    if (!currentState) {
+      return false;
+    }
+
+    return deepEquals(currentState, preset.data ?? {});
   };
 
   const importPreset = (json: any) => {
     try {
-      const anyPreset = presetSchema(z.any()).parse(json);
+      const anyPreset = presetSchema(z.object()).parse(json);
 
       if (
         !machineIdentificationEquals(

electron/src/lib/types.ts

@@ -9,18 +9,18 @@ import { z } from "zod";
  */
 export function rustEnumSchema<T extends Record<string, z.ZodType>>(
   schemas: T,
-): z.ZodType<{ [K in keyof T]?: z.infer<T[K]> }> {
+) {
   // Create an object schema where all properties are optional
   const schemaEntries = Object.entries(schemas).map(([key, schema]) => [
     key,
     schema.optional(),
   ]);
 
-  const objectSchema = z.object(
-    Object.fromEntries(schemaEntries) as {
+  const objectSchema = z.object({
+    ...(schemaEntries as {
       [K in keyof T]: z.ZodOptional<T[K]>;
-    },
-  );
+    }),
+  });
 
   // Add refinement to ensure exactly one property is defined
   return objectSchema.refine(

electron/src/lib/validation.ts

@@ -1,19 +0,0 @@
-import { z } from "zod";
-
-// super refine function to validate if a string is a valid u16 number
-export function validateU16<T>(): (value: T, ctx: z.RefinementCtx) => boolean {
-  const refine = (value: T, ctx: z.RefinementCtx) => {
-    console.log("value", value);
-    if (typeof value === "string") {
-      const number = parseInt(value, 10);
-      if (number < 0 || number > 65535) {
-        ctx.addIssue({
-          code: z.ZodIssueCode.custom,
-          message: "Wert muss u16 integer sein",
-        });
-      }
-    }
-    return true;
-  };
-  return refine;
-}

electron/src/machines/extruder/extruder2/Extruder2Manual.tsx

@@ -1,15 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import extruderManualContent from "@root/docs/machines/manuals/extruder.md?raw";
+import extruderManualContent from "@/assets/markdown/extruder/manual.md?raw";
 
 export function ExtruderV2ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc
-        markdownContent={extruderManualContent}
-        isManual={true}
-      />
+      <MarkdownWithToc markdownContent={extruderManualContent} />
     </Page>
   );
 }

electron/src/machines/extruder/extruder2/Extruder2PresetsPage.tsx

@@ -7,7 +7,7 @@ import {
   PresetPreviewEntries,
   previewSeparator,
 } from "@/components/preset/PresetPreviewTable";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 
 const extruder1PresetDataSchema = z
   .object({
@@ -31,7 +31,7 @@ const extruder1PresetDataSchema = z
   })
   .partial();
 
-type Extruder2 = typeof extruder1PresetDataSchema;
+type Extruder2 = z.infer<typeof extruder1PresetDataSchema>;
 
 const schemas = new Map([[1, extruder1PresetDataSchema]]);
 
@@ -39,76 +39,69 @@ const previewEntries: PresetPreviewEntries<Extruder2> = [
   {
     name: "Target Front Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetFrontHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Middle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetMiddleHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Back Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetBackHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Nozzle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.targetNozzleHeatingTemperature?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Inverter Regulation",
-    renderValue: (data: PresetData<Extruder2>) => data.inverterRegulation,
+    renderValue: (data: Extruder2) => data.inverterRegulation,
   },
   {
     name: "Target Inverter RPM",
     unit: "rpm",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.targetInverterRpm?.toFixed(2),
+    renderValue: (data: Extruder2) => data.targetInverterRpm?.toFixed(2),
   },
   {
     name: "Target Inverter Pressure",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.targetInverterPressure?.toFixed(1),
+    renderValue: (data: Extruder2) => data.targetInverterPressure?.toFixed(1),
   },
   {
     name: "Inverter Direction",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.inverterRotationDirection,
+    renderValue: (data: Extruder2) => data.inverterRotationDirection,
   },
   previewSeparator,
   {
     name: "Pressure Limit",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pressureLimit?.toFixed(1),
+    renderValue: (data: Extruder2) => data.pressureLimit?.toFixed(1),
   },
   {
     name: "Enable Pressure Limit",
-    renderValue: (data: PresetData<Extruder2>) =>
+    renderValue: (data: Extruder2) =>
       data.pressureLimitEnabled ? "on" : "off",
   },
   previewSeparator,
   {
     name: "PID Pressue Kp",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pidPressureKp?.toFixed(4),
+    renderValue: (data: Extruder2) => data.pidPressureKp?.toFixed(4),
   },
   {
     name: "PID Pressue Ki",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pidPressureKi?.toFixed(4),
+    renderValue: (data: Extruder2) => data.pidPressureKi?.toFixed(4),
   },
   {
     name: "PID Pressue Kd",
-    renderValue: (data: PresetData<Extruder2>) =>
-      data.pidPressureKd?.toFixed(4),
+    renderValue: (data: Extruder2) => data.pidPressureKd?.toFixed(4),
   },
 ];
 
@@ -135,7 +128,7 @@ export function Extruder2PresetsPage() {
     setPressurePidKp,
   } = useExtruder2();
 
-  const toPresetData = (s?: typeof state): PresetData<Extruder2> => ({
+  const toPresetData = (s?: typeof state): Extruder2 => ({
     targetFrontHeatingTemperature: s?.heating_states.front.target_temperature,
     targetMiddleHeatingTemperature: s?.heating_states.middle.target_temperature,
     targetBackHeatingTemperature: s?.heating_states.back.target_temperature,
@@ -161,32 +154,32 @@ export function Extruder2PresetsPage() {
 
   const applyPreset = (preset: Preset<Extruder2>) => {
     setFrontHeatingTemperature(
-      preset.data.targetFrontHeatingTemperature ?? 150.0,
+      preset?.data?.targetFrontHeatingTemperature ?? 150.0,
     );
     setMiddleHeatingTemperature(
-      preset.data.targetMiddleHeatingTemperature ?? 150.0,
+      preset?.data?.targetMiddleHeatingTemperature ?? 150.0,
     );
     setBackHeatingTemperature(
-      preset.data.targetBackHeatingTemperature ?? 150.0,
+      preset?.data?.targetBackHeatingTemperature ?? 150.0,
     );
     setNozzleHeatingTemperature(
-      preset.data.targetNozzleHeatingTemperature ?? 150.0,
+      preset?.data?.targetNozzleHeatingTemperature ?? 150.0,
     );
 
-    setInverterTargetRpm(preset.data.targetInverterRpm ?? 0);
-    setInverterTargetPressure(preset.data.targetInverterPressure ?? 0);
-    setInverterRegulation(preset.data.inverterRegulation === "RPM");
+    setInverterTargetRpm(preset?.data?.targetInverterRpm ?? 0);
+    setInverterTargetPressure(preset?.data?.targetInverterPressure ?? 0);
+    setInverterRegulation(preset?.data?.inverterRegulation === "RPM");
 
     setInverterRotationDirection(
-      preset.data.inverterRotationDirection === "Forward",
+      preset?.data?.inverterRotationDirection === "Forward",
     );
 
-    setExtruderPressureLimit(preset.data.pressureLimit ?? 100.0);
-    setExtruderPressureLimitEnabled(preset.data.pressureLimitEnabled ?? true);
+    setExtruderPressureLimit(preset?.data?.pressureLimit ?? 100.0);
+    setExtruderPressureLimitEnabled(preset?.data?.pressureLimitEnabled ?? true);
 
-    setPressurePidKp(preset.data.pidPressureKp ?? 0.16);
-    setPressurePidKi(preset.data.pidPressureKi ?? 0.0);
-    setPressurePidKd(preset.data.pidPressureKd ?? 0.008);
+    setPressurePidKp(preset?.data?.pidPressureKp ?? 0.16);
+    setPressurePidKi(preset?.data?.pidPressureKi ?? 0.0);
+    setPressurePidKd(preset?.data?.pidPressureKd ?? 0.008);
   };
 
   return (

electron/src/machines/extruder/extruder3/Extruder3Manual.tsx

@@ -1,7 +1,7 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import extruderManualContent from "@root/docs/machines/manuals/extruder.md?raw";
+import extruderManualContent from "@/assets/markdown/extruder/manual.md?raw";
 
 export function ExtruderV3ManualPage() {
   return (

electron/src/machines/extruder/extruder3/Extruder3PresetsPage.tsx

@@ -7,7 +7,7 @@ import {
   PresetPreviewEntries,
   previewSeparator,
 } from "@/components/preset/PresetPreviewTable";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 
 const extruder3PresetDataSchema = z
   .object({
@@ -31,7 +31,7 @@ const extruder3PresetDataSchema = z
   })
   .partial();
 
-type Extruder3 = typeof extruder3PresetDataSchema;
+type Extruder3 = z.infer<typeof extruder3PresetDataSchema>;
 
 const schemas = new Map([[1, extruder3PresetDataSchema]]);
 
@@ -39,76 +39,69 @@ const previewEntries: PresetPreviewEntries<Extruder3> = [
   {
     name: "Target Front Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetFrontHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Middle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetMiddleHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Back Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetBackHeatingTemperature?.toFixed(1),
   },
   {
     name: "Target Nozzle Temperature",
     unit: "C",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.targetNozzleHeatingTemperature?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Inverter Regulation",
-    renderValue: (data: PresetData<Extruder3>) => data.inverterRegulation,
+    renderValue: (data: Extruder3) => data.inverterRegulation,
   },
   {
     name: "Target Inverter RPM",
     unit: "rpm",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.targetInverterRpm?.toFixed(2),
+    renderValue: (data: Extruder3) => data.targetInverterRpm?.toFixed(2),
   },
   {
     name: "Target Inverter Pressure",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.targetInverterPressure?.toFixed(1),
+    renderValue: (data: Extruder3) => data.targetInverterPressure?.toFixed(1),
   },
   {
     name: "Inverter Direction",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.inverterRotationDirection,
+    renderValue: (data: Extruder3) => data.inverterRotationDirection,
   },
   previewSeparator,
   {
     name: "Pressure Limit",
     unit: "bar",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pressureLimit?.toFixed(1),
+    renderValue: (data: Extruder3) => data.pressureLimit?.toFixed(1),
   },
   {
     name: "Enable Pressure Limit",
-    renderValue: (data: PresetData<Extruder3>) =>
+    renderValue: (data: Extruder3) =>
       data.pressureLimitEnabled ? "on" : "off",
   },
   previewSeparator,
   {
     name: "PID Pressue Kp",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pidPressureKp?.toFixed(4),
+    renderValue: (data: Extruder3) => data.pidPressureKp?.toFixed(4),
   },
   {
     name: "PID Pressue Ki",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pidPressureKi?.toFixed(4),
+    renderValue: (data: Extruder3) => data.pidPressureKi?.toFixed(4),
   },
   {
     name: "PID Pressue Kd",
-    renderValue: (data: PresetData<Extruder3>) =>
-      data.pidPressureKd?.toFixed(4),
+    renderValue: (data: Extruder3) => data.pidPressureKd?.toFixed(4),
   },
 ];
 
@@ -135,7 +128,7 @@ export function Extruder3PresetsPage() {
     setPressurePidKp,
   } = useExtruder3();
 
-  const toPresetData = (s?: typeof state): PresetData<Extruder3> => ({
+  const toPresetData = (s?: typeof state): Extruder3 => ({
     targetFrontHeatingTemperature: s?.heating_states.front.target_temperature,
     targetMiddleHeatingTemperature: s?.heating_states.middle.target_temperature,
     targetBackHeatingTemperature: s?.heating_states.back.target_temperature,
@@ -161,32 +154,32 @@ export function Extruder3PresetsPage() {
 
   const applyPreset = (preset: Preset<Extruder3>) => {
     setFrontHeatingTemperature(
-      preset.data.targetFrontHeatingTemperature ?? 150.0,
+      preset?.data?.targetFrontHeatingTemperature ?? 150.0,
     );
     setMiddleHeatingTemperature(
-      preset.data.targetMiddleHeatingTemperature ?? 150.0,
+      preset?.data?.targetMiddleHeatingTemperature ?? 150.0,
     );
     setBackHeatingTemperature(
-      preset.data.targetBackHeatingTemperature ?? 150.0,
+      preset?.data?.targetBackHeatingTemperature ?? 150.0,
     );
     setNozzleHeatingTemperature(
-      preset.data.targetNozzleHeatingTemperature ?? 150.0,
+      preset?.data?.targetNozzleHeatingTemperature ?? 150.0,
     );
 
-    setInverterTargetRpm(preset.data.targetInverterRpm ?? 0);
-    setInverterTargetPressure(preset.data.targetInverterPressure ?? 0);
-    setInverterRegulation(preset.data.inverterRegulation === "RPM");
+    setInverterTargetRpm(preset?.data?.targetInverterRpm ?? 0);
+    setInverterTargetPressure(preset?.data?.targetInverterPressure ?? 0);
+    setInverterRegulation(preset?.data?.inverterRegulation === "RPM");
 
     setInverterRotationDirection(
-      preset.data.inverterRotationDirection === "Forward",
+      preset?.data?.inverterRotationDirection === "Forward",
     );
 
-    setExtruderPressureLimit(preset.data.pressureLimit ?? 100.0);
-    setExtruderPressureLimitEnabled(preset.data.pressureLimitEnabled ?? true);
+    setExtruderPressureLimit(preset?.data?.pressureLimit ?? 100.0);
+    setExtruderPressureLimitEnabled(preset?.data?.pressureLimitEnabled ?? true);
 
-    setPressurePidKp(preset.data.pidPressureKp ?? 0.16);
-    setPressurePidKi(preset.data.pidPressureKi ?? 0.0);
-    setPressurePidKd(preset.data.pidPressureKd ?? 0.008);
+    setPressurePidKp(preset?.data?.pidPressureKp ?? 0.16);
+    setPressurePidKi(preset?.data?.pidPressureKi ?? 0.0);
+    setPressurePidKd(preset?.data?.pidPressureKd ?? 0.008);
   };
 
   return (

electron/src/machines/laser/laser1/Laser1Manual.tsx

@@ -1,12 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import laserManualContent from "@root/docs/machines/manuals/laser.md?raw";
+import laserManualContent from "@/assets/markdown/laser/manual.md?raw";
 
 export function Laser1ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc markdownContent={laserManualContent} isManual={true} />
+      <MarkdownWithToc markdownContent={laserManualContent} />
     </Page>
   );
 }

electron/src/machines/laser/laser1/Laser1PresetsPage.tsx

@@ -1,7 +1,7 @@
 import React from "react";
 import { z } from "zod";
 import { useLaser1 } from "./useLaser1";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import { laser1 } from "@/machines/properties";
 import { PresetPreviewEntries } from "@/components/preset/PresetPreviewTable";
 import { PresetsPage } from "@/components/preset/PresetsPage";
@@ -14,7 +14,7 @@ const laser1PresetDataSchema = z
   })
   .partial();
 
-type Laser1 = typeof laser1PresetDataSchema;
+type Laser1 = z.infer<typeof laser1PresetDataSchema>;
 
 const schemas = new Map([[1, laser1PresetDataSchema]]);
 
@@ -22,18 +22,17 @@ const previewEntries: PresetPreviewEntries<Laser1> = [
   {
     name: "Target Diameter",
     unit: "mm",
-    renderValue: (data: PresetData<Laser1>) => data?.targetDiameter?.toFixed(3),
+    renderValue: (data: Laser1) => data?.targetDiameter?.toFixed(3),
   },
   {
     name: "Lower Tolerance",
     unit: "mm",
-    renderValue: (data: PresetData<Laser1>) => data?.lowerTolerance?.toFixed(3),
+    renderValue: (data: Laser1) => data?.lowerTolerance?.toFixed(3),
   },
   {
     name: "Higher Tolerance",
     unit: "mm",
-    renderValue: (data: PresetData<Laser1>) =>
-      data?.higherTolerance?.toFixed(3),
+    renderValue: (data: Laser1) => data?.higherTolerance?.toFixed(3),
   },
 ];
 
@@ -47,16 +46,16 @@ export function Laser1PresetsPage() {
   } = useLaser1();
 
   const applyPreset = (preset: Preset<Laser1>) => {
-    const targetDiameter = preset.data.targetDiameter ?? 1.75;
-    const lowerTolerance = preset.data?.lowerTolerance ?? 0.05;
-    const higherTolerance = preset.data?.higherTolerance ?? 0.05;
+    const targetDiameter = preset?.data?.targetDiameter ?? 1.75;
+    const lowerTolerance = preset?.data?.lowerTolerance ?? 0.05;
+    const higherTolerance = preset?.data?.higherTolerance ?? 0.05;
 
     setTargetDiameter(targetDiameter);
     setLowerTolerance(lowerTolerance);
     setHigherTolerance(higherTolerance);
   };
 
-  const toPresetData = (s: typeof state): PresetData<Laser1> => ({
+  const toPresetData = (s: typeof state): Laser1 => ({
     targetDiameter: s?.laser_state.target_diameter,
     lowerTolerance: s?.laser_state.lower_tolerance,
     higherTolerance: s?.laser_state.higher_tolerance,

electron/src/machines/mock/mock1/Mock1Manual.tsx

@@ -1,12 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import mockManualContent from "@root/docs/machines/manuals/mock.md?raw";
+import winderManualContent from "@/assets/markdown/winder/manual.md?raw";
 
 export function Mock1ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc markdownContent={mockManualContent} isManual={true} />
+      <MarkdownWithToc markdownContent={winderManualContent} />
     </Page>
   );
 }

electron/src/machines/mock/mock1/Mock1PresetsPage.tsx

@@ -3,7 +3,7 @@ import { useMock1 } from "./useMock";
 import { mock1 } from "@/machines/properties";
 
 import { PresetsPage } from "@/components/preset/PresetsPage";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import { PresetPreviewEntries } from "@/components/preset/PresetPreviewTable";
 import { z } from "zod";
 
@@ -15,7 +15,7 @@ const mock1PresetDataSchema = z
   })
   .partial();
 
-type Mock1 = typeof mock1PresetDataSchema;
+type Mock1 = z.infer<typeof mock1PresetDataSchema>;
 
 const schemas = new Map([[1, mock1PresetDataSchema]]);
 
@@ -23,17 +23,17 @@ const previewEntries: PresetPreviewEntries<Mock1> = [
   {
     name: "Frequency 1",
     unit: "mHz",
-    renderValue: (data: PresetData<Mock1>) => data?.frequency1?.toFixed(3),
+    renderValue: (data: Mock1) => data?.frequency1?.toFixed(3),
   },
   {
     name: "Frequency 2",
     unit: "mHz",
-    renderValue: (data: PresetData<Mock1>) => data?.frequency2?.toFixed(3),
+    renderValue: (data: Mock1) => data?.frequency2?.toFixed(3),
   },
   {
     name: "Frequency 3",
     unit: "mHz",
-    renderValue: (data: PresetData<Mock1>) => data?.frequency3?.toFixed(3),
+    renderValue: (data: Mock1) => data?.frequency3?.toFixed(3),
   },
 ];
 
@@ -51,7 +51,7 @@ export function Mock1PresetsPage() {
     setFrequency3(frequency3);
   };
 
-  const toPresetData = (s: typeof state): PresetData<Mock1> => ({
+  const toPresetData = (s: typeof state): Mock1 => ({
     frequency1: s?.frequency1 ?? defaultState?.frequency1,
     frequency2: s?.frequency2 ?? defaultState?.frequency2,
     frequency3: s?.frequency3 ?? defaultState?.frequency3,

electron/src/machines/properties.ts

@@ -104,7 +104,7 @@ export const winder2: MachineProperties = {
 };
 
 export const extruder3: MachineProperties = {
-  name: "Extruder V3",
+  name: "Extruder",
   version: "V3",
   slug: "extruder3",
   icon: "qi:Extruder",
@@ -462,6 +462,17 @@ export const testmachine: MachineProperties = {
     },
   ],
 };
+export const wagoPower1: MachineProperties = {
+  name: "WAGO Power",
+  version: "V1",
+  slug: "wago_power1",
+  icon: "lu:PlugZap",
+  machine_identification: {
+    vendor: VENDOR_QITECH,
+    machine: 0x000a,
+  },
+  device_roles: [],
+};
 
 export const analogInputTestMachine: MachineProperties = {
   name: "AnalogTest",
@@ -529,6 +540,7 @@ export const machineProperties: MachineProperties[] = [
   laser1,
   mock1,
   buffer1,
+  wagoPower1,
   aquapath1,
   testmachine,
   analogInputTestMachine,

electron/src/machines/wago_power/wago_power1/WagoPower1ControlPage.tsx

@@ -0,0 +1,67 @@
+import { Page } from "@/components/Page";
+import React from "react";
+import { useWagoPower1 } from "./useWagoPower1";
+import { ControlGrid } from "@/control/ControlGrid";
+import { ControlCard } from "@/control/ControlCard";
+import { TimeSeriesValueNumeric } from "@/control/TimeSeriesValue";
+import { SelectionGroup } from "@/control/SelectionGroup";
+import { Mode } from "./wagoPower1Namespace";
+
+export function WagoPower1ControlPage() {
+  const {
+    state,
+
+    voltage,
+    current,
+
+    setMode,
+
+    isLoading,
+    isDisabled,
+  } = useWagoPower1();
+
+  return (
+    <Page>
+      <ControlGrid columns={2}>
+        <ControlCard title="Power">
+          <TimeSeriesValueNumeric
+            label="Voltage"
+            unit="V"
+            timeseries={voltage}
+            renderValue={(value) => value.toFixed(2)}
+          />
+          <TimeSeriesValueNumeric
+            label="Current"
+            unit="mA"
+            timeseries={current}
+            renderValue={(value) => value.toFixed(2)}
+          />
+        </ControlCard>
+        <ControlCard title="Mode">
+          <SelectionGroup<Mode>
+            value={state?.mode}
+            disabled={isDisabled}
+            loading={isLoading}
+            onChange={setMode}
+            orientation="vertical"
+            className="grid h-full grid-cols-2 gap-2"
+            options={{
+              Off: {
+                children: "Off",
+                icon: "lu:PowerOff",
+                isActiveClassName: "bg-gray-600",
+                className: "h-full",
+              },
+              On24V: {
+                children: "On",
+                icon: "lu:Power",
+                isActiveClassName: "bg-green-600",
+                className: "h-full",
+              },
+            }}
+          />
+        </ControlCard>
+      </ControlGrid>
+    </Page>
+  );
+}

electron/src/machines/wago_power/wago_power1/WagoPower1Page.tsx

@@ -0,0 +1,20 @@
+import { Topbar } from "@/components/Topbar";
+import { wagoPower1SerialRoute } from "@/routes/routes";
+import React from "react";
+
+export function WagoPower1Page() {
+  const { serial } = wagoPower1SerialRoute.useParams();
+  return (
+    <Topbar
+      pathname={`/_sidebar/machines/wago_power1/${serial}`}
+      items={[
+        {
+          link: "control",
+          activeLink: "control",
+          title: "Control",
+          icon: "lu:PlugZap",
+        },
+      ]}
+    />
+  );
+}

electron/src/machines/wago_power/wago_power1/useWagoPower1.ts

@@ -0,0 +1,104 @@
+import { toastError } from "@/components/Toast";
+import { wagoPower1 } from "@/machines/properties";
+import { MachineIdentificationUnique } from "@/machines/types";
+import { wagoPower1SerialRoute } from "@/routes/routes";
+import { useEffect, useMemo } from "react";
+import {
+  Mode,
+  modeSchema,
+  StateEvent,
+  useWagoPower1Namespace,
+} from "./wagoPower1Namespace";
+import { useStateOptimistic } from "@/lib/useStateOptimistic";
+import { produce } from "immer";
+import z from "zod";
+import { useMachineMutate } from "@/client/useClient";
+
+export function useWagoPower1() {
+  const { serial: serialString } = wagoPower1SerialRoute.useParams();
+
+  // Memoize the machine identification to keep it stable between renders
+  const machineIdentification: MachineIdentificationUnique = useMemo(() => {
+    const serial = parseInt(serialString);
+
+    if (isNaN(serial)) {
+      toastError(
+        "Invalid Serial Number",
+        `"${serialString}" is not a valid serial number.`,
+      );
+
+      return {
+        machine_identification: {
+          vendor: 0,
+          machine: 0,
+        },
+        serial: 0,
+      };
+    }
+
+    return {
+      machine_identification: wagoPower1.machine_identification,
+      serial,
+    };
+  }, [serialString]);
+
+  const { request: requestModeSet } = useMachineMutate(
+    z.object({ SetMode: modeSchema }),
+  );
+
+  const { state, defaultState, voltage, current } = useWagoPower1Namespace(
+    machineIdentification,
+  );
+  //
+  // Single optimistic state for all state management
+  const stateOptimistic = useStateOptimistic<StateEvent>();
+
+  // Update optimistic state when real state changes
+  useEffect(() => {
+    if (state) {
+      stateOptimistic.setReal(state);
+    }
+  }, [state]);
+
+  // Helper function for optimistic updates using produce
+  const updateStateOptimistically = (
+    producer: (current: StateEvent) => void,
+    serverRequest: () => void,
+  ) => {
+    const currentState = stateOptimistic.value;
+    if (currentState && !stateOptimistic.isOptimistic) {
+      stateOptimistic.setOptimistic(produce(currentState, producer));
+    }
+    serverRequest();
+  };
+
+  const setMode = (mode: Mode) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.mode = mode;
+      },
+      () =>
+        requestModeSet({
+          machine_identification_unique: machineIdentification,
+          data: { SetMode: mode },
+        }),
+    );
+  };
+
+  // Calculate loading states
+  const isLoading = stateOptimistic.isOptimistic;
+  const isDisabled = !stateOptimistic.isInitialized;
+
+  return {
+    state: stateOptimistic.value?.data,
+    defaultState: defaultState?.data,
+
+    current,
+    voltage,
+
+    setMode,
+
+    isLoading,
+    isDisabled,
+  };
+}

electron/src/machines/wago_power/wago_power1/wagoPower1Namespace.ts

@@ -0,0 +1,135 @@
+import { StoreApi } from "zustand";
+import { create } from "zustand";
+import { z } from "zod";
+import {
+  EventHandler,
+  eventSchema,
+  Event,
+  handleUnhandledEventError,
+  NamespaceId,
+  createNamespaceHookImplementation,
+  ThrottledStoreUpdater,
+} from "../../../client/socketioStore";
+import { MachineIdentificationUnique } from "@/machines/types";
+import { useMemo } from "react";
+import {
+  createTimeSeries,
+  TimeSeries,
+  TimeSeriesValue,
+} from "@/lib/timeseries";
+
+export const liveValuesEventSchema = eventSchema(
+  z.object({
+    voltage: z.number(),
+    current: z.number(),
+  }),
+);
+
+export type LiveValuesEvent = z.infer<typeof liveValuesEventSchema>;
+
+export const modeSchema = z.enum(["Off", "On24V"]);
+export type Mode = z.infer<typeof modeSchema>;
+
+export const stateEventSchema = eventSchema(
+  z.object({
+    mode: modeSchema,
+    is_default_state: z.boolean(),
+  }),
+);
+
+export type StateEvent = z.infer<typeof stateEventSchema>;
+
+export type WagoPower1NamespaceStore = {
+  state: StateEvent | null;
+  defaultState: StateEvent | null;
+
+  current: TimeSeries;
+  voltage: TimeSeries;
+};
+
+const { initialTimeSeries: voltage, insert: addVoltage } = createTimeSeries();
+const { initialTimeSeries: current, insert: addCurrent } = createTimeSeries();
+
+const createWagoPower1NamespaceStore = (): StoreApi<WagoPower1NamespaceStore> =>
+  create<WagoPower1NamespaceStore>(() => {
+    return {
+      state: null,
+      defaultState: null,
+      voltage,
+      current,
+    };
+  });
+
+function wagoPower1MessageHandler(
+  store: StoreApi<WagoPower1NamespaceStore>,
+  throttledUpdater: ThrottledStoreUpdater<WagoPower1NamespaceStore>,
+): EventHandler {
+  return (event: Event<any>) => {
+    const eventName = event.name;
+
+    // Helper function to update store through buffer
+    const updateStore = (
+      updater: (state: WagoPower1NamespaceStore) => WagoPower1NamespaceStore,
+    ) => {
+      throttledUpdater.updateWith(updater);
+    };
+
+    try {
+      if (eventName === "StateEvent") {
+        const stateEvent = stateEventSchema.parse(event);
+
+        updateStore((state) => ({
+          ...state,
+          state: stateEvent,
+          // only set default state if is_default_state is true
+          defaultState: stateEvent.data.is_default_state
+            ? stateEvent
+            : state.defaultState,
+        }));
+      } else if (eventName === "LiveValuesEvent") {
+        console.log(event);
+        const liveValues = liveValuesEventSchema.parse(event);
+        const { voltage, current } = liveValues.data;
+        const voltageValue: TimeSeriesValue = {
+          value: voltage,
+          timestamp: liveValues.ts,
+        };
+        const currentValue: TimeSeriesValue = {
+          value: current,
+          timestamp: liveValues.ts,
+        };
+        updateStore((store: WagoPower1NamespaceStore) => ({
+          ...store,
+          voltage: addVoltage(store.voltage, voltageValue),
+          current: addCurrent(store.current, currentValue),
+        }));
+      } else {
+        handleUnhandledEventError(eventName);
+      }
+    } catch (e) {
+      console.error(e);
+    }
+  };
+}
+
+const useWagoPower1NamespaceImplementation =
+  createNamespaceHookImplementation<WagoPower1NamespaceStore>({
+    createStore: createWagoPower1NamespaceStore,
+    createEventHandler: wagoPower1MessageHandler,
+  });
+
+export function useWagoPower1Namespace(
+  machine_identification_unique: MachineIdentificationUnique,
+): WagoPower1NamespaceStore {
+  // Generate namespace ID from validated machine ID
+  const namespaceId = useMemo<NamespaceId>(
+    () => ({
+      type: "machine",
+      machine_identification_unique,
+    }),
+    [machine_identification_unique],
+  );
+
+  // Use the implementation with validated namespace ID
+  return useWagoPower1NamespaceImplementation(namespaceId);
+}

electron/src/machines/winder/winder2/Winder2Manual.tsx

@@ -1,12 +1,12 @@
 import { Page } from "@/components/Page";
 import { MarkdownWithToc } from "@/components/MarkdownWithToc";
 import React from "react";
-import winderManualContent from "@root/docs/machines/manuals/winder.md?raw";
+import winderManualContent from "@/assets/markdown/winder/manual.md?raw";
 
 export function Winder2ManualPage() {
   return (
     <Page>
-      <MarkdownWithToc markdownContent={winderManualContent} isManual={true} />
+      <MarkdownWithToc markdownContent={winderManualContent} />
     </Page>
   );
 }

electron/src/machines/winder/winder2/Winder2PresetsPage.tsx

@@ -3,7 +3,7 @@ import { useWinder2 } from "./useWinder";
 import { winder2 } from "@/machines/properties";
 
 import { PresetsPage } from "@/components/preset/PresetsPage";
-import { Preset, PresetData } from "@/lib/preset/preset";
+import { Preset } from "@/lib/preset/preset";
 import {
   pullerStateSchema,
   spoolSpeedControllerStateSchema,
@@ -16,19 +16,21 @@ import {
 
 const winder2PresetDataSchema = z
   .object({
-    traverse_state: z.object({
-      limit_inner: z.number(),
-      limit_outer: z.number(),
-      step_size: z.number(),
-      padding: z.number(),
-      laserpointer: z.boolean(),
-    }),
-    puller_state: pullerStateSchema,
-    spool_speed_controller_state: spoolSpeedControllerStateSchema,
+    traverse_state: z
+      .object({
+        limit_inner: z.number(),
+        limit_outer: z.number(),
+        step_size: z.number(),
+        padding: z.number(),
+        laserpointer: z.boolean(),
+      })
+      .partial(),
+    puller_state: pullerStateSchema.partial(),
+    spool_speed_controller_state: spoolSpeedControllerStateSchema.partial(),
   })
-  .deepPartial();
+  .partial();
 
-type Winder2 = typeof winder2PresetDataSchema;
+type Winder2 = z.infer<typeof winder2PresetDataSchema>;
 
 const schemas = new Map([[1, winder2PresetDataSchema]]);
 
@@ -36,40 +38,39 @@ const previewEntries: PresetPreviewEntries<Winder2> = [
   {
     name: "Inner Traverse Limit",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
-      data?.traverse_state?.limit_inner?.toFixed(1) ?? "N/A",
+    renderValue: (data: Winder2) =>
+      data.traverse_state?.limit_inner?.toFixed(1) ?? "N/A",
   },
   {
     name: "Outer Traverse Limit",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data?.traverse_state?.limit_outer?.toFixed(1) ?? "N/A",
   },
   {
     name: "Traverse Step Size",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data?.traverse_state?.step_size?.toFixed(1) ?? "N/A",
   },
   {
     name: "Traverse Padding",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
-      data?.traverse_state?.padding?.toFixed(1),
+    renderValue: (data: Winder2) => data?.traverse_state?.padding?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Puller Regulation",
-    renderValue: (data: PresetData<Winder2>) => data?.puller_state?.regulation,
+    renderValue: (data: Winder2) => data?.puller_state?.regulation,
   },
   {
     name: "Puller Direction",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.puller_state?.forward ? "Forward" : "Backward",
   },
   {
     name: "Puller Gear Ratio",
-    renderValue: (data: PresetData<Winder2>) => {
+    renderValue: (data: Winder2) => {
       const ratio = data.puller_state?.gear_ratio;
       if (ratio === "OneToOne") return "1:1";
       if (ratio === "OneToFive") return "1:5";
@@ -80,74 +81,73 @@ const previewEntries: PresetPreviewEntries<Winder2> = [
   {
     name: "Puller Target Speed",
     unit: "m/min",
-    renderValue: (data: PresetData<Winder2>) =>
-      data.puller_state?.target_speed?.toFixed(2),
+    renderValue: (data: Winder2) => data.puller_state?.target_speed?.toFixed(2),
   },
   {
     name: "Puller Target Diameter",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.puller_state?.target_diameter?.toFixed(1),
   },
   {
     name: "Puller Target Diameter",
     unit: "mm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.puller_state?.target_diameter?.toFixed(1),
   },
   previewSeparator,
   {
     name: "Spool Regulation",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.regulation_mode,
   },
   {
     name: "Spool Direction",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.forward ? "Forward" : "Reverse",
   },
   {
     name: "Spool Min Speed",
     unit: "rpm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.minmax_min_speed?.toFixed(2),
   },
   {
     name: "Spool Max Speed",
     unit: "rpm",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.minmax_max_speed?.toFixed(2),
   },
   previewSeparator,
   {
     name: "Adaptive Spool Tension Target",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_tension_target?.toFixed(2),
   },
   {
     name: "Adaptive Spool Learning Rate",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_radius_learning_rate?.toFixed(
         2,
       ),
   },
   {
     name: "Adaptive Spool Max Speed Multiplier",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_max_speed_multiplier?.toFixed(
         1,
       ),
   },
   {
     name: "Adaptive Spool Acceleration Factor",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_acceleration_factor?.toFixed(
         2,
       ),
   },
   {
     name: "Adaptive Spool Deaccel. Urgency",
-    renderValue: (data: PresetData<Winder2>) =>
+    renderValue: (data: Winder2) =>
       data.spool_speed_controller_state?.adaptive_deacceleration_urgency_multiplier?.toFixed(
         1,
       ),
@@ -230,11 +230,11 @@ export function Winder2PresetsPage() {
     // );
 
     enableTraverseLaserpointer(
-      preset.data.traverse_state?.laserpointer ?? false,
+      preset.data?.traverse_state?.laserpointer ?? false,
     );
   };
 
-  const toPresetData = (s: typeof state): PresetData<Winder2> => ({
+  const toPresetData = (s: typeof state): Winder2 => ({
     traverse_state: {
       limit_inner: s?.traverse_state?.limit_inner,
       limit_outer: s?.traverse_state?.limit_outer,

electron/src/machines/winder/winder2/winder2Namespace.ts

@@ -1,8 +1,3 @@
-/**
- * @file winder2Namespace.ts
- * @description TypeScript implementation of Winder2 namespace with Zod schema validation.
- */
-
 import { StoreApi } from "zustand";
 import { create } from "zustand";
 import { z } from "zod";

electron/src/main.ts

@@ -1,13 +1,14 @@
 import { app, BrowserWindow } from "electron";
 import registerListeners from "./helpers/ipc/listeners-register";
-// "electron-squirrel-startup" seems broken when packaging with vite
-//import started from "electron-squirrel-startup";
 import path from "path";
 import {
   installExtension,
   REACT_DEVELOPER_TOOLS,
 } from "electron-devtools-installer";
 
+const ARG1 = process.argv[1] ?? "./main.js";
+const DIR = path.dirname(ARG1);
+
 // Set consistent app ID for Windows taskbar and GNOME dock integration
 app.setAppUserModelId("de.qitech.control-electron");
 
@@ -29,7 +30,9 @@ if (!gotTheLock) {
 }
 
 function createWindow() {
-  const preload = path.join(__dirname, "preload.js");
+  const preload = path.join(DIR, "preload.js");
+  console.log("Setting preload.js to", preload);
+
   const mainWindow = new BrowserWindow({
     width: 1200,
     height: 800,
@@ -43,7 +46,7 @@ function createWindow() {
       preload: preload,
     },
     // Add icon path for better integration
-    icon: path.join(__dirname, "../assets/icon.png"),
+    icon: path.join(DIR, "icon.png"),
     // Set window class explicitly for Linux/GNOME integration
     title: "QiTech Control",
   });
@@ -53,12 +56,11 @@ function createWindow() {
 
   registerListeners(mainWindow);
 
-  if (MAIN_WINDOW_VITE_DEV_SERVER_URL) {
-    mainWindow.loadURL(MAIN_WINDOW_VITE_DEV_SERVER_URL);
+  if (process.env.VITE_DEV_SERVER_URL) {
+    mainWindow.loadURL(process.env.VITE_DEV_SERVER_URL);
   } else {
-    mainWindow.loadFile(
-      path.join(__dirname, `../renderer/${MAIN_WINDOW_VITE_NAME}/index.html`),
-    );
+    const index = path.join(DIR, "index.html");
+    mainWindow.loadFile(index);
   }
 }
 

electron/src/metrics/MetricsControlPage.tsx

@@ -108,10 +108,10 @@ export function MetricsControlPage() {
 
           {/* Total page faults (composite, no single unit) */}
           <MetricCard
-            title="Total Page Faults"
+            title="Page Faults"
             value={
               minorFaults != null || majorFaults != null
-                ? `${minorFaults ?? "–"} minor | ${majorFaults ?? "–"} major`
+                ? `${minorFaults ?? "–"} minor per second | ${majorFaults ?? "–"} major`
                 : "—"
             }
           />

electron/src/preload.ts

@@ -1,3 +1,4 @@
 import exposeContexts from "./helpers/ipc/context-exposer";
 
+console.log("preload.js loaded");
 exposeContexts();

electron/src/routes/routes.tsx

@@ -4,7 +4,6 @@ import React from "react";
 import { z } from "zod";
 
 import { ChooseVersionPage } from "@/setup/ChooseVersionPage";
-import { fallback, zodValidator } from "@tanstack/zod-adapter";
 import { githubSourceSchema } from "@/setup/GithubSourceDialog";
 import { SidebarLayout } from "@/components/SidebarLayout";
 import { SetupPage } from "@/setup/SetupPage";
@@ -42,6 +41,7 @@ import { Buffer1SettingsPage } from "@/machines/buffer/buffer1/Buffer1Settings";
 import { Laser1ControlPage } from "@/machines/laser/laser1/Laser1ControlPage";
 import { Laser1GraphsPage } from "@/machines/laser/laser1/Laser1Graph";
 import { Laser1Page } from "@/machines/laser/laser1/Laser1Page";
+import { Laser1PresetsPage } from "@/machines/laser/laser1/Laser1PresetsPage";
 
 import { Mock1ControlPage } from "@/machines/mock/mock1/Mock1ControlPage";
 import { Mock1GraphPage } from "@/machines/mock/mock1/Mock1Graph";
@@ -55,7 +55,7 @@ import { Aquapath1GraphPage } from "@/machines/aquapath/aquapath1/Aquapath1Graph
 
 import { TestMachinePage } from "@/machines/testmachine/TestMachinePage";
 import { TestMachineControlPage } from "@/machines/testmachine/TestMachineControlPage";
-import { Laser1PresetsPage } from "@/machines/laser/laser1/Laser1PresetsPage";
+
 import { AnalogInputTestMachine } from "@/machines/analoginputtestmachine/AnalogInputTestMachinePage";
 import { AnalogInputTestMachineControl } from "@/machines/analoginputtestmachine/AnalogInputTestMachineControlPage";
 import { IP20TestMachinePage } from "@/machines/ip20testmachine/IP20TestMachinePage";
@@ -64,6 +64,9 @@ import { IP20TestMachineControlPage } from "@/machines/ip20testmachine/IP20TestM
 import { MetricsGraphsPage } from "@/metrics/MetricsGraphsPage";
 import { MetricsControlPage } from "@/metrics/MetricsControlPage";
 
+import { WagoPower1Page } from "@/machines/wago_power/wago_power1/WagoPower1Page";
+import { WagoPower1ControlPage } from "@/machines/wago_power/wago_power1/WagoPower1ControlPage";
+
 // make a route tree like this
 // _mainNavigation/machines/winder2/$serial/control
 // _mainNavigation/configuration/a
@@ -317,6 +320,18 @@ export const buffer1SettingsRoute = createRoute({
   component: () => <Buffer1SettingsPage />,
 });
 
+export const wagoPower1SerialRoute = createRoute({
+  getParentRoute: () => machinesRoute,
+  path: "wago_power1/$serial",
+  component: () => <WagoPower1Page />,
+});
+
+export const wagoPower1ControlRoute = createRoute({
+  getParentRoute: () => wagoPower1SerialRoute,
+  path: "control",
+  component: () => <WagoPower1ControlPage />,
+});
+
 export const setupRoute = createRoute({
   getParentRoute: () => sidebarRoute,
   path: "setup",
@@ -365,9 +380,9 @@ export const metricsRoute = createRoute({
 
 export const versionSearchSchema = z
   .object({
-    branch: fallback(z.string().optional(), undefined),
-    commit: fallback(z.string().optional(), undefined),
-    tag: fallback(z.string().optional(), undefined),
+    branch: z.string().optional(),
+    commit: z.string().optional(),
+    tag: z.string().optional(),
   })
   .merge(githubSourceSchema)
   .refine(
@@ -389,14 +404,14 @@ export const updateChangelogRoute = createRoute({
   getParentRoute: () => updateRoute,
   path: "changelog",
   component: () => <ChangelogPage />,
-  validateSearch: zodValidator(versionSearchSchema),
+  validateSearch: versionSearchSchema,
 });
 
 export const updateExecuteRoute = createRoute({
   getParentRoute: () => updateRoute,
   path: "execute",
   component: () => <UpdateExecutePage />,
-  validateSearch: zodValidator(versionSearchSchema),
+  validateSearch: versionSearchSchema,
 });
 
 export const rootTree = RootRoute.addChildren([
@@ -462,6 +477,8 @@ export const rootTree = RootRoute.addChildren([
         mock1PresetsRoute,
       ]),
 
+      wagoPower1SerialRoute.addChildren([wagoPower1ControlRoute]),
+
       buffer1SerialRoute.addChildren([buffer1ControlRoute]),
     ]),
   ]),

electron/src/setup/DeviceEepromDialog.tsx

@@ -37,7 +37,6 @@ import {
   SelectValue,
 } from "@/components/ui/select";
 import { useFormValues } from "@/lib/useFormValues";
-import { validateU16 } from "@/lib/validation";
 import { DeviceRoleComponent } from "@/components/DeviceRole";
 import { Alert } from "@/components/Alert";
 import { Separator } from "@/components/ui/separator";
@@ -54,9 +53,15 @@ type Props = {
 };
 
 const formSchema = z.object({
-  machine: z.string().superRefine(validateU16),
-  serial: z.string().superRefine(validateU16),
-  role: z.string().superRefine(validateU16),
+  machine: z
+    .string()
+    .refine((v) => parseInt(v) < 0xffff, { error: "Value too big" }),
+  serial: z
+    .string()
+    .refine((v) => parseInt(v) < 0xffff, { error: "Value too big" }),
+  role: z
+    .string()
+    .refine((v) => parseInt(v) < 0xffff, { error: "Value too big" }),
 });
 
 type FormSchema = z.infer<typeof formSchema>;

electron/src/setup/GithubSourceDialog.tsx

@@ -24,7 +24,6 @@ import { Input } from "@/components/ui/input";
 import { Separator } from "@/components/ui/separator";
 import { Icon } from "@/components/Icon";
 import { TouchButton } from "@/components/touch/TouchButton";
-import { fallback } from "@tanstack/zod-adapter";
 
 type Props = {
   value: GithubSource;
@@ -32,9 +31,9 @@ type Props = {
 };
 
 export const githubSourceSchema = z.object({
-  githubRepoOwner: fallback(z.string(), "qitechgmbh"),
-  githubRepoName: fallback(z.string(), "control"),
-  githubToken: fallback(z.string().optional().nullable(), undefined),
+  githubRepoOwner: z.string().catch("qitechgmbh"),
+  githubRepoName: z.string().catch("control"),
+  githubToken: z.string().optional(),
 });
 
 export type GithubSource = z.infer<typeof githubSourceSchema>;
@@ -91,7 +90,7 @@ export function GithubSourceDialogContent({
   const onSubmit = (values: GithubSource) => {
     onChange({
       ...values,
-      githubToken: values.githubToken === "" ? null : values.githubToken,
+      githubToken: values.githubToken === "" ? undefined : values.githubToken,
     });
     setOpen(false);
   };

electron/tsconfig.json

@@ -16,8 +16,7 @@
     "strict": true,
     "baseUrl": ".",
     "paths": {
-      "@/*": ["./src/*"],
-      "@root/*": ["../*"]
+      "@/*": ["./src/*"]
     },
     "outDir": "dist",
     "moduleResolution": "node",

electron/vite.base.config.ts

@@ -1,110 +0,0 @@
-import { builtinModules } from "node:module";
-import type { AddressInfo } from "node:net";
-import type { ConfigEnv, Plugin, UserConfig } from "vite";
-import pkg from "./package.json";
-
-export const builtins = [
-  "electron",
-  ...builtinModules.map((m) => [m, `node:${m}`]).flat(),
-];
-
-export const external = [
-  ...builtins,
-  ...Object.keys(
-    "dependencies" in pkg ? (pkg.dependencies as Record<string, unknown>) : {},
-  ),
-];
-
-export function getBuildConfig(env: ConfigEnv<"build">): UserConfig {
-  const { root, mode, command } = env;
-
-  return {
-    root,
-    mode,
-    build: {
-      // Prevent multiple builds from interfering with each other.
-      emptyOutDir: false,
-      // 🚧 Multiple builds may conflict.
-      outDir: ".vite/build",
-      watch: command === "serve" ? {} : null,
-      minify: command === "build",
-    },
-    clearScreen: false,
-  };
-}
-
-export function getDefineKeys(names: string[]) {
-  const define: { [name: string]: VitePluginRuntimeKeys } = {};
-
-  return names.reduce((acc, name) => {
-    const NAME = name.toUpperCase();
-    const keys: VitePluginRuntimeKeys = {
-      VITE_DEV_SERVER_URL: `${NAME}_VITE_DEV_SERVER_URL`,
-      VITE_NAME: `${NAME}_VITE_NAME`,
-    };
-
-    return { ...acc, [name]: keys };
-  }, define);
-}
-
-export function getBuildDefine(env: ConfigEnv<"build">) {
-  const { command, forgeConfig } = env;
-  const names = forgeConfig.renderer
-    .filter(({ name }) => name != null)
-    .map(({ name }) => name!);
-  const defineKeys = getDefineKeys(names);
-  const define = Object.entries(defineKeys).reduce(
-    (acc, [name, keys]) => {
-      const { VITE_DEV_SERVER_URL, VITE_NAME } = keys;
-      const def = {
-        [VITE_DEV_SERVER_URL]:
-          command === "serve"
-            ? JSON.stringify(process.env[VITE_DEV_SERVER_URL])
-            : undefined,
-        [VITE_NAME]: JSON.stringify(name),
-      };
-      return { ...acc, ...def };
-    },
-    {} as Record<string, any>,
-  );
-
-  return define;
-}
-
-export function pluginExposeRenderer(name: string): Plugin {
-  const { VITE_DEV_SERVER_URL } = getDefineKeys([name])[name];
-
-  return {
-    name: "@electron-forge/plugin-vite:expose-renderer",
-    configureServer(server) {
-      process.viteDevServers ??= {};
-      // Expose server for preload scripts hot reload.
-      process.viteDevServers[name] = server;
-
-      server.httpServer?.once("listening", () => {
-        const addressInfo = server.httpServer!.address() as AddressInfo;
-        // Expose env constant for main process use.
-        process.env[VITE_DEV_SERVER_URL] =
-          `http://localhost:${addressInfo?.port}`;
-      });
-    },
-  };
-}
-
-export function pluginHotRestart(command: "reload" | "restart"): Plugin {
-  return {
-    name: "@electron-forge/plugin-vite:hot-restart",
-    closeBundle() {
-      if (command === "reload") {
-        for (const server of Object.values(process.viteDevServers)) {
-          // Preload scripts hot reload.
-          server.ws.send({ type: "full-reload" });
-        }
-      } else {
-        // Main process hot restart.
-        // https://github.com/electron/forge/blob/v7.2.0/packages/api/core/src/api/start.ts#L216-L223
-        process.stdin.emit("data", "rs");
-      }
-    },
-  };
-}

electron/vite.config.ts

@@ -0,0 +1,37 @@
+import react from "@vitejs/plugin-react";
+import electron from "vite-plugin-electron/simple";
+import path from "path";
+
+// https://vitejs.dev/config
+export default {
+  publicDir: path.resolve(__dirname, "public"),
+  resolve: {
+    preserveSymlinks: true,
+    alias: {
+      "@": path.resolve(__dirname, "./src"),
+      "@root": path.resolve(__dirname, ".."),
+    },
+  },
+  clearScreen: false,
+  plugins: [
+    electron({
+      main: {
+        entry: "src/main.ts",
+        onstart: ({ startup }) => {
+          startup(["./dist-electron/main.js"]);
+        },
+      },
+      preload: {
+        // Shortcut of `build.rollupOptions.input`
+        input: "src/preload.ts",
+      },
+      // Optional: Use Node.js API in the Renderer process
+      renderer: {},
+    }),
+    react({
+      babel: {
+        plugins: [["babel-plugin-react-compiler"]],
+      },
+    }),
+  ],
+};

electron/vite.main.config.ts

@@ -1,35 +0,0 @@
-import type { ConfigEnv, UserConfig } from "vite";
-import { defineConfig, mergeConfig } from "vite";
-import {
-  getBuildConfig,
-  getBuildDefine,
-  external,
-  pluginHotRestart,
-} from "./vite.base.config";
-
-// https://vitejs.dev/config
-export default defineConfig((env) => {
-  const forgeEnv = env as ConfigEnv<"build">;
-  const { forgeConfigSelf } = forgeEnv;
-  const define = getBuildDefine(forgeEnv);
-  const config: UserConfig = {
-    build: {
-      lib: {
-        entry: forgeConfigSelf.entry!,
-        fileName: () => "[name].js",
-        formats: ["cjs"],
-      },
-      rollupOptions: {
-        external,
-      },
-    },
-    plugins: [pluginHotRestart("restart")],
-    define,
-    resolve: {
-      // Load the Node.js entry.
-      mainFields: ["module", "jsnext:main", "jsnext"],
-    },
-  };
-
-  return mergeConfig(getBuildConfig(forgeEnv), config);
-});

electron/vite.preload.config.ts

@@ -1,29 +0,0 @@
-import type { ConfigEnv, UserConfig } from "vite";
-import { defineConfig, mergeConfig } from "vite";
-import { getBuildConfig, external, pluginHotRestart } from "./vite.base.config";
-
-// https://vitejs.dev/config
-export default defineConfig((env) => {
-  const forgeEnv = env as ConfigEnv<"build">;
-  const { forgeConfigSelf } = forgeEnv;
-  const config: UserConfig = {
-    build: {
-      rollupOptions: {
-        external,
-        // Preload scripts may contain Web assets, so use the `build.rollupOptions.input` instead `build.lib.entry`.
-        input: forgeConfigSelf.entry!,
-        output: {
-          format: "cjs",
-          // It should not be split chunks.
-          inlineDynamicImports: true,
-          entryFileNames: "[name].js",
-          chunkFileNames: "[name].js",
-          assetFileNames: "[name].[ext]",
-        },
-      },
-    },
-    plugins: [pluginHotRestart("reload")],
-  };
-
-  return mergeConfig(getBuildConfig(forgeEnv), config);
-});

electron/vite.renderer.config.ts

@@ -1,38 +0,0 @@
-import path from "path";
-import react from "@vitejs/plugin-react";
-import type { ConfigEnv, UserConfig } from "vite";
-import { defineConfig } from "vite";
-import { pluginExposeRenderer } from "./vite.base.config";
-
-// https://vitejs.dev/config
-export default defineConfig((env) => {
-  const forgeEnv = env as ConfigEnv<"renderer">;
-  const { root, mode, forgeConfigSelf } = forgeEnv;
-  const name = forgeConfigSelf.name ?? "";
-
-  return {
-    root,
-    mode,
-    base: "./",
-    publicDir: path.resolve(__dirname, "public"),
-    build: {
-      outDir: `.vite/renderer/${name}`,
-    },
-    plugins: [
-      pluginExposeRenderer(name),
-      react({
-        babel: {
-          plugins: [["babel-plugin-react-compiler"]],
-        },
-      }),
-    ],
-    resolve: {
-      preserveSymlinks: true,
-      alias: {
-        "@": path.resolve(__dirname, "./src"),
-        "@root": path.resolve(__dirname, ".."),
-      },
-    },
-    clearScreen: false,
-  } as UserConfig;
-});

ethercat-hal/Cargo.toml

@@ -14,7 +14,7 @@ units = { path = "../units" }
 bitvec = { version = "1.0.1", features = ["alloc"] }
 smol = "2.0.2"
 rand = "0.9.2"
-tracing = "0.1.41"
+tracing = "0.1.44"
 
 [dev-dependencies]
 approx = "0.5.1"

ethercat-hal/src/devices/el6021.rs

@@ -328,6 +328,8 @@ impl TxPdoObject for Standard22ByteMdp600Input {
         self.status.overrun_error = bits[6];
         // Bit7 is reserved/unused
         self.length = bits[8..8 + 8].load_le::<u8>();
+        // the serial bytes start at bit 16, then we calculate the offset of when the serial bytes buffer is over, which for Standard22ByteMdp600Input is 22bytes
+        // to get the size in bits we do 22 * 8 -> 176bits
         let serial_bytes = bits[16..(16 + 22 * 8_usize)].chunks_exact(8);
         for (i, val) in serial_bytes.enumerate() {
             self.data[i] = val.load_le();

ethercat-hal/src/devices/wago_750_354.rs

@@ -8,6 +8,7 @@ use crate::{
         DynamicEthercatDevice, Module,
         wago_modules::{
             wago_750_501::{WAGO_750_501_MODULE_IDENT, WAGO_750_501_PRODUCT_ID},
+            wago_750_530::{WAGO_750_530_MODULE_IDENT, WAGO_750_530_PRODUCT_ID},
             wago_750_652::{WAGO_750_652_MODULE_IDENT, WAGO_750_652_PRODUCT_ID},
             wago_750_1506::{WAGO_750_1506_MODULE_IDENT, WAGO_750_1506_PRODUCT_ID},
         },
@@ -231,6 +232,10 @@ impl Wago750_354 {
                     module.has_tx = false;
                     module.has_rx = true;
                 }
+                WAGO_750_530_PRODUCT_ID => {
+                    module.has_tx = false;
+                    module.has_rx = true;
+                }
                 WAGO_750_652_PRODUCT_ID => {
                     module.has_tx = true;
                     module.has_rx = true;
@@ -259,6 +264,8 @@ impl Wago750_354 {
             let _ = self.get_pdo_offsets(device, false).await;
         });
 
+        println!("{:?}\n\n{:?}", self.tx_offsets, self.rx_offsets);
+
         for module in self.slots {
             match module {
                 Some(m) => {
@@ -270,6 +277,9 @@ impl Wago750_354 {
                         WAGO_750_501_MODULE_IDENT => {
                             Arc::new(RwLock::new(wago_750_501::Wago750_501::new()))
                         }
+                        WAGO_750_530_MODULE_IDENT => {
+                            Arc::new(RwLock::new(wago_750_530::Wago750_530::new()))
+                        }
                         WAGO_750_1506_MODULE_IDENT => {
                             Arc::new(RwLock::new(wago_750_1506::Wago750_1506::new()))
                         }

ethercat-hal/src/devices/wago_modules/mod.rs

@@ -1,4 +1,5 @@
 pub mod ip20_ec_di8_do8;
 pub mod wago_750_1506;
 pub mod wago_750_501;
+pub mod wago_750_530;
 pub mod wago_750_652;

ethercat-hal/src/devices/wago_modules/wago_750_530.rs

@@ -0,0 +1,260 @@
+use crate::devices::{
+    DynamicEthercatDevice, EthercatDevice, EthercatDeviceUsed, EthercatDynamicPDO, Module,
+    SubDeviceProductTuple,
+};
+use crate::devices::{EthercatDeviceProcessing, NewEthercatDevice};
+use crate::io::digital_output::{DigitalOutputDevice, DigitalOutputOutput};
+
+#[derive(Clone)]
+pub struct Wago750_530 {
+    is_used: bool,
+    tx_bit_offset: usize,
+    rx_bit_offset: usize,
+    pub rxpdo: Wago750_530RxPdo,
+    module: Option<Module>,
+}
+
+#[derive(Debug, Clone)]
+pub enum Wago750_530Port {
+    Port1,
+    Port2,
+    Port3,
+    Port4,
+    Port5,
+    Port6,
+    Port7,
+    Port8,
+}
+
+impl From<Wago750_530Port> for usize {
+    fn from(value: Wago750_530Port) -> Self {
+        match value {
+            Wago750_530Port::Port1 => 0,
+            Wago750_530Port::Port2 => 1,
+            Wago750_530Port::Port3 => 2,
+            Wago750_530Port::Port4 => 3,
+            Wago750_530Port::Port5 => 4,
+            Wago750_530Port::Port6 => 5,
+            Wago750_530Port::Port7 => 6,
+            Wago750_530Port::Port8 => 7,
+        }
+    }
+}
+
+#[derive(Clone, Default)]
+pub struct Wago750_530RxPdo {
+    pub port1: bool,
+    pub port2: bool,
+    pub port3: bool,
+    pub port4: bool,
+    pub port5: bool,
+    pub port6: bool,
+    pub port7: bool,
+    pub port8: bool,
+}
+
+impl DigitalOutputDevice<Wago750_530Port> for Wago750_530 {
+    /// Writes the new output value into the device's RXPDO structure (in-memory PDI).
+    fn set_output(&mut self, port: Wago750_530Port, value: DigitalOutputOutput) {
+        // The DigitalOutputOutput is converted to a bool using the From trait
+        let output_value: bool = value.into();
+        match port {
+            Wago750_530Port::Port1 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port1 = output_value;
+            }
+            Wago750_530Port::Port2 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port2 = output_value;
+            }
+            Wago750_530Port::Port3 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port3 = output_value;
+            }
+            Wago750_530Port::Port4 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port4 = output_value;
+            }
+            Wago750_530Port::Port5 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port5 = output_value;
+            }
+            Wago750_530Port::Port6 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port6 = output_value;
+            }
+            Wago750_530Port::Port7 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port7 = output_value;
+            }
+            Wago750_530Port::Port8 => {
+                // Modify the internal PDO representation
+                self.rxpdo.port8 = output_value;
+            }
+        }
+    }
+
+    /// Reads the current output value from the device's RXPDO structure (in-memory PDI).
+    fn get_output(&self, port: Wago750_530Port) -> DigitalOutputOutput {
+        let current_value = match port {
+            Wago750_530Port::Port1 => self.rxpdo.port1,
+            Wago750_530Port::Port2 => self.rxpdo.port2,
+            Wago750_530Port::Port3 => self.rxpdo.port3,
+            Wago750_530Port::Port4 => self.rxpdo.port4,
+            Wago750_530Port::Port5 => self.rxpdo.port5,
+            Wago750_530Port::Port6 => self.rxpdo.port6,
+            Wago750_530Port::Port7 => self.rxpdo.port7,
+            Wago750_530Port::Port8 => self.rxpdo.port8,
+        };
+
+        // Wrap the bool back into the type-safe wrapper
+        DigitalOutputOutput(current_value)
+    }
+}
+
+impl EthercatDeviceUsed for Wago750_530 {
+    fn is_used(&self) -> bool {
+        self.is_used
+    }
+
+    fn set_used(&mut self, used: bool) {
+        self.is_used = used;
+    }
+}
+
+impl DynamicEthercatDevice for Wago750_530 {}
+
+impl EthercatDynamicPDO for Wago750_530 {
+    fn get_tx_offset(&self) -> usize {
+        self.tx_bit_offset
+    }
+
+    fn get_rx_offset(&self) -> usize {
+        self.rx_bit_offset
+    }
+
+    fn set_tx_offset(&mut self, offset: usize) {
+        self.tx_bit_offset = offset
+    }
+
+    fn set_rx_offset(&mut self, offset: usize) {
+        self.rx_bit_offset = offset
+    }
+}
+
+impl EthercatDevice for Wago750_530 {
+    fn input(
+        &mut self,
+        _input: &bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
+    ) -> Result<(), anyhow::Error> {
+        Ok(())
+    }
+
+    fn input_len(&self) -> usize {
+        0
+    }
+
+    fn output(
+        &self,
+        output: &mut bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
+    ) -> Result<(), anyhow::Error> {
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port1),
+            self.rxpdo.port1,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port2),
+            self.rxpdo.port2,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port3),
+            self.rxpdo.port3,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port4),
+            self.rxpdo.port4,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port5),
+            self.rxpdo.port5,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port6),
+            self.rxpdo.port6,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port7),
+            self.rxpdo.port7,
+        );
+        output.set(
+            self.rx_bit_offset + Into::<usize>::into(Wago750_530Port::Port8),
+            self.rxpdo.port8,
+        );
+        Ok(())
+    }
+
+    fn output_len(&self) -> usize {
+        8
+    }
+
+    fn as_any(&self) -> &dyn std::any::Any {
+        self
+    }
+
+    fn as_any_mut(&mut self) -> &mut dyn std::any::Any {
+        self
+    }
+
+    fn is_module(&self) -> bool {
+        true
+    }
+
+    fn input_checked(
+        &mut self,
+        _input: &bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
+    ) -> Result<(), anyhow::Error> {
+        Ok(())
+    }
+
+    fn output_checked(
+        &self,
+        _output: &mut bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
+    ) -> Result<(), anyhow::Error> {
+        Ok(())
+    }
+
+    fn get_module(&self) -> Option<crate::devices::Module> {
+        self.module.clone()
+    }
+
+    fn set_module(&mut self, module: crate::devices::Module) {
+        self.tx_bit_offset = module.tx_offset;
+        self.rx_bit_offset = module.rx_offset;
+        self.module = Some(module)
+    }
+}
+
+impl EthercatDeviceProcessing for Wago750_530 {}
+
+impl NewEthercatDevice for Wago750_530 {
+    fn new() -> Self {
+        Self {
+            is_used: false,
+            tx_bit_offset: 0,
+            rx_bit_offset: 0,
+            module: None,
+            rxpdo: Wago750_530RxPdo::default(),
+        }
+    }
+}
+
+impl std::fmt::Debug for Wago750_530 {
+    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
+        write!(f, "Wago750_530")
+    }
+}
+
+pub const WAGO_750_530_VENDOR_ID: u32 = 0x00000021;
+pub const WAGO_750_530_PRODUCT_ID: u32 = 2147483778;
+pub const WAGO_750_530_MODULE_IDENT: SubDeviceProductTuple =
+    (WAGO_750_530_VENDOR_ID, WAGO_750_530_PRODUCT_ID);

ethercat-hal/src/devices/wago_modules/wago_750_652.rs

@@ -1,8 +1,12 @@
+use bitvec::field::BitField;
+
 use crate::devices::{
     DynamicEthercatDevice, EthercatDevice, EthercatDeviceUsed, EthercatDynamicPDO, Module,
     SubDeviceProductTuple,
 };
 use crate::devices::{EthercatDeviceProcessing, NewEthercatDevice};
+use crate::io::serial_interface::SerialInterfaceDevice;
+const WAGO750_652_MAX_BUF_LENGTH: usize = 48;
 
 #[derive(Clone)]
 pub struct Wago750_652 {
@@ -10,6 +14,62 @@ pub struct Wago750_652 {
     tx_bit_offset: usize,
     rx_bit_offset: usize,
     module: Option<Module>,
+    started_init: bool,
+    pub rx_pdo: Wago750_652RxPdo,
+    pub tx_pdo: Wago750_652TxPdo,
+    has_messages_last_toggle: bool,
+}
+
+#[derive(Clone, Default, Debug)]
+pub struct Wago750_652Control {
+    pub transmit_request: bool, // Transmit request
+    pub receive_ack: bool,      // Receive acknowledge
+    pub init_request: bool,     // Initialization request
+    pub send_continuous: bool,  // Send continuous
+    pub output_length: usize,
+}
+
+#[derive(Clone, Debug)]
+pub struct Wago750_652RxPdo {
+    pub control: Wago750_652Control,
+    pub out_buffer: [u8; WAGO750_652_MAX_BUF_LENGTH],
+}
+
+impl Default for Wago750_652RxPdo {
+    fn default() -> Self {
+        Self {
+            control: Default::default(),
+            out_buffer: [0u8; WAGO750_652_MAX_BUF_LENGTH],
+        }
+    }
+}
+
+#[derive(Clone, Default, Debug)]
+pub struct Wago750_652Status {
+    pub transmit_ack: bool, //
+    pub receive_request: bool,
+    pub init_ack: bool,
+    pub buf_full: bool,
+    pub buf_empty: bool, // Buffer is empty (Sending inactive)
+    pub error_parity: bool,
+    pub error_framing: bool, // Frame is corrupt?
+    pub error_overrun: bool, // Byte/s was lost on receive
+    pub input_length: usize,
+}
+
+#[derive(Clone, Debug)]
+pub struct Wago750_652TxPdo {
+    pub status: Wago750_652Status,
+    pub in_buffer: [u8; WAGO750_652_MAX_BUF_LENGTH],
+}
+
+impl Default for Wago750_652TxPdo {
+    fn default() -> Self {
+        Self {
+            status: Default::default(),
+            in_buffer: [0u8; WAGO750_652_MAX_BUF_LENGTH],
+        }
+    }
 }
 
 impl EthercatDeviceUsed for Wago750_652 {
@@ -23,7 +83,6 @@ impl EthercatDeviceUsed for Wago750_652 {
 }
 
 impl DynamicEthercatDevice for Wago750_652 {}
-
 impl EthercatDynamicPDO for Wago750_652 {
     fn get_tx_offset(&self) -> usize {
         self.tx_bit_offset
@@ -48,24 +107,84 @@ impl EthercatDevice for Wago750_652 {
     */
     fn input(
         &mut self,
-        _input: &bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
+        input: &bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
     ) -> Result<(), anyhow::Error> {
+        self.tx_pdo.in_buffer.fill(0u8);
+        let base = self.tx_bit_offset;
+
+        self.tx_pdo.status.transmit_ack = *input.get(base + 0).expect("Missing buf_empty bit");
+        self.tx_pdo.status.receive_request = *input.get(base + 1).expect("Missing buf_empty bit");
+        self.tx_pdo.status.init_ack = *input.get(base + 2).expect("Missing buf_empty bit");
+        self.tx_pdo.status.buf_full = *input.get(base + 6).expect("Missing buf_empty bit");
+        self.tx_pdo.status.buf_empty = *input.get(base + 11).expect("Missing buf_empty bit");
+        self.tx_pdo.status.error_parity = *input.get(base + 13).expect("Missing buf_empty bit");
+        self.tx_pdo.status.error_framing = *input.get(base + 14).expect("Missing buf_empty bit");
+        self.tx_pdo.status.error_overrun = *input.get(base + 15).expect("Missing buf_empty bit");
+        // Im sorry but this is what you get by splitting the len across different bytes ...
+        self.tx_pdo.status.input_length = ((*input.get(base + 3).expect("Missing buf_empty bit")
+            as u8)
+            ^ ((*input.get(base + 4).expect("Missing buf_empty bit") as u8) << 1)
+            ^ ((*input.get(base + 5).expect("Missing buf_empty bit") as u8) << 2)
+            ^ ((*input.get(base + 8).expect("Missing buf_empty bit") as u8) << 3)
+            ^ ((*input.get(base + 9).expect("Missing buf_empty bit") as u8) << 4)
+            ^ ((*input.get(base + 10).expect("Missing buf_empty bit") as u8) << 5))
+            as usize;
+
+        // the serial bytes start at bit 16,
+        // then we calculate the offset of when the serial bytes buffer is over, which for the 24byte pdo is 22bytes
+        // to get the size in bits we do 22 * 8 -> 176bits
+        let serial_bytes = input[(base + 16)..((base + 16) + 22 * 8_usize)].chunks_exact(8);
+        for (i, val) in serial_bytes.enumerate() {
+            self.tx_pdo.in_buffer[i] = val.load_le();
+        }
         Ok(())
     }
 
     fn input_len(&self) -> usize {
-        0
+        24
     }
 
     fn output(
         &self,
-        _output: &mut bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
+        output: &mut bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
     ) -> Result<(), anyhow::Error> {
+        let base = 32;
+
+        let mut ol0_i = 5; // Ol0 starts at bit 5 and goes to bit 7 (inclusive) 
+        let mut ol1_i = 8;
+
+        output.set(base + 0, self.rx_pdo.control.transmit_request);
+        output.set(base + 1, self.rx_pdo.control.receive_ack);
+        output.set(base + 2, self.rx_pdo.control.init_request);
+        output.set(base + 3, self.rx_pdo.control.send_continuous);
+
+        for i in 0..3 {
+            // Rust type system proceeds to annoy once again, we need to add a != at the end, because a cast to bool is just too dangeerous obviously
+            output.set(
+                base + ol0_i,
+                ((self.rx_pdo.control.output_length >> i) & 1) != 0,
+            );
+            ol0_i += 1;
+        }
+
+        for i in 3..6 {
+            output.set(
+                base + ol1_i,
+                ((self.rx_pdo.control.output_length >> i) & 1) != 0,
+            );
+            ol1_i += 1;
+        }
+        println!("{}", self.rx_pdo.control.output_length);
+        let data_start = base + 16;
+        for (i, &byte) in self.rx_pdo.out_buffer.iter().take(22).enumerate() {
+            output[(data_start + i * 8)..(data_start + (i + 1) * 8)].store_le(byte);
+        }
+        //println!("{:?}",self.rx_pdo.out_buffer);
         Ok(())
     }
 
     fn output_len(&self) -> usize {
-        0
+        24
     }
 
     fn as_any(&self) -> &dyn std::any::Any {
@@ -84,19 +203,6 @@ impl EthercatDevice for Wago750_652 {
         &mut self,
         input: &bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
     ) -> Result<(), anyhow::Error> {
-        // validate input has correct length
-        let expected = self.input_len();
-        let actual = input.len();
-        if actual != expected {
-            return Err(anyhow::anyhow!(
-                "[{}::Device::input_checked] Input length is {} ({} bytes) and must be {} bits ({} bytes)",
-                module_path!(),
-                actual,
-                actual / 8,
-                expected,
-                expected / 8
-            ));
-        }
         self.input(input)
     }
 
@@ -105,21 +211,6 @@ impl EthercatDevice for Wago750_652 {
         output: &mut bitvec::prelude::BitSlice<u8, bitvec::prelude::Lsb0>,
     ) -> Result<(), anyhow::Error> {
         self.output(output)?;
-
-        // validate input has correct length
-        let expected = self.output_len();
-        let actual = output.len();
-        if output.len() != expected {
-            return Err(anyhow::anyhow!(
-                "[{}::Device::output_checked] Output length is {} ({} bytes) and must be {} bits ({} bytes)",
-                module_path!(),
-                actual,
-                actual / 8,
-                expected,
-                expected / 8
-            ));
-        }
-
         Ok(())
     }
 
@@ -143,6 +234,10 @@ impl NewEthercatDevice for Wago750_652 {
             tx_bit_offset: 0,
             rx_bit_offset: 0,
             module: None,
+            rx_pdo: Wago750_652RxPdo::default(),
+            tx_pdo: Wago750_652TxPdo::default(),
+            started_init: false,
+            has_messages_last_toggle: false,
         }
     }
 }
@@ -153,6 +248,108 @@ impl std::fmt::Debug for Wago750_652 {
     }
 }
 
+#[derive(Clone)]
+pub enum Wago750_652Port {
+    SI1, // Serial
+}
+
+impl SerialInterfaceDevice<Wago750_652Port> for Wago750_652 {
+    fn serial_interface_read_message(&mut self, port: Wago750_652Port) -> Option<Vec<u8>> {
+        if !self.serial_interface_has_messages(port) {
+            return None;
+        } else {
+            let in_len = self.tx_pdo.status.input_length;
+            let received_data = self.tx_pdo.in_buffer[0..in_len].to_vec();
+
+            if received_data.is_empty() {
+                return None;
+            }
+
+            self.has_messages_last_toggle = self.tx_pdo.status.receive_request;
+            self.rx_pdo.control.receive_ack = !self.rx_pdo.control.receive_ack;
+
+            Some(received_data)
+        }
+    }
+
+    fn serial_interface_write_message(
+        &mut self,
+        _port: Wago750_652Port,
+        message: Vec<u8>,
+    ) -> Result<bool, anyhow::Error> {
+        if message.len() > WAGO750_652_MAX_BUF_LENGTH {
+            return Err(anyhow::anyhow!(
+                "Message is too long for RxPdo Buffer of 22 bytes!"
+            ));
+        }
+
+        if message.is_empty() {
+            return Ok(self.rx_pdo.control.transmit_request == self.tx_pdo.status.transmit_ack);
+        }
+
+        let bytes = message.as_slice();
+        self.rx_pdo.control.output_length = message.len();
+        self.rx_pdo.out_buffer.fill(0u8);
+        self.rx_pdo.out_buffer[0..message.len()].copy_from_slice(&bytes[0..message.len()]);
+        self.rx_pdo.control.transmit_request = !self.rx_pdo.control.transmit_request;
+        Ok(true)
+    }
+
+    fn serial_interface_has_messages(&mut self, _port: Wago750_652Port) -> bool {
+        return self.tx_pdo.status.receive_request != self.has_messages_last_toggle;
+    }
+
+    fn get_serial_encoding(
+        &self,
+        _port: Wago750_652Port,
+    ) -> Option<crate::io::serial_interface::SerialEncoding> {
+        None
+    }
+
+    fn get_baudrate(&self, _port: Wago750_652Port) -> Option<u32> {
+        // Right now we cant change it on the fly because WAGO ONLY supports setting via
+        // Codesys OR WAGO I/O Check the way it is set with Codesys is also NOT documented ...
+        // My Hunch is that the 0x2010 0x2011 register can be used to configure that with COE its not documented though
+        None
+    }
+
+    /*
+        Needs to be called multiple times until it returns true, at which point it is ready to be used
+    */
+    fn serial_interface_initialize(&mut self, port: Wago750_652Port) -> bool {
+        match port {
+            Wago750_652Port::SI1 => {
+                if !self.rx_pdo.control.init_request
+                    && !self.tx_pdo.status.init_ack
+                    && !self.started_init
+                {
+                    self.rx_pdo.control.init_request = true;
+                    self.started_init = true;
+                    return false;
+                }
+
+                if self.rx_pdo.control.init_request && self.tx_pdo.status.init_ack {
+                    self.rx_pdo.control.init_request = false;
+                    return false;
+                }
+
+                if !self.rx_pdo.control.init_request && self.tx_pdo.status.init_ack {
+                    return false;
+                }
+
+                if !self.rx_pdo.control.init_request
+                    && !self.tx_pdo.status.init_ack
+                    && self.started_init
+                {
+                    self.has_messages_last_toggle = self.tx_pdo.status.receive_request;
+                    return true;
+                }
+                false
+            }
+        }
+    }
+}
+
 pub const WAGO_750_652_VENDOR_ID: u32 = 0x00000021;
 pub const WAGO_750_652_PRODUCT_ID: u32 = 106043250;
 pub const WAGO_750_652_MODULE_IDENT: SubDeviceProductTuple =

flake.nix

@@ -5,9 +5,7 @@
     nixpkgs.url = "github:nixos/nixpkgs/nixos-25.05";
 
     # Crane for Rust builds with dependency caching
-    crane = {
-      url = "github:ipetkov/crane";
-    };
+    crane = { url = "github:ipetkov/crane"; };
 
     home-manager = {
       url = "github:nix-community/home-manager";
@@ -21,24 +19,21 @@
     };
 
     # Add flake-utils which was missing
-    flake-utils = {
-      url = "github:numtide/flake-utils";
-    };
+    flake-utils = { url = "github:numtide/flake-utils"; };
   };
 
-  outputs = { self, nixpkgs, crane, flake-utils, qitech-control, home-manager, ... }:
+  outputs =
+    { self, nixpkgs, crane, flake-utils, qitech-control, home-manager, ... }:
     flake-utils.lib.eachDefaultSystem (system:
       let
         overlays = [
-          # Add our own overlay for QiTech packages
+          # Add our own overlay for QiTech packages with commit hash support
           (final: prev: {
             qitechPackages = {
               server = final.callPackage ./nixos/packages/server.nix {
-                craneLib = crane.mkLib final;
-              };
-              electron = final.callPackage ./nixos/packages/electron.nix {
-                nodejs = final.nodejs_22;
+                craneLib = crane.mkLib pkgs;
               };
+              electron = final.callPackage ./nixos/packages/electron.nix { };
             };
           })
         ];
@@ -46,8 +41,6 @@
         pkgs = import nixpkgs { inherit system overlays; };
         gitInfo = import ./nixos/gitInfo.nix { inherit pkgs; };
 
-        craneLib = crane.mkLib pkgs;
-
         # Use Rust 1.86 stable from nixpkgs
         rust = pkgs.rustc;
       in {
@@ -57,16 +50,21 @@
           default = self.packages.${system}.server;
         };
 
-        devShells.default = craneLib.devShell {
+        devShells.default = pkgs.mkShell {
           packages = with pkgs; [
+            cargo
+            rustc
             pkg-config
             libudev-zero
             libpcap
             nodejs_22
             nodePackages.npm
             lldb
+            electron
           ];
 
+          ELECTON_SKIP_BINARY_DOWNLOAD = 1;
+
           hardeningDisable = [ "fortify" ];
 
           shellHook = ''
@@ -75,55 +73,53 @@
             echo "Node version: $(${pkgs.nodejs_22}/bin/node --version)"
           '';
         };
-      }
-    ) // {
-      nixosModules.qitech = import ./nixos/modules/qitech.nix;
-      nixosModules.default = self.nixosModules.qitech;
+      }) // {
+        nixosModules.qitech = import ./nixos/modules/qitech.nix;
+        nixosModules.default = self.nixosModules.qitech;
 
-      # Define nixosConfigurations outside of eachDefaultSystem
-      nixosConfigurations =
-      let
-        system = builtins.currentSystem;
-        pkgs = import nixpkgs { inherit system; };
-        gitInfo = import ./nixos/gitInfo.nix { inherit pkgs; };
-      in {
-        # Replace "nixos" with your actual hostname
-        nixos = nixpkgs.lib.nixosSystem {
-          system = system;
-          specialArgs = {
-            gitInfo = gitInfo; # Pass gitInfo to modules
+        # Define nixosConfigurations outside of eachDefaultSystem
+        nixosConfigurations = let
+          system = builtins.currentSystem;
+          pkgs = import nixpkgs { inherit system; };
+          gitInfo = import ./nixos/gitInfo.nix { inherit pkgs; };
+        in {
+          # Replace "nixos" with your actual hostname
+          nixos = nixpkgs.lib.nixosSystem {
+            system = system;
+            specialArgs = {
+              gitInfo = gitInfo; # Pass gitInfo to modules
+            };
+            modules = [
+              # Apply the overlays to the system
+              {
+                nixpkgs.overlays = [
+                  # Add our own overlay for QiTech packages with commit hash support
+                  (final: prev: {
+                    qitechPackages = {
+                      server = final.callPackage ./nixos/packages/server.nix {
+                        craneLib = crane.mkLib final;
+                      };
+                      electron =
+                        final.callPackage ./nixos/packages/electron.nix { };
+                    };
+                  })
+                ];
+              }
+
+              ./nixos/os/configuration.nix
+
+              # QiTech Control module
+              self.nixosModules.qitech
+
+              # Home Manager module
+              home-manager.nixosModules.home-manager
+              {
+                home-manager.useGlobalPkgs = true;
+                home-manager.useUserPackages = true;
+                home-manager.users.qitech = import ./nixos/os/home.nix;
+              }
+            ];
           };
-          modules = [
-            # Apply the overlays to the system
-            { nixpkgs.overlays = [
-                # Add our own overlay for QiTech packages with commit hash support
-                (final: prev: {
-                  qitechPackages = {
-                    server = final.callPackage ./nixos/packages/server.nix {
-                      craneLib = crane.mkLib final;
-                    };
-                    electron = final.callPackage ./nixos/packages/electron.nix {
-                      nodejs = final.nodejs_22;
-                    };
-                  };
-                })
-              ];
-            }
-
-            ./nixos/os/configuration.nix
-
-            # QiTech Control module
-            self.nixosModules.qitech
-
-            # Home Manager module
-            home-manager.nixosModules.home-manager
-            {
-              home-manager.useGlobalPkgs = true;
-              home-manager.useUserPackages = true;
-              home-manager.users.qitech = import ./nixos/os/home.nix;
-            }
-          ];
         };
       };
-    };
 }

machines/Cargo.toml

@@ -28,7 +28,7 @@ socketioxide = { version = "0.17.2", features = ["msgpack"] }
 serialport = "4.7.3"
 
 #tracing
-tracing = { version = "0.1.41", features = ["attributes"] }
+tracing = { version = "0.1.44", features = ["attributes"] }
 tonic = { version = "0.13.1", optional = true }
 
 [dev-dependencies]

machines/src/analog_input_test_machine/act.rs

@@ -1,21 +1,32 @@
 use std::time::{Duration, Instant, SystemTime, UNIX_EPOCH};
 
-use crate::{MachineAct, analog_input_test_machine::AnalogInputTestMachine};
+use crate::{
+    MachineAct, MachineMessage, MachineValues, analog_input_test_machine::AnalogInputTestMachine,
+};
 
 impl MachineAct for AnalogInputTestMachine {
-    fn act_machine_message(&mut self, msg: crate::MachineMessage) {
+    fn act_machine_message(&mut self, msg: MachineMessage) {
         match msg {
-            crate::MachineMessage::SubscribeNamespace(namespace) => {
+            MachineMessage::SubscribeNamespace(namespace) => {
                 self.namespace.namespace = Some(namespace);
                 self.emit_measurement_rate();
             }
-            crate::MachineMessage::UnsubscribeNamespace => self.namespace.namespace = None,
-            crate::MachineMessage::HttpApiJsonRequest(value) => {
+            MachineMessage::UnsubscribeNamespace => self.namespace.namespace = None,
+            MachineMessage::HttpApiJsonRequest(value) => {
                 use crate::MachineApi;
                 let _res = self.api_mutate(value);
             }
             crate::MachineMessage::ConnectToMachine(_machine_connection) => {}
-            crate::MachineMessage::DisconnectMachine(_machine_connection) => {}
+            MachineMessage::DisconnectMachine(_machine_connection) => {}
+            MachineMessage::RequestValues(sender) => {
+                sender
+                    .send_blocking(MachineValues {
+                        state: serde_json::Value::Null,
+                        live_values: serde_json::Value::Null,
+                    })
+                    .expect("Failed to send values");
+                sender.close();
+            }
         }
     }
 

machines/src/analog_input_test_machine/new.rs

@@ -28,7 +28,7 @@ impl MachineNewTrait for AnalogInputTestMachine {
             MachineNewHardware::Ethercat(x) => x,
             _ => {
                 return Err(anyhow::anyhow!(
-                    "[{}::MachineNewTrait/TestMachine::new] MachineNewHardware is not Ethercat",
+                    "[{}::EtherCATMachine/TestMachine::new] MachineNewHardware is not Ethercat",
                     module_path!()
                 ));
             }
@@ -51,7 +51,7 @@ impl MachineNewTrait for AnalogInputTestMachine {
                 api_sender: sender,
                 machine_identification_unique: params.get_machine_identification_unique(),
                 main_sender: params.main_thread_channel.clone(),
-                namespace: namespace,
+                namespace,
 
                 last_measurement: Instant::now(),
                 measurement_rate_hz: 1.0,

machines/src/aquapath1/act.rs

@@ -1,5 +1,5 @@
 use super::{AquaPathV1, AquaPathV1Mode};
-use crate::{MachineAct, MachineMessage};
+use crate::{MachineAct, MachineMessage, MachineValues};
 use std::time::{Duration, Instant};
 
 impl MachineAct for AquaPathV1 {
@@ -45,14 +45,21 @@ impl MachineAct for AquaPathV1 {
                 let _res = self.api_mutate(value);
             }
             MachineMessage::ConnectToMachine(_machine_connection) =>
-            /*Doesnt connect to any Machine so do nothing*/
-            {
-                ()
-            }
+                /*Doesnt connect to any Machine so do nothing*/
+                {}
             MachineMessage::DisconnectMachine(_machine_connection) =>
-            /*Doesnt connect to any Machine so do nothing*/
-            {
-                ()
+                /*Doesnt connect to any Machine so do nothing*/
+                {}
+            MachineMessage::RequestValues(sender) => {
+                sender
+                    .send_blocking(MachineValues {
+                        state: serde_json::to_value(self.get_state())
+                            .expect("Failed to serialize state"),
+                        live_values: serde_json::to_value(self.get_live_values())
+                            .expect("Failed to serialize live values"),
+                    })
+                    .expect("Failed to send values");
+                sender.close();
             }
         }
     }

machines/src/aquapath1/mod.rs

@@ -109,8 +109,8 @@ impl std::fmt::Display for AquaPathV1 {
 }
 
 impl AquaPathV1 {
-    pub fn emit_live_values(&mut self) {
-        let live_values = LiveValuesEvent {
+    pub fn get_live_values(&self) -> LiveValuesEvent {
+        LiveValuesEvent {
             front_temperature: self
                 .front_controller
                 .current_temperature
@@ -123,13 +123,16 @@ impl AquaPathV1 {
             back_flow: self.back_controller.current_flow.get::<liter_per_minute>(),
             front_temp_reservoir: self.front_controller.temp_reservoir.get::<degree_celsius>(),
             back_temp_reservoir: self.back_controller.temp_reservoir.get::<degree_celsius>(),
-        };
-        let event = live_values.build();
+        }
+    }
+
+    pub fn emit_live_values(&mut self) {
+        let event = self.get_live_values().build();
         self.namespace.emit(AquaPathV1Events::LiveValues(event));
     }
 
-    pub fn emit_state(&mut self) {
-        let state = StateEvent {
+    pub fn get_state(&self) -> StateEvent {
+        StateEvent {
             is_default_state: false,
             mode_state: ModeState {
                 mode: self.mode.clone(),
@@ -167,9 +170,11 @@ impl AquaPathV1 {
                     should_flow: self.back_controller.should_pump,
                 },
             },
-        };
+        }
+    }
 
-        let event = state.build();
+    pub fn emit_state(&mut self) {
+        let event = self.get_state().build();
         self.namespace.emit(AquaPathV1Events::State(event));
     }
 }

machines/src/buffer1/act.rs

@@ -1,5 +1,5 @@
 use super::BufferV1;
-use crate::{MachineAct, MachineMessage};
+use crate::{MachineAct, MachineMessage, MachineValues};
 use std::time::{Duration, Instant};
 
 impl MachineAct for BufferV1 {
@@ -33,14 +33,21 @@ impl MachineAct for BufferV1 {
                 let _res = self.api_mutate(value);
             }
             MachineMessage::ConnectToMachine(_machine_connection) =>
-            /*Doesnt connect to any Machine so do nothing*/
-            {
-                ()
-            }
+                /*Doesnt connect to any Machine so do nothing*/
+                {}
             MachineMessage::DisconnectMachine(_machine_connection) =>
-            /*Doesnt connect to any Machine so do nothing*/
-            {
-                ()
+                /*Doesnt connect to any Machine so do nothing*/
+                {}
+            MachineMessage::RequestValues(sender) => {
+                sender
+                    .send_blocking(MachineValues {
+                        state: serde_json::to_value(self.get_state())
+                            .expect("Failed to serialize state"),
+                        live_values: serde_json::to_value(self.get_live_values())
+                            .expect("Failed to serialize live values"),
+                    })
+                    .expect("Failed to send values");
+                sender.close();
             }
         }
     }

machines/src/buffer1/mod.rs

@@ -48,21 +48,27 @@ impl BufferV1 {
         vendor: VENDOR_QITECH,
         machine: MACHINE_BUFFER_V1,
     };
-    pub fn emit_live_values(&mut self) {
-        let live_values = LiveValuesEvent {};
 
-        let event = live_values.build();
+    pub fn get_live_values(&mut self) -> LiveValuesEvent {
+        LiveValuesEvent {}
+    }
+
+    pub fn emit_live_values(&mut self) {
+        let event = self.get_live_values().build();
         self.namespace.emit(BufferV1Events::LiveValues(event));
     }
-    pub fn emit_state(&mut self) {
-        let state = StateEvent {
+
+    pub fn get_state(&self) -> StateEvent {
+        StateEvent {
             mode_state: ModeState {
                 mode: self.mode.clone(),
             },
             // connected_machine_state: self.connected_winder.to_state(),
-        };
+        }
+    }
 
-        let event = state.build();
+    pub fn emit_state(&mut self) {
+        let event = self.get_state().build();
         self.namespace.emit(BufferV1Events::State(event));
     }
 

machines/src/extruder1/act.rs

@@ -1,7 +1,7 @@
 #[cfg(not(feature = "mock-machine"))]
 use crate::extruder1::ExtruderV2;
 #[cfg(not(feature = "mock-machine"))]
-use crate::{MachineAct, MachineMessage};
+use crate::{MachineAct, MachineMessage, MachineValues};
 #[cfg(not(feature = "mock-machine"))]
 use std::time::{Duration, Instant};
 
@@ -41,6 +41,7 @@ impl MachineAct for ExtruderV2 {
 
         // more than 33ms have passed since last emit (30 "fps" target)
         if now.duration_since(self.last_measurement_emit) > Duration::from_secs_f64(1.0 / 30.0) {
+            self.update_total_energy(now);
             self.maybe_emit_state_event();
             // Emit live values at 30 FPS
             self.emit_live_values();
@@ -61,11 +62,20 @@ impl MachineAct for ExtruderV2 {
 
                 let _res = self.api_mutate(value);
             }
-            MachineMessage::ConnectToMachine(_machine_connection) => (),
+            MachineMessage::ConnectToMachine(_machine_connection) => {}
             MachineMessage::DisconnectMachine(_machine_connection) =>
-            /*Doesnt connect to any Machine so do nothing*/
-            {
-                ()
+                /*Doesnt connect to any Machine so do nothing*/
+                {}
+            MachineMessage::RequestValues(sender) => {
+                sender
+                    .send_blocking(MachineValues {
+                        state: serde_json::to_value(self.get_state())
+                            .expect("Failed to serialize state"),
+                        live_values: serde_json::to_value(self.get_live_values())
+                            .expect("Failed to serialize live values"),
+                    })
+                    .expect("Failed to send values");
+                sender.close();
             }
         }
     }

machines/src/extruder1/emit.rs

@@ -25,11 +25,11 @@ use units::{angular_velocity::revolution_per_minute, thermodynamic_temperature::
 
 #[cfg(not(feature = "mock-machine"))]
 impl ExtruderV2 {
-    pub fn build_state_event(&mut self) -> StateEvent {
-        use crate::extruder1::api::{TemperaturePid, TemperaturePidStates};
+    pub fn get_state(&self) -> StateEvent {
+        use crate::extruder1::api::TemperaturePidStates;
 
         StateEvent {
-            is_default_state: !std::mem::replace(&mut self.emitted_default_state, true),
+            is_default_state: !self.emitted_default_state,
             rotation_state: RotationState {
                 forward: self.screw_speed_controller.get_rotation_direction(),
             },
@@ -141,16 +141,14 @@ impl ExtruderV2 {
             },
         }
     }
-}
 
-#[cfg(not(feature = "mock-machine"))]
-impl ExtruderV2 {
     pub fn emit_state(&mut self) {
-        let state = self.build_state_event();
+        let state = self.get_state();
         let hash = hash_with_serde_model(self.screw_speed_controller.get_inverter_status());
         self.last_status_hash = Some(hash);
         let event = state.build();
         self.namespace.emit(ExtruderV2Events::State(event));
+        self.emitted_default_state = true;
     }
 
     pub fn maybe_emit_state_event(&mut self) {
@@ -168,13 +166,8 @@ impl ExtruderV2 {
         }
     }
 
-    pub fn emit_live_values(&mut self) {
-        use std::time::Instant;
-        let now = Instant::now();
-        let combined_power = self.calculate_combined_power();
-        self.update_total_energy(combined_power, now);
-
-        let live_values = LiveValuesEvent {
+    pub fn get_live_values(&self) -> LiveValuesEvent {
+        LiveValuesEvent {
             motor_status: self.screw_speed_controller.get_motor_status().into(),
             pressure: self.screw_speed_controller.get_pressure().get::<bar>(),
             nozzle_temperature: self
@@ -209,11 +202,13 @@ impl ExtruderV2 {
             middle_power: self
                 .temperature_controller_middle
                 .get_heating_element_wattage(),
-            combined_power,
+            combined_power: self.calculate_combined_power(),
             total_energy_kwh: self.total_energy_kwh,
-        };
+        }
+    }
 
-        let event = live_values.build();
+    pub fn emit_live_values(&mut self) {
+        let event = self.get_live_values().build();
         self.namespace.emit(ExtruderV2Events::LiveValues(event));
     }
 

machines/src/extruder1/mock/act.rs

@@ -1,6 +1,6 @@
 use super::ExtruderV2;
 use crate::MachineAct;
-use crate::MachineMessage;
+use crate::{MachineMessage, MachineValues};
 use std::time::{Duration, Instant};
 
 impl MachineAct for ExtruderV2 {
@@ -40,6 +40,17 @@ impl MachineAct for ExtruderV2 {
             {
                 ()
             }
+            MachineMessage::RequestValues(sender) => {
+                sender
+                    .send_blocking(MachineValues {
+                        state: serde_json::to_value(self.build_state_event())
+                            .expect("Failed to serialize state"),
+                        live_values: serde_json::to_value(self.get_live_values())
+                            .expect("Failed to serialize live values"),
+                    })
+                    .expect("Failed to send values");
+                sender.close();
+            }
         }
     }
 }

machines/src/extruder1/mock/mock_emit.rs

@@ -51,8 +51,8 @@ impl ExtruderV2 {
         }
     }
 
-    pub fn emit_live_values(&mut self) {
-        let live_values = LiveValuesEvent {
+    pub fn get_live_values(&mut self) -> LiveValuesEvent {
+        LiveValuesEvent {
             motor_status: self.motor_status.clone(),
             pressure: self.pressure,
             nozzle_temperature: self.nozzle_temperature,
@@ -65,9 +65,11 @@ impl ExtruderV2 {
             middle_power: self.middle_power,
             combined_power: self.combined_power,
             total_energy_kwh: self.total_energy_kwh,
-        };
+        }
+    }
 
-        let event = live_values.build();
+    pub fn emit_live_values(&mut self) {
+        let event = self.get_live_values().build();
         self.namespace.emit(ExtruderV2Events::LiveValues(event));
     }
 

machines/src/extruder1/mod.rs

@@ -100,6 +100,9 @@ pub struct ExtruderV2 {
     emitted_default_state: bool,
 }
 
+#[cfg(feature = "mock-machine")]
+pub use mock::ExtruderV2;
+
 #[cfg(not(feature = "mock-machine"))]
 impl Machine for ExtruderV2 {
     fn get_machine_identification_unique(&self) -> MachineIdentificationUnique {
@@ -129,7 +132,7 @@ impl ExtruderV2 {
 #[cfg(not(feature = "mock-machine"))]
 impl ExtruderV2 {
     /// Calculate combined power consumption in watts
-    fn calculate_combined_power(&mut self) -> f64 {
+    fn calculate_combined_power(&self) -> f64 {
         let motor_power = {
             let motor_status = &self.screw_speed_controller.inverter.motor_status;
             let voltage = motor_status.voltage.get::<volt>();
@@ -153,10 +156,11 @@ impl ExtruderV2 {
     }
 
     /// Update total energy consumption in kWh
-    fn update_total_energy(&mut self, current_power_watts: f64, now: Instant) {
+    fn update_total_energy(&mut self, now: Instant) {
+        let power_watts = self.calculate_combined_power();
         if let Some(last_time) = self.last_energy_calculation_time {
             let time_delta_hours = now.duration_since(last_time).as_secs_f64() / 3600.0;
-            let energy_delta_kwh = (current_power_watts / 1000.0) * time_delta_hours;
+            let energy_delta_kwh = (power_watts / 1000.0) * time_delta_hours;
             self.total_energy_kwh += energy_delta_kwh;
         }
         self.last_energy_calculation_time = Some(now);

machines/src/extruder1/screw_speed_controller.rs

@@ -77,11 +77,11 @@ impl ScrewSpeedController {
         self.nozzle_pressure_limit = pressure;
     }
 
-    pub fn get_nozzle_pressure_limit(&mut self) -> Pressure {
+    pub fn get_nozzle_pressure_limit(&self) -> Pressure {
         self.nozzle_pressure_limit
     }
 
-    pub const fn get_nozzle_pressure_limit_enabled(&mut self) -> bool {
+    pub const fn get_nozzle_pressure_limit_enabled(&self) -> bool {
         self.nozzle_pressure_limit_enabled
     }
 
@@ -89,11 +89,11 @@ impl ScrewSpeedController {
         self.nozzle_pressure_limit_enabled = enabled;
     }
 
-    pub fn get_target_rpm(&mut self) -> AngularVelocity {
+    pub fn get_target_rpm(&self) -> AngularVelocity {
         self.target_rpm
     }
 
-    pub const fn get_rotation_direction(&mut self) -> bool {
+    pub const fn get_rotation_direction(&self) -> bool {
         self.forward_rotation
     }
 
@@ -129,7 +129,7 @@ impl ScrewSpeedController {
         self.inverter.set_frequency_target(target_frequency);
     }
 
-    pub const fn get_uses_rpm(&mut self) -> bool {
+    pub const fn get_uses_rpm(&self) -> bool {
         self.uses_rpm
     }
 
@@ -148,7 +148,7 @@ impl ScrewSpeedController {
         self.motor_on = true;
     }
 
-    pub fn get_motor_status(&mut self) -> MotorStatus {
+    pub fn get_motor_status(&self) -> MotorStatus {
         let frequency = self.inverter.motor_status.frequency;
         let rpm =
             AngularVelocity::new::<revolution_per_minute>(frequency.get::<cycle_per_minute>());
@@ -197,7 +197,7 @@ impl ScrewSpeedController {
         self.pid.reset()
     }
 
-    pub fn get_pressure(&mut self) -> Pressure {
+    pub fn get_pressure(&self) -> Pressure {
         let current_result = self.get_sensor_current();
         let current = match current_result {
             Ok(current) => current.get::<milliampere>(),

machines/src/extruder1/temperature_controller.rs

@@ -70,7 +70,7 @@ impl TemperatureController {
         self.heating_allowed = true;
     }
 
-    pub fn get_heating_element_wattage(&mut self) -> f64 {
+    pub fn get_heating_element_wattage(&self) -> f64 {
         self.temperature_pid_output * self.heating_element_wattage
     }
 

machines/src/extruder2/act.rs

@@ -2,7 +2,7 @@
 use std::time::Instant;
 
 #[cfg(not(feature = "mock-machine"))]
-use crate::{MachineAct, MachineMessage};
+use crate::{MachineAct, MachineMessage, MachineValues};
 
 #[cfg(not(feature = "mock-machine"))]
 use super::ExtruderV3;
@@ -65,11 +65,20 @@ impl MachineAct for ExtruderV3 {
 
                 let _res = self.api_mutate(value);
             }
-            MachineMessage::ConnectToMachine(_machine_connection) => (),
+            MachineMessage::ConnectToMachine(_machine_connection) => {}
             MachineMessage::DisconnectMachine(_machine_connection) =>
-            /*Doesnt connect to any Machine so do nothing*/
-            {
-                ()
+                /*Doesnt connect to any Machine so do nothing*/
+                {}
+            MachineMessage::RequestValues(sender) => {
+                sender
+                    .send_blocking(MachineValues {
+                        state: serde_json::to_value(self.build_state_event())
+                            .expect("Failed to serialize state"),
+                        live_values: serde_json::to_value(self.get_live_values())
+                            .expect("Failed to serialize live values"),
+                    })
+                    .expect("Failed to send values");
+                sender.close();
             }
         }
     }

machines/src/extruder2/emit.rs

@@ -9,6 +9,8 @@ use crate::extruder1::{
     },
 };
 #[cfg(not(feature = "mock-machine"))]
+use crate::extruder2::api::{LiveValuesEvent, StateEvent};
+#[cfg(not(feature = "mock-machine"))]
 use control_core::helpers::hasher_serializer::hash_with_serde_model;
 #[cfg(not(feature = "mock-machine"))]
 use control_core::socketio::event::BuildEvent;
@@ -24,7 +26,7 @@ use units::thermodynamic_temperature::ThermodynamicTemperature;
 use units::{angular_velocity::revolution_per_minute, thermodynamic_temperature::degree_celsius};
 
 #[cfg(not(feature = "mock-machine"))]
-use super::{ExtruderV3, ExtruderV3Mode, api::StateEvent};
+use super::{ExtruderV3, ExtruderV3Mode};
 
 #[cfg(not(feature = "mock-machine"))]
 impl ExtruderV3 {
@@ -176,15 +178,14 @@ impl ExtruderV3 {
         }
     }
 
-    pub fn emit_live_values(&mut self) {
+    pub fn get_live_values(&mut self) -> LiveValuesEvent {
         use std::time::Instant;
 
-        use crate::extruder2::api::{ExtruderV3Events, LiveValuesEvent};
         let now = Instant::now();
         let combined_power = self.calculate_combined_power();
         self.update_total_energy(combined_power, now);
 
-        let live_values = LiveValuesEvent {
+        LiveValuesEvent {
             motor_status: self.screw_speed_controller.get_motor_status().into(),
             pressure: self.screw_speed_controller.get_pressure().get::<bar>(),
             nozzle_temperature: self
@@ -221,9 +222,13 @@ impl ExtruderV3 {
                 .get_heating_element_wattage(),
             combined_power,
             total_energy_kwh: self.total_energy_kwh,
-        };
+        }
+    }
 
-        let event = live_values.build();
+    pub fn emit_live_values(&mut self) {
+        use crate::extruder2::api::ExtruderV3Events;
+
+        let event = self.get_live_values().build();
         self.namespace.emit(ExtruderV3Events::LiveValues(event));
     }