qitech-control/CHANGELOG.md

2.14.1

26.01.2026

Laser

-#1079 Fixed Overflowing of buffer for Graphs causing crashes

2.14.0

22.01.2026

General

• #1040 Added API for reading Machine Data

2.13.0

07.01.2026

General

• #925 Switch to Setup when selected machine is disconnected
• #937 Added minimal Support for WAGO
• #945 Improvements for On-Screen Keyboard usage in Ethercat Setup Page

Extruder V3

• #930 Added Extruder V3

Laser

• #924 Roundness is now displayed as a percentage
• #885 Added Min and Max Diameter
• #849 Added a Warning if Filament is out of Spec

Aquapath

• #976 Improved Stability

2.12.0

17.11.2025

General

• #847 Improved discovery and initialization
• #859 Improved update speed
• #897, #899, #852 Improved system stability
• #817 Added an update bar

Laser

• #857 Fixed potential issues with 2 Axis Laser

Extruder V2

• #881 Extended Temperature PID Configuration

2.11.0

21.10.2025

General

• #829, #834, Improved overall system stability

Winder V2

• #840 Added XL Winder option
• #827 Spool can now be run in reverse

Extruder V2

• #826 Fine grained Temperature-PID configuration now possible

2.10.0

16.10.2025

Winder V2

• #776 Added explanation for padding in winder manual
• #804 Added gearbox conversion

General

• #717 Show from option for graphs added
• #805 Graphs run better now

2.9.1

10.10.2025

Winder V2

• #796 Winding in adaptive mode, while puller is in reverse mode is now possible

General

• #780 Updates are faster now
• #746 Improved scrollbar styling for manuals

2.9.0

06.10.2025

Winder V2

• #778 Increased Winder Traverse Step size limit

General

• #725 Improved troubleshooting and update page
• #625 Improved stability of Machine-Connections

2.8.0

30.09.2025

Laser V1

• #741 Added roundness measurement to two-axis Laser

Winder V2

• #745, #756 improved Winder Frontend

General

• #447 added AquaPath Machine

2.7.0

17.09.2025

Extruder V2

• #695 Pressure and Rpm Regulation properly switch again

Winder V2

• #727 Removed estimated diameter

Laser V1

• #731 Added Laser with two-axis measurements

General

• #679,#677,#698, #684,#706 Greatly improved overall system latency and stability

• #720, #686 Improved User Interface

2.6.0

03.09.2025

Extruder V2

• #658 Added manual
• #639 Swapped order of screw speed regulation buttons

Laser V1

• #642 Improved stability of laser connection

General

• #657 Time frame for graphs is now remembered
• #641 Removed duplicate scrollbar from manuals

2.5.0

27.08.2025

Extruder V2

• #595 Simplified power graphs
• #593 Added identifiers for temperature sensors in temperature graph

Winder V2

• #598 Images now load properly in the manual

General

• #540 Improved readability of the presets
• #591 Significantly improved user interface performance and stability

2.4.0

14.08.2025

Winder V2

• #550 Can now reset wound distance while winding

General

• #568,#572, #574 Improved EtherCAT performance
• #588 Improved frontend performance

2.3.0

06.08.2025

Extruder V2

• #520 added warning message incase inverter is overloaded
• #501 raised pressure limit of pressured PID mode for extruder
• #519 added total power consumption monitor and graphs for voltage,current and wattage of the motor

Winder V2

• #64 added winder handbook

Laser V1

• #497 improved diameter visualisation

General

• #62,#524 added machine presets to load configurations
• #526 added import and export of presets

2.2.0

15.07.2025

Extruder V2

• #455, Greatly improved stability and precision of pressure-based regulation for the motor
• #467, #448, #485 Improved the Responsiveness for motor control and monitoring
• #138, Added a Warning in case the Pressure sensor is disconnected or incorrectly wired
• #169, Added a Confirmation Dialog when extruder has not reached 90% of target temperature

Winder V2

• #471, Added a live value to track the pulled distance and the option of switching to a different Mode after a given distance.

General

• #121, Use Linux realtime threads for EtherCAT and control loop (PREEMPT_RT)
• #138, Updated Quick Start Guide

2.1.0

30.06.2025

Extruder V2

• Intial Stable Release of Extruder V2

Winder V2

• #420, #401 Add Adaptive spool speed algorithm, the old algorithm is now called Minmax ans tillavailable.
• #427 Add Estimated Spool Diameter graph
• #419 Fix Issue where traverse won't work at low spool speed

Laser V1

• Initial Stable Release of Laser V1

HMI Panel

• #339 Don't go into sleep Mmde
• #410 Ship with Wireshark
• #424 Updates can be canceled

General

• #269, #370 Improved performace of live values
• #358, #343, #324, #390, #299 Improved functionality for graphs
• #405 Remove weird color behaviour on tocuhscreens
• #369 More failsafe EtherCAT loop

2.0.1

10.06.2025

2.0.0

10.06.2025

General

• Initial stable release of QiTech Control.

Winder V2

• Initial stable release of Winder V2

Features

• Stabilized Winder V2