diff --git a/electron/src/machines/extruder/HeatingZone.tsx b/electron/src/machines/extruder/HeatingZone.tsx
index bb9c7b0c..3b9e5bc7 100644
--- a/electron/src/machines/extruder/HeatingZone.tsx
+++ b/electron/src/machines/extruder/HeatingZone.tsx
@@ -16,6 +16,7 @@ type Props = {
   min: number;
   max: number;
   onChangeTargetTemp?: (temperature: number) => void;
+  targetTemperatureEnabled: boolean;
 };
 export function HeatingZone({
   title,
@@ -25,6 +26,7 @@ export function HeatingZone({
   heatingTimeSeries,
   heatingPower,
   onChangeTargetTemp,
+  targetTemperatureEnabled,
 }: Props) {
   const targetTemperature = heatingState?.target_temperature ?? 150;
 
@@ -41,19 +43,20 @@ export function HeatingZone({
             timeseries={heatingTimeSeries}
           />
         </div>
-
-        <Label label="Target Temperature">
-          <EditValue
-            value={targetTemperature}
-            defaultValue={150}
-            min={min}
-            max={max}
-            unit="C"
-            title="Target Temperature"
-            renderValue={(value) => roundToDecimals(value, 1)}
-            onChange={onChangeTargetTemp}
-          />
-        </Label>
+        {targetTemperatureEnabled && (
+          <Label label="Target Temperature">
+            <EditValue
+              value={targetTemperature}
+              defaultValue={150}
+              min={min}
+              max={max}
+              unit="C"
+              title="Target Temperature"
+              renderValue={(value) => roundToDecimals(value, 1)}
+              onChange={onChangeTargetTemp}
+            />
+          </Label>
+        )}
       </div>
 
       <TimeSeriesValueNumeric
@@ -65,7 +68,7 @@ export function HeatingZone({
         timeseries={heatingPower}
       />
 
-      {heatingState?.wiring_error && (
+      {heatingState?.wiring_error && targetTemperatureEnabled && (
         <StatusBadge variant="error">
           Cant Read Temperature! Check Temperature Sensor Wiring!
         </StatusBadge>
diff --git a/electron/src/machines/extruder/extruder2/Extruder2ControlPage.tsx b/electron/src/machines/extruder/extruder2/Extruder2ControlPage.tsx
index bee23818..c0c08835 100644
--- a/electron/src/machines/extruder/extruder2/Extruder2ControlPage.tsx
+++ b/electron/src/machines/extruder/extruder2/Extruder2ControlPage.tsx
@@ -68,10 +68,12 @@ export function Extruder2ControlPage() {
       backTemperature.current?.value ?? 0,
       state?.heating_states.back.target_temperature ?? 1,
     );
-    const nozzleReady = isZoneReadyForExtrusion(
-      nozzleTemperature.current?.value ?? 0,
-      state?.heating_states.nozzle.target_temperature ?? 1,
-    );
+    const nozzleReady =
+      !state?.extruder_settings_state.nozzle_temperature_target_enabled ||
+      isZoneReadyForExtrusion(
+        nozzleTemperature.current?.value ?? 0,
+        state?.heating_states.nozzle.target_temperature ?? 1,
+      );
 
     return frontReady && middleReady && backReady && nozzleReady;
   };
@@ -87,6 +89,7 @@ export function Extruder2ControlPage() {
           onChangeTargetTemp={setFrontHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={true}
         />
         <HeatingZone
           title={"Heating Middle"}
@@ -96,6 +99,7 @@ export function Extruder2ControlPage() {
           onChangeTargetTemp={setMiddleHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={true}
         />
         <HeatingZone
           title={"Heating Back"}
@@ -105,6 +109,7 @@ export function Extruder2ControlPage() {
           onChangeTargetTemp={setBackHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={true}
         />
         <HeatingZone
           title={"Heating Nozzle"}
@@ -114,6 +119,10 @@ export function Extruder2ControlPage() {
           onChangeTargetTemp={setNozzleHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={
+            state?.extruder_settings_state.nozzle_temperature_target_enabled ??
+            true
+          }
         />
         <ControlCard className="bg-red" title="Screw Drive">
           {state?.inverter_status_state.overload_warning == true ? (
diff --git a/electron/src/machines/extruder/extruder2/Extruder2Settings.tsx b/electron/src/machines/extruder/extruder2/Extruder2Settings.tsx
index 2184b4fc..71f13ff9 100644
--- a/electron/src/machines/extruder/extruder2/Extruder2Settings.tsx
+++ b/electron/src/machines/extruder/extruder2/Extruder2Settings.tsx
@@ -20,6 +20,7 @@ export function Extruder2SettingsPage() {
     setPressurePidKi,
     setPressurePidKd,
     setTemperaturePidValue,
+    setTemperatureTargetEnabled,
   } = useExtruder2();
 
   const [showAdvanced, setShowAdvanced] = useState(false);
@@ -68,6 +69,16 @@ export function Extruder2SettingsPage() {
             onChange={setExtruderPressureLimitEnabled}
           />
         </Label>
+        <Label label="Nozzle Temperature Target Enabled">
+          <SelectionGroupBoolean
+            value={
+              state?.extruder_settings_state.nozzle_temperature_target_enabled
+            }
+            optionTrue={{ children: "Enabled" }}
+            optionFalse={{ children: "Disabled" }}
+            onChange={setTemperatureTargetEnabled}
+          />
+        </Label>
         <Label label="Show Advanced PID Settings">
           <SelectionGroupBoolean
             value={showAdvanced}
diff --git a/electron/src/machines/extruder/extruder2/extruder2Namespace.ts b/electron/src/machines/extruder/extruder2/extruder2Namespace.ts
index ecbf8126..9a46e54e 100644
--- a/electron/src/machines/extruder/extruder2/extruder2Namespace.ts
+++ b/electron/src/machines/extruder/extruder2/extruder2Namespace.ts
@@ -109,6 +109,7 @@ export const heatingStatesSchema = z.object({
 export const extruderSettingsStateSchema = z.object({
   pressure_limit: z.number(),
   pressure_limit_enabled: z.boolean(),
+  nozzle_temperature_target_enabled: z.boolean(),
 });
 
 /**
diff --git a/electron/src/machines/extruder/extruder2/useExtruder.ts b/electron/src/machines/extruder/extruder2/useExtruder.ts
index 06c47bdf..beaaf5de 100644
--- a/electron/src/machines/extruder/extruder2/useExtruder.ts
+++ b/electron/src/machines/extruder/extruder2/useExtruder.ts
@@ -232,6 +232,20 @@ export function useExtruder2() {
     );
   };
 
+  const setTemperatureTargetEnabled = (enabled: boolean) => {
+    updateStateOptimistically(
+      (current) => {
+        current.data.extruder_settings_state.nozzle_temperature_target_enabled =
+          enabled;
+      },
+      () =>
+        requestNozzleTemperatureTargetEnabled({
+          machine_identification_unique: machineIdentification,
+          data: { SetNozzleTemperatureTargetEnabled: enabled },
+        }),
+    );
+  };
+
   const setPressurePidKp = (kp: number) => {
     updateStateOptimistically(
       (current) => {
@@ -381,6 +395,10 @@ export function useExtruder2() {
     z.object({ SetExtruderPressureLimitIsEnabled: z.boolean() }),
   );
 
+  const { request: requestNozzleTemperatureTargetEnabled } = useMachineMutation(
+    z.object({ SetNozzleTemperatureTargetEnabled: z.boolean() }),
+  );
+
   const { request: requestPressurePidSettings } = useMachineMutation(
     z.object({
       SetPressurePidSettings: z.object({
@@ -459,6 +477,7 @@ export function useExtruder2() {
     setPressurePidKi,
     setPressurePidKd,
     setTemperaturePidValue,
+    setTemperatureTargetEnabled,
     resetInverter,
   };
 }
diff --git a/electron/src/machines/extruder/extruder3/Extruder3ControlPage.tsx b/electron/src/machines/extruder/extruder3/Extruder3ControlPage.tsx
index a3fe8ec6..1d7663ae 100644
--- a/electron/src/machines/extruder/extruder3/Extruder3ControlPage.tsx
+++ b/electron/src/machines/extruder/extruder3/Extruder3ControlPage.tsx
@@ -68,10 +68,12 @@ export function Extruder3ControlPage() {
       backTemperature.current?.value ?? 0,
       state?.heating_states.back.target_temperature ?? 1,
     );
-    const nozzleReady = isZoneReadyForExtrusion(
-      nozzleTemperature.current?.value ?? 0,
-      state?.heating_states.nozzle.target_temperature ?? 1,
-    );
+    const nozzleReady =
+      !state?.extruder_settings_state.nozzle_temperature_target_enabled ||
+      isZoneReadyForExtrusion(
+        nozzleTemperature.current?.value ?? 0,
+        state?.heating_states.nozzle.target_temperature ?? 1,
+      );
 
     return frontReady && middleReady && backReady && nozzleReady;
   };
@@ -87,6 +89,7 @@ export function Extruder3ControlPage() {
           onChangeTargetTemp={setFrontHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={true}
         />
         <HeatingZone
           title={"Heating Middle"}
@@ -96,6 +99,7 @@ export function Extruder3ControlPage() {
           onChangeTargetTemp={setMiddleHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={true}
         />
         <HeatingZone
           title={"Heating Back"}
@@ -105,6 +109,7 @@ export function Extruder3ControlPage() {
           onChangeTargetTemp={setBackHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={true}
         />
         <HeatingZone
           title={"Heating Nozzle"}
@@ -114,6 +119,10 @@ export function Extruder3ControlPage() {
           onChangeTargetTemp={setNozzleHeatingTemperature}
           min={0}
           max={300}
+          targetTemperatureEnabled={
+            state?.extruder_settings_state.nozzle_temperature_target_enabled ??
+            true
+          }
         />
         <ControlCard className="bg-red" title="Screw Drive">
           {state?.inverter_status_state.overload_warning == true ? (
diff --git a/electron/src/machines/extruder/extruder3/Extruder3Settings.tsx b/electron/src/machines/extruder/extruder3/Extruder3Settings.tsx
index c55cfb1d..045bcbc3 100644
--- a/electron/src/machines/extruder/extruder3/Extruder3Settings.tsx
+++ b/electron/src/machines/extruder/extruder3/Extruder3Settings.tsx
@@ -20,6 +20,7 @@ export function Extruder3SettingsPage() {
     setPressurePidKi,
     setPressurePidKd,
     setTemperaturePidValue,
+    setTemperatureTargetEnabled,
   } = useExtruder3();
 
   const [showAdvanced, setShowAdvanced] = useState(false);
@@ -68,6 +69,16 @@ export function Extruder3SettingsPage() {
             onChange={setExtruderPressureLimitEnabled}
           />
         </Label>
+        <Label label="Nozzle Temperature Target Enabled">
+          <SelectionGroupBoolean
+            value={
+              state?.extruder_settings_state.nozzle_temperature_target_enabled
+            }
+            optionTrue={{ children: "Enabled" }}
+            optionFalse={{ children: "Disabled" }}
+            onChange={setTemperatureTargetEnabled}
+          />
+        </Label>
         <Label label="Show Advanced PID Settings">
           <SelectionGroupBoolean
             value={showAdvanced}
diff --git a/electron/src/machines/extruder/extruder3/extruder3Namespace.ts b/electron/src/machines/extruder/extruder3/extruder3Namespace.ts
index 04ecff0b..b8fa2ea3 100644
--- a/electron/src/machines/extruder/extruder3/extruder3Namespace.ts
+++ b/electron/src/machines/extruder/extruder3/extruder3Namespace.ts
@@ -109,6 +109,7 @@ export const heatingStatesSchema = z.object({
 export const extruderSettingsStateSchema = z.object({
   pressure_limit: z.number(),
   pressure_limit_enabled: z.boolean(),
+  nozzle_temperature_target_enabled: z.boolean(),
 });
 
 /**
diff --git a/electron/src/machines/extruder/extruder3/useExtruder.ts b/electron/src/machines/extruder/extruder3/useExtruder.ts
index 869a5ac8..7587b44e 100644
--- a/electron/src/machines/extruder/extruder3/useExtruder.ts
+++ b/electron/src/machines/extruder/extruder3/useExtruder.ts
@@ -232,6 +232,28 @@ export function useExtruder3() {
     );
   };
 
+  const setTemperatureTargetEnabled = (enabled: boolean) => {
+    const res = enabled
+      ? true
+      : confirm(
+          "This will disable the ability to set a temperature target for the nozzle heating element and will any wiring error message. Only proceed if you understand the risks.",
+        );
+
+    if (res) {
+      updateStateOptimistically(
+        (current) => {
+          current.data.extruder_settings_state.nozzle_temperature_target_enabled =
+            enabled;
+        },
+        () =>
+          requestNozzleTemperatureTargetEnabled({
+            machine_identification_unique: machineIdentification,
+            data: { SetNozzleTemperatureTargetEnabled: enabled },
+          }),
+      );
+    }
+  };
+
   const setPressurePidKp = (kp: number) => {
     updateStateOptimistically(
       (current) => {
@@ -381,6 +403,10 @@ export function useExtruder3() {
     z.object({ SetExtruderPressureLimitIsEnabled: z.boolean() }),
   );
 
+  const { request: requestNozzleTemperatureTargetEnabled } = useMachineMutation(
+    z.object({ SetNozzleTemperatureTargetEnabled: z.boolean() }),
+  );
+
   const { request: requestPressurePidSettings } = useMachineMutation(
     z.object({
       SetPressurePidSettings: z.object({
@@ -455,6 +481,7 @@ export function useExtruder3() {
     setMiddleHeatingTemperature,
     setExtruderPressureLimit,
     setExtruderPressureLimitEnabled,
+    setTemperatureTargetEnabled,
     setPressurePidKp,
     setPressurePidKi,
     setPressurePidKd,
diff --git a/machines/src/extruder1/api.rs b/machines/src/extruder1/api.rs
index abc559c6..4b196fa0 100644
--- a/machines/src/extruder1/api.rs
+++ b/machines/src/extruder1/api.rs
@@ -152,6 +152,7 @@ pub struct HeatingState {
 pub struct ExtruderSettingsState {
     pub pressure_limit: f64,
     pub pressure_limit_enabled: bool,
+    pub nozzle_temperature_target_enabled: bool,
 }
 
 #[derive(Serialize, Debug, Clone, PartialEq, Eq)]
@@ -237,6 +238,9 @@ pub enum Mutation {
 
     // Reset
     ResetInverter(bool),
+
+    // Toggle nozzle temperature target
+    SetNozzleTemperatureTargetEnabled(bool),
 }
 
 #[derive(Debug)]
@@ -317,6 +321,9 @@ impl MachineApi for ExtruderV2 {
             Mutation::SetTemperaturePidSettings(settings) => {
                 self.configure_temperature_pid(settings);
             }
+            Mutation::SetNozzleTemperatureTargetEnabled(enabled) => {
+                self.set_nozzle_temperature_target_is_enabled(enabled);
+            }
         }
         Ok(())
     }
diff --git a/machines/src/extruder1/emit.rs b/machines/src/extruder1/emit.rs
index 7246c08b..a61c22c6 100644
--- a/machines/src/extruder1/emit.rs
+++ b/machines/src/extruder1/emit.rs
@@ -94,6 +94,9 @@ impl ExtruderV2 {
                 pressure_limit_enabled: self
                     .screw_speed_controller
                     .get_nozzle_pressure_limit_enabled(),
+                nozzle_temperature_target_enabled: self
+                    .temperature_controller_nozzle
+                    .get_temperature_target_enabled(),
             },
             inverter_status_state: InverterStatusState {
                 running: self.screw_speed_controller.inverter.status.running,
@@ -296,6 +299,12 @@ impl ExtruderV2 {
         self.emit_state();
     }
 
+    pub fn set_nozzle_temperature_target_is_enabled(&mut self, enabled: bool) {
+        self.temperature_controller_nozzle
+            .set_temperature_target_enabled(enabled);
+        self.emit_state();
+    }
+
     pub fn configure_pressure_pid(&mut self, settings: PidSettings) {
         self.screw_speed_controller
             .pid
diff --git a/machines/src/extruder1/mock/api.rs b/machines/src/extruder1/mock/api.rs
index 91bf7720..6789353c 100644
--- a/machines/src/extruder1/mock/api.rs
+++ b/machines/src/extruder1/mock/api.rs
@@ -41,6 +41,9 @@ impl MachineApi for ExtruderV2 {
             Mutation::SetTemperaturePidSettings(settings) => {
                 self.configure_temperature_pid(settings);
             }
+            Mutation::SetNozzleTemperatureTargetEnabled(enabled) => {
+                self.set_nozzle_temperature_target_is_enabled(enabled);
+            }
         }
         Ok(())
     }
diff --git a/machines/src/extruder1/mock/mock_emit.rs b/machines/src/extruder1/mock/mock_emit.rs
index a7249aca..69799372 100644
--- a/machines/src/extruder1/mock/mock_emit.rs
+++ b/machines/src/extruder1/mock/mock_emit.rs
@@ -130,6 +130,12 @@ impl ExtruderV2 {
         self.emit_state();
     }
 
+    pub fn set_nozzle_temperature_target_is_enabled(&mut self, enabled: bool) {
+        self.extruder_settings_state
+            .nozzle_temperature_target_enabled = enabled;
+        self.emit_state();
+    }
+
     pub fn configure_pressure_pid(&mut self, settings: PidSettings) {
         self.pid_settings.pressure.ki = settings.ki;
         self.pid_settings.pressure.kp = settings.kp;
diff --git a/machines/src/extruder1/mock/new.rs b/machines/src/extruder1/mock/new.rs
index 5d94c09e..f16ff96c 100644
--- a/machines/src/extruder1/mock/new.rs
+++ b/machines/src/extruder1/mock/new.rs
@@ -81,6 +81,7 @@ impl MachineNewTrait for ExtruderV2 {
             extruder_settings_state: ExtruderSettingsState {
                 pressure_limit: 200.0,
                 pressure_limit_enabled: false,
+                nozzle_temperature_target_enabled: true,
             },
             inverter_status_state: InverterStatusState {
                 running: false,
diff --git a/machines/src/extruder1/temperature_controller.rs b/machines/src/extruder1/temperature_controller.rs
index 976638d1..52b609a3 100644
--- a/machines/src/extruder1/temperature_controller.rs
+++ b/machines/src/extruder1/temperature_controller.rs
@@ -20,6 +20,7 @@ pub struct TemperatureController {
     temperature_pid_output: f64,
     heating_element_wattage: f64,
     max_clamp: f64,
+    target_temp_enabled: bool, // Sets whether the frontend should display a target temperature setter for this temp controller
 }
 
 impl TemperatureController {
@@ -55,6 +56,7 @@ impl TemperatureController {
             temperature_pid_output: 0.0,
             heating_element_wattage,
             max_clamp,
+            target_temp_enabled: true,
         }
     }
 
@@ -62,6 +64,14 @@ impl TemperatureController {
         self.heating.target_temperature = temp;
     }
 
+    pub fn set_temperature_target_enabled(&mut self, enabled: bool) {
+        self.target_temp_enabled = enabled;
+    }
+
+    pub fn get_temperature_target_enabled(&self) -> bool {
+        self.target_temp_enabled
+    }
+
     pub const fn disallow_heating(&mut self) {
         self.heating_allowed = false;
     }
diff --git a/machines/src/extruder2/api.rs b/machines/src/extruder2/api.rs
index f480bcba..605582d0 100644
--- a/machines/src/extruder2/api.rs
+++ b/machines/src/extruder2/api.rs
@@ -143,6 +143,9 @@ pub enum Mutation {
     SetExtruderPressureLimit(f64),
     SetExtruderPressureLimitIsEnabled(bool),
 
+    // ToggleTemperatureTarget
+    SetNozzleTemperatureTargetEnabled(bool),
+
     // Pid Configure
     SetPressurePidSettings(PidSettings),
     SetTemperaturePidSettings(TemperaturePid),
@@ -203,7 +206,6 @@ impl MachineApi for ExtruderV3 {
             Mutation::SetInverterTargetPressure(bar) => self.set_target_pressure(bar),
             Mutation::SetInverterTargetRpm(rpm) => self.set_target_rpm(rpm),
             Mutation::ResetInverter(_) => self.reset_inverter(),
-
             Mutation::SetFrontHeatingTargetTemperature(temp) => {
                 self.set_target_temperature(temp, HeatingType::Front)
             }
@@ -222,14 +224,15 @@ impl MachineApi for ExtruderV3 {
             Mutation::SetExtruderPressureLimitIsEnabled(enabled) => {
                 self.set_nozzle_pressure_limit_is_enabled(enabled);
             }
-
             Mutation::SetPressurePidSettings(settings) => {
                 self.configure_pressure_pid(settings);
             }
-
             Mutation::SetTemperaturePidSettings(settings) => {
                 self.configure_temperature_pid(settings);
             }
+            Mutation::SetNozzleTemperatureTargetEnabled(enabled) => {
+                self.set_nozzle_temperature_target_is_enabled(enabled);
+            }
         }
         Ok(())
     }
diff --git a/machines/src/extruder2/emit.rs b/machines/src/extruder2/emit.rs
index d409e36b..61039414 100644
--- a/machines/src/extruder2/emit.rs
+++ b/machines/src/extruder2/emit.rs
@@ -102,6 +102,9 @@ impl ExtruderV3 {
                 pressure_limit_enabled: self
                     .screw_speed_controller
                     .get_nozzle_pressure_limit_enabled(),
+                nozzle_temperature_target_enabled: self
+                    .temperature_controller_nozzle
+                    .get_temperature_target_enabled(),
             },
             inverter_status_state: InverterStatusState {
                 running: self.screw_speed_controller.inverter.status.running,
@@ -240,6 +243,12 @@ impl ExtruderV3 {
         self.emit_state();
     }
 
+    pub fn set_nozzle_temperature_target_is_enabled(&mut self, enabled: bool) {
+        self.temperature_controller_nozzle
+            .set_temperature_target_enabled(enabled);
+        self.emit_state();
+    }
+
     pub fn set_nozzle_pressure_limit(&mut self, pressure: f64) {
         self.screw_speed_controller
             .set_nozzle_pressure_limit(Pressure::new::<bar>(pressure));
diff --git a/machines/src/extruder2/mock/api.rs b/machines/src/extruder2/mock/api.rs
index 91bf7720..6789353c 100644
--- a/machines/src/extruder2/mock/api.rs
+++ b/machines/src/extruder2/mock/api.rs
@@ -41,6 +41,9 @@ impl MachineApi for ExtruderV2 {
             Mutation::SetTemperaturePidSettings(settings) => {
                 self.configure_temperature_pid(settings);
             }
+            Mutation::SetNozzleTemperatureTargetEnabled(enabled) => {
+                self.set_nozzle_temperature_target_is_enabled(enabled);
+            }
         }
         Ok(())
     }
diff --git a/machines/src/extruder2/mock/mock_emit.rs b/machines/src/extruder2/mock/mock_emit.rs
index 1bd50b2b..6b1e7e82 100644
--- a/machines/src/extruder2/mock/mock_emit.rs
+++ b/machines/src/extruder2/mock/mock_emit.rs
@@ -128,6 +128,12 @@ impl ExtruderV2 {
         self.emit_state();
     }
 
+    pub fn set_nozzle_temperature_target_is_enabled(&mut self, enabled: bool) {
+        self.extruder_settings_state
+            .nozzle_temperature_target_enabled = enabled;
+        self.emit_state();
+    }
+
     pub fn configure_pressure_pid(&mut self, settings: PidSettings) {
         self.pid_settings.pressure.ki = settings.ki;
         self.pid_settings.pressure.kp = settings.kp;
diff --git a/machines/src/extruder2/mock/new.rs b/machines/src/extruder2/mock/new.rs
index fcfb3c41..e99332fd 100644
--- a/machines/src/extruder2/mock/new.rs
+++ b/machines/src/extruder2/mock/new.rs
@@ -81,6 +81,7 @@ impl MachineNewTrait for ExtruderV2 {
             extruder_settings_state: ExtruderSettingsState {
                 pressure_limit: 200.0,
                 pressure_limit_enabled: false,
+                nozzle_temperature_target_enabled: true,
             },
             inverter_status_state: InverterStatusState {
                 running: false,